Reboot hangs on USB SSD usage

Tubz · 2 November 2023 18:38

New topic from another post where on reboot it hangs, doesn’t do anything until power is removed and added. The fresh install had the same problems, all on RPi 3B with USB SSD. And also a bootloader from Raspi imager.

Tubz · 2 November 2023 18:39

@MichaIng new topic here

Cerebric · 2 November 2023 18:50

I have the same problem with a RPI4 and SSD under DietPi bookworm and went back to the DietPi bullseye release. There I don’t have the problem with the reboot.
Under raspian bookworm with SSD I have strangely no problems with the reboot but I would like to stay with DietPi and use DietPi bullseye for now.

Tubz · 2 November 2023 19:02

is there much of a difference between bookworm and bullseye besides the obvious lack of some features, and where do i even get the previous version?

Nvm found it underneath the download for bookworm

Cerebric · 2 November 2023 19:05

All DietPi images

https://dietpi.com/downloads/images/

Joulinar · 3 November 2023 07:01

does the system rebooting correctly if you use a SD card (without SSD). All my RPis rebooting without any issue.

There is no difference from DietPi point of view. The underlying Debian is the main difference.

Tubz · 3 November 2023 11:48

yes, the last time I used an SD card flashed with Dietpi and Bookworm version, it did reboot. It seems to be an issue only for booting off the SSD. If the fix to the problem is too complex or long, I might as well move to Buster. Is there any efficient way of backing up my files to my PC the moving them back to the fresh drive?

Joulinar · 3 November 2023 16:12

how are external drives powered? just via RPI or are they using own external PSU?

Tubz · 3 November 2023 17:07

It’s a Kingston 120GB A400 2.5" SSD, it’s powered by a USB case I brought ages ago, just clips in and has this weird two combined port USB micro to a USB-A. Bare in mind long time ago it worked perfectly, also the PI is overclocked and has access to the correct voltage so I doubt it’s a problem with the power supply.

Cerebric · 3 November 2023 17:30

This list is very helpful

https://jamesachambers.com/raspberry-pi-4-usb-boot-config-guide-for-ssd-flash-drives/

Tubz · 3 November 2023 17:42

I’ve got a Pi 3b and anyways it has USB boot support, I’m gonna wait on what @Joulinar says otherwise I’m gonna back up what I can and downgrade

Joulinar · 3 November 2023 20:21

In general, independent from this issue, we highly recommend to use external PSU for USB drives on RPI4, because RPi4 is not designed to power larger USB devices.

For testing I used

RPi4B 8GB
latest DietPi Bookworm image (64bit)
WD Red HDD 3TB
USB3 to SATA adaptor incl own PSU
direct boot from HDD, no SD card

And I’m not able to replicate the behaviour. For me, RPI4 is rebooting from HDD all the time without issues.

Means there is no general issue rebooting RPI4 from HDD on Debian Bookworm.

Tubz · 3 November 2023 20:35

Could it be that the rpi3b has a different behavior? Because I used the external SSD for a solid 5-6 months before I ran the upgrade, it was doing the job well of hosting a terraria server and a discord bot, until it didnt

MichaIng · 3 November 2023 20:51

For easier debuggin, you can enable permanent system logs:

dietpi-software uninstall 103
mkdir /var/log/journal
poweroff

A poweroff is also interesting, i.e. to know whether really the shutdown sequence hangs, do that the board never powers down, or really bootup after warm reboot.
After reboot, permanent logging is on. So the you can perform a reboot, and when it hangs, do a power cycle, and after next bootup:

journalctl

This will then contain logs from the previous boot session(s) as well.

I wonder whether the USB drive is detected too slow. There is a way to delay boot at two stages for such cases, let me check back the docs.

EDIT: Right here it is: Raspberry Pi Documentation - Legacy config.txt options
boot_delay=5 could be added to /boot/config.txt, in case it is really bootup which hangs, instead of shutdown. I have no idea why it would take longer on reboot than on cold boot, but who knows.

The other option should be applied already: /boot/cmdline.txt should contain rootwait, which instructs the kernel to wait (indefinitely) for the root device to become available.

