Odroid HC-2

Have some feedback, questions, suggestions, or just fancy a chat? Pop it in here.
secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Odroid HC-2

Post by secpri » Fri Jan 19, 2018 10:57 am

:D Hardkernel released the Odroid HC-2 (same as HC-1 but for 3 1/2" hdd drives)
hc2-news.JPG
As fast as i have mine in hand, i'll update this thread with further news.

Now i can build up my home cloud with 6-10 TB space :mrgreen:

Upadate:
- at Pollin it will be available at begin of february, as i got informed.

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Wed Feb 21, 2018 5:10 pm

:mrgreen: My HC-2 is just arrived :-) more news i can give you later.

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Fri Mar 09, 2018 2:57 pm

As far as i got it tested, the actually odroid image for xu4/hc1 works also on HC-2 out of the box.

great work

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Sat Mar 10, 2018 10:15 am

Starting Testing

Hardware Setup:
- Odroid HC-2 including cover
- CR2032 Backup Battery
- WD RED 6TB (WD6002FFWX) HDD
- SanDisk Ultra 16 GB micro sd-card

Software Setup:
- Official Dietpi Image Odroid XU3/XU4/HC1 (DietPi_OdroidXU4-ARMv7-Jessie.7z)
- Samba

Test:
- Sysbench (similar results as HC-1)
- hdparm -t /dev/sda = around 126 Mb / Sec.

bronco
Posts: 10
Joined: Sun Mar 11, 2018 8:33 am

Re: Odroid HC-2

Post by bronco » Tue Mar 13, 2018 6:17 am

secpri wrote:Starting Testing
What throughput numbers do you get when moving large files between Windows and HC2 with Samba? Can you provide Windows Explorer screenshots for uploading and downloading? Interested especially in a performance drop after some few hundred MB have been written or read since I've seen this on few other boards already.

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Tue Mar 13, 2018 2:58 pm

I'll will test it, today evening, then upload some screenshots.

User avatar
MichaIng
Legend
Posts: 308
Joined: Sat Nov 18, 2017 5:21 pm

Re: Odroid HC-2

Post by MichaIng » Wed Mar 14, 2018 2:03 pm

Jep, XU3/XU4/HC1 image works well, as HC2 is based on XU4 device as well. We already updated the download page to reflect this: http://dietpi.com/#download
:D

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Wed Apr 04, 2018 4:33 pm

First Test:
HC2.JPG
Actually Setup
Result W7 -> Samba -> HC2:
HC2-WDR6TB-SAMBA_W_LAN.JPG
Write to HC2 over Samba
Result HC2 -> Samba -> W7:
HC2-WDR6TB-SAMBA-R-LAN.JPG
Read from HC2 over Samba
Iperf3 Tests:
Read: 880 Mbit / sec
Write: 660 Mbit / sec

Note:
Temperature about 53-67 °C as cpu mentioned it.
Here i wil build first up a better case including fans, as the WD RED 6TB brings too much heat to the standard case.

secpri
Posts: 21
Joined: Sun Nov 19, 2017 5:54 pm

Re: Odroid HC-2

Post by secpri » Wed Apr 04, 2018 9:32 pm

Cooling Issue - Tests:

1x 40mm Fan on Headspreader = 53-57 °C (idle/30%load)
1x 92mm Fan on Headspreader = 42-47 °C (Idle/30% load)

Next Step: New Case, with 2x92mm Fan or 100mm perhaps

bronco
Posts: 10
Joined: Sun Mar 11, 2018 8:33 am

Re: Odroid HC-2

Post by bronco » Fri Apr 06, 2018 4:18 pm

Is your hardware defective? Just asking since with OMV the numbers are above 100 MB/s

See 'NETWORK STORAGE PERFORMANCE' here http://www.hardkernel.com/main/products ... 1505170472 or https://forum.openmediavault.org/index. ... 1-HC2-MC1/

Can you give it a quick check with OMV? First steps are outlined by Hardkernel here: https://wiki.odroid.com/odroid-xu4/soft ... _beginning

Post Reply