=~=~=~=~=~=~=~=~=~=~=~= PuTTY log 2024.12.31 21:39:40 =~=~=~=~=~=~=~=~=~=~=~= DDR Version V1.10 20210810 ln ddrconfig:7 LPDDR4X, 324MHz BW=32 Col=10 Bk=8 CS0 Row=17 CS1 Row=17 CS=2 Die BW=8 Size=8192MB tdqss: cs0 dqs0: -48ps, dqs1: -144ps, dqs2: -96ps, dqs3: -144ps, tdqss: cs1 dqs0: -72ps, dqs1: -144ps, dqs2: -72ps, dqs3: -144ps, change to: 324MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x63 change to: 528MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 780MHz PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:41% dram drv:40,odt:0 clk skew:0x58 change to: 1056MHz(final freq) PHY drv:clk:36,ca:36,DQ:29,odt:60 vrefinner:16%, vrefout:22% dram drv:40,odt:80 vref_ca:00000071 clk skew:0x3f cs 0: the read training result: DQS0:0x42, DQS1:0x3e, DQS2:0x44, DQS3:0x3c, min : 0xf 0xf 0xf 0x11 0x2 0x5 0x6 0x7 , 0x5 0x6 0x3 0x1 0x9 0xd 0x10 0xf , 0x2 0x1 0xe 0xf 0xa 0xc 0xe 0xb , 0x6 0x6 0x9 0x1 0xd 0xe 0xe 0xc , mid :0x2d 0x2d 0x2d 0x2d 0x22 0x24 0x25 0x27 ,0x24 0x26 0x22 0x20 0x27 0x2e 0x2f 0x2f , 0x21 0x20 0x2e 0x2d 0x2a 0x2a 0x2c 0x2a ,0x23 0x24 0x27 0x1f 0x2a 0x2b 0x2b 0x2a , max :0x4b 0x4c 0x4c 0x4a 0x43 0x44 0x45 0x47 ,0x44 0x46 0x41 0x40 0x46 0x4f 0x4e 0x4f , 0x40 0x40 0x4e 0x4b 0x4a 0x48 0x4a 0x49 ,0x41 0x42 0x46 0x3d 0x47 0x48 0x49 0x48 , range:0x3c 0x3d 0x3d 0x39 0x41 0x3f 0x3f 0x40 ,0x3f 0x40 0x3e 0x3f 0x3d 0x42 0x3e 0x40 , 0x3e 0x3f 0x40 0x3c 0x40 0x3c 0x3c 0x3e ,0x3b 0x3c 0x3d 0x3c 0x3a 0x3a 0x3b 0x3c , the write training result: DQS0:0x39, DQS1:0x2c, DQS2:0x33, DQS3:0x2c, min :0x54 0x55 0x56 0x57 0x4e 0x4e 0x4f 0x53 0x52 ,0x47 0x47 0x43 0x42 0x4a 0x4f 0x50 0x52 0x4c , 0x42 0x43 0x4e 0x4e 0x4c 0x4c 0x4e 0x4f 0x4f ,0x46 0x46 0x48 0x43 0x4d 0x4e 0x4e 0x4e 0x47 , mid :0x6f 0x70 0x70 0x72 0x65 0x65 0x68 0x6c 0x6b ,0x62 0x60 0x5c 0x5c 0x63 0x69 0x6a 0x6c 0x66 , 0x5d 0x5b 0x67 0x69 0x64 0x63 0x65 0x65 0x66 ,0x60 0x5f 0x61 0x5c 0x67 0x68 0x67 0x69 0x60 , max :0x8b 0x8b 0x8b 0x8d 0x7d 0x7d 0x81 0x86 0x85 ,0x7e 0x79 0x76 0x77 0x7c 0x84 0x84 0x87 0x80 , 0x78 0x74 0x81 0x84 0x7d 0x7a 0x7c 0x7c 0x7d ,0x7b 0x79 0x7b 0x75 0x82 0x83 0x81 0x84 0x7a , range:0x37 0x36 0x35 0x36 0x2f 0x2f 0x32 0x33 0x33 ,0x37 0x32 0x33 0x35 0x32 0x35 0x34 0x35 0x34 , 0x36 0x31 0x33 0x36 0x31 0x2e 0x2e 0x2d 0x2e ,0x35 0x33 0x33 0x32 0x35 0x35 0x33 0x36 0x33 , cs 1: the read training result: DQS0:0x41, DQS1:0x3f, DQS2:0x43, DQS3:0x3c, min : 0xe 0xd 0xe 0xe 0x1 0x2 0x5 0x6 , 0x6 0x6 0x3 0x1 0x8 0xe 0xe 0x10 , 0x2 0x2 0xf 0x10 0xb 0xc 0xe 0xb , 0x6 0x6 0x9 0x2 0xd 0xe 0xe 0xd , mid :0x2c 0x2c 0x2d 0x2b 0x21 0x22 0x25 0x26 ,0x25 0x26 0x22 0x20 0x28 0x2f 0x2e 0x30 , 0x21 0x20 0x2e 0x2e 0x2b 0x29 0x2b 0x29 ,0x23 0x23 0x27 0x20 0x29 0x2b 0x2c 0x2a , max :0x4a 0x4b 0x4c 0x49 0x42 0x42 0x45 0x47 ,0x44 0x46 0x42 0x40 0x48 0x50 0x4e 0x50 , 0x40 0x3f 0x4d 0x4c 0x4b 0x47 0x49 0x48 ,0x40 0x41 0x46 0x3f 0x46 0x48 0x4a 0x47 , range:0x3c 0x3e 0x3e 0x3b 0x41 0x40 0x40 0x41 ,0x3e 0x40 0x3f 0x3f 0x40 0x42 0x40 0x40 , 0x3e 0x3d 0x3e 0x3c 0x40 0x3b 0x3b 0x3d ,0x3a 0x3b 0x3d 0x3d 0x39 0x3a 0x3c 0x3a , the write training result: DQS0:0x39, DQS1:0x2c, DQS2:0x33, DQS3:0x2c, min :0x50 0x51 0x53 0x53 0x49 0x49 0x4b 0x50 0x4e ,0x47 0x48 0x44 0x43 0x4b 0x4f 0x50 0x53 0x4c , 0x45 0x46 0x50 0x50 0x4e 0x4f 0x50 0x52 0x52 ,0x45 0x45 0x47 0x42 0x4c 0x4c 0x4c 0x4d 0x46 , mid :0x6c 0x6b 0x6e 0x6e 0x62 0x61 0x63 0x69 0x66 ,0x64 0x61 0x5f 0x5f 0x64 0x6b 0x6a 0x6e 0x66 , 0x61 0x5e 0x6b 0x6c 0x69 0x67 0x68 0x6a 0x6b ,0x60 0x5e 0x60 0x5b 0x68 0x68 0x68 0x68 0x5e , max :0x88 