Finally i’ve settled up all my system, and I’ve designed a case for my OwnCloud Server based on Raspberry Pi.
I’ve used Design Spark from RS to design it.
Basically I’m using a RPi2 plus two Hard Disks.
One is brand new from Seagate:
https://www.amazon.it/dp/B081VGBGP5/ref ... UTF8&psc=1
The other one is one old off the shelf that I have here around for months, so I’ve just buyed an external case and used it as a Backup.
https://www.amazon.it/dp/B00MYN9V9W/ref ... 7Fb6BQ2JQS
The case is divided in three pieces, mainly for space and printing time reasons.
You have a case for cables, central and end case. All the pieces are designerd to self lock each other.
Attached you will find all the files, as soon as I will finish the print, I will share pictures of the result.
Feel free to modify and adapt the case to your own needs!
Hope this can help someone.
My printer is this one:
https://www.amazon.it/dp/B081JMSQ85/ref ... 7FbN8VBRAD
And this is the filament used for the printing, extruder temperature is 200 degrees Celsius, 50 degrees Celsius for the heatbed.
https://www.amazon.it/dp/B071DM81ZK/ref ... UTF8&psc=1
Here you can download all the files:
https://www.dropbox.com/s/x85nq8svhvod5 ... i.zip?dl=0
Happy New Year!
Guides and tutorials for various stuff. Posted by DietPi users.
3 posts • Page 1 of 1