Issue installing on HPT620 SSD Topic is solved

Having issues with your DietPi installation or found a bug? Post it here.
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Issue installing on HPT620 SSD

Post by TommySharpNZ »

I've used Balena Etcher to put the latest native PC BIOS Bullseye version onto a SSD. I boot the machine and can conneft fine with Putty etc.. I go through the steps of changing the default passwords and then just run the install without selecting any software.... Have tried a couple of times but just keep getting this...

Any help or tips would be appreciated... I have DietPi running on 2 raspberry Pis without any issues.

Code: Select all

APT install for: amd64-microcode                                                                                 │
│  - Command: apt-get -qq --allow-change-held-packages install amd64-microcode                                     │
│  - Exit code: 100                                                                                                │
│  - DietPi version: v7.8.2 (MichaIng/master) | HW_MODEL: 21 | HW_ARCH: 10 | DISTRO: 6                             │
│  - Image creator: DietPi Core Team                                                                               │
│  - Pre-image: from scratch                                                                                       │
│  - Error log:                                                                                                    │
│ debconf: delaying package configuration, since apt-utils is not installed                                        │
│ Selecting previously unselected package amd64-microcode.^M                                                       │
│ (Reading database ... ^M(Reading database ... 5%^M(Reading database ... 10%^M(Reading database ... 15%^M(Reading │
│ database ... 20%^M(Reading database ... 25%^M(Reading database ... 30%^M(Reading database ... 35%^M(Reading data │
│ 40%^M(Reading database ... 45%^M(Reading database ... 50%^M(Reading database ... 55%^M(Reading database ... 60%^M│
│ database ... 65%^M(Reading database ... 70%^M(Reading database ... 75%^M(Reading database ... 80%^M(Reading data │
│ 85%^M(Reading database ... 90%^M(Reading database ... 95%^M(Reading database ... 100%^M(Reading database ... 247 │
│ and directories currently installed.)^M                                                                          │
│ Preparing to unpack .../amd64-microcode_3.20191218.1_amd64.deb ...^M                                             │
│ Unpacking amd64-microcode (3.20191218.1) ...^M                                                                   │
│ Setting up amd64-microcode (3.20191218.1) ...^M                                                                  │
│ update-initramfs: deferring update (trigger activated)^M                                                         │
│ amd64-microcode: microcode will be updated at next boot^M                                                        │
│ Processing triggers for initramfs-tools (0.140) ...^M                                                            │
│ ln: failed to create hard link '/boot/initrd.img-5.10.0-9-amd64.dpkg-bak' => '/boot/initrd.img-5.10.0-9-amd64':  │
│ Operation not permitted^M                                                                                        │
│ update-initramfs: Generating /boot/initrd.img-5.10.0-9-amd64^M                                                   │
│ ^M                                                                                                               │
│ gzip: stdout: No space left on device^M                                                                          │
│ E: mkinitramfs failure gzip 1^M                                                                                  │
│ update-initramfs: failed for /boot/initrd.img-5.10.0-9-amd64 with 1.^M                                           │
│ dpkg: error processing package initramfs-tools (--configure):^M                                                  │
│  installed initramfs-tools package post-installation script subprocess returned error exit status 1^M            │
│ Errors were encountered while processing:^M                                                                      │
│  initramfs-tools^M                                                                                               │
│ E: Sub-process /usr/bin/dpkg returned an error code (1)                        
User avatar
Joulinar
Posts: 6525
Joined: Sat Nov 16, 2019 12:49 am

Re: Issue installing on HPT620 SSD

Post by Joulinar »

well your file system is full

Code: Select all

gzip: stdout: No space left on device
probably the rootFS partition did not got extended? Can you share following.

Code: Select all

lsblk -o name,fstype,label,size,ro,type,mountpoint,partuuid,uuid
df -h
as well the following log files located in /var/tmp/dietpi/logs

Code: Select all

dietpi-firstboot.log
dietpi-firstrun-setup.log
fs_partition_resize.log
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

