Is this a hardware issue?

I keep getting these messages on my Orange Pi Zero 2W, and the terminal get completely stuck. I downloaded the latest dietpi but the issue persists.

[ OK ] DietPi-Update | Checking IPv4 network connectivity
[ OK ] DietPi-Update | Checking DNS resolver
[ OK ] DietPi-TimeSync | systemctl stop systemd-timesyncd
[ OK ] DietPi-TimeSync | mkdir -p /run/systemd/timesync
[ INFO ] DietPi-Update | Getting latest version from: https://raw.githubusercontent.com/MichaIng/DietPi/master/.update/ver
[ OK ] DietPi-Update | Got valid latest version: 10.3.3
[ OK ] DietPi-Update | eval echo 1 > /boot/dietpi/.install_stage
[ OK ] DietPi-Update | No update required, your DietPi installation is already up to date:
[ INFO ] DietPi-Update | Current version : v10.3.3
[ INFO ] DietPi-Update | Latest version  : v10.3.3
[ INFO ] DietPi-Update | Checking for new available live patches
[ OK ] DietPi-Update | Added setting G_LIVE_PATCH_STATUS[2]=‘not applied’ to end of file /boot/dietpi/.version
[ INFO ] DietPi-Update | Applying live patch 2: Fix fresh Docker installation via dietpi-software
[ OK ] DietPi-Update | Setting in /boot/dietpi/.version adjusted: G_LIVE_PATCH_STATUS[2]=‘applied’
[ INFO ] DietPi-Update | APT update, please wait…
Get:1 https://dietpi.com/apt trixie InRelease [2140 B]
Get:2 https://dietpi.com/apt all InRelease [31.8 kB]
Get:3 https://dietpi.com/apt trixie/main arm64 Packages [4868 B]
Get:4 https://dietpi.com/apt all/orangepizero2w all Packages [572 B]
Get:5 https://dietpi.com/apt all/orangepizero2w arm64 Packages [4524 B]
Get:6 https://deb.debian.org/debian trixie InRelease [140 kB]
Get:7 https://deb.debian.org/debian trixie-updates InRelease [47.3 kB]
Get:8 https://deb.debian.org/debian-security trixie-security InRelease [43.4 kB]
Get:9 https://deb.debian.org/debian trixie-backports InRelease [54.0 kB]
Get:10 https://deb.debian.org/debian trixie/non-free arm64 Packages [74.4 kB]
Get:11 https://deb.debian.org/debian trixie/main arm64 Packages [9607 kB]
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: #2-…!: (1 GPs behind) idle=c074/1/0x4000000000000000 softirq=5526/5527 fqs=56
rcu: #3-…!: (0 ticks this GP) idle=f504/1/0x4000000000000000 softirq=5280/5280 fqs=56
rcu: #(detected by 0, t=5256 jiffies, g=10689, q=10 ncpus=4)
rcu: rcu_preempt kthread wakeup delayed for 4074 jiffies! g10689 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402
rcu: #Possible timer handling issue on cpu=1 timer-softirq=2443
rcu: rcu_preempt kthread starved for 4075 jiffies! g10689 f0x0 RCU_GP_WAIT_FQS(5) ->state=0x402 ->cpu=1
rcu: #Unless rcu_preempt kthread gets sufficient CPU time, OOM is now expected behavior.
rcu: RCU grace-period kthread stack dump:
rcu: Stack dump where RCU GP kthread last ran:
Ign:11 https://deb.debian.org/debian trixie/main arm64 Packages
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 51s!
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 81s!
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: #2-…!: (1 GPs behind) idle=c074/1/0x4000000000000000 softirq=5526/5527 fqs=1704
rcu: #3-…!: (0 ticks this GP) idle=f504/1/0x4000000000000000 softirq=5280/5280 fqs=1704
rcu: #(detected by 0, t=21012 jiffies, g=10689, q=82 ncpus=4)
Ign:12 https://deb.debian.org/debian trixie/non-free-firmware arm64 Packages
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 112s!
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 142s!
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: #2-…!: (1 GPs behind) idle=c074/1/0x4000000000000000 softirq=5526/5527 fqs=3854
rcu: #3-…!: (0 ticks this GP) idle=f504/1/0x4000000000000000 softirq=5280/5280 fqs=3854
rcu: #(detected by 0, t=36770 jiffies, g=10689, q=127 ncpus=4)
Ign:13 https://deb.debian.org/debian trixie/contrib arm64 Packages
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 173s!
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 204s!
Ign:14 https://deb.debian.org/debian trixie-updates/main arm64 Packages
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: #2-…!: (1 GPs behind) idle=c074/1/0x4000000000000000 softirq=5526/5527 fqs=6004
rcu: #3-…!: (0 ticks this GP) idle=f504/1/0x4000000000000000 softirq=5280/5280 fqs=6004
rcu: #(detected by 0, t=52529 jiffies, g=10689, q=181 ncpus=4)
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 235s!
Ign:15 https://deb.debian.org/debian-security trixie-security/main arm64 Packages
BUG: workqueue lockup - pool cpus=0-3 node=0 flags=0x4 nice=-20 stuck for 265s!
rcu: INFO: rcu_preempt detected stalls on CPUs/tasks:
rcu: #2-…!: (1 GPs behind) idle=c074/1/0x4000000000000000 softirq=5526/5527 fqs=8154
rcu: #3-…!: (0 ticks this GP) idle=f504/1/0x4000000000000000 softirq=5280/5280 fqs=8154
rcu: #(detected by 0, t=68288 jiffies, g=10689, q=257 ncpus=4)

could be some thermal issue if the CPU is running hot or power supply instability.