Having issues with your DietPi installation or found a bug? Post it here.
- Posts: 1
- Joined: Fri Jan 19, 2018 11:59 am
I have DietPi on Tinkerboard with nextcloudpi installed. by default nextcloudpi is using btrfs, but it seems is not being suported/enabled module :
Code: Select all
Disk /dev/sda: 349.3 GiB, 375049420800 bytes, 732518400 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: gpt
Disk identifier: 19CBAFA4-304A-4523-9711-5CC05E3B8C4E
Device Start End Sectors Size Type
/dev/sda1 2048 732516351 732514304 349.3G Linux filesystem
Command (m for help):
Code: Select all
root@tinkerboard:~# mount /dev/sda1 /media/USBdrive
mount: unknown filesystem type 'btrfs'
Module Size Used by
8723bs 1232896 0
root@tinkerboard:~# modprobe btrfs
modprobe: FATAL: Module btrfs not found in directory /lib/modules/4.4.71+
- Posts: 416
- Joined: Sun Feb 28, 2016 5:28 pm
miodzicho wrote:I have DietPi on Tinkerboard with nextcloudpi installed.
, a ready to use NextCloud image for Raspberry Pi
If you have a Raspberry Pi, you have BTRFS support kernel build-in.
So I think, you have a Tinker Board with running NextCloud.
has not BTRFS support build-in.
But there is a unoffical custom image without support, which has preemptive kernel with ondemand performance governor, RAID support, reiserfs, btrfs, ntfs, fat32, cifs, autofs4, but no wifi.
If you find our project or support useful, then we’d really appreciate it if you’d consider contributing to the project however you can.
Donating is the easiest – you can use PayPal and Bitcoin.