Servus liebe Leute,
ich bin neu hier und sage mal freundlich hallo, nachdem discobot mich das gelehrt hat.
Ich bin auf der Suche nach dem Download, den es mal auf dieser Seite gegeben hat: http://dietpi.com/downloads/misc/community/install_odroid_hifishield2.sh
weil ich mein Hifi-Shield an meinem Odroid C2 aktivieren möchte.
Ich bin über diese Seite an den Link gekommen: https://forum.odroid.com/viewtopic.php?f=118&t=24415
Vll. kann mir hier jemand weiterhelfen, die Module für den Kernel machen mir Probleme.
bei deinem eigentlichen Problem kann ich dir leider nicht helfen, da mein C2 im 24/7 Betrieb läuft und kein Shield drauf hat.
Aber was möchtest du denn genau tun mit der SHield? Musik streamen an deinen Verstärker, oder als Videostreamer Audioausgabe an den Verstärker?
Ich muss sagen ich würde aktuell jedem empfehlen als Streamer/Musicplayer einen Raspi zu nehmen, die Preise sind wieder normal, und die UNterstützung einfach besser.
Und deinen C2 als 24/7 Betrieb mit Pihole und als Sambaserver mit angehängter USB-M2.Sataplatte, das läuft bei mir unter Dietpi perfekt, langzeitstabil und deutlich stromsparender als ein Pi4.
Gruß, Thomas
ADMIN EDIT translated into Englisch using DeepL
Hi 3MF,
Unfortunately I can’t help you with your actual problem, as my C2 runs 24/7 and doesn’t have a shield on it.
But what exactly do you want to do with the SHield? Stream music to your amplifier, or output audio to the amplifier as a video streamer?
I have to say I would currently recommend everyone to use a Raspi as a streamer/music player, the prices are normal again and the support is simply better.
And your C2 as a 24/7 operation with Pihole and as a samba server with attached USB-M2.Sataplatte, which runs perfectly under Dietpi, long-term stable and much more power-saving than a Pi4.
Servus Thomas,
vielen Dank für deine Stellungnahme!
Es soll ein Projekt zur Musikproduktion sein, also als mobiles MIDI Center. Dafür soll der C2 einen Audio output bekommen, geplant ist auch noch das Boom Bonnet einzubauen. Das ganze soll dann mit einem 5" Display in ein DIY Gehäuse.
ADMIN EDIT translated into Englisch using DeepL
Hello Thomas,
Thank you very much for your comment!
It will be a project for music production, i.e. as a mobile MIDI centre. The C2 is to have an audio output for this, and there are also plans to install the Boom Bonnet. The whole thing will then be housed in a DIY case with a 5" display.
Yeah, did it yesterday, still waiting for validating new account.
So far it seems best way to change to dietpi, read that version 8 supports hifi-shield again.
But I will need to use GUI desktop. Are there any guides how to install on diet?