Tubz · 3 November 2023 21:36

root@tubzpi:~# journalctl
Nov 03 21:25:50 tubzpi.xyz kernel: Booting Linux on physical CPU 0x0000000000 [0
x410fd034]
Nov 03 21:25:50 tubzpi.xyz kernel: Linux version 6.1.21-
v8+ (dom@buildbot) (aarch64-linux-gnu-gcc-8 (Ubuntu/Linaro 8.4.0-3ubuntu1) 8.4.0
, GNU ld (GNU Binutils for Ubuntu) 2.34) #1642 SMP PREEMPT Mon Apr  3 17:24:16 B
ST 2023
Nov 03 21:25:50 tubzpi.xyz kernel: random: crng init don
e
Nov 03 21:25:50 tubzpi.xyz kernel: Machine model: Raspberry Pi 3 Model B Rev 1.2
Nov 03 21:25:50 tubzpi.xyz kernel: efi: UEFI not found.
Nov 03 21:25:50 tubzpi.xyz kernel: Reserved memory: created CMA memory pool at 0
x000000003a400000, size 64 MiB
Nov 03 21:25:50 tubzpi.xyz kernel: OF: reserved mem: initialized node linux,cma,
 compatible id shared-dma-pool
Nov 03 21:25:50 tubzpi.xyz kernel: Zone ranges:
Nov 03 21:25:50 tubzpi.xyz kernel:   DMA      [mem 0x0000000000000000-0x00000000
3e5fffff]
Nov 03 21:25:50 tubzpi.xyz kernel:   DMA32    empty
Nov 03 21:25:50 tubzpi.xyz kernel:   Normal   empty
Nov 03 21:25:50 tubzpi.xyz kernel: Movable zone start for each node
Nov 03 21:25:50 tubzpi.xyz kernel: Early memory node ranges
Nov 03 21:25:50 tubzpi.xyz kernel:   node   0: [mem 0x0000000000000000-0x0000000
03e5fffff]
Nov 03 21:25:50 tubzpi.xyz kernel:   DMA32    empty
Nov 03 21:25:50 tubzpi.xyz kernel:   Normal   empty
Nov 03 21:25:50 tubzpi.xyz kernel: Movable zone start for each node
Nov 03 21:25:50 tubzpi.xyz kernel: Early memory node ranges
Nov 03 21:25:50 tubzpi.xyz kernel:   node   0: [mem 0x0000000000000000-0x0000000
03e5fffff]
Nov 03 21:25:50 tubzpi.xyz kernel: Initmem setup node 0 [mem 0x0000000000000000-
0x000000003e5fffff]
Nov 03 21:25:50 tubzpi.xyz kernel: On node 0, zone DMA: 6656 pages in unavailabl
e ranges
Nov 03 21:25:50 tubzpi.xyz kernel: percpu: Embedded 29 pages/cpu s78504 r8192 d3
2088 u118784
Nov 03 21:25:50 tubzpi.xyz kernel: pcpu-alloc: s
78504 r8192 d32088 u118784 alloc=29*4096
Nov 03 21:25:50 tubzpi.xyz kernel: pcpu-alloc: [
0] 0 [0] 1 [0] 2 [0] 3
Nov 03 21:25:50 tubzpi.xyz kernel: Detected VIPT I-cache on CPU0
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: kernel page table isolation for
ced ON by KASLR
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: Kernel page table iso
lation (KPTI)
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: ARM erratum 843419
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: ARM erratum 845719
Nov 03 21:25:50 tubzpi.xyz kernel: alternatives: applying boot alternatives
Nov 03 21:25:50 tubzpi.xyz kernel: Built 1 zonelists, mobility grouping on.  Tot
al pages: 251496
Nov 03 21:25:50 tubzpi.xyz kernel: Kernel command line:
coherent_pool=1M 8250.nr_uarts=0 snd_bcm2835.enable_headphones=0 snd_bcm2835.ena
ble_headphones=1 snd_bcm2835.enable_hdmi=1 bcm2708_fb.fbwidth=1920 bcm2708_fb.fb
height=1080 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f000000 vc_mem.mem_size=0x3f600000  root=PARTUUID=75a4f786-02 rootfstype=ext4 rootwait net.ifnames=0 logo.nologo console=tty1
Nov 03 21:25:50 tubzpi.xyz kernel: Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: mem auto-init: stack:off, heap alloc:off, heap free:off
Nov 03 21:25:50 tubzpi.xyz kernel: Memory: 912836K/1021952K available (11776K kernel code, 2106K rwdata, 3688K rodata, 4160K init, 1077K bss, 43580K reserved, 65536K cma-reserved)
Nov 03 21:25:50 tubzpi.xyz kernel: SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1
Nov 03 21:25:50 tubzpi.xyz kernel: ftrace: allocating 39744 entries in 156 pages
Nov 03 21:25:50 tubzpi.xyz kernel: ftrace: allocated 156 pages with 4 groups
Nov 03 21:25:50 tubzpi.xyz kernel: trace event string verifier disabled
Nov 03 21:25:50 tubzpi.xyz kernel: rcu: Preemptible hierarchical RCU implementation.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu:         RCU event tracing is enabled.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu:         RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4.
Nov 03 21:25:50 tubzpi.xyz kernel:         Trampoline variant of Tasks RCU enabled.
Nov 03 21:25:50 tubzpi.xyz kernel:         Rude variant of Tasks RCU enabled.
Nov 03 21:25:50 tubzpi.xyz kernel:         Tracing variant of Tasks RCU enabled.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4
Nov 03 21:25:50 tubzpi.xyz kernel: NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0
Nov 03 21:25:50 tubzpi.xyz kernel: Root IRQ handler: bcm2836_arm_irqchip_handle_irq
Nov 03 21:25:50 tubzpi.xyz kernel: rcu: srcu_init: Setting srcu_struct sizes based on contention.
Nov 03 21:25:50 tubzpi.xyz kernel: arch_timer: cp15 timer(s) running at 19.20MHz (phys).
Nov 03 21:25:50 tubzpi.xyz kernel: clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns
Nov 03 21:25:50 tubzpi.xyz kernel: sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns
Nov 03 21:25:50 tubzpi.xyz kernel: Console: colour dummy device 80x25
Nov 03 21:25:50 tubzpi.xyz kernel: printk: console [tty1] enabled
Nov 03 21:25:50 tubzpi.xyz kernel: Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=76800)
Nov 03 21:25:50 tubzpi.xyz kernel: pid_max: default: 32768 minimum: 301
Nov 03 21:25:50 tubzpi.xyz kernel: LSM: Security Framework initializing
Nov 03 21:25:50 tubzpi.xyz kernel: Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: cgroup: Disabling memory control group subsystem
Nov 03 21:25:50 tubzpi.xyz kernel: cblist_init_generic: Setting adjustable number of callback queues.
Nov 03 21:25:50 tubzpi.xyz kernel: cblist_init_generic: Setting shift to 2 and lim to 1.
Nov 03 21:25:50 tubzpi.xyz kernel: cblist_init_generic: Setting shift to 2 and lim to 1.
Nov 03 21:25:50 tubzpi.xyz kernel: cblist_init_generic: Setting shift to 2 and lim to 1.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu: Hierarchical SRCU implementation.
Nov 03 21:25:50 tubzpi.xyz kernel: rcu:         Max phase no-delay instances is 1000.
Nov 03 21:25:50 tubzpi.xyz kernel: EFI services will not be available.
Nov 03 21:25:50 tubzpi.xyz kernel: smp: Bringing up secondary CPUs ...
Nov 03 21:25:50 tubzpi.xyz kernel: Detected VIPT I-cache on CPU1
Nov 03 21:25:50 tubzpi.xyz kernel: CPU1: Booted secondary processor 0x0000000001 [0x410fd034]
Nov 03 21:25:50 tubzpi.xyz kernel: Detected VIPT I-cache on CPU2
Nov 03 21:25:50 tubzpi.xyz kernel: CPU2: Booted secondary processor 0x0000000002 [0x410fd034]
Nov 03 21:25:50 tubzpi.xyz kernel: Detected VIPT I-cache on CPU3
Nov 03 21:25:50 tubzpi.xyz kernel: CPU3: Booted secondary processor 0x0000000003 [0x410fd034]
Nov 03 21:25:50 tubzpi.xyz kernel: smp: Brought up 1 node, 4 CPUs
Nov 03 21:25:50 tubzpi.xyz kernel: SMP: Total of 4 processors activated.
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: 32-bit EL0 Support
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: 32-bit EL1 Support
Nov 03 21:25:50 tubzpi.xyz kernel: CPU features: detected: CRC32 instructions
Nov 03 21:25:50 tubzpi.xyz kernel: CPU: All CPU(s) started at EL2
Nov 03 21:25:50 tubzpi.xyz kernel: alternatives: applying system-wide alternatives
Nov 03 21:25:50 tubzpi.xyz kernel: devtmpfs: initialized
Nov 03 21:25:50 tubzpi.xyz kernel: Enabled cp15_barrier support
Nov 03 21:25:50 tubzpi.xyz kernel: Enabled setend support
Nov 03 21:25:50 tubzpi.xyz kernel: clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns
Nov 03 21:25:50 tubzpi.xyz kernel: futex hash table entries: 1024 (order: 4, 65536 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: pinctrl core: initialized pinctrl subsystem
