New user of dietpi on my RPi 3 Model B (armv7l), I wanted to thank this community, for the support it provides.
I just installed the latest release, and all work fine !! (thanks to the different topic).
I spent a lot of time trying to get my raspberryPi optimally configured, and itās finally working, but I still have a lot of things to discover.
So thank you all, and surely see you soon, because I know myself Iām a specialist to break the Os that work very well normally.
Big up for this Highly optimised minimal Debian OS
PS: this message was translate by deepl, beacause my english is not perfectā¦sorry for that !
I recommend to make a backup of your running and working system with dietpi-backup (to an external drive). In the case you break something you can just restore the whole system.
Happy experimenting!
I have an external SSD connected to the raspberrypi on which I moved rootfs and boot to save my sd card.
Iām going to try to make a backup now, but I donāt know yet where to store it so itās easily accessible.
Iām going to check the topic related to dietpi-backupā¦not sure that I can manage without help.
thx
Why not booting of the SSD completely? This way you can remove SD card fully. Btw, you should use a self-powered SSD and not relay on the USB port of Raspberry Pi.
I discovered dietpi more than a year ago and since then Iāve been doing everything with it on a pi zero that I use as a small apache/mosquitto/node red server and others and itās really great for learning and tinkering.
Iāve been using it for a while now as a small apache/mosquitto/node red server and itās really great to learn and work on. Make backups of your card but also backups of your system on your card with dietpi backup to be able to experiment with software stuff and easily go back.
yes I saw that it was better to have a self powered ssd, but I didnāt have that at hand when I decided to install dietpi.
Thanks a lot for the advice, Iāll see how I can auto-power my SSDā¦Iām often not very quick to decideā¦if you want I can make you a picture of my strange setup (I know)ā¦and tell me what you think?
thx
Itās a recommendation from our end as we had a couple of users who run into voltage issues. Especially on RPi4 device. It might goanna work but something to keep in mind if thinks happen
Hello @ Black_Dynamit3 and thank you .
Yes, I think Iām going to make a backup soonā¦after talking about it and not having done it yet, something strange is going to happenā¦
ā¦yes Iām often used to tinkeringā¦and getting stuck, and having to start all over again ā¦Iām used to it as I often install Os such as Arium on my laptop ā¦and often everything doesnāt work out very well
ā¦a bit too late for the backup, my external SSD crashed, I had to do a complete reinstall ā¦ for now keeps, I will have to order a power supply Inateck USB 3.0 to SATA Hard Disk Adapter for 2.5 ā/ 3.5ā SATA HDD / SSD converter with external power supply for + reliability . Hereās the latest news for now, itās up and running!
Glad to have found this forum, thanks for everything - - (Iāll try to run like this for now, and do the minimum installation.)
ā¦yes Iām often used to tinkeringā¦and getting stuck, and having to start all over again ā¦Iām used to it as I often install Os such as Arium on my laptop ā¦and often everything doesnāt work out very well