Creating a bug report/issue
I have searched the existing open and closed issues
Required Information
- DietPi version |
G_DIETPI_VERSION_CORE=9
G_DIETPI_VERSION_SUB=3
G_DIETPI_VERSION_RC=0
G_GITBRANCH=‘master’
G_GITOWNER=‘MichaIng’ - Distro version | bookworm
- Kernel version | Linux DietPi 6.1.0-20-amd64 #1 SMP PREEMPT_DYNAMIC Debian 6.1.85-1 (2024-04-11) x86_64 GNU/Linux
- Architecture | amd64
- SBC model | Native PC (x86_64)
- Power supply used | Laptop Stock
- SD card used | TOSHIBA HDD
Additional Information (if applicable)
Can’t access softwares and nothing working properly even wifi. Tried other forum solutions, nothing works for me.
RootFS is currently set to “Read Only (R/O)”. DietPi-Drive_Manager requires
“Read Write (R/W)” access to function.
Would you like to re-enable R/W access on RootFS?
When clicked ok it shows:
- Command: mount -v -o remount,rw /
- Exit code: 32
- DietPi version: v9.3.0 (MichaIng/master) | HW_MODEL: 21 | HW_ARCH: 10 |
DISTRO: 7 - Error log:
mount: /: cannot remount /dev/sda1 read-write, is write-protected.
dmesg(1) may have more information after failed mount system call.
From dmesg:
…
[ 1.143288] r8169 0000:02:00.0: can't disable ASPM; OS doesn't have ASPM control
[ 1.145533] ehci-pci 0000:00:1d.0: EHCI Host Controller
[ 1.145612] ehci-pci 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 1.145710] ehci-pci 0000:00:1d.0: debug port 2
[ 1.149817] ehci-pci 0000:00:1d.0: irq 23, io mem 0xf7223000
[ 1.156102] SCSI subsystem initialized
[ 1.160673] r8169 0000:02:00.0 eth0: RTL8168gu/8111gu, f8:32:e4:00:36:9c, XID 509, IRQ 45
[ 1.160772] r8169 0000:02:00.0 eth0: jumbo features [frames: 9194 bytes, tx checksumming: ko]
[ 1.165198] ehci-pci 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.165348] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.165439] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.165526] usb usb1: Product: EHCI Host Controller
[ 1.165592] usb usb1: Manufacturer: Linux 6.1.0-20-amd64 ehci_hcd
[ 1.165661] usb usb1: SerialNumber: 0000:00:1d.0
[ 1.165945] hub 1-0:1.0: USB hub found
[ 1.166018] hub 1-0:1.0: 2 ports detected
[ 1.166358] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.166449] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 2
[ 1.167670] xhci_hcd 0000:00:14.0: hcc params 0x200077c1 hci version 0x100 quirks 0x000000000004b810
[ 1.167949] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.168022] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.168108] xhci_hcd 0000:00:14.0: Host supports USB 3.0 SuperSpeed
[ 1.168280] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[ 1.170116] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.170203] usb usb2: Product: xHCI Host Controller
[ 1.170267] usb usb2: Manufacturer: Linux 6.1.0-20-amd64 xhci-hcd
[ 1.170333] usb usb2: SerialNumber: 0000:00:14.0
[ 1.170595] hub 2-0:1.0: USB hub found
[ 1.170675] hub 2-0:1.0: 11 ports detected
[ 1.177693] usb usb3: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[ 1.177785] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.177869] usb usb3: Product: xHCI Host Controller
[ 1.177933] usb usb3: Manufacturer: Linux 6.1.0-20-amd64 xhci-hcd
[ 1.177999] usb usb3: SerialNumber: 0000:00:14.0
[ 1.178228] hub 3-0:1.0: USB hub found
[ 1.178305] hub 3-0:1.0: 4 ports detected
[ 1.188676] libata version 3.00 loaded.
