The first three posts “Using a RAID system with DietPi – part 1”, “- part 2” and “- part 3” dealt with the setup of, the access to and the management/diagnosis of a RAID system with an example of a RAID 5. This blog post deals with the maintenance tasks, e.g. changing RAID disks, changing […]
Using a RAID system with DietPi – part 3
The first two posts “Using a RAID system with DietPi – part 1” and “- part 2” dealt with the setup of and the access to a RAID system with an example of a RAID 5. This blog post deals with the basic management and diagnosis tasks, e.g. renaming the RAID and checking options.These tasks […]
Using a RAID system with DietPi – part 2
The first post “Using a RAID system with DietPi – part 1” dealt with the setup of a RAID system with an example of a RAID 5. This blog post deals with the usage, i.e. managing the access to the RAID from outside via NFS, Samba and FTP. Table of contents 1. Introduction The access […]
Using a RAID system with DietPi – part 1
RAID storage systems can act as a backup system with a low failure rate. Setting up such a system is no rocket science and is described in a step by step manner below. The objective is to achieve an economical NAS storage for access via NFS (network file system), Samba or others. It shall be […]
Use DietPi-Backup in your multi-device environment
This blog post deals with the DietPi tool DietPi-Backup, it describes the procedure of the backup/restore, especially if you have several DietPi systems which you want to backup on a central backup server. It shall be shown, The basic backup/restore functionality was described in the recommendable video “Raspberry Pi Backup Einrichtung – ganz easy mit […]