DietPi / Fuzon

Hello, I've installed DietPi on my Atom miniPC. Now I have bought a Kingston A400 SSD and I have cloned using clonezilla DietPi on it: I get speeds of about Write = 120 MB/s | Read = 310 MB/s. The question: Do I need to trim? I've found this answer by Fourdee in a post related to SSD+XU4: https://di...

Sorry, MichaIng I don't understand. I installed the Armbian version from Balbes150. Then, I could read CPU temp. After installing DietPi, I can't. This only happens with my S905X. I have another Android TV Box, S912, and, with the same process of installation (Balbes150 Armbian + DietPi) I can read ...

Hello, @WarHawk this unit seems to be expensive to me, looking at the specs. I don't know in Russia, but in Spain you can get an S905X 2GB-16GB for less than 40 euros.

Hello, As I've already explained ("How I got DietPi running on my S905X Android TV Box": https://dietpi.com/phpbb/viewtopic.php?f=15&t=5643&p=16956#p16956 ), I have installed DietPi on it. Don't know why, but before I could read the CPU temp, but now I can't. Please, any ideas? I suppose some packag...

Hello, As you may know I love DietPi and I install it everywhere (RPi1, RPi2, Odroid C2, BIOS old netbooks, an EFI64 Intel Atom miniPC...). Now I have installed it on my Android TV Box M16, based on Amlogic S905X, a 2GB-16 GB model (very similar to Odroid C2, but cheaper, 100 Mbps ethernet, and with...

MichaIng wrote: ↑

Fri Feb 08, 2019 3:09 pm

Jep the issue should be fixed with v6.21. If you are still stuck in the loop, please cancel any dietpi-software prompt and do the following:

Code: Select all

> /DietPi/dietpi/.update_stage
echo 1 > /DietPi/dietpi/.install_stage
dietpi-update 1

Thank you very much.

Now the issue is solved, at last!

Torvald wrote: ↑

Fri Feb 08, 2019 2:41 pm

Hi! Did you watch this thread?

Thank you, I hadn't seen it.

I hope somebody will help us, It must be a service that is marked as "active", and it must be disabled; when the "first boot assistant" is loaded, as you see, a lot of services are disabled. The workaround is pressing Ctrl+C when the system boots, or when you go into it by SSH, and, after that, typi...

****WORKAROUND****

When I type I get all the processes up.

I need you to know how to tell DietPi it's yet configured, so the "first boot assistant" is not loaded.

It was php.
Doing I can get into Pi Hole Web Admin.

So, now, I have 26 services; when I reboot, I have 18.

Is this related to the "first boot" screens I get, maybe it doesn't start all the DietPi Services I had configured?

Thank you,