[ 1.195013] ahci 0000:00:1f.2: version 3.0
[ 1.205288] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 2 ports 6 Gbps 0x3 impl SATA mode
[ 1.205381] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo only pio slum part deso sadm sds apst
[ 1.206175] scsi host0: ahci
[ 1.206503] scsi host1: ahci
[ 1.206671] ata1: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222100 irq 47
[ 1.206760] ata2: SATA max UDMA/133 abar m2048@0xf7222000 port 0xf7222180 irq 47
[ 1.253229] tsc: Refined TSC clocksource calibration: 1995.380 MHz
[ 1.253306] clocksource: tsc: mask: 0xffffffffffffffff max_cycles: 0x39864456686, max_idle_ns: 881590680204 ns
[ 1.253431] clocksource: Switched to clocksource tsc
[ 1.421265] usb 1-1: new high-speed USB device number 2 using ehci-pci
[ 1.433266] usb 2-5: new high-speed USB device number 2 using xhci_hcd
[ 1.520938] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 1.521084] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.524719] ata2.00: ATAPI: MATSHITA DVD-RAM UJ8HC, 1.00, max UDMA/100
[ 1.531810] ata2.00: configured for UDMA/100
[ 1.574664] ata1.00: ATA-8: TOSHIBA MQ01ABD100, AX0R2J, max UDMA/100
[ 1.575228] ata1.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 32), AA
[ 1.577651] ata1.00: configured for UDMA/100
[ 1.577954] usb 1-1: New USB device found, idVendor=8087, idProduct=8001, bcdDevice= 0.03
[ 1.578090] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.578499] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MQ01ABD1 2J PQ: 0 ANSI: 5
[ 1.578946] hub 1-1:1.0: USB hub found
[ 1.579205] hub 1-1:1.0: 8 ports detected
[ 1.582113] scsi 1:0:0:0: CD-ROM MATSHITA DVD-RAM UJ8HC 1.00 PQ: 0 ANSI: 5
[ 1.618189] usb 2-5: config 1 interface 1 altsetting 4 endpoint 0x81 has invalid wMaxPacketSize 0
[ 1.624874] usb 2-5: New USB device found, idVendor=04f2, idProduct=b483, bcdDevice=99.14
[ 1.624986] usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=0
[ 1.625068] usb 2-5: Product: USB2.0 VGA UVC WebCam
[ 1.655629] sd 0:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/932 GiB)
[ 1.655725] sd 0:0:0:0: [sda] 4096-byte physical blocks
[ 1.655813] sd 0:0:0:0: [sda] Write Protect is off
[ 1.655881] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.655922] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.656037] sd 0:0:0:0: [sda] Preferred minimum I/O size 4096 bytes
[ 1.701202] sr 1:0:0:0: [sr0] scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.701295] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.738263] sda: sda1
[ 1.738529] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.751300] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 2.265217] usb 2-6: new full-speed USB device number 3 using xhci_hcd
[ 2.414233] usb 2-6: New USB device found, idVendor=04ca, idProduct=3010, bcdDevice= 0.01
[ 2.414326] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 2.506128] EXT4-fs (sda1): mounted filesystem with ordered data mode. Quota mode: none.
[ 2.712874] Not activating Mandatory Access Control as /sbin/tomoyo-init does not exist.
[ 4.057561] systemd[1]: Inserted module 'autofs4'
[ 4.349945] systemd[1]: systemd 252.22-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[ 4.350243] systemd[1]: Detected architecture x86-64.
[ 4.404371] systemd[1]: Hostname set to <DietPi>.
[ 5.665892] input: PS/2 Logitech Wheel Mouse as /devices/platform/i8042/serio1/input/input2
[ 6.094637] systemd[1]: Queued start job for default target graphical.target.
[ 6.119794] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[ 6.121264] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[ 6.121916] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[ 6.122471] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[ 6.123290] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[ 6.123743] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[ 6.124160] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[ 6.124613] systemd[1]: Reached target paths.target - Path Units.
[ 6.124971] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[ 6.125389] systemd[1]: Reached target slices.target - Slice Units.
[ 6.125750] systemd[1]: Reached target swap.target - Swaps.
