Clean install errors Topic is solved

Having issues with your DietPi installation or found a bug? Post it here.
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Clean install errors

Post by DutchFlash »

Hello all,

Been fiddling with this problem for days.
I have a problem with my raspberry pi 4 2 GB.
I install a clean image of dietpi (31-03-2021) on a usb ssd, I connect it to the raspberry pi and then boot.
(Also get these errors when I boot from sd)
After a few seconds I get errors.
Have already downloaded the image(DietPi_RPi-ARMv6-Buster) several times.
Tried several utp cables but don't work.
It seems as if I am not getting an ip number.
Last week everything still worked.
20210410_114328.jpg
I press enter and login, then I see the following
20210410_112308[1].jpg
Don't understand anything at all anymore .

Who can help me so that I can use my raspberry again .


Greetings DutchFlash (Dutch,Newbie)
User avatar
Joulinar
Posts: 4536
Joined: Sat Nov 16, 2019 12:49 am

Re: Clean install errors

Post by Joulinar »

Hi,

can you try to disable IPv6. as well pls can you share ip a
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Re: Clean install errors

Post by DutchFlash »

Hi Joulinar,

disable IPv6 = is off now.

ip a
20210410_132228.jpg
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Re: Clean install errors

Post by DutchFlash »

Suddenly it works again !!

I'm going crazy, :?

I format the ssd and burn dietpi on it again. Plug the usb cable back into rpi4 (usb 3 port) and it suddenly works again.
(There is no sd card in de rpi4)
I have been doing this exactly the same for 3 days, and I kept getting an error installing.
Tried several times on different SSD´s and SD cards.
So just get an IP number again, so now i can log in to Rpi4 through (ssh)laptop again.
And now it suddenly works again, I don't understand anything at all anymore.


Greetings, DutchFlash
User avatar
Joulinar
Posts: 4536
Joined: Sat Nov 16, 2019 12:49 am

Re: Clean install errors

Post by Joulinar »

well strange. Maybe an issue with the Ethernet cable? But good it is working now
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Re: Clean install errors

Post by DutchFlash »

I don't know if it was the ethernet cable.(Tried 3 different ones )


Now have another problem, when I connect a second ssd to my rpi4. On the second usb3 port, I get an error message again.

20210410_151424.jpg

If I connect it to a usb2 port, it will just work.?
User avatar
Joulinar
Posts: 4536
Joined: Sat Nov 16, 2019 12:49 am

Re: Clean install errors

Post by Joulinar »

Just give it a try. As well you need to ensure to have both SSD externally powered
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Re: Clean install errors

Post by DutchFlash »

I don't have that option.

I am using this cable. SSD is in a 2.5 case.
Goobay_USB_A_naar_Micro_USB_kabel_ _5_meter_ _USB_3.0.jpg
User avatar
Joulinar
Posts: 4536
Joined: Sat Nov 16, 2019 12:49 am

Re: Clean install errors

Post by Joulinar »

well it might not be enough power if your connect 2 SSD. You could verify kernel messages dmesg -l err,crit,alert,emerg
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
User avatar
DutchFlash
Posts: 29
Joined: Tue Jun 12, 2018 2:31 pm
Location: Netherlands(Rotterdam)

Re: Clean install errors

Post by DutchFlash »

Don't get a notification, or am i doing something wrong.

root@Rpi4:~# dmesg -l err,crit,alert,emerg
root@Rpi4:~#

The Rpi4 is a few months old, with original Rpi4 power supply
Post Reply