Page 1 of 1

Allo Web GUI not working in latest release

Posted: Fri Sep 17, 2021 2:26 pm
by mprince
I updated my RaspberryPi 3B+/Allo Digione to the latest distribution, which included the Allo GUI. However, when I try to open the GUI on both Windows PC's as well as an Android device, I get a host of connection.php errors. Wasn't sure if this had been identified yet, or if a fix was in the works, so figured I would post here to get visibility. Other than this issue the new release is working perfectly.

Thanks,
Mike

Re: Allo Web GUI not working in latest release

Posted: Fri Sep 17, 2021 3:07 pm
by Joulinar
pls could you share

DietPi version | cat /boot/dietpi/.version
Distro version | echo $G_DISTRO_NAME $G_RASPBIAN
Kernel version | uname -a
SBC model | echo $G_HW_MODEL_NAME

as well can you share installed software pls

Code: Select all

dietpi-software list | grep " =2 "

Re: Allo Web GUI not working in latest release

Posted: Fri Sep 17, 2021 6:53 pm
by mprince
Sure, sorry about not including this in the original message:

DietPi Version:
G_DIETPI_VERSION_CORE=7
G_DIETPI_VERSION_SUB=5
G_DIETPI_VERSION_RC=2
G_GITBRANCH='master'
G_GITOWNER='MichaIng'
G_LIVE_PATCH_STATUS[0]='applied'

Distro Version:
bullseye 0

Kernel Version:
Linux DietPi 5.10.60-v7+ #1449 SMP Wed Aug 25 15:00:01 BST 2021 armv7l GNU/Linux

SBC Model:
RPi 3 Model B+ (armv7l)

Re: Allo Web GUI not working in latest release

Posted: Fri Sep 17, 2021 6:54 pm
by mprince
Installed software is:

Code: Select all

ID 5 | =2 | ALSA: Advanced Linux Sound Architecture |
ID 35 | =2 | Logitech Media Server: aka SlimServer, SqueezeCenter, Squeezebox Server | | https://dietpi.com/docs/software/media/#logitech-media-server
ID 36 | =2 | Squeezelite: audio player for lms & squeezebox | +ALSA | p=1009#p1009
ID 37 | =2 | Shairport Sync: airplay audio player with multiroom sync | +ALSA +Avahi-Daemon | https://dietpi.com/docs/software/media/#shairport-sync
ID 65 | =2 | Netdata: real-time performance monitoring | | https://dietpi.com/docs/software/system_stats/#netdata
ID 82 | =2 | LLMP: Lighttpd | MariaDB | PHP | +Lighttpd +MariaDB +PHP | https://dietpi.com/docs/software/webserver_stack/#llmp-web-stack
ID 84 | =2 | Lighttpd: Extremely lightweight webserver | +PHP | https://dietpi.com/docs/software/webserver_stack/#lighttpd
ID 88 | =2 | MariaDB: Persistent cached file-per-table database server | | https://dietpi.com/docs/software/databases/#mariadb
ID 89 | =2 | PHP: Hypertext Preprocessor for dynamic web content | | https://dietpi.com/docs/software/webserver_stack/#php
ID 96 | =2 | Samba Server: Feature-rich SMB/CIFS server | | https://dietpi.com/docs/software/file_servers/#samba
ID 103 | =2 | DietPi-RAMlog: Makes /var/log a RAM disk, preserves file structure on reboot | | https://dietpi.com/docs/software/log_system/#dietpi-ramlog
ID 104 | =2 | Dropbear: Lightweight SSH server | | https://dietpi.com/docs/software/ssh/#dropbear
ID 121 | =2 | Roon Bridge: Turns device into Roon capable audio player | +ALSA | https://dietpi.com/docs/software/media/#roon-bridge
ID 124 | =2 | NAA daemon: signalyst network audio adaptor (naa) | +ALSA | https://dietpi.com/docs/software/media/#naa-daemon
ID 128 | =2 | MPD: music player daemon | +ALSA +Avahi-Daemon
ID 129 | =2 | O!MPD: feature-rich, web interface audio player for mpd | +ALSA +MariaDB +PHP +MPD +youtube-dl +webserver | https://dietpi.com/docs/software/media/#ompd
ID 152 | =2 | Avahi-Daemon: hostname broadcast (mac, pc bonjour) |
ID 159 | =2 | Allo: web interface | +ALSA +Squeezelite +Shairport Sync +Netdata +MariaDB +PHP +Samba Server +Roon Bridge +NAA daemon +MPD +O!MPD +Avahi-Daemon +GMediaRender +webserver | https://dietpi.com/phpbb/viewtopic.php?t=2317
ID 160 | =2 | Allo_update: quick reinstall/update web only |
ID 163 | =2 | GMediaRender: Resource efficient UPnP/DLNA renderer | +ALSA +Avahi-Daemon | https://dietpi.com/docs/software/media/#gmediarender

Re: Allo Web GUI not working in latest release

Posted: Fri Sep 17, 2021 8:52 pm
by mprince
I took the easy way out - I re-downloaded the image and wrote it to another SD card. Everything now seems to be working including the Allo dashboard. If it is helpful, it appears that mariadb had a loading error in the previous install (this also seems to be resolved with a clean install).

Regards
Mike