[ 6.126132] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[ 6.126848] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[ 6.127431] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[ 6.128729] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[ 6.129413] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[ 6.130052] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[ 6.135274] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[ 6.135949] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[ 6.136297] systemd[1]: Reached target sockets.target - Socket Units.
[ 6.138595] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System...
[ 6.140705] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[ 6.142253] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[ 6.143629] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[ 6.145832] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[ 6.147970] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[ 6.149741] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[ 6.151350] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[ 6.155566] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[ 6.157261] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[ 6.159594] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[ 6.161894] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[ 6.162263] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[ 6.164551] systemd[1]: Starting systemd-journald.service - Journal Service...
[ 6.167150] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[ 6.169123] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[ 6.171092] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[ 6.207914] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[ 6.209488] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[ 6.379784] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System.
[ 6.380191] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[ 6.380563] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[ 6.380921] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[ 6.416075] systemd[1]: Started systemd-journald.service - Journal Service.
[ 6.512891] EXT4-fs (sda1): re-mounted. Quota mode: none.
[ 6.522593] loop: module loaded
[ 6.818882] fuse: init (API version 7.37)
[ 6.821758] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log.
[ 6.821901] device-mapper: uevent: version 1.0.3
[ 6.822061] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[ 7.412273] systemd-journald[235]: Received client request to flush runtime journal.
[ 7.545277] ACPI: AC: AC Adapter [AC0] (on-line)
[ 7.566503] input: Asus Wireless Radio Control as /devices/LNXSYSTM:00/LNXSYBUS:00/ATK4002:00/input/input3
[ 7.613928] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input4
[ 7.613986] ACPI: button: Lid Switch [LID]
[ 7.614066] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input5
[ 7.629502] ACPI: button: Sleep Button [SLPB]
[ 7.629612] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input6
[ 7.629716] ACPI: button: Power Button [PWRF]
[ 8.068815] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 8.068877] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 8.092674] input: PC Speaker as /devices/platform/pcspkr/input/input7
[ 8.232013] ACPI: bus type drm_connector registered
[ 8.232976] iTCO_vendor_support: vendor-support=0
[ 8.233249] RAPL PMU: API unit is 2^-32 Joules, 4 fixed counters, 655360 ms ovfl timer