Nov 03 21:25:50 tubzpi.xyz kernel: DMI not present or invalid.
Nov 03 21:25:50 tubzpi.xyz kernel: NET: Registered PF_NETLINK/PF_ROUTE protocol family
Nov 03 21:25:50 tubzpi.xyz kernel: DMA: preallocated 1024 KiB GFP_KERNEL pool for atomic allocations
Nov 03 21:25:50 tubzpi.xyz kernel: DMA: preallocated 1024 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations
Nov 03 21:25:50 tubzpi.xyz kernel: audit: initializing netlink subsys (disabled)
Nov 03 21:25:50 tubzpi.xyz kernel: audit: type=2000 audit(0.032:1): state=initialized audit_enabled=0 res=1
Nov 03 21:25:50 tubzpi.xyz kernel: thermal_sys: Registered thermal governor 'step_wise'
Nov 03 21:25:50 tubzpi.xyz kernel: cpuidle: using governor menu
Nov 03 21:25:50 tubzpi.xyz kernel: hw-breakpoint: found 6 breakpoint and 4 watchpoint registers.
Nov 03 21:25:50 tubzpi.xyz kernel: ASID allocator initialised with 32768 entries
Nov 03 21:25:50 tubzpi.xyz kernel: Serial: AMBA PL011 UART driver
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2835-mbox 3f00b880.mailbox: mailbox enabled
Nov 03 21:25:50 tubzpi.xyz kernel: raspberrypi-firmware soc:firmware: Attached to firmware from 2023-03-17T10:53:00, variant start_cd
Nov 03 21:25:50 tubzpi.xyz kernel: raspberrypi-firmware soc:firmware: Firmware hash is 82f3750a65fadae9a38077e3c2e217ad158c8d54
Nov 03 21:25:50 tubzpi.xyz kernel: KASLR enabled
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2835-dma 3f007000.dma: DMA legacy API manager, dmachans=0x1
Nov 03 21:25:50 tubzpi.xyz kernel: SCSI subsystem initialized
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver usbfs
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver hub
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new device driver usb
Nov 03 21:25:50 tubzpi.xyz kernel: usb_phy_generic phy: supply vcc not found, using dummy regulator
Nov 03 21:25:50 tubzpi.xyz kernel: usb_phy_generic phy: dummy supplies not allowed for exclusive requests
Nov 03 21:25:50 tubzpi.xyz kernel: pps_core: LinuxPPS API ver. 1 registered
Nov 03 21:25:50 tubzpi.xyz kernel: pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti <giometti@linux.it>
Nov 03 21:25:50 tubzpi.xyz kernel: PTP clock support registered
Nov 03 21:25:50 tubzpi.xyz kernel: vgaarb: loaded
Nov 03 21:25:50 tubzpi.xyz kernel: clocksource: Switched to clocksource arch_sys_counter
Nov 03 21:25:50 tubzpi.xyz kernel: VFS: Disk quotas dquot_6.6.0
Nov 03 21:25:50 tubzpi.xyz kernel: VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
Nov 03 21:25:50 tubzpi.xyz kernel: FS-Cache: Loaded
Nov 03 21:25:50 tubzpi.xyz kernel: CacheFiles: Loaded
Nov 03 21:25:50 tubzpi.xyz kernel: NET: Registered PF_INET protocol family
Nov 03 21:25:50 tubzpi.xyz kernel: IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: TCP: Hash tables configured (established 8192 bind 8192)
Nov 03 21:25:50 tubzpi.xyz kernel: UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
Nov 03 21:25:50 tubzpi.xyz kernel: NET: Registered PF_UNIX/PF_LOCAL protocol family
Nov 03 21:25:50 tubzpi.xyz kernel: RPC: Registered named UNIX socket transport module.
Nov 03 21:25:50 tubzpi.xyz kernel: RPC: Registered udp transport module.
Nov 03 21:25:50 tubzpi.xyz kernel: RPC: Registered tcp transport module.
Nov 03 21:25:50 tubzpi.xyz kernel: RPC: Registered tcp NFSv4.1 backchannel transport module.
Nov 03 21:25:50 tubzpi.xyz kernel: PCI: CLS 0 bytes, default 64
Nov 03 21:25:50 tubzpi.xyz kernel: hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available
Nov 03 21:25:50 tubzpi.xyz kernel: kvm [1]: IPA Size Limit: 40 bits
Nov 03 21:25:50 tubzpi.xyz kernel: kvm [1]: Hyp mode initialized successfully
Nov 03 21:25:50 tubzpi.xyz kernel: Initialise system trusted keyrings
Nov 03 21:25:50 tubzpi.xyz kernel: workingset: timestamp_bits=46 max_order=18 bucket_order=0
Nov 03 21:25:50 tubzpi.xyz kernel: zbud: loaded
Nov 03 21:25:50 tubzpi.xyz kernel: NFS: Registering the id_resolver key type
Nov 03 21:25:50 tubzpi.xyz kernel: Key type id_resolver registered
Nov 03 21:25:50 tubzpi.xyz kernel: Key type id_legacy registered
Nov 03 21:25:50 tubzpi.xyz kernel: nfs4filelayout_init: NFSv4 File Layout Driver Registering...
Nov 03 21:25:50 tubzpi.xyz kernel: nfs4flexfilelayout_init: NFSv4 Flexfile Layout Driver Registering...
Nov 03 21:25:50 tubzpi.xyz kernel: Key type asymmetric registered
Nov 03 21:25:50 tubzpi.xyz kernel: Asymmetric key parser 'x509' registered
Nov 03 21:25:50 tubzpi.xyz kernel: Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247)
Nov 03 21:25:50 tubzpi.xyz kernel: io scheduler mq-deadline registered
Nov 03 21:25:50 tubzpi.xyz kernel: io scheduler kyber registered
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2708_fb soc:fb: FB found 1 display(s)
Nov 03 21:25:50 tubzpi.xyz kernel: Console: switching to colour frame buffer device 240x67
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2708_fb soc:fb: Registered framebuffer for display 0, size 1920x1080
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2835-rng 3f104000.rng: hwrng registered
Nov 03 21:25:50 tubzpi.xyz kernel: vc-mem: phys_addr:0x00000000 mem_base=0x3f000000 mem_size:0x3f600000(1014 MiB)
Nov 03 21:25:50 tubzpi.xyz kernel: gpiomem-bcm2835 3f200000.gpiomem: Initialised: Registers at 0x3f200000
Nov 03 21:25:50 tubzpi.xyz kernel: brd: module loaded
Nov 03 21:25:50 tubzpi.xyz kernel: loop: module loaded
Nov 03 21:25:50 tubzpi.xyz kernel: Loading iSCSI transport class v2.0-870.
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver r8152
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver lan78xx
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver smsc95xx
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg: version 3.00a 10-AUG-2012 (platform bus)
Nov 03 21:25:50 tubzpi.xyz kernel: Core Release: 2.80a
Nov 03 21:25:50 tubzpi.xyz kernel: Setting default values for core params
Nov 03 21:25:50 tubzpi.xyz kernel: Finished setting default values for core params
Nov 03 21:25:50 tubzpi.xyz kernel: Using Buffer DMA mode
Nov 03 21:25:50 tubzpi.xyz kernel: Periodic Transfer Interrupt Enhancement - disabled
Nov 03 21:25:50 tubzpi.xyz kernel: Multiprocessor Interrupt Enhancement - disabled
Nov 03 21:25:50 tubzpi.xyz kernel: OTG VER PARAM: 0, OTG VER FLAG: 0
Nov 03 21:25:50 tubzpi.xyz kernel: Dedicated Tx FIFOs mode
Nov 03 21:25:50 tubzpi.xyz kernel:
Nov 03 21:25:50 tubzpi.xyz kernel: WARN::dwc_otg_hcd_init:1074: FIQ DMA bounce buffers: virt = ffffffc008459000 dma = 0x00000000fa810000 len=9024
Nov 03 21:25:50 tubzpi.xyz kernel: FIQ FSM acceleration enabled for :
                                   Non-periodic Split Transactions
                                   Periodic Split Transactions
                                   High-Speed Isochronous Endpoints
                                   Interrupt/Control Split Transaction hack enabled
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg: Microframe scheduler enabled
Nov 03 21:25:50 tubzpi.xyz kernel:
Nov 03 21:25:50 tubzpi.xyz kernel: WARN::hcd_init_fiq:497: MPHI regs_base at ffffffc00806d000
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg 3f980000.usb: DWC OTG Controller
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg 3f980000.usb: new USB bus registered, assigned bus number 1
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg 3f980000.usb: irq 74, io mem 0x00000000
Nov 03 21:25:50 tubzpi.xyz kernel: Init: Port Power? op_state=1