0x86 0x89 0x89 0x7b 0x7a 0x7c 0x82 0x7e ,0x81 0x7b 0x7a 0x7b 0x7d 0x87 0x85 0x89 0x81 , 0x7d 0x77 0x86 0x89 0x84 0x80 0x81 0x83 0x84 ,0x7c 0x77 0x7a 0x75 0x84 0x84 0x84 0x84 0x77 , range:0x38 0x35 0x36 0x36 0x32 0x31 0x31 0x32 0x30 ,0x3a 0x33 0x36 0x38 0x32 0x38 0x35 0x36 0x35 , 0x38 0x31 0x36 0x39 0x36 0x31 0x31 0x31 0x32 ,0x37 0x32 0x33 0x33 0x38 0x38 0x38 0x37 0x31 , CA Training result: cs:0 min :0x42 0x43 0x3c 0x3d 0x3e 0x39 0x46 ,0x45 0x43 0x3f 0x3d 0x3f 0x39 0x42 , cs:0 mid :0x81 0x81 0x7b 0x7c 0x7b 0x78 0x73 ,0x82 0x83 0x7d 0x7c 0x7c 0x7a 0x70 , cs:0 max :0xc0 0xc0 0xbb 0xbb 0xb9 0xb7 0xa0 ,0xbf 0xc3 0xbb 0xbc 0xba 0xbb 0x9e , cs:0 range:0x7e 0x7d 0x7f 0x7e 0x7b 0x7e 0x5a ,0x7a 0x80 0x7c 0x7f 0x7b 0x82 0x5c , cs:1 min :0x40 0x45 0x3c 0x3e 0x3c 0x3b 0x41 ,0x42 0x43 0x39 0x3e 0x3c 0x3d 0x42 , cs:1 mid :0x80 0x80 0x7b 0x7b 0x7b 0x78 0x6e ,0x81 0x80 0x7b 0x7a 0x7c 0x79 0x70 , cs:1 max :0xc1 0xbc 0xbb 0xb8 0xba 0xb6 0x9c ,0xc1 0xbe 0xbe 0xb7 0xbd 0xb6 0x9f , cs:1 range:0x81 0x77 0x7f 0x7a 0x7e 0x7b 0x5b ,0x7f 0x7b 0x85 0x79 0x81 0x79 0x5d , out U-Boot SPL board init U-Boot SPL 2017.09-orangepi (Apr 28 2024 - 10:26:42) Trying to boot from MMC1 No misc partition Trying fit image at 0x4000 sector ## Verified-boot: 0 ## Checking atf-1 0x00040000 ... sha256(b5946ac63d...) + OK ## Checking u-boot 0x00a00000 ... sha256(e97ae3334a...) + OK ## Checking fdt-1 0x00ad30e0 ... sha256(10f441a8a0...) + OK ## Checking atf-2 0x00069000 ... sha256(a9a1e63bef...) + OK ## Checking atf-3 0x0006b000 ... sha256(2f91089eb7...) + OK ## Checking atf-4 0xfdcc1000 ... sha256(b8dca786b4...) + OK ## Checking atf-5 0xfdcce000 ... sha256(86ef885748...) + OK ## Checking atf-6 0xfdcd0000 ... sha256(0b2b146c60...) + OK Jumping to U-Boot(0x00a00000) via ARM Trusted Firmware(0x00040000) Total: 712.654 ms INFO: Preloader serial: 2 NOTICE: BL31: v2.3():v2.3-645-g8cea6ab0b:cl, fwver: v1.44 NOTICE: BL31: Built : 16:36:43, Sep 19 2023 INFO: GICv3 without legacy support detected. INFO: ARM GICv3 driver initialized in EL3 INFO: pmu v1 is valid 220114 INFO: l3 cache partition cfg-0 INFO: dfs DDR fsp_param[0].freq_mhz= 1056MHz INFO: dfs DDR fsp_param[1].freq_mhz= 324MHz INFO: dfs DDR fsp_param[2].freq_mhz= 528MHz INFO: dfs DDR fsp_param[3].freq_mhz= 780MHz INFO: Using opteed sec cpu_context! INFO: boot cpu mask: 0 INFO: BL31: Initializing runtime services WARNING: No OPTEE provided by BL2 boot loader, Booting device without OPTEE initialization. SMC`s destined for OPTEE will return SMC_UNK ERROR: Error initializing runtime service opteed_fast INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0xa00000 INFO: SPSR = 0x3c9 U-Boot 2024.10-armbian-2024.10-Sf919-Pbdc8-H264e-V155b-Bda0a-R448a (Nov 21 2024 - 02:52:24 +0000) Model: Xunlong Orange Pi 3B DRAM: 8 GiB (effective 7.7 GiB) PMIC: RK809 (on=0x40, off=0x00) Core: 319 devices, 30 uclasses, devicetree: separate MMC: mmc@fe2b0000: 1, mmc@fe2c0000: 2, mmc@fe310000: 0 Loading Environment from nowhere... OK In: serial@fe660000 Out: serial@fe660000 Err: serial@fe660000 Model: Xunlong Orange Pi 3B Net: No ethernet found. Hit any key to stop autoboot: 1  0 Scanning for bootflows in all bootdevs Seq Method State Uclass Part Name Filename --- ----------- ------ -------- ---- ------------------------ ---------------- Scanning global bootmeth 'efi_mgr': 78Card did not respond to voltage select! : -110 Card did not respond to voltage select! : -110 No EFI system partition No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables No EFI system partition Failed to persist EFI variables 0 efi_mgr ready (none) 0 ** Booting bootflow '' with efi_mgr Loading Boot0000 'mmc 1' failed EFI boot manager: Cannot load any image Boot failed (err=-14) Scanning bootdev 'mmc@fe2b0000.bootdev': 1 script ready mmc 1 mmc@fe2b0000.bootdev.part /boot/boot.scr ** Booting bootflow 'mmc@fe2b0000.bootdev.part_1' with script 303 bytes read in 3 ms (98.6 KiB/s) 31076864 bytes read in 2604 ms (11.4 MiB/s) 13151992 bytes read in 1140 ms (11 MiB/s) 117380 bytes read in 19 ms (5.9 MiB/s) Working FDT set to 12000000 ## Loading init Ramdisk from Legacy Image at 12180000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 13151928 Bytes = 12.5 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 12000000 Booting using the fdt blob at 0x12000000 Working FDT set to 12000000 Loading Ramdisk to ec220000, end eceaaeb8 ... OK Loading Device Tree to 00000000ec200000, end 00000000ec21fa83 ... OK Working FDT set to ec200000 Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x412fd050] [ 0.000000] Linux version 6.10.6-edge-rockchip64 (build@armbian) (aarch64-linux-gnu-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Mon Aug 19 04:05:40 UTC 2024 [ 0.000000] KASLR enabled [ 0.000000] Machine model: Rockchip RK3566 OPi 3B [ 0.000000] efi: UEFI not found. [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000000200000-0x00000001ffffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x1fefe0940-0x1fefe2fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000000200000-0x00000000ffffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000000200000-0x00000000efffffff] [ 0.000000] node 0: [mem 0x0000000100000000-0x00000001ffffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000000200000-0x00000001ffffffff] [ 0.000000] On node 0, zone DMA: 512 pages in unavailable ranges [ 0.000000] cma: Reserved 128 MiB at 0x00000000e4200000 on node -1 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.2 [ 0.000000] percpu: Embedded 33 pages/cpu s97448 r8192 d29528 u135168 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: GIC system register CPU interface [ 0.000000] CPU features: detected: Virtualization Host Extensions [ 0.000000] CPU features: kernel page table isolation forced ON by KASLR [ 0.000000] CPU features: detected: Kernel page table isolation (KPTI) [ 0.000000] CPU features: detected: Qualcomm erratum 1009, or ARM erratum 1286807, 2441009 [ 0.000000] CPU features: detected: ARM errata 1165522, 1319367, or 1530923 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Kernel command line: root=UUID=c78c2951-8532-48d3-9a20-3fd4a972501f rootfstype=ext4 rootwait console=ttyS2,1500000 console=tty1 consoleblank=0 coherent_pool=2M usb-storage.quirks= net.ifnames=0 [ 0.000000] Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes, linear) [ 0.000000] Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes, linear) [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 2031104 [ 0.000000] Policy zone: Normal [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] software IO TLB: area num 4. [ 0.000000] software IO TLB: mapped [mem 0x00000000e0200000-0x00000000e4200000] (64MB) [ 0.000000] Memory: 7726720K/8124416K available (17344K kernel code, 2380K rwdata, 5524K rodata, 4928K init, 621K bss, 266624K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] rcu: RCU event tracing is enabled. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=256 to nr_cpu_ids=4. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] RCU Tasks: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] RCU Tasks Trace: Setting shift to 2 and lim to 1 rcu_task_cb_adjust=1. [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] GICv3: GIC: Using split EOI/Deactivate mode [ 0.000000] GICv3: 320 SPIs implemented [ 0.000000] GICv3: 0 Extended SPIs implemented [ 0.000000] GICv3: MBI range [296:319] [ 0.000000] GICv3: Using MBI frame 0x00000000fd410000 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GICv3: GICv3 features: 16 PPIs [ 0.000000] GICv3: CPU0: found redistributor 0 region 0:0x00000000fd460000 [ 0.000000] ITS: No ITS available, not enabling LPIs [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001382] Console: colour dummy device 80x25 [ 0.001404] printk: legacy console [tty1] enabled [ 0.002345] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.002390] pid_max: default: 32768 minimum: 301 [ 0.002522] LSM: initializing lsm=capability,yama,apparmor [ 0.002585] Yama: becoming mindful. [ 0.002755] AppArmor: AppArmor initialized [ 0.002949] Mount-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.003025] Mountpoint-cache hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.006937] rcu: Hierarchical SRCU implementation. [ 0.006990] rcu: Max phase no-delay instances is 1000. [ 0.009658] EFI services will not be available. [ 0.010329] smp: Bringing up secondary CPUs ... [ 0.011350] Detected VIPT I-cache on CPU1 [ 0.011460] GICv3: CPU1: found redistributor 100 region 0:0x00000000fd480000 [ 0.011529] CPU1: Booted secondary processor 0x0000000100 [0x412fd050] [ 0.012737] Detected VIPT I-cache on CPU2 [ 0.012839] GICv3: CPU2: found redistributor 200 region 0:0x00000000fd4a0000 [ 0.012897] CPU2: Booted secondary processor 0x0000000200 [0x412fd050] [ 0.014016] Detected VIPT I-cache on CPU3 [ 0.014112] GICv3: CPU3: found redistributor 300 region 0:0x00000000fd4c0000 [ 0.014166] CPU3: Booted secondary processor 0x0000000300 [0x412fd050] [ 0.014331] smp: Brought up 1 node, 4 CPUs [ 0.014482] SMP: Total of 4 processors activated. [ 0.014500] CPU: All CPU(s) started at EL2 [ 0.014518] CPU features: detected: 32-bit EL0 Support [ 0.014534] CPU features: detected: 32-bit EL1 Support [ 0.014552] CPU features: detected: Data cache clean to the PoU not required for I/D coherence [ 0.014576] CPU features: detected: Common not Private translations [ 0.014593] CPU features: detected: CRC32 instructions [ 0.014617] CPU features: detected: RCpc load-acquire (LDAPR) [ 0.014635] CPU features: detected: LSE atomic instructions [ 0.014652] CPU features: detected: Privileged Access Never [ 0.014670] CPU features: detected: RAS Extension Support [ 0.014692] CPU features: detected: Speculative Store Bypassing Safe (SSBS) [ 0.014790] alternatives: applying system-wide alternatives [ 0.023190] devtmpfs: initialized [ 0.046279] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.046376] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.050769] 25008 pages in range for non-PLT usage [ 0.050800] 516528 pages in range for PLT usage [ 0.051208] pinctrl core: initialized pinctrl subsystem [ 0.052168] DMI not present or invalid. [ 0.057295] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.059497] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.060726] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.061990] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.062116] audit: initializing netlink subsys (disabled) [ 0.062463] audit: type=2000 audit(0.056:1): state=initialized audit_enabled=0 res=1 [ 0.063678] thermal_sys: Registered thermal governor 'fair_share' [ 0.063691] thermal_sys: Registered thermal governor 'bang_bang' [ 0.063719] thermal_sys: Registered thermal governor 'step_wise' [ 0.063739] thermal_sys: Registered thermal governor 'user_space' [ 0.063861] cpuidle: using governor menu [ 0.064274] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.064493] ASID allocator initialised with 32768 entries [ 0.064858] Serial: AMBA PL011 UART driver [ 0.081678] platform fe040000.vop: Fixed dependency cycle(s) with /hdmi@fe0a0000 [ 0.081827] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /vop@fe040000 [ 0.087291] platform 3c0000000.pcie: Fixed dependency cycle(s) with /pcie@fe260000/legacy-interrupt-controller [ 0.109115] gpio gpiochip0: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.109737] rockchip-gpio fdd60000.gpio: probed /pinctrl/gpio@fdd60000 [ 0.110252] gpio gpiochip1: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.110656] rockchip-gpio fe740000.gpio: probed /pinctrl/gpio@fe740000 [ 0.111095] gpio gpiochip2: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.111482] rockchip-gpio fe750000.gpio: probed /pinctrl/gpio@fe750000 [ 0.112000] gpio gpiochip3: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.112384] rockchip-gpio fe760000.gpio: probed /pinctrl/gpio@fe760000 [ 0.112886] gpio gpiochip4: Static allocation of GPIO base is deprecated, use dynamic allocation. [ 0.113303] rockchip-gpio fe770000.gpio: probed /pinctrl/gpio@fe770000 [ 0.115944] platform fe0a0000.hdmi: Fixed dependency cycle(s) with /hdmi-con [ 0.116093] platform hdmi-con: Fixed dependency cycle(s) with /hdmi@fe0a0000 [ 0.122938] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.122991] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.123015] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.123036] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.123057] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.123076] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.123098] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.123116] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.123931] Demotion targets for Node 0: null [ 0.125136] cryptd: max_cpu_qlen set to 1000 [ 0.192805] raid6: neonx8 gen() 1407 MB/s [ 0.260990] raid6: neonx4 gen() 1437 MB/s [ 0.329168] raid6: neonx2 gen() 1319 MB/s [ 0.397320] raid6: neonx1 gen() 1074 MB/s [ 0.465498] raid6: int64x8 gen() 912 MB/s [ 0.533692] raid6: int64x4 gen() 1048 MB/s [ 0.601857] raid6: int64x2 gen() 934 MB/s [ 0.670079] raid6: int64x1 gen() 688 MB/s [ 0.670105] raid6: using algorithm neonx4 gen() 1437 MB/s [ 0.738159] raid6: .... xor() 1102 MB/s, rmw enabled [ 0.738184] raid6: using neon recovery algorithm [ 0.739738] iommu: Default domain type: Translated [ 0.739778] iommu: DMA domain TLB invalidation policy: strict mode [ 0.742807] SCSI subsystem initialized [ 0.743535] usbcore: registered new interface driver usbfs [ 0.743609] usbcore: registered new interface driver hub [ 0.743692] usbcore: registered new device driver usb [ 0.744538] pps_core: LinuxPPS API ver. 1 registered [ 0.744566] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.744616] PTP clock support registered [ 0.744684] EDAC MC: Ver: 3.0.0 [ 0.745270] scmi_core: SCMI protocol bus registered [ 0.746989] NetLabel: Initializing [ 0.747021] NetLabel: domain hash size = 128 [ 