[ 8.233255] RAPL PMU: hw unit of domain pp0-core 2^-14 Joules
[ 8.233258] RAPL PMU: hw unit of domain package 2^-14 Joules
[ 8.233259] RAPL PMU: hw unit of domain dram 2^-14 Joules
[ 8.233260] RAPL PMU: hw unit of domain pp1-gpu 2^-14 Joules
[ 8.246205] Consider using thermal netlink events interface
[ 8.257475] iTCO_wdt iTCO_wdt.1.auto: Found a Wildcat Point_LP TCO device (Version=2, TCOBASE=0x1860)
[ 8.257681] iTCO_wdt iTCO_wdt.1.auto: initialized. heartbeat=30 sec (nowayout=0)
[ 8.312656] asus_wmi: ASUS WMI generic driver loaded
[ 8.911216] cryptd: max_cpu_qlen set to 1000
[ 8.931987] asus_wmi: Initialization: 0x1
[ 8.932045] asus_wmi: BIOS WMI version: 7.9
[ 8.932099] asus_wmi: SFUN value: 0xa0077
[ 8.932104] asus-nb-wmi asus-nb-wmi: Detected ATK, not ASUSWMI, use DSTS
[ 8.932109] asus-nb-wmi asus-nb-wmi: Detected ATK, enable event queue
[ 8.937609] input: Asus WMI hotkeys as /devices/platform/asus-nb-wmi/input/input8
[ 8.955873] asus_wmi: fan_curve_get_factory_default (0x00110024) failed: -19
[ 8.956321] asus_wmi: fan_curve_get_factory_default (0x00110025) failed: -19
[ 9.040742] intel_rapl_common: Found RAPL domain package
[ 9.040747] intel_rapl_common: Found RAPL domain core
[ 9.040749] intel_rapl_common: Found RAPL domain uncore
[ 9.040751] intel_rapl_common: Found RAPL domain dram
[ 9.040757] intel_rapl_common: RAPL package-0 domain package locked by BIOS
[ 9.040765] intel_rapl_common: RAPL package-0 domain dram locked by BIOS
[ 9.070201] mc: Linux media interface: v0.10
[ 9.164917] alg: No test for fips(ansi_cprng) (fips_ansi_cprng)
[ 9.247092] cfg80211: Loading compiled-in X.509 certificates for regulatory database
[ 9.247510] cfg80211: Loaded X.509 cert 'benh@debian.org: 577e021cb980e0e820821ba7b54b4961b8b4fadf'
[ 9.247780] cfg80211: Loaded X.509 cert 'romain.perier@gmail.com: 3abbc6ec146e09d1b6016ab9d6cf71dd233f0328'
[ 9.248028] cfg80211: Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7'
[ 9.248268] cfg80211: Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600'
[ 9.498650] videodev: Linux video capture interface: v2.00
[ 9.648525] platform regulatory.0: firmware: direct-loading firmware regulatory.db
[ 9.926434] platform regulatory.0: firmware: direct-loading firmware regulatory.db.p7s
[ 10.158502] AVX2 version of gcm_enc/dec engaged.
[ 10.158553] AES CTR mode by8 optimization enabled
[ 10.601055] usb 2-5: Found UVC 1.00 device USB2.0 VGA UVC WebCam (04f2:b483)
[ 10.671589] input: USB2.0 VGA UVC WebCam: USB2.0 V as /devices/pci0000:00/0000:00:14.0/usb2/2-5/2-5:1.0/input/input9
[ 10.671765] usbcore: registered new interface driver uvcvideo
[ 11.298079] Bluetooth: Core ver 2.22
[ 11.298113] NET: Registered PF_BLUETOOTH protocol family
[ 11.298116] Bluetooth: HCI device and connection manager initialized
[ 11.298120] Bluetooth: HCI socket layer initialized
[ 11.298123] Bluetooth: L2CAP socket layer initialized
[ 11.298128] Bluetooth: SCO socket layer initialized
[ 11.729953] i915 0000:00:02.0: vgaarb: deactivate vga console
[ 11.731300] Console: switching to colour dummy device 80x25
[ 11.732589] i915 0000:00:02.0: vgaarb: changed VGA decodes: olddecodes=io+mem,decodes=io+mem:owns=io+mem
[ 11.745300] snd_hda_codec_conexant hdaudioC1D0: CX20751/2: BIOS auto-probing.
[ 11.745819] snd_hda_codec_conexant hdaudioC1D0: autoconfig for CX20751/2: line_outs=1 (0x17/0x0/0x0/0x0/0x0) type:speaker
[ 11.745824] snd_hda_codec_conexant hdaudioC1D0: speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 11.745827] snd_hda_codec_conexant hdaudioC1D0: hp_outs=1 (0x16/0x0/0x0/0x0/0x0)
