Help with OrangePi PC and trouble with usb ports

Having issues with your DietPi installation, or, found a bug? Post it here.
Post Reply
dims5
Posts: 3
Joined: Sun Jul 28, 2019 1:20 pm

Help with OrangePi PC and trouble with usb ports

Post by dims5 » Sun Jul 28, 2019 1:28 pm

Hello all!
Im install on my orangepi pc dietpi v6.0(stretch) image and after update it to latest version - v6.25.3.
On this version only one usb port is working(single port on board). Twin ports on board not working:(
What i need to enble all ports? Thanks!

User avatar
WarHawk
Posts: 520
Joined: Thu Jul 20, 2017 7:55 am

Re: Help with OrangePi PC and trouble with usb ports

Post by WarHawk » Sun Jul 28, 2019 3:26 pm

Have you done an apt-get update and upgrade yet?

dims5
Posts: 3
Joined: Sun Jul 28, 2019 1:20 pm

Re: Help with OrangePi PC and trouble with usb ports

Post by dims5 » Mon Jul 29, 2019 11:25 am

i think i have

sakal
Posts: 11
Joined: Tue Mar 21, 2017 9:32 am

Re: Help with OrangePi PC and trouble with usb ports

Post by sakal » Mon Jul 29, 2019 12:43 pm

Hi, where did you download last image? Can you write here link for image DietPI for OrangePi PC ?

dims5
Posts: 3
Joined: Sun Jul 28, 2019 1:20 pm

Re: Help with OrangePi PC and trouble with usb ports

Post by dims5 » Mon Jul 29, 2019 12:58 pm

I download dietpi v6 image before it was removed from this site and then automatically update to latest version during installation

sakal
Posts: 11
Joined: Tue Mar 21, 2017 9:32 am

Re: Help with OrangePi PC and trouble with usb ports

Post by sakal » Mon Jul 29, 2019 1:01 pm

Ooooh , can you share image on mega or dropbox or anywhere? I will try on my Orangepi PC

User avatar
WarHawk
Posts: 520
Joined: Thu Jul 20, 2017 7:55 am

Re: Help with OrangePi PC and trouble with usb ports

Post by WarHawk » Tue Jul 30, 2019 4:13 am

When I was running a 1TB NAS drive, I ended up having to provide external power to the drive because the power output of the USB ports are nowhere near enough to run a 2.5" drive...I ended up cutting a USB to SATA cable, then tying in an extra 5vdc USB plug and heatshrinking it, after that didn't have problems...
Also just like the OPi Zero they run hot hot hot...but in my custom 3D printed case I designed with a 40mm fan on 5vdc, not only is it silent..but w/ a modest heatsink...I rarely get above 40°C even when running at 100% cpu usage

Image

Truth be told...I kept having nextcloud lockups quite a bit on older Dietpi (then when I did an upgrade...it completely bricked it [probably my fault])...ended up going with openmediavault ARM build and it has been stable as a rock since...but that is not a ding against Dietpi

User avatar
johnvick
Legend
Posts: 653
Joined: Wed Jun 08, 2016 10:53 am
Location: New Zealand

Re: Help with OrangePi PC and trouble with usb ports

Post by johnvick » Tue Jul 30, 2019 5:34 am

Nice job on the case :)

Post Reply