Page 11 of 14

v148

Posted: Sat Apr 01, 2017 2:01 pm
by Fourdee
IceCast:
Shoutcast streaming server, includes DarkIce for audio input (eg: mic).
icecast.png
Install notes:
  • DietPi will attempt to detect mic input during installation, and apply to DarkIce. If a mic was not available, or you experience issue, check available mics with:

    Code: Select all

    arecord -l
    • Then edit the device entry in /etc/darkice.cfg, or
    • Simple copy and paste:

      Code: Select all

      sed -i "/^device[[:space:]]/c\device = hw:$(arecord -l | grep -m1 'card' | awk '{print $2}' | sed 's/://'),0" /etc/darkice.cfg
    • Restart services

      Code: Select all

      dietpi-services restart
  • We created a SystemD service for DarkIce, DietPi will automatically start this:
    systemctl status darkice -l
Access IceCast Web Interface:
  • url = http://192.168.0.100:8000
  • source password = dietpi
  • relay password = dietpi
  • admin password = randomly generated, use code below to view:

    Code: Select all

    cat /etc/icecast2/icecast.xml | grep admin-password
Access Recording File:
This is disabled by default.
  • A recording of the stream can be enabled by editing /etc/darkice.cfg, then un-commenting localDumpFile = /mnt/dietpi_userdata/darkice_recording.ogg
  • Restart services:

    Code: Select all

    dietpi-services restart
  • A recording will then be saved in the following location:

    Code: Select all

    /mnt/dietpi_userdata/darkice_recording.ogg

>> Return to DietPi-Software List

v148

Posted: Mon Apr 03, 2017 12:31 pm
by Fourdee
MotionEye:
Web interface and surveillance for your RPi/USB camera. Mainly focused towards motion detection usage.

NB: Image has been pixelated:
motioneye.png
Access Web Interface: Access recordings (w/o web interface): >> Return to DietPi-Software List

v148

Posted: Tue Apr 04, 2017 3:28 pm
by Fourdee
CloudPrint:
CUPS print server, with support for Google cloud printing. Also includes a web interface for CUPS, allowing easy setup of printers.
cups.png
Access Web Interface: Add Printer:
Once in the CUPS web interface, you can add and configure printers by selecting
  • Home > Adding Printers and Classes
Enable CloudPrint:
Once the printer is setup:
  • Run the following command to enable Google Cloud Print authentication on this device:

    Code: Select all

    cps-auth
  • A URL will be generated. Use the URL link in a web-browser to complete authentication
  • Restart services

    Code: Select all

    dietpi-services restart
  • If you experience issues, you can check the status of the CloudPrint service for info with:

    Code: Select all

    systemctl status cloudprintd -l
Print >> Return to DietPi-Software List

v149

Posted: Sun Apr 09, 2017 12:24 pm
by Fourdee
VirtualHere:
Share physically attached USB devices from your SBC, over the network, to other systems. Awesome!
virtualhere.png
Download Client:
Download the client for your PC: USB Storage WARNING:
As per: https://github.com/Fourdee/DietPi/issue ... -292781475
It it highly recommended, you do not install VirtualHere, if your DietPi user data is stored on a USB drive.

VirtualHere does not take into account mounted drives when selecting them for remote use. This is potentially dangerous for any mounted drive that is in use, and, may cause data loss.
  • Do not use drives, on the client, that are mounted on the SBC.
  • Unmount the drive before hand in dietpi-drive_manager


>> Return to DietPi-Software List

v149

Posted: Tue Apr 11, 2017 2:54 pm
by Fourdee
SABnzbd:
NZB download manager with web interface.
sabnzbd.png
Access Web Interface: Web interface not loading / Unable to access:
In some instances, initial config generation during installation isn't successful.
  • If you experience this, please run the following commands to reapply config settings for DietPi (copy and paste all).

