[Answered] Remot3.it/Weaved

Have some feedback, questions, suggestions, or just fancy a chat? Pop it in here.
Post Reply
bin4ry
Posts: 8
Joined: Wed Oct 03, 2018 11:10 am

[Answered] Remot3.it/Weaved

Post by bin4ry »

Hi guys,

Did Remot3.it got removed from the list of software available ?

I've been unable to locate it on the latest release 6.16... If this is the case could you point me to a worthy alternative?

Many thanks for your help!! Also I would to thank the DietPI dev's for their AMAZING work!! :)
User avatar
MichaIng
Site Admin
Posts: 2295
Joined: Sat Nov 18, 2017 6:21 pm

Re: Remot3.it/Weaved

Post by MichaIng »

Code: Select all

2018-10-03 13:18:00 root@micha:/var/log# dietpi-software list | grep remot3.it
id 68 | =0 | remot3.it: (weaved) access your device over the internet | | https://dietpi.com/phpbb/viewtopic.php?f=8&t=5&start=20#p188
Category 10 (Remote Access), software ID 68.

You can also install it via dietpi-software install 68, and at best reboot manually afterwards ;).

Note it is only available on ARMv6+7, not ARMv8 or x86, if this might be the reason?
bin4ry
Posts: 8
Joined: Wed Oct 03, 2018 11:10 am

Re: Remot3.it/Weaved

Post by bin4ry »

That explains it ! I was trying to get it on a rock64 board...
User avatar
MichaIng
Site Admin
Posts: 2295
Joined: Sat Nov 18, 2017 6:21 pm

Re: Remot3.it/Weaved

Post by MichaIng »

Actually x86_64 package is available: https://github.com/remoteit/installer/t ... 1.3-07_x86

But you need arm64 :?.
For now I can't find a version you would need. Keeping eyes open.
Post Reply