[ 11.745830] snd_hda_codec_conexant hdaudioC1D0: mono: mono_out=0x0
[ 11.745831] snd_hda_codec_conexant hdaudioC1D0: inputs:
[ 11.745833] snd_hda_codec_conexant hdaudioC1D0: Internal Mic=0x1a
[ 11.745835] snd_hda_codec_conexant hdaudioC1D0: Mic=0x19
[ 11.749212] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/sound/card1/input10
[ 11.749334] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card1/input11
[ 11.749438] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card1/input12
[ 11.808253] [drm] Initialized i915 1.6.0 20201103 for 0000:00:02.0 on minor 0
[ 11.810898] ACPI: video: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 11.813636] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input13
[ 11.813865] snd_hda_intel 0000:00:03.0: bound 0000:00:02.0 (ops i915_audio_component_bind_ops [i915])
[ 11.816985] fbcon: i915drmfb (fb0) is primary device
[ 12.932716] Console: switching to colour frame buffer device 170x48
[ 12.952164] i915 0000:00:02.0: [drm] fb0: i915drmfb frame buffer device
[ 13.103448] input: HDA Intel HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:03.0/sound/card0/input14
[ 13.103577] input: HDA Intel HDMI HDMI/DP,pcm=7 as /devices/pci0000:00/0000:00:03.0/sound/card0/input15
[ 13.103691] input: HDA Intel HDMI HDMI/DP,pcm=8 as /devices/pci0000:00/0000:00:03.0/sound/card0/input16
[ 13.133284] usbcore: registered new interface driver btusb
[ 13.265199] ath: phy0: WB335 1-ANT card detected
[ 13.265204] ath: phy0: Set BT/WLAN RX diversity capability
[ 13.274608] ath: phy0: Enable LNA combining
[ 13.275846] ath: phy0: ASPM enabled: 0x43
[ 13.275850] ath: EEPROM regdomain: 0x6c
[ 13.275851] ath: EEPROM indicates we should expect a direct regpair map
[ 13.275853] ath: Country alpha2 being used: 00
[ 13.275854] ath: Regpair used: 0x6c
[ 13.277083] ieee80211 phy0: Selected rate control algorithm 'minstrel_ht'
[ 13.277951] ieee80211 phy0: Atheros AR9565 Rev:1 mem=0x00000000911f372c, irq=19
[ 13.909319] usb 2-6: firmware: direct-loading firmware ar3k/ramps_0x31010000_40.dfu
[ 13.913437] intel_pstate: Turbo disabled by BIOS or unavailable on processor
[ 13.914106] usbcore: registered new interface driver ath3k
[ 13.914628] usb 2-6: USB disconnect, device number 3
[ 14.225308] usb 2-6: new full-speed USB device number 4 using xhci_hcd
[ 17.148526] wlan0: authenticate with 08:bf:b8:95:e9:d0
[ 17.148549] wlan0: 80 MHz not supported, disabling VHT
[ 17.161092] wlan0: send auth to 08:bf:b8:95:e9:d0 (try 1/3)
[ 17.173816] wlan0: authenticated
[ 17.177298] wlan0: associate with 08:bf:b8:95:e9:d0 (try 1/3)
[ 17.204527] wlan0: RX AssocResp from 08:bf:b8:95:e9:d0 (capab=0x1c11 status=0 aid=16)
[ 17.204726] wlan0: associated
[ 17.298825] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 08:bf:b8:95:e9:d0
[ 17.481430] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
[ 19.418783] usb 2-6: New USB device found, idVendor=04ca, idProduct=3010, bcdDevice= 0.02
[ 19.418797] usb 2-6: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 22.084934] wlan0: authenticate with 08:bf:b8:95:e9:d0
[ 22.084969] wlan0: 80 MHz not supported, disabling VHT
[ 22.097509] wlan0: send auth to 08:bf:b8:95:e9:d0 (try 1/3)
[ 22.112834] wlan0: authenticated
[ 22.117247] wlan0: associate with 08:bf:b8:95:e9:d0 (try 1/3)
[ 22.127143] wlan0: RX AssocResp from 08:bf:b8:95:e9:d0 (capab=0x1c11 status=0 aid=16)
[ 22.127342] wlan0: associated
