Unable to connect to University's WIFI PEAP No Validation Required

Troubleshooting
1

I seek your advise on connection to dietpi to my University’s wifi. It is based on PEAP-MSChapV2 and no validation required. Thank you.

2

This is just WPA 2 enterprise, right?

Did it not work with dietpi-config → 7 : Network Options: Adapter ?

3

no, i am unable to find the option to configure the wifi.

4

Can you please fill out the troubleshooting form?

5

Required

  • DietPi version | cat /boot/dietpi/.version
  • Distro version | echo $G_DISTRO_NAME $G_RASPBIAN
  • Kernel version | uname -a
  • Architecture | dpkg --print-architecture
  • SBC model | echo $G_HW_MODEL_NAME or (EG: RPi3)
  • Power supply used | (EG: 5V 1A RAVpower)
  • SDcard used | (EG: SanDisk ultra)
6 
DietPi version |
G_DIETPI_VERSION_CORE=8
G_DIETPI_VERSION_SUB=16
G_DIETPI_VERSION_RC=2
G_GITBRANCH=‘master’
G_GITOWNER=‘MichaIng’
G_LIVE_PATCH_STATUS[0]=‘applied’

Distro version |
bullseye 0

Kernel version |
Linux DietPi 6.1.21-v8+ #1642 SMP PREEMPT Mon Apr 3 17:24:16 BST 2023 aarch64 GNU/Linux

Architecture | arm64

SBC model | RPi 4 Model B (aarch64)

SD card used | 32GB SanDisk ultra

Additional Information (if applicable)

Software title | Wifi
Fresh Install
Can this issue be replicated on a fresh installation of DietPi? | Yes
7

You are trying to use on-board WiFi? Does it is enabled within dietpi-config? If yes, did you reboot afterwards to make the interface available?

8

i am able to connect to other wifi. However, i am unable to connect to univeristy’s with wifi that requires wpa2 enterprise.

9

Looks like some manuell steps are needed RPi 3b+ or RPi 4 WPA2e (WPA2 Enterprise) - Raspberry Pi Forums