    Code: Select all

    dietpi-services stop
    
    FP_DIETPI_USERDATA_DIRECTORY='/mnt/dietpi_userdata'
    sed -i "/^download_dir =/c\download_dir = $FP_DIETPI_USERDATA_DIRECTORY/downloads/incomplete" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^complete_dir =/c\complete_dir = $FP_DIETPI_USERDATA_DIRECTORY/downloads/complete" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^nzb_backup_dir =/c\nzb_backup_dir = $FP_DIETPI_USERDATA_DIRECTORY/downloads/sabnzbd_nzb_backup" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^admin_dir =/c\admin_dir = $FP_DIETPI_USERDATA_DIRECTORY/downloads/sabnzbd_admin" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^log_dir =/c\log_dir = /var/log" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^log_level =/c\log_level = 0" /etc/sabnzbd/sabnzbd.ini #err only
    sed -i "/^refresh_rate =/c\refresh_rate = 2" /etc/sabnzbd/sabnzbd.ini
    sed -i "/^host =/c\host = 0.0.0.0" /etc/sabnzbd/sabnzbd.ini
    
    dietpi-services start
    
Access Downloads: Optional: Multi threaded PAR2: Recommended: Protect your privacy with a VPN:
Although we enable forced encryption on all our BitTorrent clients, if you wish to ensure complete privacy and peice of mind for all your downloaded content, using a VPN is critical.

>> Return to DietPi-Software List

v149

Posted: Sun Apr 23, 2017 1:36 pm
by Fourdee
Spotify Connect Web:
Web interface, client and player for Spotify Premium.

Access Web Interface: Generate spotify_appkey.key:
This is required to allow the application, access to Spotify API using your account. Transfer spotify_appkey.key:

>> Return to DietPi-Software List

v150

Posted: Mon May 15, 2017 1:34 pm
by Fourdee
CouchPotato:
Automatically download movies as they are released.

Recommend additional software:
couchpotato.png
Access Web Interface: Access Downloads:
  • Make sure you have one of DietPi's File Servers installed.
  • Folders used by Transmission:
    • Download folder = /mnt/dietpi_userdata/downloads
    • accessed from fileserver = /downloads
  • Folders used by CouchPotato:
    • Download folder = /mnt/dietpi_userdata/couchpotato
    • accessed from fileserver = /couchpotato
Recommended: Protect your privacy with a VPN:
Although we enable forced encryption on all our BitTorrent clients, if you wish to ensure complete privacy and peice of mind for all your downloaded content, using a VPN is critical.

>> Return to DietPi-Software List

v151

Posted: Wed May 24, 2017 11:56 am
by Fourdee
Koel:
Web interface music streamer.
koel.png
Access web interface:
  • url = http://192.168.0.100:8000
  • email address = The one you entered during installation
  • password = The one you entered during installation
First Run Setup:
Configure Koel to use the DietPi user data (music) directory:
  • In the web interface, on the left hand side click settings
  • Under Media Path, enter /mnt/dietpi_userdata/Music
  • Then click Scan
Transfer/Add Music:

>> Return to DietPi-Software List

v152

Posted: Wed Jun 07, 2017 12:09 pm
by Fourdee
Sonarr:
Automatically download your favorite TV shows, as they become available.

NB: A download client is required:
- Transmission BitTorrent server is recommended to enable automatic downloads.

sonarr.png
Access web interface: First Run Setup:
Before you can add TV shows, you'll need to select a search indexer to use from the web interface:
  • Simply goto Settings > Indexers then choose at least one indexer.
Setup your download client:
  • Simply goto Settings > Download Client , select your installed download client and enter required credentials.
Add a TV show:
  • Simply select Series > Add TV Show
  • Type a name of the show you wish to find
  • Once found, under path use the following location /mnt/dietpi_userdata/downloads
  • Change any further options (such as video quality) if needed, then select +
Recommended: Protect your privacy with a VPN:
Although we enable forced encryption on all our BitTorrent clients, if you wish to ensure complete privacy and peice of mind for all your downloaded content, using a VPN is critical.

>> Return to DietPi-Software List

v152

Posted: Wed Jun 07, 2017 3:47 pm
by Fourdee
Radarr:
Automatically download your favorite movies, as they become available.

NB: A download client is required:
- Transmission BitTorrent server is recommended to enable automatic downloads.

radarr.png
Access web interface: First Run Setup:
Before you can add movies, you'll need to select a search indexer to use from the web interface:
  • Simply goto Settings > Indexers then choose at least one indexer.
Setup your download client:
  • Simply goto Settings > Download Client , select your installed download client and enter required credentials.
Add a Movie:
  • Simply select Add Movies
  • Type a name of the movie you wish to find
  • Once found, under path use the following location /mnt/dietpi_userdata/downloads
  • Change any further options (such as video quality) if needed, then select +
Recommended: Protect your privacy with a VPN:
Although we enable forced encryption on all our BitTorrent clients, if you wish to ensure complete privacy and peice of mind for all your downloaded content, using a VPN is critical.

>> Return to DietPi-Software List