Nov 03 21:25:50 tubzpi.xyz kernel: Init: Power Port (0)
Nov 03 21:25:50 tubzpi.xyz kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
Nov 03 21:25:50 tubzpi.xyz kernel: usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
Nov 03 21:25:50 tubzpi.xyz kernel: usb usb1: Product: DWC OTG Controller
Nov 03 21:25:50 tubzpi.xyz kernel: usb usb1: Manufacturer: Linux 6.1.21-v8+ dwc_otg_hcd
Nov 03 21:25:50 tubzpi.xyz kernel: usb usb1: SerialNumber: 3f980000.usb
Nov 03 21:25:50 tubzpi.xyz kernel: hub 1-0:1.0: USB hub found
Nov 03 21:25:50 tubzpi.xyz kernel: hub 1-0:1.0: 1 port detected
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg: FIQ enabled
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg: NAK holdoff enabled
Nov 03 21:25:50 tubzpi.xyz kernel: dwc_otg: FIQ split-transaction FSM enabled
Nov 03 21:25:50 tubzpi.xyz kernel: Module dwc_common_port init
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver uas
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver usb-storage
Nov 03 21:25:50 tubzpi.xyz kernel: mousedev: PS/2 mouse device common for all mice
Nov 03 21:25:50 tubzpi.xyz kernel: sdhci: Secure Digital Host Controller Interface driver
Nov 03 21:25:50 tubzpi.xyz kernel: sdhci: Copyright(c) Pierre Ossman
Nov 03 21:25:50 tubzpi.xyz kernel: sdhci-pltfm: SDHCI platform and OF driver helper
Nov 03 21:25:50 tubzpi.xyz kernel: ledtrig-cpu: registered to indicate activity on CPUs
Nov 03 21:25:50 tubzpi.xyz kernel: hid: raw HID events driver (C) Jiri Kosina
Nov 03 21:25:50 tubzpi.xyz kernel: usbcore: registered new interface driver usbhid
Nov 03 21:25:50 tubzpi.xyz kernel: usbhid: USB HID core driver
Nov 03 21:25:50 tubzpi.xyz kernel: NET: Registered PF_PACKET protocol family
Nov 03 21:25:50 tubzpi.xyz kernel: Key type dns_resolver registered
Nov 03 21:25:50 tubzpi.xyz kernel: registered taskstats version 1
Nov 03 21:25:50 tubzpi.xyz kernel: Loading compiled-in X.509 certificates
Nov 03 21:25:50 tubzpi.xyz kernel: Key type .fscrypt registered
Nov 03 21:25:50 tubzpi.xyz kernel: Key type fscrypt-provisioning registered
Nov 03 21:25:50 tubzpi.xyz kernel: uart-pl011 3f201000.serial: cts_event_workaround enabled
Nov 03 21:25:50 tubzpi.xyz kernel: 3f201000.serial: ttyAMA0 at MMIO 0x3f201000 (irq = 99, base_baud = 0) is a PL011 rev2
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2835-wdt bcm2835-wdt: Broadcom BCM2835 watchdog timer
Nov 03 21:25:50 tubzpi.xyz kernel: bcm2835-power bcm2835-power: Broadcom BCM2835 power domains driver
Nov 03 21:25:50 tubzpi.xyz kernel: sdhost: log_buf @ 00000000d61d8bea (c1f43000)
Nov 03 21:25:50 tubzpi.xyz kernel: Indeed it is in host mode hprt0 = 00021501
Nov 03 21:25:50 tubzpi.xyz kernel: mmc0: sdhost-bcm2835 loaded - DMA enabled (>1)
Nov 03 21:25:50 tubzpi.xyz kernel: of_cfs_init
Nov 03 21:25:50 tubzpi.xyz kernel: of_cfs_init: OK
Nov 03 21:25:50 tubzpi.xyz kernel: Waiting for root device PARTUUID=75a4f786-02...
Nov 03 21:25:50 tubzpi.xyz kernel: mmc0: host does not support reading read-only switch, assuming write-enable
Nov 03 21:25:50 tubzpi.xyz kernel: mmc0: new high speed SDHC card at address aaaa
Nov 03 21:25:50 tubzpi.xyz kernel: mmcblk0: mmc0:aaaa SC16G 14.8 GiB
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1: new high-speed USB device number 2 using dwc_otg
Nov 03 21:25:50 tubzpi.xyz kernel: Indeed it is in host mode hprt0 = 00001101
Nov 03 21:25:50 tubzpi.xyz kernel:  mmcblk0: p1
Nov 03 21:25:50 tubzpi.xyz kernel: mmcblk0: mmc0:aaaa SC16G 14.8 GiB (quirks 0x00004000)
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1: New USB device found, idVendor=0424, idProduct=9514, bcdDevice= 2.00
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 03 21:25:50 tubzpi.xyz kernel: hub 1-1:1.0: USB hub found
Nov 03 21:25:50 tubzpi.xyz kernel: hub 1-1:1.0: 5 ports detected
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.1: new high-speed USB device number 3 using dwc_otg
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00, bcdDevice= 2.00
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
Nov 03 21:25:50 tubzpi.xyz kernel: smsc95xx v2.0.0
Nov 03 21:25:50 tubzpi.xyz kernel: SMSC LAN8700 usb-001:003:01: attached PHY driver (mii_bus:phy_addr=usb-001:003:01, irq=184)
Nov 03 21:25:50 tubzpi.xyz kernel: smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f980000.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:22:3a:c1
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.2: new full-speed USB device number 4 using dwc_otg
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.2: New USB device found, idVendor=062a, idProduct=5918, bcdDevice= 1.02
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.2: Product: 2.4G Keyboard Mouse
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.2: Manufacturer: MOSART Semi.
Nov 03 21:25:50 tubzpi.xyz kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.0/0003:062A:5918.0001/input/input0
Nov 03 21:25:50 tubzpi.xyz kernel: hid-generic 0003:062A:5918.0001: input,hidraw0: USB HID v1.10 Keyboard [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input0
Nov 03 21:25:50 tubzpi.xyz kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:5918.0002/input/input1
Nov 03 21:25:50 tubzpi.xyz kernel: input: MOSART Semi. 2.4G Keyboard Mouse Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:5918.0002/input/input2
Nov 03 21:25:50 tubzpi.xyz kernel: input: MOSART Semi. 2.4G Keyboard Mouse System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:5918.0002/input/input3
Nov 03 21:25:50 tubzpi.xyz kernel: input: MOSART Semi. 2.4G Keyboard Mouse as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.2/1-1.2:1.1/0003:062A:5918.0002/input/input4
Nov 03 21:25:50 tubzpi.xyz kernel: hid-generic 0003:062A:5918.0002: input,hiddev96,hidraw1: USB HID v1.10 Mouse [MOSART Semi. 2.4G Keyboard Mouse] on usb-3f980000.usb-1.2/input1
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.4: new low-speed USB device number 5 using dwc_otg
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.4: New USB device found, idVendor=1a2c, idProduct=4c5e, bcdDevice= 1.10
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=0
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.4: Product: USB Keyboard
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.4: Manufacturer: SEMICO
Nov 03 21:25:50 tubzpi.xyz kernel: input: SEMICO USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.0/0003:1A2C:4C5E.0003/input/input5
Nov 03 21:25:50 tubzpi.xyz kernel: hid-generic 0003:1A2C:4C5E.0003: input,hidraw2: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3f980000.usb-1.4/input0
Nov 03 21:25:50 tubzpi.xyz kernel: input: SEMICO USB Keyboard Consumer Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4C5E.0004/input/input6
Nov 03 21:25:50 tubzpi.xyz kernel: input: SEMICO USB Keyboard System Control as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4C5E.0004/input/input7
Nov 03 21:25:50 tubzpi.xyz kernel: input: SEMICO USB Keyboard as /devices/platform/soc/3f980000.usb/usb1/1-1/1-1.4/1-1.4:1.1/0003:1A2C:4C5E.0004/input/input9
Nov 03 21:25:50 tubzpi.xyz kernel: hid-generic 0003:1A2C:4C5E.0004: input,hiddev97,hidraw3: USB HID v1.10 Keyboard [SEMICO USB Keyboard] on usb-3f980000.usb-1.4/input1
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: new high-speed USB device number 6 using dwc_otg
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: New USB device found, idVendor=13fd, idProduct=5910, bcdDevice= 0.58

