Sound USB Stick / Alsa...

Troubleshooting
1

Hi all,

I own a RPi B+, I wanted to attach use the usb sound card as default but I didn’t manage at all. I googled for about 2 days… but no help.
The max I could made is to use aplay or speaker-test using -c 2 with D hw1 (or plughw1). But no more :frowning:.

Please help!

I attached all my outputs from the commands I made till now:
modprobe.d/alsa-base.conf" is :

options snd_bcm2835 index=0
options snd_usb_audio index=1
options snd=snd_usb_audio,snd_bcm2835

If I put 0 to usb the usb don’t appear at all.

aplay -l:

**** List of PLAYBACK Hardware Devices ****
card 0: ALSA [bcm2835 ALSA], device 0: bcm2835 ALSA [bcm2835 ALSA]
  Subdevices: 8/8
  Subdevice #0: subdevice #0
  Subdevice #1: subdevice #1
  Subdevice #2: subdevice #2
  Subdevice #3: subdevice #3
  Subdevice #4: subdevice #4
  Subdevice #5: subdevice #5
  Subdevice #6: subdevice #6
  Subdevice #7: subdevice #7
card 0: ALSA [bcm2835 ALSA], device 1: bcm2835 ALSA [bcm2835 IEC958/HDMI]
  Subdevices: 1/1
  Subdevice #0: subdevice #0
card 1: Device [USB PnP Sound Device], device 0: USB Audio [USB Audio]
  Subdevices: 1/1
  Subdevice #0: subdevice #0

aplay -L

null
    Discard all samples (playback) or generate zero samples (capture)
sysdefault:CARD=ALSA
    bcm2835 ALSA, bcm2835 ALSA
    Default Audio Device
dmix:CARD=ALSA,DEV=0
    bcm2835 ALSA, bcm2835 ALSA
    Direct sample mixing device
dmix:CARD=ALSA,DEV=1
    bcm2835 ALSA, bcm2835 IEC958/HDMI
    Direct sample mixing device
dsnoop:CARD=ALSA,DEV=0
    bcm2835 ALSA, bcm2835 ALSA
    Direct sample snooping device
dsnoop:CARD=ALSA,DEV=1
    bcm2835 ALSA, bcm2835 IEC958/HDMI
    Direct sample snooping device
hw:CARD=ALSA,DEV=0
    bcm2835 ALSA, bcm2835 ALSA
    Direct hardware device without any conversions
hw:CARD=ALSA,DEV=1
    bcm2835 ALSA, bcm2835 IEC958/HDMI
    Direct hardware device without any conversions
plughw:CARD=ALSA,DEV=0
    bcm2835 ALSA, bcm2835 ALSA
    Hardware device with all software conversions
plughw:CARD=ALSA,DEV=1
    bcm2835 ALSA, bcm2835 IEC958/HDMI
    Hardware device with all software conversions
sysdefault:CARD=Device
    USB PnP Sound Device, USB Audio
    Default Audio Device
front:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Front speakers
surround21:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    4.0 Surround output to Front and Rear speakers
surround41:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct sample mixing device
dsnoop:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct sample snooping device
hw:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Direct hardware device without any conversions
plughw:CARD=Device,DEV=0
    USB PnP Sound Device, USB Audio
    Hardware device with all software conversions

I ran the script from alsa-project.org, the link is: http://www.alsa-project.org/db/?f=c58b2369558ac131fe87ed2aab0cf27f4ed43fb3

And to be true after hundreds of changes, the system is not working at all right now :slight_smile:

Help :slight_smile:.

2

On a fresh DietPi install without manual changes. You can setup a USB DAC by simply:
dietpi-config > Audio Options > Sound Card > USB DAC

DietPi will then setup /etc/asound.conf as needed, default card on system.

3

Thanks, but the problem is that it disable the bcm8035 from the board. I wanted both of them.

I turn all this system upside down, and unfortunately the problem was the typo in alsa-base.conf. And I lost 2 days :frowning:.

You can close this topic.

Thank you,
Keos