[ 22.419314] wlan0: Limiting TX power to 30 (30 - 0) dBm as advertised by 08:bf:b8:95:e9:d0
[ 38.370417] ata1.00: exception Emask 0x0 SAct 0x70000e0 SErr 0x50000 action 0x0
[ 38.370488] ata1.00: irq_stat 0x40000001
[ 38.370517] ata1: SError: { PHYRdyChg CommWake }
[ 38.370553] ata1.00: failed command: READ FPDMA QUEUED
[ 38.370585] ata1.00: cmd 60/30:28:a0:30:fa/00:00:17:00:00/40 tag 5 ncq dma 24576 in
res 41/40:d0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 38.370673] ata1.00: status: { DRDY ERR }
[ 38.370701] ata1.00: error: { UNC }
[ 38.370727] ata1.00: failed command: WRITE FPDMA QUEUED
[ 38.370758] ata1.00: cmd 61/08:30:00:b8:3c/00:00:00:00:00/40 tag 6 ncq dma 4096 out
res 41/40:d0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 38.370844] ata1.00: status: { DRDY ERR }
[ 38.370871] ata1.00: error: { UNC }
[ 38.370896] ata1.00: failed command: READ FPDMA QUEUED
[ 38.370927] ata1.00: cmd 60/00:38:08:3a:85/01:00:4b:00:00/40 tag 7 ncq dma 131072 in
res 41/40:d0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 38.371013] ata1.00: status: { DRDY ERR }
[ 38.371040] ata1.00: error: { UNC }
[ 38.371068] ata1.00: failed command: READ FPDMA QUEUED
[ 38.371099] ata1.00: cmd 60/08:c0:70:ed:20/00:00:72:00:00/40 tag 24 ncq dma 4096 in
res 41/40:d0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 38.371184] ata1.00: status: { DRDY ERR }
[ 38.371210] ata1.00: error: { UNC }
[ 38.371236] ata1.00: failed command: READ FPDMA QUEUED
[ 38.371267] ata1.00: cmd 60/00:c8:80:b0:3c/01:00:09:00:00/40 tag 25 ncq dma 131072 in
res 41/40:00:c0:b0:3c/00:01:09:00:00/40 Emask 0x409 (media error) <F>
[ 38.371355] ata1.00: status: { DRDY ERR }
[ 38.371381] ata1.00: error: { UNC }
[ 38.371406] ata1.00: failed command: READ FPDMA QUEUED
[ 38.371437] ata1.00: cmd 60/00:d0:80:b1:3c/01:00:09:00:00/40 tag 26 ncq dma 131072 in
res 41/40:d0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 38.371522] ata1.00: status: { DRDY ERR }
[ 38.371548] ata1.00: error: { UNC }
[ 38.382123] ata1: hard resetting link
[ 38.697910] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 38.765119] ata1.00: configured for UDMA/100
[ 38.765582] sd 0:0:0:0: [sda] tag#5 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 38.765592] sd 0:0:0:0: [sda] tag#5 Sense Key : Medium Error [current]
[ 38.765599] sd 0:0:0:0: [sda] tag#5 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.765605] sd 0:0:0:0: [sda] tag#5 CDB: Read(10) 28 00 17 fa 30 a0 00 00 30 00
[ 38.765608] I/O error, dev sda, sector 402272416 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 38.765713] sd 0:0:0:0: [sda] tag#6 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=2s
[ 38.765720] sd 0:0:0:0: [sda] tag#6 Sense Key : Medium Error [current]
[ 38.765724] sd 0:0:0:0: [sda] tag#6 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.765729] sd 0:0:0:0: [sda] tag#6 CDB: Write(10) 2a 00 00 3c b8 00 00 00 08 00
[ 38.765732] I/O error, dev sda, sector 3979264 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[ 38.765791] EXT4-fs warning (device sda1): ext4_end_bio:343: I/O error 10 writing to inode 131324 starting block 497408)
[ 38.765810] sd 0:0:0:0: [sda] tag#7 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 38.765814] sd 0:0:0:0: [sda] tag#7 Sense Key : Medium Error [current]
[ 38.765817] sd 0:0:0:0: [sda] tag#7 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.765820] sd 0:0:0:0: [sda] tag#7 CDB: Read(10) 28 00 4b 85 3a 08 00 01 00 00
