UPS auto shutdown

Have some feedback, questions, suggestions, or just fancy a chat? Pop it in here.
Post Reply
threefoursixeight
Posts: 17
Joined: Wed Oct 30, 2019 3:55 am

UPS auto shutdown

Post by threefoursixeight »

Hello everyone,

I’m interested in getting a UPS for my pi media server to use in the case of a power outage.

I’ve read that for APC model UPS’s that there is the apcupsd tool that allows the UPS to signal the computer via USB that power has been lost and tell the computer to shutdown gracefully.

I was wondering if anyone has any experience using apcupsd or similar software with dietpi?

This would be with a raspberry pi 4.

Thank you!
User avatar
WarHawk
Posts: 610
Joined: Thu Jul 20, 2017 8:55 am

Re: UPS auto shutdown

Post by WarHawk »

Check out NUT

The primary goal of the Network UPS Tools (NUT) project is to provide support for Power Devices, such as Uninterruptible Power Supplies, Power Distribution Units, Automatic Transfer Switch, Power Supply Units and Solar Controllers.

NUT provides many control and monitoring features, with a uniform control and management interface.

More than 140 different manufacturers, and several thousands models are compatible.

This software is the combined effort of many individuals and companies.
Torvald
Posts: 5
Joined: Sun Dec 09, 2018 6:30 pm

Re: UPS auto shutdown

Post by Torvald »

See this article on how to use a NUT.
User avatar
Phillski
Posts: 35
Joined: Fri Feb 02, 2018 10:52 am

Re: UPS auto shutdown

Post by Phillski »

I used the following guide to configure NUT on my NanoPI NEO4.

https://mn3m.info/posts/configure-ups-m ... on-debian/
Butz
Posts: 1
Joined: Tue Nov 19, 2019 10:33 am

Re: UPS auto shutdown

Post by Butz »

No issues at all after following that guide, Phillski?
Post Reply