I have Orange PI PC.
I installed dietpi. all is well established and works well. I love it.
I have installed the server version for the web server (no desktop).
connected to the board on the (ssh) - all works very well.
Now I need to open a terminal when I connect the wires to the pins 3, for (Uart0) that 3 pieces are separate.
I open the (putty) and I see there's a lot of letters, and then it stops and does not load more ...
many times pressed the button enter - else fails to operate as a terminal.
tell me how to work with the board through uart0 / Help please ...
that's what I wrote when Linux is loaded
Code: Select all
U-Boot SPL 2016.09-armbian (Oct 23 2016 - 17:08:22) DRAM: 1024 MiB Trying to boot from MMC1 U-Boot 2016.09-armbian (Oct 23 2016 - 17:08:22 +0200) Allwinner Technology CPU: Allwinner H3 (SUN8I 1680) Model: Xunlong Orange Pi PC I2C: ready DRAM: 1 GiB MMC: SUNXI SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Net: phy interface0 eth0: ethernet@1c30000 Hit any key to stop autoboot: 0 switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot.scr reading /boot.scr 2444 bytes read in 29 ms (82 KiB/s) ## Executing script at 43100000 gpio: pin PL10 (gpio 298) value is 1 gpio: pin PG11 (gpio 203) value is 1 Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading .next ** Unable to read file .next ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading script.bin 35916 bytes read in 37 ms (947.3 KiB/s) Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading uInitrd 2451536 bytes read in 243 ms (9.6 MiB/s) Failed to mount ext2 filesystem... ** Unrecognized filesystem type ** reading zImage 5024944 bytes read in 461 ms (10.4 MiB/s) ## Loading init Ramdisk from Legacy Image at 42000000 ... Image Name: uInitrd Image Type: ARM Linux RAMDisk Image (gzip compressed) Data Size: 2451472 Bytes = 2.3 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK Using machid 0x1029 from environment Starting kernel ... [sun8i_fixup]: From boot, get meminfo: Start: 0x40000000 Size: 1024MB ion_carveout reserve: 160m@0 256m@0 130m@1 200m@1 ion_reserve_select: ion chipid [0x2004620! ion_reserve_common: ion reserve: [0x50000000, 0x60000000]!
Sorry for my English