Creating a bug report/issue
I have searched the existing open and closed issues
Required Information
- DietPi version |
cat /boot/dietpi/.version
G_DIETPI_VERSION_CORE=9
G_DIETPI_VERSION_SUB=0
G_DIETPI_VERSION_RC=2
G_GITBRANCH=‘master’
G_GITOWNER=‘MichaIng’ - Distro version |
echo $G_DISTRO_NAME $G_RASPBIAN
bookworm - Kernel version |
uname -a
Linux DietPi 6.1.63-current-rockchip64 #1 SMP PREEMPT Mon Nov 20 10:52:19 UTC 2023 aarch64 GNU/Linux - Architecture |
dpkg --print-architecture
arm64 - SBC model |
echo $G_HW_MODEL_NAME
or (EG: RPi3)
ROCK Pi S (aarch64) - Power supply used | (EG: 5V 1A RAVpower)
USB A to USB C - SD card used | (EG: SanDisk ultra)
San Disk Ultra 32 GB
I am unable to figure what steps I must complete to enable SPI interface on a Rockpi S board running Dietpi version 9.0.2. i have added the following lines to /boot/dietpiEnv.txt. What else I need to do?
Please let me know.
overlays=spi-spidev
param_spidev_spi_bus=0
param_spidev_spi_cs=0
param_spidev_max_freq=10000000