I’m recently playing with my Radxa O6n and it got a good performance!
eneric Device (aarch64) | IP: 192.168.1.217
┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐
│ DietPi-Benchmark | https://dietpi.com/survey#benchmark : │
│ - CPU Performance : Duration = 0.93 seconds (lower is faster) │
│ - CPU Temp : Idle = 36'c | Full load = 49'c │
│ - RootFS : Write = 29 MB/s | Read = 776 MB/s │
│ - RAM : Write = 2358 MB/s | Read = 4115 MB/s │
│ │
│ Additional benchmarks: │
│ - Custom Filesystem : Write = Not tested MB/s | Read = Not tested MB/s │
│ - Network LAN : Transfer rate = Not tested MB/s │
│ │
│ ●─ DietPi-Benchmark ------------------------------------ │
│ DietPi-Benchmark : Starts CPU, RAM and IO benchmark suite. Scores can be │
│ ●─ Additional benchmarks ------------------------------- │
│ Custom Filesystem : Benchmark IO performance from a selection of mounted d │
│ Network LAN : Benchmark LAN performance using 2 DietPi systems. │
│ │
│ │
│ <Select> <Back> │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
however, thing get strange when I’m using putty for serial connection, it randomly freeze the terminal and crash into some kind of loop. keyboard input and display are fine before loading up the kernel and go into dietpi itself.
The problem doesn’t exist in official image and in network ssh session.
Does the dietpi installation script touched on the serial-console?