Case for OwnCloud Server

Guides and tutorials for various stuff. Posted by DietPi users.
Post Reply
Posts: 17
Joined: Fri Dec 18, 2020 2:43 pm

Case for OwnCloud Server

Post by Fabio »

Hello All!
Finally i’ve settled up all my system, and I’ve designed a case for my OwnCloud Server based on Raspberry Pi.
I’ve used Design Spark from RS to design it.
Basically I’m using a RPi2 plus two Hard Disks.
One is brand new from Seagate: ... UTF8&psc=1

The other one is one old off the shelf that I have here around for months, so I’ve just buyed an external case and used it as a Backup. ... 7Fb6BQ2JQS

The case is divided in three pieces, mainly for space and printing time reasons.
You have a case for cables, central and end case. All the pieces are designerd to self lock each other.

Attached you will find all the files, as soon as I will finish the print, I will share pictures of the result.
Feel free to modify and adapt the case to your own needs!

Hope this can help someone.
My printer is this one: ... 7FbN8VBRAD

And this is the filament used for the printing, extruder temperature is 200 degrees Celsius, 50 degrees Celsius for the heatbed. ... UTF8&psc=1

Here you can download all the files: ...

Happy New Year!
User avatar
Posts: 667
Joined: Thu Jul 20, 2017 8:55 am

Re: Case for OwnCloud Server

Post by WarHawk »

Very cool!
rendered 2.png
Post Reply