Tubz · 3 November 2023 21:37

Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: Product: External
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: Manufacturer: Generic
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: SerialNumber: 50026B73802BBFAB
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: The driver for the USB controller dwc_otg_hcd does not support scatter-gather which is
Nov 03 21:25:50 tubzpi.xyz kernel: usb 1-1.5: required by the UAS driver. Please try an other USB controller if you wish to use UAS.
Nov 03 21:25:50 tubzpi.xyz kernel: usb-storage 1-1.5:1.0: USB Mass Storage device detected
Nov 03 21:25:50 tubzpi.xyz kernel: scsi host0: usb-storage 1-1.5:1.0
Nov 03 21:25:50 tubzpi.xyz kernel: scsi 0:0:0:0: Direct-Access     Generic  External         0058 PQ: 0 ANSI: 6
Nov 03 21:25:50 tubzpi.xyz kernel: sd 0:0:0:0: [sda] 234441647 512-byte logical blocks: (120 GB/112 GiB)
Nov 03 21:25:50 tubzpi.xyz kernel: sd 0:0:0:0: [sda] Write Protect is off
Nov 03 21:25:50 tubzpi.xyz kernel: sd 0:0:0:0: [sda] Mode Sense: 47 00 00 08
Nov 03 21:25:50 tubzpi.xyz kernel: sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
Nov 03 21:25:50 tubzpi.xyz kernel:  sda: sda1 sda2
Nov 03 21:25:50 tubzpi.xyz kernel: sd 0:0:0:0: [sda] Attached SCSI disk
Nov 03 21:25:50 tubzpi.xyz kernel: EXT4-fs (sda2): mounted filesystem with ordered data mode. Quota mode: none.
Nov 03 21:25:50 tubzpi.xyz kernel: VFS: Mounted root (ext4 filesystem) readonly on device 8:2.
Nov 03 21:25:50 tubzpi.xyz kernel: devtmpfs: mounted
Nov 03 21:25:50 tubzpi.xyz kernel: Freeing unused kernel memory: 4160K
Nov 03 21:25:50 tubzpi.xyz kernel: Run /sbin/init as init process
Nov 03 21:25:50 tubzpi.xyz kernel:   with arguments:
Nov 03 21:25:50 tubzpi.xyz kernel:     /sbin/init
Nov 03 21:25:50 tubzpi.xyz kernel:   with environment:
Nov 03 21:25:50 tubzpi.xyz kernel:     HOME=/
Nov 03 21:25:50 tubzpi.xyz kernel:     TERM=linux
Nov 03 21:25:50 tubzpi.xyz systemd[1]: System time before build time, advancing clock.
Nov 03 21:25:50 tubzpi.xyz kernel: NET: Registered PF_INET6 protocol family
Nov 03 21:25:50 tubzpi.xyz kernel: Segment Routing with IPv6
Nov 03 21:25:50 tubzpi.xyz kernel: In-situ OAM (IOAM) with IPv6
Nov 03 21:25:50 tubzpi.xyz systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP
 +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Detected architecture arm64.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Hostname set to <tubzpi.xyz>.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Queued start job for default target graphical.target.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Created slice system-getty.slice - Slice /system/getty.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Created slice system-systemd\x2dfsck.slice - Slice /system/systemd-fsck.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Created slice user.slice - User and Session Slice.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target paths.target - Path Units.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target remote-fs.target - Remote File Systems.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target slices.target - Slice Units.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-journald.socket - Journal Socket.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@drm.service - Load Kernel Module drm...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
Nov 03 21:25:50 tubzpi.xyz kernel: device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-fsck-root.service - File System Check on Root Device...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-journald.service - Journal Service...
Nov 03 21:25:50 tubzpi.xyz kernel: fuse: init (API version 7.37)
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@configfs.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@drm.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz kernel: i2c_dev: i2c /dev entries driver
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@drm.service - Load Kernel Module drm.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@fuse.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: modprobe@loop.service: Deactivated successfully.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Started systemd-fsckd.service - File System Check Daemon to report status.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-fsck-root.service - File System Check on Root Device.
Nov 03 21:25:50 tubzpi.xyz systemd-journald[152]: Journal started
Nov 03 21:25:50 tubzpi.xyz systemd-journald[152]: Runtime Journal (/run/log/journal/630c12def0024b8e908b6f4acd8ea28c) is 2.4M, max 19.1M, 16.7M free.
Nov 03 21:25:50 tubzpi.xyz systemd-modules-load[153]: Inserted module 'i2c_bcm2708'
Nov 03 21:25:50 tubzpi.xyz systemd-modules-load[153]: Inserted module 'i2c_dev'
Nov 03 21:25:50 tubzpi.xyz fake-hwclock[137]: Fri Nov  3 21:25:50 UTC 2023
Nov 03 21:25:50 tubzpi.xyz systemd-fsck[156]: /dev/sda2: clean, 160874/7323648 files, 1921130/29272181 blocks
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Started systemd-journald.service - Journal Service.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounted sys-fs-fuse-connections.mount - FUSE Control File System.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Mounted sys-kernel-config.mount - Kernel Configuration File System.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-sysctl.service - Apply Kernel Variables.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
Nov 03 21:25:50 tubzpi.xyz kernel: EXT4-fs (sda2): re-mounted. Quota mode: none.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-remount-fs.service - Remount Root and Kernel File Systems.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Activating swap var-swap.swap - /var/swap...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-journal-flush.service - Flush Journal to Persistent Storage...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-sysusers.service - Create System Users...
Nov 03 21:25:50 tubzpi.xyz kernel: Adding 1115132k swap on /var/swap.  Priority:-2 extents:1 across:1115132k FS
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Activated swap var-swap.swap - /var/swap.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Reached target swap.target - Swaps.
Nov 03 21:25:50 tubzpi.xyz systemd-journald[152]: Time spent on flushing to /var/log/journal/630c12def0024b8e908b6f4acd8ea28c is 22.981ms for 380 entries.
Nov 03 21:25:50 tubzpi.xyz systemd-journald[152]: System Journal (/var/log/journal/630c12def0024b8e908b6f4acd8ea28c) is 8.0M, max 4.0G, 3.9G free.
Nov 03 21:25:51 tubzpi.xyz systemd-journald[152]: Received client request to flush runtime journal.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-sysusers.service - Create System Users.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev...
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-random-seed.service - Load/Save Random Seed.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Finished systemd-udev-trigger.service - Coldplug All udev Devices.
Nov 03 21:25:50 tubzpi.xyz systemd[1]: Starting ifupdown-pre.service - Helper to synchronize boot up for ifupdown...
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Finished systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Reached target local-fs-pre.target - Preparation for Local File Systems.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Set up automount mnt-87dd07e1\x2d5085\x2d469e\x2da372\x2df4890b3c90e0.automount.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Starting systemd-udevd.service - Rule-based Manager for Device Events and Files...
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Finished systemd-journal-flush.service - Flush Journal to Persistent Storage.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Mounting tmp.mount - /tmp...
Nov 03 21:25:51 tubzpi.xyz systemd-udevd[177]: Using default interface naming scheme 'v252'.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Mounted tmp.mount - /tmp.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Started systemd-udevd.service - Rule-based Manager for Device Events and Files.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
Nov 03 21:25:51 tubzpi.xyz systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:51 tubzpi.xyz systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:51 tubzpi.xyz systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: modprobe@loop.service: Deactivated successfully.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
Nov 03 21:25:51 tubzpi.xyz systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
Nov 03 21:25:51 tubzpi.xyz systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
Nov 03 21:25:51 tubzpi.xyz kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
Nov 03 21:25:52 tubzpi.xyz kernel: snd_bcm2835: module is from the staging directory, the quality is unknown, you have been warned.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Found device sys-subsystem-net-devices-eth0.device - SMSC9512/9514 Fast Ethernet Adapter.
Nov 03 21:25:52 tubzpi.xyz kernel: bcm2835_audio bcm2835_audio: card created with 4 channels
Nov 03 21:25:52 tubzpi.xyz kernel: bcm2835_audio bcm2835_audio: card created with 4 channels
Nov 03 21:25:52 tubzpi.xyz systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
Nov 03 21:25:52 tubzpi.xyz systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:52 tubzpi.xyz systemd[1]: first-boot-complete.target - First Boot Complete was skipped because of an unmet condition check (ConditionFirstBoot=yes).
Nov 03 21:25:52 tubzpi.xyz systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore).
Nov 03 21:25:52 tubzpi.xyz systemd[1]: modprobe@loop.service: Deactivated successfully.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Finished ifupdown-pre.service - Helper to synchronize boot up for ifupdown.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Found device dev-disk-by\x2dpartuuid-75a4f786\x2d01.device - KINGSTON_SA400S37120G 1.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Starting systemd-fsck@dev-disk-by\x2dpartuuid-75a4f786\x2d01.service - File System Check on /dev/disk/by-partuuid/75a4f786-01...
Nov 03 21:25:52 tubzpi.xyz systemd-fsck[430]: fsck.fat 4.2 (2021-01-31)
Nov 03 21:25:52 tubzpi.xyz systemd-fsck[430]: /dev/sda1: 381 files, 32791/130039 clusters
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Finished systemd-fsck@dev-disk-by\x2dpartuuid-75a4f786\x2d01.service - File System Check on /dev/disk/by-partuuid/75a4f786-01.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Mounting boot.mount - /boot...
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Mounted boot.mount - /boot.
Nov 03 21:25:52 tubzpi.xyz systemd[1]: Reached target local-fs.target - Local File Systems.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting console-setup.service - Set console font and keymap...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting systemd-binfmt.service - Set Up Additional Binary Formats...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: systemd-machine-id-commit.service - Commit a transient machine-id on disk was skipped because of an unmet condition check (ConditionPathIsMountPoint=/etc/machine-id).
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting systemd-tmpfiles-setup.service - Create Volatile Files and Directories...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting ufw.service - Uncomplicated firewall...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished console-setup.service - Set console font and keymap.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: proc-sys-fs-binfmt_misc.automount: Got automount request for /proc/sys/fs/binfmt_misc, triggered by 435 (systemd-binfmt)
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Mounting proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished ufw.service - Uncomplicated firewall.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Mounted proc-sys-fs-binfmt_misc.mount - Arbitrary Executable File Formats File System.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished systemd-binfmt.service - Set Up Additional Binary Formats.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished systemd-tmpfiles-setup.service - Create Volatile Files and Directories.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting systemd-timesyncd.service - Network Time Synchronization...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting systemd-update-utmp.service - Record System Boot/Shutdown in UTMP...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished systemd-update-utmp.service - Record System Boot/Shutdown in UTMP.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started systemd-timesyncd.service - Network Time Synchronization.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target sysinit.target - System Initialization.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started systemd-tmpfiles-clean.timer - Daily Cleanup of Temporary Directories.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target time-set.target - System Time Set.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started certbot.timer - Run certbot twice daily.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started dpkg-db-backup.timer - Daily dpkg database backup timer.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started fstrim.timer - Discard unused blocks once a week.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started phpsessionclean.timer - Clean PHP session files every 30 mins.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target timers.target - Timer Units.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Listening on dbus.socket - D-Bus System Message Bus Socket.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target sockets.target - Socket Units.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: systemd-pcrphase-sysinit.service - TPM2 PCR Barrier (Initialization) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-4
1cf-b6c7-440b29bb8c4f).
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target basic.target - Basic System.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: alsa-state.service - Manage Sound Card State (restore and store) was skipped because of an unmet condition check (ConditionPathExists=/etc/alsa/state-daemon.conf).
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting alsa-restore.service - Save/Restore Sound Card State...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting dbus.service - D-Bus System Message Bus...
Nov 03 21:25:53 tubzpi.xyz alsactl[446]: alsa-lib parser.c:2783:(load_toplevel_config) Unable to find the top-level configuration file '/usr/share/alsa/ucm2/ucm.conf'.
Nov 03 21:25:53 tubzpi.xyz alsactl[446]: alsa-lib main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:0 use case configuration -2
Nov 03 21:25:53 tubzpi.xyz alsactl[446]: alsa-lib parser.c:2783:(load_toplevel_config) Unable to find the top-level configuration file '/usr/share/alsa/ucm2/ucm.conf'.
Nov 03 21:25:53 tubzpi.xyz alsactl[446]: alsa-lib main.c:1541:(snd_use_case_mgr_open) error: failed to import hw:1 use case configuration -2
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting dietpi-preboot.service - DietPi-PreBoot...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting hciuart.service - Configure Bluetooth Modems connected by UART...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting raspi-config.service - LSB: Switch to ondemand cpu governor (unless shift key is pressed)...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started rngd.service - Start entropy gathering daemon (rngd).
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting systemd-logind.service - User Login Management...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: systemd-pcrphase.service - TPM2 PCR Barrier (User) was skipped because of an unmet condition check (ConditionPathExists=/sys/firmware/efi/efivars/StubPcrKernelImage-4a67b082-0a4c-41cf-b6c7-440b29bb8
c4f).
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished alsa-restore.service - Save/Restore Sound Card State.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target sound.target - Sound Card.
Nov 03 21:25:53 tubzpi.xyz raspi-config[450]: Checking if shift key is held down: No. Switching to ondemand scaling governor.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started raspi-config.service - LSB: Switch to ondemand cpu governor (unless shift key is pressed).
Nov 03 21:25:53 tubzpi.xyz kernel: uart-pl011 3f201000.serial: no DMA platform data
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Started dbus.service - D-Bus System Message Bus.
Nov 03 21:25:53 tubzpi.xyz DietPi-PreBoot[485]:  DietPi-CPU_set
Nov 03 21:25:53 tubzpi.xyz DietPi-PreBoot[485]: ─────────────────────────────────────────────────────
Nov 03 21:25:53 tubzpi.xyz DietPi-PreBoot[485]:  Mode: Applying CPU governor settings: schedutil
Nov 03 21:25:53 tubzpi.xyz DietPi-PreBoot[485]: [  OK  ] DietPi-CPU_set | Applied CPU governor settings: schedutil
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Finished dietpi-preboot.service - DietPi-PreBoot.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Reached target network-pre.target - Preparation for Network.
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting ifup@eth0.service - ifup for eth0...
Nov 03 21:25:53 tubzpi.xyz systemd[1]: Starting networking.service - Raise network interfaces...
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event0 (MOSART Semi. 2.4G Keyboard Mouse)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event2 (MOSART Semi. 2.4G Keyboard Mouse Consumer Control)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event3 (MOSART Semi. 2.4G Keyboard Mouse System Control)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event5 (SEMICO USB Keyboard)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event6 (SEMICO USB Keyboard Consumer Control)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event7 (SEMICO USB Keyboard System Control)
Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: Watching system buttons on /dev/input/event8 (SEMICO USB Keyboard)

