My router is set up correctly but I am not sure what happened this time around (I had to fresh install due to a HHD failure which caused a failed boot)..
I checked all ports with an online tester.
1194 (the default) shows that I can not connect as the port is closed.
I checked in server.conf and changed a couple of settings:
I am not sure what else to do at this point.dev tun
server ************ 255.255.255.0 <<< ************ This is the IP of my internal RPi
# Set your primary domain name server address for clients
push "dhcp-option DOMAIN *****.ddns.net"
push "dhcp-option DNS 22.214.171.124"
push "dhcp-option DNS 126.96.36.199"
# Prevent DNS leaks on Windows
# Override the Client default gateway by using 0.0.0.0/1 and
# 188.8.131.52/1 rather than 0.0.0.0/0. This has the benefit of
# overriding but not wiping out the original default gateway.
push "redirect-gateway def1"
keepalive 15 120
status /var/log/openvpn-status.log 20
#DuplicateCNs allow access control on a less-granular, per user basis.
#Remove # if you will manage access by user instead of device.
# Generated for use by PiVPN.io
I had everything working great before the crash, and now I just can't seem to get it to work at all.
I've tried reinstalling multiple times, and still no dice.
I am not sure what else to do at this point.
I have all the other installs I wish for installed and working correctly, I am trying to avoid yet another fresh install.
Any light on this would be great.
Thanks in advance!