Search found 744 matches

by WarHawk
Wed Aug 04, 2021 4:34 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

Well if you have to use rasbian...I recommend installing nextcloud and other apps as docker instances w/ it pointing to a persistent bound location for data storage and config, using portainer as a way to control the docker containers as well Too bad there is so much going on in the DietPi scripting...
by WarHawk
Tue Aug 03, 2021 10:05 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

aaaaaand nothing!!!!

Spent all night hacking away at it and it just won't work with DietPi scripting
by WarHawk
Tue Aug 03, 2021 6:53 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

I was just hoping there was a way to create a 2nd SSID on one device... This guy did it with a simple ESP01 and it works flawlessly... https://github.com/martin-ger/esp_wifi_repeater Doing some poking around it might be a hostapd issue...checking...maybe it's a driver issue https://unix.stackexchan...
by WarHawk
Tue Aug 03, 2021 6:22 am
Forum: Troubleshooting
Topic: Diet Pi Changed or Reset networking?
Replies: 2
Views: 39

Re: Diet Pi Changed or Reset networking?

did you have your dietpi setup w/ a static IP address? Did you use dietpi-config to set static IP? This is how I setup my pihole If not it pulled a DHCP address from your router A. Log into your router and find the address assigned to the pi B. Run angryipscanner and find it what way (or nmap for li...
by WarHawk
Tue Aug 03, 2021 6:12 am
Forum: Troubleshooting
Topic: Pigpio
Replies: 10
Views: 69

Re: Pigpio

From install.sh USER_RUN_FILE=/home/pi/.bashrc You will need to create a user named pi on the device... or you could change it to USER_RUN_FILE=/home/dietpi/.bashrc You did ensure you installed the prerequisites right? sudo apt-get install python-smbus sudo apt-get install pigpio python-pigpio pytho...
by WarHawk
Sat Jul 31, 2021 1:54 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

I guess you would need to use 2 interfaces. A WiFi adapter to broadcast the AP SSID and a 2nd interfaces to create the local network connection to the internet I was just hoping there was a way to create a 2nd SSID on one device... This guy did it with a simple ESP01 and it works flawlessly... http...
by WarHawk
Fri Jul 30, 2021 10:02 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

Joulinar wrote: Fri Jul 30, 2021 9:02 am You did used 2 WiFi adapter?
negative
by WarHawk
Fri Jul 30, 2021 6:33 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

Just tried it...didn't work Sacrificed my Pwnagotchi build (imaged the card first of course) and installed the latest DietPi image on it...and attempted the install...no go...it would connect to the wireless but would not broadcast the AP SSID for the Captive Portal...I tried all night to get it to ...
by WarHawk
Thu Jul 29, 2021 7:56 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

Best bet would be to just set it up as a WIFI AP, then use your phone to direct connect to the AP's SSID, then you can directly use either a URL or simply the DNS IP of the AP as the connector to Nextcloud and then sync the images that way. Yes, that is what my goal is here, however I am unable to ...
by WarHawk
Wed Jul 28, 2021 3:49 am
Forum: Troubleshooting
Topic: Pi Zero W Project: Travel Storage Device
Replies: 27
Views: 335

Re: Pi Zero W Project: Travel Storage Device

Best bet would be to just set it up as a WIFI AP, then use your phone to direct connect to the AP's SSID, then you can directly use either a URL or simply the DNS IP of the AP as the connector to Nextcloud and then sync the images that way. Heck you could probably run a full bore photo gallery (incl...