Code: Select all

NAME FSTYPE LABEL  SIZE RO TYPE MOUNTPOINT PARTUUID                             UUID
sda               14.9G  0 disk
├─sda1
│    vfat          128M  0 part /boot      5e6dffe7-01                          C3E6-D424
└─sda2
     ext4         14.8G  0 part /          5e6dffe7-02                          4d7e9d38-16ca-4131-aa23-216cc12c9412
Filesystem      Size  Used Avail Use% Mounted on
udev            1.7G     0  1.7G   0% /dev
tmpfs           336M  4.9M  331M   2% /run
/dev/sda2        15G  1.3G   13G   9% /
tmpfs           1.7G     0  1.7G   0% /dev/shm
tmpfs           5.0M     0  5.0M   0% /run/lock
tmpfs           1.7G  8.0K  1.7G   1% /tmp
tmpfs            50M   56K   50M   1% /var/log
/dev/sda1       127M   82M   45M  66% /boot
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

Code: Select all

Removed /etc/systemd/system/local-fs.target.wants/dietpi-fs_partition_resize.service.
Disk /dev/sda: 14.91 GiB, 16013942784 bytes, 31277232 sectors
Disk model: SanDisk SDSA6MM-
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x5e6dffe7

Old situation:

Device     Boot  Start     End Sectors  Size Id Type
/dev/sda1  *      2048  264191  262144  128M  c W95 FAT32 (LBA)
/dev/sda2       264192 2623487 2359296  1.1G 83 Linux

/dev/sda2:
New situation:
Disklabel type: dos
Disk identifier: 0x5e6dffe7

Device     Boot  Start      End  Sectors  Size Id Type
/dev/sda1  *      2048   264191   262144  128M  c W95 FAT32 (LBA)
/dev/sda2       264192 31277231 31013040 14.8G 83 Linux

The partition table has been altered.
resize2fs 1.46.2 (28-Feb-2021)
Filesystem at /dev/sda2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 2
The filesystem on /dev/sda2 is now 3876630 (4k) blocks long.
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

Code: Select all

[ INFO ] DietPi-FirstBoot | Setting time zone Europe/London. Please wait...
removed '/etc/localtime'

Current default time zone: 'Europe/London'
Local time is now:      Thu Nov 18 10:57:08 GMT 2021.
Universal Time is now:  Thu Nov 18 10:57:08 UTC 2021.

[ SUB1 ] DietPi-Set_hardware > eth-forcespeed (disable)
[  OK  ] eth-forcespeed disable | Completed
[  OK  ] DietPi-Change_hostname | Desired setting in /etc/hosts was already set: 127.0.1.1 DietPi
[ .... ] DietPi-Change_hostname | hostname DietPi
[  OK  ] DietPi-Change_hostname | hostname DietPi
[ SUB1 ] DietPi-Set_software > apt-mirror (https://deb.debian.org/debian/)
[  OK  ] DietPi-Set_software | Desired setting in /boot/dietpi.txt was already set: CONFIG_APT_DEBIAN_MIRROR=https:>
[  OK  ] apt-mirror https://deb.debian.org/debian/ | Completed
removed '/etc/dropbear/dropbear_ecdsa_host_key'
Generating 256 bit ecdsa key, this may take a while...
Public key portion is:
ecdsa-sha2-nistp256 AAAAE2VjZHNhLXNoYTItbmlzdHAyNTYAAAAIbmlzdHAyNTYAAABBBNbEIm2pUs7y8XtkaHuRBK7Lqf0mzlbJBE4RwDLHu6Y>
Fingerprint: sha1!! cd:a2:c9:b8:6f:58:99:68:ca:89:3b:11:10:ca:90:26:6f:d3:13:2d
removed '/etc/dropbear/dropbear_ed25519_host_key'
Generating 256 bit ed25519 key, this may take a while...
Public key portion is:
ssh-ed25519 AAAAC3NzaC1lZDI1NTE5AAAAILorZiuTt4OFNXoGYx/Cf903CJuk3Y+Z/cX/YruKPoXD root@DietPi
Fingerprint: sha1!! 35:5a:ec:58:65:14:64:de:24:5f:59:d2:c4:39:a7:cb:04:7e:47:ef
removed '/etc/dropbear/dropbear_rsa_host_key'
Generating 2048 bit rsa key, this may take a while...
Public key portion is:
ssh-rsa AAAAB3NzaC1yc2EAAAADAQABAAABAQCg6UkgdtXe6Y2KDGvcgOevzh8ohkp/l3p0PXUISygeEeOPRDodGD45WrEzMahCwXGdEWZDds193Vg>
Fingerprint: sha1!! c5:88:10:df:9c:b6:0f:b3:0b:48:15:52:e1:98:52:dc:12:9f:e3:ad
Initializing machine ID from random generator.
[ SUB1 ] DietPi-Set_hardware > wifimodules (disable)
[  OK  ] wifimodules disable | Completed
[ SUB1 ] DietPi-Set_hardware > enableipv6 (enable)
[  OK  ] DietPi-Set_hardware | Desired setting in /etc/hosts was already set: ::1 localhost ip6-localhost ip6-loopb>
[  OK  ] DietPi-Set_hardware | Desired setting in /etc/hosts was already set: ff02::1 ip6-allnodes
[  OK  ] DietPi-Set_hardware | Desired setting in /etc/hosts was already set: ff02::2 ip6-allrouters
[  OK  ] DietPi-Set_hardware | Desired setting in /boot/dietpi.txt was already set: CONFIG_ENABLE_IPV6=1
[  OK  ] enableipv6 enable | Completed
[ SUB1 ] DietPi-Set_hardware > preferipv4 (enable)
[  OK  ] DietPi-Set_hardware | Desired setting in /etc/wgetrc was already set: prefer-family = IPv4
[  OK  ] DietPi-Set_hardware | Desired setting in /boot/dietpi.txt was already set: CONFIG_PREFER_IPV4=1
[  OK  ] preferipv4 enable | Completed
Internet Systems Consortium DHCP Client 4.4.1
Copyright 2004-2018 Internet Systems Consortium.
All rights reserved.
For info, please visit https://www.isc.org/software/dhcp/

