DietPi - Allo.com Web GUI Image

Everything you need to download and start your DietPi experience.

DietPi - Allo.com Web GUI Image

Postby Fourdee » Sat Sep 30, 2017 3:07 pm

DietPi - Allo.com Web GUI Image

alloguiv2.png




Download / Getting Started:



Image Features:
  • Slick Web Interface to configure and control the system.
  • Preinstalled with Audiophile software, such as Roon, O!MPD, NAA Daemon and Shairport-sync (AirPlay), Squeezelite and Gmrender (DLNA audio endpoint).
  • Ready to Run. Pre-configured and pre-installed image (No SSH/Terminal setup required)
  • Audiophile quality, all the optimizations and features of DietPi, 156MB RAM usage (RPi, all services enabled), RAMlog and more. Perfect for audio usage.

Web Interface Features:
  • System Settings:
    • Change hostname
    • Networking configuration (DHCP/STATIC IP)
    • Soundcard configuration
    • Update DietPi (updates for system and web interface)
    • CPU governor selection
    • Swapfile size configuration
    • Power control
  • MPD Settings:
    • Service control (enable/disable)
    • Access O!MPD interface
    • SOXR sampling output options (enable/disable & set quality)
    • Output frequency/bit depth options
  • Roon Bridge Settings:
    • Service control (enable/disable)
  • NAA Daemon (HQ player endpoint) Settings:
    • Service control (enable/disable)
  • ShairPort-Sync (AirPlay) Settings:
    • Service control (enable/disable)
    • Output frequency/bit depth options
  • WiFi HotSpot (Sparky SBC only, Allo.com WiFi dongle required) Options:
    • Service control (enable/disable)
    • Configure SSID and passkey
  • Status Page:
    • ALSA output stream information (lists actual frequency and bit depth during playback)
    • Access NetData web interface
    • Storage usage
    • RAM usage
    • CPU usage
    • CPU temperature

Installed Software:
  • Roon Bridge
    roon3.png
  • MPD + O!MPD (Feature rich web interface audio player)
    ompd.png
  • ShairPort-Sync (AirPlay)
    shairport-sync.png
  • NAA Daemon (HQ Player endpoint)
    naadaemon.png
  • WiFi Hotspot (Sparky SBC only)
    wifihotspot.png
  • Open SSH Server
    • Username = root
    • Password = dietpi
  • Samba Server (easily transfer files/music to device over the network)
    samba.jpg
    samba.jpg (9.93 KiB) Viewed 3098 times
  • NetData (Feature rich system stats)
    netdata.png
  • Squeezelite | Available in DietPi update v157
  • Gmrender (DLNA audio render) | Available in DietPi update v157
    grender-128x128.png
    grender-128x128.png (24.45 KiB) Viewed 2658 times
Attachments
allo_web_system_settings.jpg
allo_web_mpd.jpg
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.
User avatar
Fourdee
Site Admin
 
Posts: 2542
Joined: Tue Feb 06, 2007 12:36 pm

Re: DietPi - Allo.com Web Interface Image

Postby Fourdee » Sat Sep 30, 2017 3:08 pm

Download / Getting Started:

Download Image:

Write Image:
  • Extract the contents of the 7z file to obtain the .img file.
  • Use a program such as Etcher, to write the image (DietPi_v....img) to SD/EMMC.
  • Ensure ethernet is connected to the device.
  • Plug in a HDMI monitor, if you need to obtain the IP address of system to access web interface.
  • Power on system.

Access Web Interface:
Web interface can be accessed via hostname (Bonjour/avahi compatible network), or the IP address (which can be obtained from HDMI output after boot):

Login Details:
  • Username = admin@allo.com
  • Password = allo



FAQ:

Audio works in Roon, however, no output in other software?
This is due to a limitation with some DAC's, only supporting 32 bit depth output. Please use the web interface to change output bit depth in the required application to 32.

I want to use WiFi connection, how do I disable HotSpot and setup connection?
NB: We highly recommend ethernet connection for a stable audio streaming experience.
To achieve a WiFi connection, you will need to access the terminal (either via SSH or locally using keyboard + monitor):
  • Login with username = root , password = dietpi
  • Sparky Only: Uninstall HotSpot using the command dietpi-software uninstall 60
  • Run dietpi-config
  • Select Network Options: Adapters > WiFi
  • If a prompt appears, requesting WiFi to be enabled, please select Ok
  • Select WiFi option again
  • Select Scan, choose your SSID and follow the onscreen prompts to enter credentials

Transfer music to the device (MPD+O!MPD):

Samba Server Details:
Samba Server is installed by default, allowing your to transfer files/music over the network for the device.
  • On a Windows system:
    • Press WIN key + R
    • Paste in the following \\192.168.0.100\dietpi, before pressing OK, change the IP address to match your system.
  • Username = root
  • Password = dietpi
  • Transfer your Music into the Music directory

Update O!MPD libary:
Once the transfer is completed, we need to update the O!MPD library database.
  • Access the Allo web interface
    • Load up the MPD settings page
    • Select the O!MPD link to launch the O!MPD web interface
  • Login if required with the following details:
    • Username = admin
    • Password = admin
  • Select the settings button (top right of screen)
    ompd_settings.png
    ompd_settings.png (969 Bytes) Viewed 3095 times
  • Scroll down the page and select Update
  • Click the following button to update the library
    ompd_update.png
    ompd_update.png (3.3 KiB) Viewed 3095 times
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.
User avatar
Fourdee
Site Admin
 
Posts: 2542
Joined: Tue Feb 06, 2007 12:36 pm

Re: DietPi - Allo.com Web Interface Image

Postby Fourdee » Sat Sep 30, 2017 3:34 pm

Known Issues:
  • None currently
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.
User avatar
Fourdee
Site Admin
 
Posts: 2542
Joined: Tue Feb 06, 2007 12:36 pm

Updates

Postby Fourdee » Thu Oct 19, 2017 7:09 pm

Updates:




To view all DietPi changes in the changelog, please see link below:
https://github.com/Fourdee/DietPi/blob/master/CHANGELOG.txt



How do I update?:
  • In the web interface, select "System Settings" and select "Update DietPi"
  • NB: DietPi checks for updates daily, and during boot. If the update is not available, please reboot the system.
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.
User avatar
Fourdee
Site Admin
 
Posts: 2542
Joined: Tue Feb 06, 2007 12:36 pm


Return to Releases

Who is online

Users browsing this forum: No registered users and 8 guests