Search found 2293 matches

by MichaIng
Wed Sep 23, 2020 4:48 pm
Forum: Troubleshooting
Topic: NanoPi M4V2 randomly drops ethernet
Replies: 4
Views: 50

Re: NanoPi M4V2 randomly drops ethernet

BCM4356 is btw the WiFi adapter, so this is not related :?.
by MichaIng
Wed Sep 23, 2020 4:46 pm
Forum: Troubleshooting
Topic: Nextcloud OPcache
Replies: 28
Views: 205

Re: Nextcloud OPcache

Strange, is the mod actually enabled?

Code: Select all

ls -Al /etc/php/7.3/fpm/conf.d/99-dietpi-nextcloud.ini
phpenmod dietpi-nextcloud
ls -Al /etc/php/7.3/fpm/conf.d/99-dietpi-nextcloud.ini
by MichaIng
Tue Sep 22, 2020 8:16 pm
Forum: General Discussion
Topic: Change audio device PID and VID name?
Replies: 3
Views: 39

Re: Change audio device PID and VID name?

Okay, at least I have no idea if that is possible and in case how to achieve. That seems to go into Linux depth, probably not even possible in userland, but the good thing is if you (or someone else) finds or knows a method on any Linux distro, that should work on DietPi as well.
by MichaIng
Tue Sep 22, 2020 6:53 pm
Forum: Troubleshooting
Topic: Nextcloud OPcache
Replies: 28
Views: 205

Re: Nextcloud OPcache

No, PHP7.4 is used by nothing (Lighttpd uses PHP7.3) and everything can easily use PHP7.3 instead, so you cannot break something but instead I bet your RAM usage will be significantly lower as currently there are two PHP-FPM servers running ;). But just to be sure, when you do apt purge 'php7.4-*' h...
by MichaIng
Tue Sep 22, 2020 4:34 pm
Forum: Troubleshooting
Topic: NanoPi M4V2 randomly drops ethernet
Replies: 4
Views: 50

Re: NanoPi M4V2 randomly drops ethernet

Which kernel do you run at? uname -a

The offload workaround was required on older kernel versions but should not on current ones 5.6 and up AFAIK.
by MichaIng
Tue Sep 22, 2020 4:31 pm
Forum: Requests
Topic: Newby question about installing LXQT desktop
Replies: 2
Views: 54

Re: Newby question about installing LXQT desktop

Firefox is pre-installed with all desktops but Chromium can be installed as well and "firefox-esr" purged instead.

But don't expect too much with RPi Zero, browser load times are not great, but Chromium at least has full GPU acceleration on RPi.
by MichaIng
Tue Sep 22, 2020 4:21 pm
Forum: Troubleshooting
Topic: Nextcloud OPcache
Replies: 28
Views: 205

Re: Nextcloud OPcache

Okay PHP7.3 is used but PHP7.4 is installed as well. I can imagine that Nextcloud might do some checks via PHP CLI and that the php command currently links to 7.4 so the results are wrong.

You should purge all php7.4-* packages and see ig that helps.
by MichaIng
Tue Sep 22, 2020 3:31 pm
Forum: General Discussion
Topic: UART comminication between RPI and arduino
Replies: 2
Views: 128

Re: UART comminication between RPI and arduino

Please check out the official RPi documentation which applies to DietPi as well since we use the same firmware, kernel and repository. E.g.: https://www.raspberrypi.org/documentation/configuration/uart.md First of all it depends if you use the hardware UART on ttyAMA0 or the software UART on ttyS0, ...
by MichaIng
Tue Sep 22, 2020 3:13 pm
Forum: General Discussion
Topic: Change audio device PID and VID name?
Replies: 3
Views: 39

Re: Change audio device PID and VID name?

Not sure where Roon reads identifiers from (or which ones PID and VID refer to) but there are those which are given by the hardware itself and there are the ALSA interface names in /etc/asound.conf. We simply override the "default" interfaces there but you can add own entries linked in a certain way...
by MichaIng
Tue Sep 22, 2020 3:06 pm
Forum: Troubleshooting
Topic: Nextcloud OPcache
Replies: 28
Views: 205

Re: Nextcloud OPcache

Ah okay Stretch. The 7.4 dir structure comes from APCu module then, but the php.ini files should not exist.

Lets see what the webserver uses: grep -r sock /etc/lighttpd/
And then what is installed: dpkg -l | grep php