Any images that will work on an MiQi board?

Have some feedback, questions, suggestions, or just fancy a chat? Pop it in here.
Post Reply
User avatar
Posts: 8
Joined: Sat May 30, 2020 5:32 pm

Any images that will work on an MiQi board?

Post by jayjr1105 »

I have a rare MiQi board that is very similar to the Tinkerboard with an RK3288 chip. Will the tinkerboard image work on this?

Processor — Rockchip RK3288 (4x Cortex-A17 cores @ 1.8GHz); Mali-T764 GPU
Memory — 1GB or 2GB DDR3; 8GB or 32GB eMMC; microSD slot
Display — HDMI 2.0 port
Networking — Gigabit Ethernet port

Currently I'm running from SD card using maskrom because I can't for the life of me clear the eMMC using rkdeveloptools or anything.
User avatar
Posts: 5958
Joined: Sat Nov 16, 2019 12:49 am

Re: Any images that will work on an MiQi board?

Post by Joulinar »


many thanks for your request. Well as you said, your board is not that common. Therefore it's hard to say if DietPi will work. Basically you would have 2 options.
  1. try the tinkerboard image and check if it is working
  2. try running latest Armbian image and execute DietPi install script afterwords
    1. Armbian Image:
    2. DietPi install script:
It might happen that your board is not fully detected and some functions are not working because some functions will need a known device ID. But we will see once you tried one of the two options :D
Pls let us know if a solution is working. This could help others if they hit by similar situation. Your DietPi Team
Post Reply