4.9 xu4

[phaseshifter]

if i download from the xu4 page am i getting the 4.9 kernel image

[johnvick]

Test image here:

https://github.com/Fourdee/DietPi/issues/926

I haven't tried it - if you do please report back here on how it goes.

[phaseshifter]

well very interesting as i have it running on an xu3-lite and 4 cores report 1300 and four cores report 2000 ...VERY NICE.....

other than that still early stages 4 me but up and running...

[phaseshifter]

hmm green led does not function at all......

will try cloudshell...not shure if it has support for the shell-II or not but will hook up cs-1 and test..

[phaseshifter]

xu3-lite cloudshell-I hardware and diet shell software enabled ...
program works as planned..but a few mistakes in the mix....

l.c.d screen has backlite only ..
stats come on via hdmi ....
software needs to auto-mount drive..i.e drive is not seen ..
i am not shure how to mount it manually and or automunt required..

[phaseshifter]

xu4 and c-shel-II

running the chip i flashed for the xu3
.... the shell-II ....

backlight only..nothing on screen of shell-II

software needs tending too...
stats on hdmi ....

will flash xu4 image on a chip

oh cpu stats report 4 cores at 1300 and 4 cores at 2000 prolly cause the xu3 is configured ..i guess..funny though it pulledt the cores down...cannot check manually can only go by shell stats program

[phaseshifter]

odroid now has support of xu4 ram speeds up to 933Mhz could you add this to your software as an adjustment..

i have had my xu3-lite running ram@ 933 Mhz for about a week with no problems thus far

[phaseshifter]

xu3 lite and cloudshell -1..

i find this rather odd when i have diet-pi-cloudshell running i can get the backlite to come on ,,,when i run odroid-ubuntu i cannot get anything to ignite thus ..my question is this

::could you pls tell me the files that the diet-cloudshell program has modded..and or the concerning files/dir`s i would like to see what the difference is between c-shel-diet and odroid ubuntu
i guess i may have an early revision xu3-lite to start with ..dunno....

thanks..phase...

[phaseshifter]

now using xu4 and 4.9 kernel and cloudshell II

seems that on the xu4 it is setting the 4 cores at 1300 when they should be 1500..

mouse is flickering dont know why...

mate desktop works fine atm

[johnvick]

Thanks for this feedback I am keen try try this once stable as I have had a few disasters trying it on my own so far. My main hope is that it will improve 1080p video playback and transcoding with emby - is this something you'll be trying out?

John