0.747040] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.747155] NetLabel: unlabeled traffic allowed by default [ 0.747422] vgaarb: loaded [ 0.748099] clocksource: Switched to clocksource arch_sys_counter [ 0.751399] VFS: Disk quotas dquot_6.6.0 [ 0.751503] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.752437] AppArmor: AppArmor Filesystem Enabled [ 0.766499] NET: Registered PF_INET protocol family [ 0.767058] IP idents hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.774941] tcp_listen_portaddr_hash hash table entries: 4096 (order: 4, 65536 bytes, linear) [ 0.775239] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.775457] TCP established hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.776692] TCP bind hash table entries: 65536 (order: 9, 2097152 bytes, linear) [ 0.778915] TCP: Hash tables configured (established 65536 bind 65536) [ 0.779233] UDP hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779489] UDP-Lite hash table entries: 4096 (order: 5, 131072 bytes, linear) [ 0.779952] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.780023] NET: Registered PF_XDP protocol family [ 0.780065] PCI: CLS 0 bytes, default 64 [ 0.780560] Trying to unpack rootfs image as initramfs... [ 0.788702] kvm [1]: nv: 477 coarse grained trap handlers [ 0.789232] kvm [1]: IPA Size Limit: 40 bits [ 0.789315] kvm [1]: GICv3: no GICV resource entry [ 0.789340] kvm [1]: disabling GICv2 emulation [ 0.789389] kvm [1]: GIC system register CPU interface enabled [ 0.789449] kvm [1]: vgic interrupt IRQ9 [ 0.789523] kvm [1]: VHE mode initialized successfully [ 0.792901] Initialise system trusted keyrings [ 0.793018] Key type blacklist registered [ 0.793423] workingset: timestamp_bits=44 max_order=21 bucket_order=0 [ 0.793575] zbud: loaded [ 0.794599] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.795390] fuse: init (API version 7.40) [ 0.798191] integrity: Platform Keyring initialized [ 0.872007] xor: measuring software checksum speed [ 0.877851] 8regs : 1723 MB/sec [ 0.884214] 32regs : 1576 MB/sec [ 0.889993] arm64_neon : 1730 MB/sec [ 0.890038] xor: using function: arm64_neon (1730 MB/sec) [ 0.890076] Key type asymmetric registered [ 0.890098] Asymmetric key parser 'x509' registered [ 0.890333] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 246) [ 0.890758] io scheduler mq-deadline registered [ 0.890794] io scheduler kyber registered [ 0.890897] io scheduler bfq registered [ 0.906108] rockchip-dw-pcie 3c0000000.pcie: host bridge /pcie@fe260000 ranges: [ 0.906220] rockchip-dw-pcie 3c0000000.pcie: IO 0x00f4100000..0x00f41fffff -> 0x00f4100000 [ 0.906275] rockchip-dw-pcie 3c0000000.pcie: MEM 0x00f4200000..0x00f5ffffff -> 0x00f4200000 [ 0.906325] rockchip-dw-pcie 3c0000000.pcie: MEM 0x0300000000..0x033fffffff -> 0x0040000000 [ 0.906615] rockchip-dw-pcie 3c0000000.pcie: iATU: unroll T, 8 ob, 8 ib, align 64K, limit 8G [ 1.729091] Freeing initrd memory: 12840K [ 2.012510] rockchip-dw-pcie 3c0000000.pcie: Phy link never came up [ 2.013266] rockchip-dw-pcie 3c0000000.pcie: PCI host bridge to bus 0000:00 [ 2.013314] pci_bus 0000:00: root bus resource [bus 00-0f] [ 2.013346] pci_bus 0000:00: root bus resource [io 0x0000-0xfffff] (bus address [0xf4100000-0xf41fffff]) [ 2.013378] pci_bus 0000:00: root bus resource [mem 0xf4200000-0xf5ffffff] [ 2.013405] pci_bus 0000:00: root bus resource [mem 0x300000000-0x33fffffff] (bus address [0x40000000-0x7fffffff]) [ 2.013479] pci 0000:00:00.0: [1d87:3566] type 01 class 0x060400 