Code: Select all
root@Odroid:~# apt-get dist-upgrade Reading package lists... Done Building dependency tree Reading state information... Done Calculating upgrade... The following package was automatically installed and is no longer required: linux-image-4.9.60+ Use 'apt-get autoremove' to remove it. Done 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. 2 not fully installed or removed. After this operation, 0 B of additional disk space will be used. Do you want to continue? [Y/n] y Setting up linux-image-4.9.61+ (4.9.61-20171118-XU3) ... Running depmod. Examining /etc/kernel/postinst.d. run-parts: executing /etc/kernel/postinst.d/apt-auto-removal 4.9.61+ /boot/vmlinuz-4.9.61+ run-parts: executing /etc/kernel/postinst.d/copy_dtb 4.9.61+ /boot/vmlinuz-4.9.61+ run-parts: executing /etc/kernel/postinst.d/initramfs-tools 4.9.61+ /boot/vmlinuz-4.9.61+ update-initramfs: Generating /boot/initrd.img-4.9.61+ Image Name: uInitrd Created: Sun Nov 19 18:25:07 2017 Image Type: ARM Linux RAMDisk Image (uncompressed) Data Size: 6492418 Bytes = 6340.25 kB = 6.19 MB Load Address: 00000000 Entry Point: 00000000 gzip: stdout: No space left on device E: mkinitramfs failure cpio 141 gzip 1 update-initramfs: failed for /boot/initrd.img-4.9.61+ with 1. run-parts: /etc/kernel/postinst.d/initramfs-tools exited with return code 1 Failed to process /etc/kernel/postinst.d at /var/lib/dpkg/info/linux-image-4.9.61+.postinst line 391. dpkg: error processing package linux-image-4.9.61+ (--configure): subprocess installed post-installation script returned error exit status 2 dpkg: dependency problems prevent configuration of linux-image-4.9-armhf-odroid-xu3: linux-image-4.9-armhf-odroid-xu3 depends on linux-image-4.9.61+; however: Package linux-image-4.9.61+ is not configured yet. dpkg: error processing package linux-image-4.9-armhf-odroid-xu3 (--configure): dependency problems - leaving unconfigured Errors were encountered while processing: linux-image-4.9.61+ linux-image-4.9-armhf-odroid-xu3 E: Sub-process /usr/bin/dpkg returned an error code (1)
I note the gzip error but I have plenty of room on the system unless it is referring to the ramdisk?