Listening on LPF/eth0/7c:d3:0a:19:84:c4
Sending on   LPF/eth0/7c:d3:0a:19:84:c4
Sending on   Socket/fallback
Created duid "\000\001\000\001)(\356\010|\323\012\031\204\304".
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5
DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 6
DHCPOFFER of 192.168.10.165 from 192.168.10.1
DHCPREQUEST for 192.168.10.165 on eth0 to 255.255.255.255 port 67
DHCPACK of 192.168.10.165 from 192.168.10.1
bound to 192.168.10.165 -- renewal in 34977 seconds.
Removed /etc/systemd/system/multi-user.target.wants/dietpi-firstboot.service.
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

Code: Select all

 Step:^[[0m Applying initial first run setup steps

^[[0m^[[0m
^[[J^[[90m[^[[0m^[[33m SUB1 ^[[90m]^[[0m DietPi-Set_software > passwords
^[[0m^[[?1049h^[[22;0;0t^[[1;52r^[[4l^[[?25l^[(B^[[m^[[37m^[[40m^[[1;52r^[[H^[[2J^[[1;1H^[[1m^[[37m^[[44m          >
^[[K
^[[?1049l^[[23;0;0t^[[?1049h^[[22;0;0t^[[1;52r^[[4l^[[?25l^[(B^[[m^[[37m^[[40m^[[1;52r^[[H^[[2J^[[1;1H^[[1m^[[37m^[>
^[[K
^[[?1049l^[[23;0;0t^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m passwords  | Completed
^[[0m^[[?1049h^[[22;0;0t^[[1;52r^[[4l^[[?25l^[(B^[[m^[[37m^[[40m^[[1;52r^[[H^[[2J^[[1;1H^[[1m^[[37m^[[44m          >
^[[K
^[[?1049l^[[23;0;0t^[[0m
^[[J^[[90m[^[[0m^[[33m SUB1 ^[[90m]^[[0m DietPi-Set_hardware > serialconsole (disable)
^[[0m^[[0m
^[[J^[[90m[^[[0m INFO ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m ^[[90mDisabling serial-getty on: /dev/ttyS0
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS0^[[0m>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS0
^[[0mCreated symlink /etc/systemd/system/serial-getty@ttyS0.service → /dev/null.
^[[0m
^[[J^[[90m[^[[0m INFO ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m ^[[90mDisabling serial-getty on: /dev/ttyS1
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS1^[[0m>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS1
^[[0mCreated symlink /etc/systemd/system/serial-getty@ttyS1.service → /dev/null.
^[[0m
^[[J^[[90m[^[[0m INFO ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m ^[[90mDisabling serial-getty on: /dev/ttyS2
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS2^[[0m>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS2
^[[0mCreated symlink /etc/systemd/system/serial-getty@ttyS2.service → /dev/null.
^[[0m
^[[J^[[90m[^[[0m INFO ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m ^[[90mDisabling serial-getty on: /dev/ttyS3
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS3^[[0m>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m systemctl disable --now serial-getty@ttyS3
^[[0mCreated symlink /etc/systemd/system/serial-getty@ttyS3.service → /dev/null.
^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_hardware |^[[0m Setting in ^[[33m/boot/dietpi.txt^[[0m ad>
^[[0m^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m serialconsole disable | Completed
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Software |^[[0m mount -o remount /var/log^[[0m^[[2G^[[1;33m.     ^[>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Software |^[[0m mount -o remount /var/log
^[[0m^[[0m
^[[J^[[90m[^[[0m^[[33m SUB1 ^[[90m]^[[0m DietPi-Set_software > ntpd-mode (2)
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl unmask systemd-timesyncd^[[0m^[[2G^[[>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl unmask systemd-timesyncd
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl enable systemd-timesyncd^[[0m^[[2G^[[>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl enable systemd-timesyncd
^[[0m^[[0m
^[[J^[[90m[^[[0m      ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl stop systemd-timesyncd^[[0m^[[2G^[[1;>
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m systemctl stop systemd-timesyncd
^[[0m^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Set_software |^[[0m Setting in ^[[33m/boot/dietpi.txt^[[0m ad>
^[[0m^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ntpd-mode 2 | Completed
^[[0m^[[0m
^[[J^[[90m[^[[0m^[[32m  OK  ^[[90m]^[[0m ^[[90mDietPi-Software |^[[0m Applied initial first run setup steps
^[[0m^[[0m
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