Tubz · 3 November 2023 21:37

Nov 03 21:25:54 tubzpi.xyz systemd-logind[464]: New seat seat0.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started systemd-logind.service - User Login Management.
Nov 03 21:25:54 tubzpi.xyz kernel: smsc95xx 1-1.1:1.0 eth0: hardware isn't capable of remote wakeup
Nov 03 21:25:54 tubzpi.xyz kernel: smsc95xx 1-1.1:1.0 eth0: Link is Up - 100Mbps/Full - flow control off
Nov 03 21:25:54 tubzpi.xyz kernel: IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Finished ifup@eth0.service - ifup for eth0.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Finished networking.service - Raise network interfaces.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Reached target network.target - Network.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Reached target network-online.target - Network is Online.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting cloudflared.service - cloudflared...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started dietpi-dashboard.service - Web Dashboard (DietPi).
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started dietpi-postboot.service - DietPi-PostBoot.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started dietpi-autostart_custom.service - DietPi-AutoStart custom script.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started fail2ban.service - Fail2Ban Service.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting lighttpd.service - Lighttpd Daemon...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting mariadb.service - MariaDB 10.11.4 database server...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting nmbd.service - Samba NMB Daemon...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting pihole-FTL.service - Pi-hole FTL...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting samba-ad-dc.service - Samba AD Daemon...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting ssh.service - OpenBSD Secure Shell server...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting systemd-user-sessions.service - Permit User Sessions...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Starting unbound.service - Unbound DNS server...
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Finished systemd-user-sessions.service - Permit User Sessions.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started getty@tty1.service - Getty on tty1.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Reached target getty.target - Login Prompts.
Nov 03 21:25:54 tubzpi.xyz systemd[1]: Started pihole-FTL.service - Pi-hole FTL.
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.232 615M] Using log file /var/log/pihole/FTL.log
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.251 615M] ########## FTL started on tubzpi.xyz! ##########
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] FTL branch: master
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] FTL version: v5.23
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] FTL commit: d201776e
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] FTL date: 2023-05-28 11:55:26 +0100
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] FTL user: pihole
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] Compiled for aarch64 (compiled on CI) using aarch64-linux-gnu-gcc (Debian 8.3.0-2) 8.3.0
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M] Starting config file parsing (/etc/pihole/pihole-FTL.conf)
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M]    SOCKET_LISTENING: only local
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M]    AAAA_QUERY_ANALYSIS: Show AAAA queries
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.252 615M]    MAXDBDAYS: max age for stored queries is 365 days
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.253 615M]    RESOLVE_IPV6: Resolve IPv6 addresses
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.253 615M]    RESOLVE_IPV4: Resolve IPv4 addresses
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.253 615M]    DBINTERVAL: saving to DB file every minute
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.253 615M]    DBFILE: Using /etc/pihole/pihole-FTL.db
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.253 615M]    MAXLOGAGE: Importing up to 24.0 hours of log data
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.261 615M]    PRIVACYLEVEL: Set to 0
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.261 615M]    IGNORE_LOCALHOST: Show queries from localhost
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.261 615M]    BLOCKINGMODE: Null IPs for blocked domains
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.261 615M]    ANALYZE_ONLY_A_AND_AAAA: Disabled. Analyzing all queries
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    DBIMPORT: Importing history from database
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    PIDFILE: Using /run/pihole-FTL.pid
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    SOCKETFILE: Using /run/pihole/FTL.sock
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    SETUPVARSFILE: Using /etc/pihole/setupVars.conf
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    MACVENDORDB: Using /etc/pihole/macvendor.db
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    GRAVITYDB: Using /etc/pihole/gravity.db
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    PARSE_ARP_CACHE: Active
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    CNAME_DEEP_INSPECT: Active
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.262 615M]    DELAY_STARTUP: No delay requested.
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    BLOCK_ESNI: Enabled, blocking _esni.{blocked domain}
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    NICE: Set process niceness to -10 (default)
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    MAXNETAGE: Removing IP addresses and host names from network table after 365 days
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    NAMES_FROM_NETDB: Enabled, trying to get names from network database
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    EDNS0_ECS: Overwrite client from ECS information
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    REFRESH_HOSTNAMES: Periodically refreshing IPv4 names
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    RATE_LIMIT: Rate-limiting client making more than 1000 queries in 60 seconds
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.263 615M]    LOCAL_IPV4: Automatic interface-dependent detection of address
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    LOCAL_IPV6: Automatic interface-dependent detection of address
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    BLOCK_IPV4: Automatic interface-dependent detection of address
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    BLOCK_IPV6: Automatic interface-dependent detection of address
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    SHOW_DNSSEC: Enabled, showing automatically generated DNSSEC queries
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    MOZILLA_CANARY: Enabled
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    PIHOLE_PTR: internal PTR generation enabled (pi.hole)
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    ADDR2LINE: Enabled
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.264 615M]    REPLY_WHEN_BUSY: Drop queries when the database is busy
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.265 615M]    BLOCK_TTL: 2 seconds
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.265 615M]    BLOCK_ICLOUD_PR: Enabled
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.265 615M]    CHECK_LOAD: Enabled
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.265 615M]    CHECK_SHMEM: Warning if shared-memory usage exceeds 90%
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.265 615M]    CHECK_DISK: Warning if certain disk usage exceeds 90%
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.266 615M] Finished config file parsing
Nov 03 21:25:55 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.266 615M] Creating mutex
Nov 03 21:25:56 tubzpi.xyz pihole-FTL[615]: [2023-11-03 21:25:55.266 615M
Nov 03 21:25:56 tubzpi.xyz sshd[652]: Server listening on 0.0.0.0 port 22.
Nov 03 21:25:56 tubzpi.xyz sshd[652]: Server listening on :: port 22.
Nov 03 21:25:56 tubzpi.xyz systemd[1]: Started ssh.service - OpenBSD Secure Shell server.
Nov 03 21:25:56 tubzpi.xyz unbound[651]: [651:0] warning: subnetcache: serve-expired is set but not working for data originating from the subnet module cache.
Nov 03 21:25:56 tubzpi.xyz unbound[651]: [651:0] warning: subnetcache: prefetch is set but not working for data originating from the subnet module cache.
Nov 03 21:25:56 tubzpi.xyz systemd[1]: Started lighttpd.service - Lighttpd Daemon.
Nov 03 21:25:56 tubzpi.xyz unbound[651]: [651:0] info: start of service (unbound 1.17.1).
Nov 03 21:25:56 tubzpi.xyz systemd[1]: Started unbound.service - Unbound DNS server.
Nov 03 21:25:56 tubzpi.xyz systemd[1]: Reached target nss-lookup.target - Host and Network Name Lookups.
Nov 03 21:25:57 tubzpi.xyz systemd[1]: mnt-87dd07e1\x2d5085\x2d469e\x2da372\x2df4890b3c90e0.automount: Got automount request for /mnt/87dd07e1-5085-469e-a372-f4890b3c90e0, triggered by 648 (mariadbd)
Nov 03 21:25:57 tubzpi.xyz systemd[1]: Mounting mnt-87dd07e1\x2d5085\x2d469e\x2da372\x2df4890b3c90e0.mount - /mnt/87dd07e1-5085-469e-a372-f4890b3c90e0...
Nov 03 21:25:57 tubzpi.xyz kernel: EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
Nov 03 21:25:57 tubzpi.xyz systemd[1]: Mounted mnt-87dd07e1\x2d5085\x2d469e\x2da372\x2df4890b3c90e0.mount - /mnt/87dd07e1-5085-469e-a372-f4890b3c90e0.
Nov 03 21:25:57 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:57Z INF Starting tunnel tunnelID=379ac625-c9bf-4805-b3e5-843071add765
Nov 03 21:25:57 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:57Z INF Version 2023.10.0
Nov 03 21:25:57 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:57Z INF GOOS: linux, GOVersion: go1.20.6, GoArch: arm64
Nov 03 21:25:57 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:57Z INF Settings: map[no-autoupdate:true token:*****]
Nov 03 21:25:58 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:58Z INF Generated Connector ID: ab25f50a-de51-447b-a66a-a716817d3a33
Nov 03 21:25:58 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:58Z INF cloudflared will not automatically update if installed by a package manager.
Nov 03 21:25:58 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:58Z INF Initial protocol quic
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Listening on systemd-rfkill.socket - Load/Save RF Kill Switch Status /dev/rfkill Watch.
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: Core ver 2.22
Nov 03 21:25:58 tubzpi.xyz kernel: NET: Registered PF_BLUETOOTH protocol family
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI device and connection manager initialized
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI socket layer initialized
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: L2CAP socket layer initialized
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: SCO socket layer initialized
Nov 03 21:25:58 tubzpi.xyz systemd[1]: samba-ad-dc.service: Skipped due to 'exec-condition'.
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Condition check resulted in samba-ad-dc.service - Samba AD Daemon being skipped.
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI UART driver ver 2.3
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI UART protocol H4 registered
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI UART protocol Three-wire (H5) registered
Nov 03 21:25:58 tubzpi.xyz kernel: Bluetooth: HCI UART protocol Broadcom registered
Nov 03 21:25:58 tubzpi.xyz btuart[481]: bcm43xx_init
Nov 03 21:25:58 tubzpi.xyz btuart[481]: Flash firmware /lib/firmware/brcm/BCM43430A1.hcd
Nov 03 21:25:58 tubzpi.xyz btuart[481]: Set BDADDR UART: b8:27:eb:88:90:6b
Nov 03 21:25:58 tubzpi.xyz btuart[481]: Set Controller UART speed to 921600 bit/s
Nov 03 21:25:58 tubzpi.xyz btuart[481]: Device setup complete
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Starting systemd-rfkill.service - Load/Save RF Kill Switch Status...
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Started hciuart.service - Configure Bluetooth Modems connected by UART.
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] Starting MariaDB 10.11.4-MariaDB-1~deb12u1 source revision  as process 648
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Started systemd-rfkill.service - Load/Save RF Kill Switch Status.
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Created slice system-bthelper.slice - Slice /system/bthelper.
Nov 03 21:25:58 tubzpi.xyz fail2ban-server[583]: 2023-11-03 21:25:58,476 fail2ban.configreader   [583]: WARNING 'allowipv6' not defined in 'Definition'. Using default one: 'auto'
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Starting bthelper@hci0.service - Raspberry Pi bluetooth helper...
Nov 03 21:25:58 tubzpi.xyz bthelper[703]: Raspberry Pi BDADDR already set
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Finished bthelper@hci0.service - Raspberry Pi bluetooth helper.
Nov 03 21:25:58 tubzpi.xyz systemd[1]: Starting bluetooth.service - Bluetooth service...
Nov 03 21:25:58 tubzpi.xyz (uetoothd)[713]: ConfigurationDirectory 'bluetooth' already exists but the mode is different. (File system: 755 ConfigurationDirectoryMode: 555)
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Compressed tables use zlib 1.2.13
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Number of transaction pools: 1
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Using ARMv8 crc32 instructions
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Using liburing