[ 38.765823] I/O error, dev sda, sector 1267022344 op 0x0:(READ) flags 0x80700 phys_seg 3 prio class 2
[ 38.765857] Buffer I/O error on device sda1, logical block 497152
[ 38.765890] sd 0:0:0:0: [sda] tag#24 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 38.766916] sd 0:0:0:0: [sda] tag#24 Sense Key : Medium Error [current]
[ 38.766920] sd 0:0:0:0: [sda] tag#24 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.766924] sd 0:0:0:0: [sda] tag#24 CDB: Read(10) 28 00 72 20 ed 70 00 00 08 00
[ 38.766926] I/O error, dev sda, sector 1914760560 op 0x0:(READ) flags 0x80700 phys_seg 1 prio class 2
[ 38.768264] sd 0:0:0:0: [sda] tag#25 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 38.768272] sd 0:0:0:0: [sda] tag#25 Sense Key : Medium Error [current]
[ 38.768280] sd 0:0:0:0: [sda] tag#25 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.768289] sd 0:0:0:0: [sda] tag#25 CDB: Read(10) 28 00 09 3c b0 80 00 01 00 00
[ 38.768294] I/O error, dev sda, sector 154972352 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[ 38.770023] sd 0:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 38.770034] sd 0:0:0:0: [sda] tag#26 Sense Key : Medium Error [current]
[ 38.770044] sd 0:0:0:0: [sda] tag#26 Add. Sense: Unrecovered read error - auto reallocate failed
[ 38.770053] sd 0:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 09 3c b1 80 00 01 00 00
[ 38.770059] I/O error, dev sda, sector 154972544 op 0x0:(READ) flags 0x80700 phys_seg 2 prio class 2
[ 38.772518] ata1: EH complete
[ 42.746260] ata1.00: exception Emask 0x0 SAct 0x680006 SErr 0x50000 action 0x0
[ 42.747643] ata1.00: irq_stat 0x40000001
[ 42.748989] ata1: SError: { PHYRdyChg CommWake }
[ 42.750352] ata1.00: failed command: READ FPDMA QUEUED
[ 42.751672] ata1.00: cmd 60/08:08:88:3a:85/00:00:4b:00:00/40 tag 1 ncq dma 4096 in
res 41/40:b0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 42.754385] ata1.00: status: { DRDY ERR }
[ 42.755745] ata1.00: error: { UNC }
[ 42.757071] ata1.00: failed command: READ FPDMA QUEUED
[ 42.758396] ata1.00: cmd 60/08:10:70:ed:20/00:00:72:00:00/40 tag 2 ncq dma 4096 in
res 41/40:b0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 42.761102] ata1.00: status: { DRDY ERR }
[ 42.762480] ata1.00: error: { UNC }
[ 42.763839] ata1.00: failed command: READ FPDMA QUEUED
[ 42.765208] ata1.00: cmd 60/08:98:c0:b0:3c/00:00:09:00:00/40 tag 19 ncq dma 4096 in
res 41/40:08:c0:b0:3c/00:00:09:00:00/40 Emask 0x409 (media error) <F>
[ 42.767952] ata1.00: status: { DRDY ERR }
[ 42.769311] ata1.00: error: { UNC }
[ 42.770643] ata1.00: failed command: READ FPDMA QUEUED
[ 42.771960] ata1.00: cmd 60/08:a8:00:08:7c/00:00:07:00:00/40 tag 21 ncq dma 4096 in
res 41/40:b0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 42.774748] ata1.00: status: { DRDY ERR }
[ 42.776099] ata1.00: error: { UNC }
[ 42.777445] ata1.00: failed command: WRITE FPDMA QUEUED
[ 42.778761] ata1.00: cmd 61/68:b0:f8:0a:18/00:00:00:00:00/40 tag 22 ncq dma 53248 out
res 41/40:b0:c0:b0:3c/00:00:09:00:00/40 Emask 0x9 (media error)
[ 42.781520] ata1.00: status: { DRDY ERR }
[ 42.782893] ata1.00: error: { UNC }
[ 42.794720] ata1: hard resetting link
[ 43.109597] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 43.120405] ata1.00: configured for UDMA/100
[ 43.121960] sd 0:0:0:0: [sda] tag#1 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 43.121970] sd 0:0:0:0: [sda] tag#1 Sense Key : Medium Error [current]
[ 43.121975] sd 0:0:0:0: [sda] tag#1 Add. Sense: Unrecovered read error - auto reallocate failed
