dmesg warning: snd-allo-boss-dac soc:sound: snd_soc_register_card()

Having issues with your DietPi installation, or, found a bug? Post it here.
Post Reply
notherNewbie
Posts: 7
Joined: Mon Nov 05, 2018 1:45 pm

dmesg warning: snd-allo-boss-dac soc:sound: snd_soc_register_card()

Post by notherNewbie »

Hi,

I have a few performance issues (poor connectivity with android devices via squeezer and spotify via LMS's spotty) that I'm trying to troubleshoot on my RPi. I saw these warnings both before (6.16) and after the latest update to 6.17.12, though there were additional warnings in 6.16.

Do I need to be concerned?

Code: Select all

[  +0.505007] snd-allo-boss-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[  +0.000021] snd-allo-boss-dac soc:sound: snd_soc_register_card() failed: -517
[  +0.260543] snd-allo-boss-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[  +0.000020] snd-allo-boss-dac soc:sound: snd_soc_register_card() failed: -517
[  +0.000732] brcmfmac: F1 signature read @0x18000000=0x1541a9a6
[  +0.005902] brcmfmac: brcmf_fw_map_chip_to_name: using brcm/brcmfmac43430-sdio.bin for chip 0x00a9a6(43430) rev 0x000001
[  +0.000242] usbcore: registered new interface driver brcmfmac
[  +0.000550] snd-allo-boss-dac soc:sound: ASoC: CODEC DAI pcm512x-hifi not registered - will retry
[  +0.000026] snd-allo-boss-dac soc:sound: snd_soc_register_card() failed: -517
[  +0.005481] pcm512x 1-004d: 1-004d supply AVDD not found, using dummy regulator

[  +0.000069] pcm512x 1-004d: 1-004d supply DVDD not found, using dummy regulator
[  +0.000079] pcm512x 1-004d: 1-004d supply CPVDD not found, using dummy regulator
[  +0.117695] snd-allo-boss-dac soc:sound: pcm512x-hifi <-> 3f203000.i2s mapping ok
[  +0.194183] brcmfmac: brcmf_c_preinit_dcmds: Firmware version = wl0: Oct 23 2017 03:55:53 version 7.45.98.38 (r674442 CY) FWID 01-e58d219f
[  +0.000748] brcmfmac: brcmf_c_preinit_dcmds: CLM version = API: 12.2 Data: 7.11.15 Compiler: 1.24.2 ClmImport: 1.24.1 Creation: 2014-05-26 10:53:55 Inc Data: 9.10.39 Inc Compiler: 1.29.4 Inc ClmImport: 1.36.3 Creation: 2017-10-23 03:47:14 
[  +0.236092] brcmfmac: power management disabled
[  +0.417296] IPv6: ADDRCONF(NETDEV_UP): wlan0: link is not ready
[  +0.000132] brcmfmac: power management disabled
[  +0.925001] IPv6: ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready
Thanks.

NN
Post Reply