PCIe Root Port [ 2.013538] pci 0000:00:00.0: ROM [mem 0x00000000-0x0000ffff pref] [ 2.013568] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.013597] pci 0000:00:00.0: bridge window [io 0x0000-0x0fff] [ 2.013623] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff] [ 2.013654] pci 0000:00:00.0: bridge window [mem 0x00000000-0x000fffff 64bit pref] [ 2.013759] pci 0000:00:00.0: supports D1 D2 [ 2.013784] pci 0000:00:00.0: PME# supported from D0 D1 D3hot [ 2.023199] pci_bus 0000:01: busn_res: can not insert [bus 01-ff] under [bus 00-0f] (conflicts with (null) [bus 00-0f]) [ 2.023646] pci 0000:00:00.0: ROM [mem 0xf4200000-0xf420ffff pref]: assigned [ 2.023693] pci 0000:00:00.0: PCI bridge to [bus 01-ff] [ 2.026647] pcieport 0000:00:00.0: PME: Signaling with IRQ 22 [ 2.027177] pcieport 0000:00:00.0: AER: enabled with IRQ 22 [ 2.033241] dma-pl330 fe530000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.033299] dma-pl330 fe530000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.036370] dma-pl330 fe550000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.036416] dma-pl330 fe550000.dma-controller: DBUFF-128x8bytes Num_Chans-8 Num_Peri-32 Num_Events-16 [ 2.039606] Serial: 8250/16550 driver, 8 ports, IRQ sharing disabled [ 2.046264] fe650000.serial: ttyS1 at MMIO 0xfe650000 (irq = 27, base_baud = 1500000) is a 16550A [ 2.048018] fe660000.serial: ttyS2 at MMIO 0xfe660000 (irq = 28, base_baud = 1500000) is a 16550A [ 2.048423] printk: legacy console [ttyS2] enabled [ 2.182351] Serial: AMBA driver [ 2.186765] rockchip-vop2 fe040000.vop: Adding to iommu group 0 [ 2.202667] loop: module loaded [ 2.209615] tun: Universal TUN/TAP device driver, 1.6 [ 2.211368] thunder_xcv, ver 1.0 [ 2.211725] thunder_bgx, ver 1.0 [ 2.212070] nicpf, ver 1.0 [ 2.213259] e1000e: Intel(R) PRO/1000 Network Driver [ 2.213721] e1000e: Copyright(c) 1999 - 2015 Intel Corporation. [ 2.214304] igb: Intel(R) Gigabit Ethernet Network Driver [ 2.214801] igb: Copyright (c) 2007-2014 Intel Corporation. [ 2.215351] igbvf: Intel(R) Gigabit Virtual Function Network Driver [ 2.215923] igbvf: Copyright (c) 2009 - 2012 Intel Corporation. [ 2.216728] sky2: driver version 1.30 [ 2.228020] xhci-hcd xhci-hcd.0.auto: xHCI Host Controller [ 2.228621] xhci-hcd xhci-hcd.0.auto: new USB bus registered, assigned bus number 1 [ 2.229512] xhci-hcd xhci-hcd.0.auto: USB3 root hub has no ports [ 2.229532] ehci-platform fd800000.usb: EHCI Host Controller [ 2.229553] ohci-platform fd840000.usb: Generic Platform OHCI controller [ 2.229565] ehci-platform fd800000.usb: new USB bus registered, assigned bus number 2 [ 2.229652] ehci-platform fd880000.usb: EHCI Host Controller [ 2.229687] ehci-platform fd880000.usb: new USB bus registered, assigned bus number 3 [ 2.229726] ehci-platform fd800000.usb: irq 34, io mem 0xfd800000 [ 2.229771] ohci-platform fd8c0000.usb: Generic Platform OHCI controller [ 2.229800] ohci-platform fd8c0000.usb: new USB bus registered, assigned bus number 4 [ 2.229859] ehci-platform fd880000.usb: irq 35, io mem 0xfd880000 [ 2.229944] ohci-platform fd8c0000.usb: irq 37, io mem 0xfd8c0000 [ 2.230074] xhci-hcd xhci-hcd.0.