I'm running the Orange Pi Plus 2E with current DietPi. I have followed the instructions for copying a fresh install of DietPi to the eMMC, which works... But I would like to be able to copy the currently running SD over to eMMC in its entirety (like ARMbian with the nand scripts), as I have five Pis that I would like to clone (complex setup and files).
I'm sure this is simple, but I'm not sure how to make it happen.
Have some feedback, questions, suggestions, or just fancy a chat? Pop it in here.
4 posts • Page 1 of 1
Here are the instructions I followed to copy the fresh install to eMMC. How should I modify the source to copy the entire SD installation to eMMC?
Code: Select all
#7Zip prereqs apt-get install -y p7zip wget 'http://dietpi.com/downloads/images/DietPi_OrangePiPlus-armv7-(Jessie).7z' -O image.7z p7zip -d image.7z #Write to EMMC # - Following assumes you have no other files in this directory with name 'DietPi_v*.img' # (other than the one we downloaded above) dd if="$(ls | grep -m1 'DietPi_v'*'.img')" of=/dev/mmcblk1 #Power off, unplug SD card, power on.