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Initializing buffer pool, total size = 128.000MiB, chunk size = 2.000MiB
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: Completed initialization of buffer pool
Nov 03 21:25:58 tubzpi.xyz mariadbd[648]: 2023-11-03 21:25:58 0 [Note] InnoDB: File system buffers for log disabled (block size=512 bytes)
Nov 03 21:25:59 tubzpi.xyz fail2ban-server[583]: fail2ban.server         [583]: INFO    --------------------------------------------------
Nov 03 21:25:59 tubzpi.xyz fail2ban-server[583]: fail2ban.server         [583]: INFO    Starting Fail2ban v1.0.2
Nov 03 21:25:59 tubzpi.xyz fail2ban-server[583]: fail2ban.observer       [583]: INFO    Observer start...
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: Bluetooth daemon 5.66
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Started bluetooth.service - Bluetooth service.
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Reached target bluetooth.target - Bluetooth Support.
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: Starting SDP server
Nov 03 21:25:59 tubzpi.xyz fail2ban-server[583]: fail2ban.database       [583]: INFO    Connected to fail2ban persistent database '/var/lib/fail2ban/fail2ban.sqlite3'
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: profiles/audio/vcp.c:vcp_init() D-Bus experimental not enabled
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: src/plugin.c:plugin_init() Failed to init vcp plugin
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: profiles/audio/mcp.c:mcp_init() D-Bus experimental not enabled
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: src/plugin.c:plugin_init() Failed to init mcp plugin
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: profiles/audio/bap.c:bap_init() D-Bus experimental not enabled
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: src/plugin.c:plugin_init() Failed to init bap plugin
Nov 03 21:25:59 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Creating new jail 'dropbear'
Nov 03 21:25:59 tubzpi.xyz kernel: Bluetooth: BNEP (Ethernet Emulation) ver 1.3
Nov 03 21:25:59 tubzpi.xyz kernel: Bluetooth: BNEP filters: protocol multicast
Nov 03 21:25:59 tubzpi.xyz kernel: Bluetooth: BNEP socket layer initialized
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: Bluetooth management interface 1.22 initialized
Nov 03 21:25:59 tubzpi.xyz dbus-daemon[447]: [system] Activating via systemd: service name='org.freedesktop.hostname1' unit='dbus-org.freedesktop.hostname1.service' requested by ':1.3' (uid=0 pid=713 comm="/usr/libexec/bluetooth/bluetoot
hd")
Nov 03 21:25:59 tubzpi.xyz kernel: Bluetooth: MGMT ver 1.22
Nov 03 21:25:59 tubzpi.xyz kernel: NET: Registered PF_ALG protocol family
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Starting systemd-hostnamed.service - Hostname Service...
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Started nmbd.service - Samba NMB Daemon.
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Starting smbd.service - Samba SMB Daemon...
Nov 03 21:25:59 tubzpi.xyz custom.sh[735]: /var/lib/dietpi/dietpi-autostart/custom.sh: line 5: proc/10: Is a directory
Nov 03 21:25:59 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:59Z INF ICMP proxy will use 192.168.1.183 as source for IPv4
Nov 03 21:25:59 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:59Z INF ICMP proxy will use fe80::ba27:ebff:fe22:3ac1 in zone eth0 as source for IPv6
Nov 03 21:25:59 tubzpi.xyz cloudflared[575]: 2023-11-03T21:25:59Z INF Starting metrics server on 127.0.0.1:40981/metrics
Nov 03 21:25:59 tubzpi.xyz cloudflared[575]: 2023/11/03 21:25:59 failed to sufficiently increase receive buffer size (was: 208 kiB, wanted: 2048 kiB, got: 416 kiB). See https://github.com/quic-go/quic-go/wiki/UDP-Receive-Buffer-Size for
details.
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: profiles/sap/server.c:sap_server_register() Sap driver initialization failed.
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: sap-server: Operation not permitted (1)
Nov 03 21:25:59 tubzpi.xyz bluetoothd[713]: Failed to set privacy: Rejected (0x0b)
Nov 03 21:25:59 tubzpi.xyz dbus-daemon[447]: [system] Successfully activated service 'org.freedesktop.hostname1'
Nov 03 21:25:59 tubzpi.xyz systemd[1]: Started systemd-hostnamed.service - Hostname Service.
Nov 03 21:26:00 tubzpi.xyz cloudflared[575]: 2023-11-03T21:26:00Z INF Registered tunnel connection connIndex=0 connection=b0d62f33-69fd-490a-9cd5-64790707aea6 event=0 ip=198.41.200.113 location=bru01 protocol=quic
Nov 03 21:26:00 tubzpi.xyz systemd[1]: Started cloudflared.service - cloudflared.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: 128 rollback segments are active.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: Setting file './ibtmp1' size to 12.000MiB. Physically writing the file full; Please wait ...
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: File './ibtmp1' size is now 12.000MiB.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: log sequence number 46976; transaction id 16
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: Loading buffer pool(s) from /mnt/87dd07e1-5085-469e-a372-f4890b3c90e0/dietpi_userdata/mysql/ib_buffer_pool
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] Plugin 'FEEDBACK' is disabled.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Warning] You need to use --log-bin to make --expire-logs-days or --binlog-expire-logs-seconds work.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] InnoDB: Buffer pool(s) load completed at 231103 21:26:00
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] Server socket created on IP: '127.0.0.1'.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: 2023-11-03 21:26:00 0 [Note] /usr/sbin/mariadbd: ready for connections.
Nov 03 21:26:00 tubzpi.xyz mariadbd[648]: Version: '10.11.4-MariaDB-1~deb12u1'  socket: '/run/mysqld/mysqld.sock'  port: 3306  Debian 12
Nov 03 21:26:00 tubzpi.xyz systemd[1]: Started smbd.service - Samba SMB Daemon.
Nov 03 21:26:00 tubzpi.xyz systemd[1]: Started mariadb.service - MariaDB 10.11.4 database server.
Nov 03 21:26:00 tubzpi.xyz systemd[1]: Started cron.service - Regular background program processing daemon.
Nov 03 21:26:00 tubzpi.xyz /etc/mysql/debian-start[805]: Upgrading MySQL tables if necessary.
Nov 03 21:26:00 tubzpi.xyz systemd[1]: Starting php8.2-fpm.service - The PHP 8.2 FastCGI Process Manager...
Nov 03 21:26:00 tubzpi.xyz cloudflared[575]: 2023-11-03T21:26:00Z INF Registered tunnel connection connIndex=1 connection=587566c3-e015-443e-85fe-d61c3bcdf3aa event=0 ip=198.41.192.77 location=lhr11 protocol=quic
Nov 03 21:26:00 tubzpi.xyz cron[806]: (CRON) INFO (pidfile fd = 3)
Nov 03 21:26:01 tubzpi.xyz cron[806]: (CRON) INFO (Running @reboot jobs)
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Jail 'dropbear' uses systemd {}
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Initiated 'systemd' backend
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO      maxRetry: 3
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO      findtime: 600
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: INFO      banTime: 600
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Creating new jail 'sshd'
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Jail 'sshd' uses systemd {}
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Initiated 'systemd' backend
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO      maxLines: 1
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filtersystemd  [583]: INFO    [sshd] Added journal match for: '_SYSTEMD_UNIT=sshd.service + _COMM=sshd'
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO      maxRetry: 3
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO      findtime: 600
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: INFO      banTime: 600
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filtersystemd  [583]: NOTICE  [dropbear] Jail started without 'journalmatch' set. Jail regexs will be checked against all journal entries, which is not advised for performance rea
sons.
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Jail 'dropbear' started
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filtersystemd  [583]: INFO    [sshd] Jail is in operation now (process new journal entries)
Nov 03 21:26:01 tubzpi.xyz CRON[811]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Nov 03 21:26:01 tubzpi.xyz CRON[812]: pam_unix(cron:session): session opened for user root(uid=0) by (uid=0)
Nov 03 21:26:01 tubzpi.xyz CRON[819]: (root) CMD (/usr/sbin/logrotate --state /var/lib/logrotate/pihole /etc/pihole/logrotate)
Nov 03 21:26:01 tubzpi.xyz CRON[820]: (root) CMD (   PATH="$PATH:/usr/sbin:/usr/local/bin/" pihole updatechecker reboot)
Nov 03 21:26:01 tubzpi.xyz CRON[812]: (CRON) info (No MTA installed, discarding output)
Nov 03 21:26:01 tubzpi.xyz CRON[812]: pam_unix(cron:session): session closed for user root
Nov 03 21:26:01 tubzpi.xyz cloudflared[575]: 2023-11-03T21:26:01Z INF Updated to new configuration config=null version=0
Nov 03 21:26:01 tubzpi.xyz /etc/mysql/debian-start[838]: Checking for insecure root accounts.
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.jail           [583]: INFO    Jail 'sshd' started
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: Server ready
Nov 03 21:26:01 tubzpi.xyz /etc/mysql/debian-start[842]: Triggering myisam-recover for all MyISAM tables and aria-recover for all Aria tables
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: NOTICE  [sshd] Restore Ban 180.101.88.228
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.filtersystemd  [583]: INFO    [dropbear] Jail is in operation now (process new journal entries)
Nov 03 21:26:01 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: NOTICE  [sshd] Restore Ban 218.92.0.112
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Started php8.2-fpm.service - The PHP 8.2 FastCGI Process Manager.
Nov 03 21:26:02 tubzpi.xyz cloudflared[575]: 2023-11-03T21:26:02Z INF Registered tunnel connection connIndex=2 connection=e5ae4559-659d-43cd-90d9-8272ca01435f event=0 ip=198.41.200.193 location=bru01 protocol=quic
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Starting apache2.service - The Apache HTTP Server...
Nov 03 21:26:02 tubzpi.xyz apachectl[879]: (98)Address already in use: AH00072: make_sock: could not bind to address [::]:80
Nov 03 21:26:02 tubzpi.xyz apachectl[879]: (98)Address already in use: AH00072: make_sock: could not bind to address 0.0.0.0:80
Nov 03 21:26:02 tubzpi.xyz apachectl[879]: no listening sockets available, shutting down
Nov 03 21:26:02 tubzpi.xyz apachectl[879]: AH00015: Unable to open logs
Nov 03 21:26:02 tubzpi.xyz apachectl[860]: Action 'start' failed.
Nov 03 21:26:02 tubzpi.xyz apachectl[860]: The Apache error log may have more information.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: apache2.service: Control process exited, code=exited, status=1/FAILURE
Nov 03 21:26:02 tubzpi.xyz systemd[1]: apache2.service: Failed with result 'exit-code'.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Failed to start apache2.service - The Apache HTTP Server.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Reached target multi-user.target - Multi-User System.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Reached target graphical.target - Graphical Interface.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Starting systemd-update-utmp-runlevel.service - Record Runlevel Change in UTMP...
Nov 03 21:26:02 tubzpi.xyz systemd[1]: systemd-update-utmp-runlevel.service: Deactivated successfully.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Finished systemd-update-utmp-runlevel.service - Record Runlevel Change in UTMP.
Nov 03 21:26:02 tubzpi.xyz systemd[1]: Startup finished in 6.206s (kernel) + 14.160s (userspace) = 20.367s.
Nov 03 21:26:03 tubzpi.xyz cloudflared[575]: 2023-11-03T21:26:03Z INF Registered tunnel connection connIndex=3 connection=65fa068e-3f7b-43d6-ad52-a6b4adf44b96 event=0 ip=198.41.192.107 location=lhr09 protocol=quic
Nov 03 21:26:03 tubzpi.xyz systemd[1]: systemd-rfkill.service: Deactivated successfully.
Nov 03 21:26:03 tubzpi.xyz bluetoothd[713]: src/adv_monitor.c:btd_adv_monitor_power_down() Unexpected NULL btd_adv_monitor_manager object upon power down
Nov 03 21:26:03 tubzpi.xyz bthelper[903]: Changing power off succeeded
Nov 03 21:26:03 tubzpi.xyz bthelper[711]: Changing power on succeeded
Nov 03 21:26:03 tubzpi.xyz bthelper[711]: [51B blob data]
Nov 03 21:26:22 tubzpi.xyz systemd[1]: systemd-fsckd.service: Deactivated successfully.
Nov 03 21:27:31 tubzpi.xyz systemd-timesyncd[442]: Contacted time server 85.199.214.102:123 (2.debian.pool.ntp.org).
Nov 03 21:27:31 tubzpi.xyz systemd-timesyncd[442]: Initial clock synchronization to Fri 2023-11-03 21:27:31.602108 GMT.
Nov 03 21:27:32 tubzpi.xyz systemd[1]: Stopping systemd-timesyncd.service - Network Time Synchronization...
Nov 03 21:27:32 tubzpi.xyz systemd[1]: systemd-timesyncd.service: Deactivated successfully.
Nov 03 21:27:32 tubzpi.xyz systemd[1]: Stopped systemd-timesyncd.service - Network Time Synchronization.
Nov 03 21:27:33 tubzpi.xyz sshd[916]: Accepted password for root from 95.148.15.102 port 52953 ssh2
Nov 03 21:27:33 tubzpi.xyz sshd[916]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)
Nov 03 21:27:33 tubzpi.xyz systemd[1]: Created slice user-0.slice - User Slice of UID 0.
Nov 03 21:27:33 tubzpi.xyz systemd[1]: Starting user-runtime-dir@0.service - User Runtime Directory /run/user/0...
Nov 03 21:27:33 tubzpi.xyz systemd-logind[464]: New session 3 of user root.
Nov 03 21:27:33 tubzpi.xyz systemd[1]: Finished user-runtime-dir@0.service - User Runtime Directory /run/user/0.
Nov 03 21:27:33 tubzpi.xyz systemd[1]: Starting user@0.service - User Manager for UID 0...
Nov 03 21:27:33 tubzpi.xyz (systemd)[929]: pam_unix(systemd-user:session): session opened for user root(uid=0) by (uid=0)

