Tor-Router

Suggestions for features and software you would like to see in DietPi, goes here.
Post Reply
luzifia
Posts: 48
Joined: Tue Jun 28, 2016 9:48 am

Tor-Router

Post by luzifia »

Hi.
I hope anybody can help me wirh this configuration.
Router.png
Router.png (6.92 KiB) Viewed 3703 times
I've installed TOR from dietpi and now I want to configure a additional 2nd LAN eth1 Adapter (USB 3.0).
So AP wlan0 -> eth0 works
eth1 -> eth0 Need help

eth1 dhcp Server (same iprange as wlan0)

And the best Feature if possible will be:

WebFrontEnd or Integration in OMV, WEBMIN, ...
Possible authentification MAC Address of Client to use TOR or direct link to ISP Router

So i can build my home TOR Router with also NAS/Plex for internal use and a Kodi Client with TOR (Geoblock avoidance)

luzi.
User avatar
k-plan
Posts: 416
Joined: Sun Feb 28, 2016 5:28 pm

Re: Tor-Router

Post by k-plan »

Hi luzifia,

Phew, are you familiar with complex iptables rules and routing?

If you get a ton of it, this maybe will work.
But I will prefer to do this not on a SBC, which will handle your local services.
Better use a "real Router" for something you like to do.
But even with such a device, it will be difficult and complex.

Here you can have a look what TOR Hotspot on DietPi does:

https://github.com/Fourdee/DietPi/blob/ ... ware#L8085

cu
k-plan
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.
luzifia
Posts: 48
Joined: Tue Jun 28, 2016 9:48 am

Re: Tor-Router

Post by luzifia »

Hi

I've done it with a real router, but this won't work like the Tor Hotspot from Dietpi.
I've taken my old Fritzbox and compiled a Tor Firmware following this guide (it's in german)
http://www.chip.de/artikel/Tor-Proxy-Fr ... 06856.html

this work, ok but this only installes a tor Proxy. Maybee u can post a link with router and where to find a tor-router Software ?

thanks for answer.

luzi
luzifia
Posts: 48
Joined: Tue Jun 28, 2016 9:48 am

Re: Tor-Router

Post by luzifia »

i am again.
i've tried so much this won't run.

so the easiest confi should be:

fritzbox(Internet) <- LAN (eth0/dhcp) -> PI (TOR) <-> wlan0,eth1(dhcp Server)

same like dietpi-tor hotspot with a eth1 also.
i've tried with Bridge but i that's outside of my abilities.

so i need a recipe for dummies. please help.

luzi
Post Reply