DietPi

The Cooling of HC-2 doesn't work as it should!, see Benchmark results. For Tests i glue 2x 100x100mm Fans direct on the Heatsink and powered them external. Room Temp: 21 °C HDD: in sleeping mode (so less heat from it) Test 1 - Full Power: CPU Governor: performance CPU: 4x 1400 Mhz + 4x 20000 Mhz Coo...

I'll try it next week, then can give you a review.

Cooling Issue - Tests:

1x 40mm Fan on Headspreader = 53-57 °C (idle/30%load)
1x 92mm Fan on Headspreader = 42-47 °C (Idle/30% load)

Next Step: New Case, with 2x92mm Fan or 100mm perhaps

First Test: HC2.JPG Result W7 -> Samba -> HC2: HC2-WDR6TB-SAMBA_W_LAN.JPG Result HC2 -> Samba -> W7: HC2-WDR6TB-SAMBA-R-LAN.JPG Iperf3 Tests: Read: 880 Mbit / sec Write: 660 Mbit / sec Note: Temperature about 53-67 °C as cpu mentioned it. Here i wil build first up a better case including fans, as t...

I'll will test it, today evening, then upload some screenshots.

Starting Testing Hardware Setup: - Odroid HC-2 including cover - CR2032 Backup Battery - WD RED 6TB (WD6002FFWX) HDD - SanDisk Ultra 16 GB micro sd-card Software Setup: - Official Dietpi Image Odroid XU3/XU4/HC1 (DietPi_OdroidXU4-ARMv7-Jessie.7z) - Samba Test: - Sysbench (similar results as HC-1) - ...

As far as i got it tested, the actually odroid image for xu4/hc1 works also on HC-2 out of the box.

great work

:mrgreen: My HC-2 is just arrived more news i can give you later.

o.... i don't look in detail, i thought you are talkig about the XU4,
but they are so similar to each other, i thought the most different is the GPU,
there i would start my search for errors. As i do not know if the XU4 image support the
Power VR series 5XT SGX544 GPU.

FTP-Speed - large file @ Samsung SSD