Tubz · 3 November 2023 21:38

Nov 03 21:27:34 tubzpi.xyz systemd[929]: Queued start job for default target default.target.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Created slice app.slice - User Application Slice.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Reached target paths.target - Paths.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Reached target timers.target - Timers.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Starting dbus.socket - D-Bus User Message Bus Socket...
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on dirmngr.socket - GnuPG network certificate management daemon.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gcr-ssh-agent.socket - GCR ssh-agent wrapper.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gnome-keyring-daemon.socket - GNOME Keyring daemon.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gpg-agent-browser.socket - GnuPG cryptographic agent and passphrase cache (access for web browsers).
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gpg-agent-extra.socket - GnuPG cryptographic agent and passphrase cache (restricted).
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gpg-agent-ssh.socket - GnuPG cryptographic agent (ssh-agent emulation).
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on gpg-agent.socket - GnuPG cryptographic agent and passphrase cache.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Listening on dbus.socket - D-Bus User Message Bus Socket.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Reached target sockets.target - Sockets.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Reached target basic.target - Basic System.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Reached target default.target - Main User Target.
Nov 03 21:27:34 tubzpi.xyz systemd[1]: Started user@0.service - User Manager for UID 0.
Nov 03 21:27:34 tubzpi.xyz systemd[929]: Startup finished in 869ms.
Nov 03 21:27:34 tubzpi.xyz systemd[1]: Started session-3.scope - Session 3 of User root.
Nov 03 21:27:34 tubzpi.xyz sshd[916]: pam_env(sshd:session): deprecated reading of user environment enabled
Nov 03 21:27:37 tubzpi.xyz systemd[1]: systemd-hostnamed.service: Deactivated successfully.
Nov 03 21:27:44 tubzpi.xyz CRON[811]: pam_unix(cron:session): session closed for user root
Nov 03 21:28:13 tubzpi.xyz sshd[1634]: Accepted password for root from 95.148.15.102 port 52441 ssh2
Nov 03 21:28:13 tubzpi.xyz sshd[1634]: pam_unix(sshd:session): session opened for user root(uid=0) by (uid=0)
Nov 03 21:28:13 tubzpi.xyz systemd-logind[464]: New session 5 of user root.
Nov 03 21:28:13 tubzpi.xyz systemd[1]: Started session-5.scope - Session 5 of User root.
Nov 03 21:28:13 tubzpi.xyz sshd[1634]: pam_env(sshd:session): deprecated reading of user environment enabled
Nov 03 21:28:17 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: NOTICE  [sshd] Unban 180.101.88.228
Nov 03 21:28:20 tubzpi.xyz sshd[916]: pam_unix(sshd:session): session closed for user root
Nov 03 21:28:20 tubzpi.xyz sshd[916]: pam_systemd(sshd:session): Failed to release session: Interrupted system call
Nov 03 21:28:20 tubzpi.xyz systemd[1]: session-3.scope: Deactivated successfully.
Nov 03 21:28:20 tubzpi.xyz systemd-logind[464]: Session 3 logged out. Waiting for processes to exit.
Nov 03 21:28:20 tubzpi.xyz systemd-logind[464]: Removed session 3.
Nov 03 21:28:21 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: NOTICE  [sshd] Unban 218.92.0.112
Nov 03 21:28:44 tubzpi.xyz sshd[1667]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=218.92.0.31  user=root
Nov 03 21:28:46 tubzpi.xyz sshd[1667]: Failed password for root from 218.92.0.31 port 11592 ssh2
Nov 03 21:28:46 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO    [sshd] Found 218.92.0.31 - 2023-11-03 21:28:46
Nov 03 21:28:49 tubzpi.xyz sshd[1667]: Failed password for root from 218.92.0.31 port 11592 ssh2
Nov 03 21:28:50 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO    [sshd] Found 218.92.0.31 - 2023-11-03 21:28:49
Nov 03 21:28:53 tubzpi.xyz sshd[1667]: Failed password for root from 218.92.0.31 port 11592 ssh2
Nov 03 21:28:53 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO    [sshd] Found 218.92.0.31 - 2023-11-03 21:28:53
Nov 03 21:28:53 tubzpi.xyz fail2ban-server[583]: fail2ban.actions        [583]: NOTICE  [sshd] Ban 218.92.0.31
Nov 03 21:28:55 tubzpi.xyz sshd[1669]: Invalid user debian from 117.203.161.194 port 35288
Nov 03 21:28:55 tubzpi.xyz sshd[1669]: pam_unix(sshd:auth): check pass; user unknown
Nov 03 21:28:55 tubzpi.xyz sshd[1669]: pam_unix(sshd:auth): authentication failure; logname= uid=0 euid=0 tty=ssh ruser= rhost=117.203.161.194
Nov 03 21:28:55 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO    [sshd] Found 117.203.161.194 - 2023-11-03 21:28:55
Nov 03 21:28:56 tubzpi.xyz sshd[1669]: Failed password for invalid user debian from 117.203.161.194 port 35288 ssh2
Nov 03 21:28:57 tubzpi.xyz fail2ban-server[583]: fail2ban.filter         [583]: INFO    [sshd] Found 117.203.161.194 - 2023-11-03 21:28:56
Nov 03 21:28:58 tubzpi.xyz sshd[1669]: Connection closed by invalid user debian 117.203.161.194 port 35288 [preauth]
Nov 03 21:29:00 tubzpi.xyz sshd[1667]: Received disconnect from 218.92.0.31 port 11592:11:  [preauth]
Nov 03 21:29:00 tubzpi.xyz sshd[1667]: Disconnected from authenticating user root 218.92.0.31 port 11592 [preauth]
Nov 03 21:29:00 tubzpi.xyz sshd[1667]: PAM 2 more authentication failures; logname= uid=0 euid=0 tty=ssh ruser= rhost=218.92.0.31  user=root

Also, I’m stupid and transferred the rootfs to an SD card without researching what rootfs is, so erm i have to insert the SD card when I see the SSD light flash, as fast as possible for it to actually boot. And it wants me to format the partitions on the SSD, so I can’t transfer it back, just an FYI. Furthermore, might be related but when I power cycle, it doesn’t boot the first time but, when I power cycle again it boots.

Tubz · 3 November 2023 21:48

Completly forgot to put it in the code thing

MichaIng · 3 November 2023 22:08

Upload such better as text files, or at least wrap it into code tags, otherwise it is very difficult to read and to scroll .

So this was now a successful boot. Interesting would be of course the logs of the following shutdown or in case following boot after a reboot.

Also, I’m stupid and transferred the rootfs to an SD card without researching what rootfs is, so erm i have to insert the SD card when I see the SSD light flash, as fast as possible for it to actually boot. And it wants me to format the partitions on the SSD, so I can’t transfer it back, just an FYI.

Was that in attempt to solve the issue? Otherwise it sounds pretty much like a good reason for the issue. ~~I would try to manually move back the root filesystem to the USB drive. Try this:~~
EDIT: Wait, actually it should be easily possible via dietpi-drive_manager. When you select /dev/sda2 and “Transfer RootFS” there, it asks you to format only the partition, not the whole drive, isn’t it? Otherwise, you could do it manually:

dietpi-services stop
mount -o remount,ro /

The second command should mount the rootfs read-only. If this fails, a swap file might be the reason, or some other services:

swapoff -a
mount -o remount,ro /

Once it worked, you should be able to do something like this, to copy the files back. But please assure that the device names are really correct, and that the old root filesystem does not contain anything required anymore. Check the names e.g. via lsblk

mkdir /mnt/sd_rootfs /mnt/usb_rootfs
mount /dev/mmcblk0p2 /mnt/sd_rootfs
mount /dev/sda2 /mnt/usb_rootfs
cp -a rsync -aHv --delete /mnt/sd_rootfs/ /mnt/usb_rootfs/

Then you need to adjust the UUID entries:

usb_partuuid=$(lsblk -no PARTUUID /dev/sda2)
echo "$usb_partuuid" # assure this is something similar to "9f102456-02"
sed -i "s/root=[^[:blank:]]*/root=PARTUUID=$usb_partuuid/" /boot/cmdline.txt
sed -i "\@[[:blank:]]/[[:blank:]]@cPARTUUID=$usb_partuuid / ext4 noatime,lazytime,rw 0 1" /mnt/usb_rootfs/etc/fstab