/dev/sda1 seems very small? But then I'm not super talented with linux and dietpi so I'm not sure how big this is supposed to be....
User avatar
Joulinar
Posts: 6525
Joined: Sat Nov 16, 2019 12:49 am

Re: Issue installing on HPT620 SSD

Post by Joulinar »

ah I see. Issue is with BootFS partition. It seems to be to small to extract new kernel. Can you share

Code: Select all

ls -la /boot
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
TommySharpNZ
Posts: 18
Joined: Thu Mar 04, 2021 10:26 pm

Re: Issue installing on HPT620 SSD

Post by TommySharpNZ »

Code: Select all

total 70892
drwxr-xr-x  4 root root     1536 Jan  1  1970 .
drwxr-xr-x 18 root root     4096 Nov 18 10:57 ..
-rwxr-xr-x  1 root root       83 Sep 23 21:35 System.map-5.10.0-8-amd64
-rwxr-xr-x  1 root root       83 Sep 30 20:36 System.map-5.10.0-9-amd64
-rwxr-xr-x  1 root root   236220 Sep 23 21:35 config-5.10.0-8-amd64
-rwxr-xr-x  1 root root   236055 Sep 30 20:36 config-5.10.0-9-amd64
drwxr-xr-x  4 root root     3072 Nov 18 11:13 dietpi
-rwxr-xr-x  1 root root    18092 Aug 14 16:24 dietpi-LICENSE.txt
-rwxr-xr-x  1 root root    14229 Aug 14 16:24 dietpi-README.md
-rwxr-xr-x  1 root root     2955 Aug 15 20:44 dietpi-wifi.txt
-rwxr-xr-x  1 root root    14987 Nov 18 11:13 dietpi.txt
drwxr-xr-x  5 root root      512 Nov 18 11:13 grub
-rwxr-xr-x  1 root root 29199153 Nov 18 11:12 initrd.img-5.10.0-8-amd64
-rwxr-xr-x  1 root root 29204846 Nov 18 11:13 initrd.img-5.10.0-9-amd64
-rwxr-xr-x  1 root root  6820832 Sep 23 21:35 vmlinuz-5.10.0-8-amd64
-rwxr-xr-x  1 root root  6833568 Sep 30 20:36 vmlinuz-5.10.0-9-amd64
User avatar
Joulinar
Posts: 6525
Joined: Sat Nov 16, 2019 12:49 am

Re: Issue installing on HPT620 SSD

Post by Joulinar »

@MichaIng
could you have a look. Should we increase the BootFS? It seems to be to small to hold current kernel and to extract new one. Or is it possible to clean some of the old files? At least it seems to fail to extract initrd.img-5.10.0-9-amd64. Not sure if we could remove 5.10.0-8 already
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
Post Reply