[ 43.121982] sd 0:0:0:0: [sda] tag#1 CDB: Read(10) 28 00 4b 85 3a 88 00 00 08 00
[ 43.121985] I/O error, dev sda, sector 1267022472 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 43.123397] sd 0:0:0:0: [sda] tag#2 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 43.123403] sd 0:0:0:0: [sda] tag#2 Sense Key : Medium Error [current]
[ 43.123408] sd 0:0:0:0: [sda] tag#2 Add. Sense: Unrecovered read error - auto reallocate failed
[ 43.123412] sd 0:0:0:0: [sda] tag#2 CDB: Read(10) 28 00 72 20 ed 70 00 00 08 00
[ 43.123415] I/O error, dev sda, sector 1914760560 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 43.124789] sd 0:0:0:0: [sda] tag#19 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 43.124794] sd 0:0:0:0: [sda] tag#19 Sense Key : Medium Error [current]
[ 43.124798] sd 0:0:0:0: [sda] tag#19 Add. Sense: Unrecovered read error - auto reallocate failed
[ 43.124803] sd 0:0:0:0: [sda] tag#19 CDB: Read(10) 28 00 09 3c b0 c0 00 00 08 00
[ 43.124806] I/O error, dev sda, sector 154972352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 43.126078] sd 0:0:0:0: [sda] tag#21 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 43.126087] sd 0:0:0:0: [sda] tag#21 Sense Key : Medium Error [current]
[ 43.126093] sd 0:0:0:0: [sda] tag#21 Add. Sense: Unrecovered read error - auto reallocate failed
[ 43.126099] sd 0:0:0:0: [sda] tag#21 CDB: Read(10) 28 00 07 7c 08 00 00 00 08 00
[ 43.126103] I/O error, dev sda, sector 125569024 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 43.127697] ata1: EH complete
[ 43.128436] Aborting journal on device sda1-8.
[ 47.042131] ata1.00: exception Emask 0x0 SAct 0x4000000 SErr 0x40000 action 0x0
[ 47.043520] ata1.00: irq_stat 0x40000008
[ 47.044875] ata1: SError: { CommWake }
[ 47.046267] ata1.00: failed command: READ FPDMA QUEUED
[ 47.047858] ata1.00: cmd 60/08:d0:c0:b0:3c/00:00:09:00:00/40 tag 26 ncq dma 4096 in
res 41/40:08:c0:b0:3c/00:00:09:00:00/40 Emask 0x409 (media error) <F>
[ 47.050641] ata1.00: status: { DRDY ERR }
[ 47.052099] ata1.00: error: { UNC }
[ 47.063946] ata1: hard resetting link
[ 47.377341] ata1: SATA link up 6.0 Gbps (SStatus 133 SControl 300)
[ 47.389549] ata1.00: configured for UDMA/100
[ 47.391124] scsi_io_completion_action: 1 callbacks suppressed
[ 47.391141] sd 0:0:0:0: [sda] tag#26 FAILED Result: hostbyte=DID_OK driverbyte=DRIVER_OK cmd_age=4s
[ 47.391152] sd 0:0:0:0: [sda] tag#26 Sense Key : Medium Error [current]
[ 47.391158] sd 0:0:0:0: [sda] tag#26 Add. Sense: Unrecovered read error - auto reallocate failed
[ 47.391164] sd 0:0:0:0: [sda] tag#26 CDB: Read(10) 28 00 09 3c b0 c0 00 00 08 00
[ 47.391167] blk_print_req_error: 1 callbacks suppressed
[ 47.391170] I/O error, dev sda, sector 154972352 op 0x0:(READ) flags 0x0 phys_seg 1 prio class 2
[ 47.392599] ata1: EH complete
[ 47.750462] EXT4-fs error (device sda1): ext4_journal_check_start:83: comm mariadbd: Detected aborted journal
[ 47.804083] EXT4-fs (sda1): Remounting filesystem read-only
[ 61.570714] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 122.642330] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 797.440974] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 806.901827] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 818.711180] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 909.630035] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user
[ 924.288282] EXT4-fs error (device sda1): __ext4_remount:6425: comm mount: Abort forced by user