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010 [ 2.230111] ohci-platform fd840000.usb: new USB bus registered, assigned bus number 5 [ 2.230643] xhci-hcd xhci-hcd.0.auto: irq 32, io mem 0xfcc00000 [ 2.231347] ohci-platform fd840000.usb: irq 36, io mem 0xfd840000 [ 2.232403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 2.239417] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.240116] usb usb1: Product: xHCI Host Controller [ 2.240572] usb usb1: Manufacturer: Linux 6.10.6-edge-rockchip64 xhci-hcd [ 2.241189] usb usb1: SerialNumber: xhci-hcd.0.auto [ 2.242456] hub 1-0:1.0: USB hub found [ 2.242868] hub 1-0:1.0: 1 port detected [ 2.243985] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.244145] ehci-platform fd800000.usb: USB 2.0 started, EHCI 1.00 [ 2.244550] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 6 [ 2.245589] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 2.245950] xhci-hcd xhci-hcd.1.auto: hcc params 0x0220fe64 hci version 0x110 quirks 0x0000008002000010 [ 2.246498] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.246584] xhci-hcd xhci-hcd.1.auto: irq 33, io mem 0xfd000000 [ 2.247356] usb usb2: Product: EHCI Host Controller [ 2.247605] xhci-hcd xhci-hcd.1.auto: xHCI Host Controller [ 2.248019] usb usb2: Manufacturer: Linux 6.10.6-edge-rockchip64 ehci_hcd [ 2.250114] usb usb2: SerialNumber: fd800000.usb [ 2.251408] hub 2-0:1.0: USB hub found [ 2.251852] hub 2-0:1.0: 1 port detected [ 2.252867] xhci-hcd xhci-hcd.1.auto: new USB bus registered, assigned bus number 7 [ 2.253587] xhci-hcd xhci-hcd.1.auto: Host supports USB 3.0 SuperSpeed [ 2.254455] usb usb6: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 2.255215] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.255874] usb usb6: Product: xHCI Host Controller [ 2.256353] usb usb6: Manufacturer: Linux 6.10.6-edge-rockchip64 xhci-hcd [ 2.256976] usb usb6: SerialNumber: xhci-hcd.1.auto [ 2.258120] hub 6-0:1.0: USB hub found [ 2.258530] hub 6-0:1.0: 1 port detected [ 2.259480] usb usb7: We don't know the algorithms for LPM for this host, disabling LPM. [ 2.260140] ehci-platform fd880000.usb: USB 2.0 started, EHCI 1.00 [ 2.260463] usb usb7: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.10 [ 2.261529] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.262190] usb usb7: Product: xHCI Host Controller [ 2.262639] usb usb7: Manufacturer: Linux 6.10.6-edge-rockchip64 xhci-hcd [ 2.263256] usb usb7: SerialNumber: xhci-hcd.1.auto [ 2.264544] hub 7-0:1.0: USB hub found [ 2.264954] hub 7-0:1.0: 1 port detected [ 2.265963] usbcore: registered new interface driver usb-storage [ 2.266305] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.10 [ 2.267269] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.267927] usb usb3: Product: EHCI Host Controller [ 2.268402] usb usb3: Manufacturer: Linux 6.10.6-edge-rockchip64 ehci_hcd [ 2.269022] usb usb3: SerialNumber: fd880000.usb [ 2.269615] mousedev: PS/2 mouse device common for all mice [ 2.270193] hub 3-0:1.0: USB hub found [ 2.270640] hub 3-0:1.0: 1 port detected [ 2.271454] i2c_dev: i2c /dev entries driver [ 2.273496] syr837: mapping for mode 1 not defined [ 2.273826] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_rst [ 2.274845] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_pwrdn [ 2.275039] fan53555-regulator 0-0040: FAN53555 Option[8] Rev[1] Detected! [ 2.275756] i2c 0-0020: Fixed dependency cycle(s) with /i2c@fdd40000/pmic@20/pinctrl_rk8xx/rk817_slppin_slp [ 2.292686] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.293473] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.294134] usb usb4: Product: Generic Platform OHCI controller [ 2.294674] usb usb4: Manufacturer: Linux 6.10.6-edge-rockchip64 ohci_hcd [ 2.295288] usb usb4: SerialNumber: fd8c0000.usb [ 2.296619] hub 4-0:1.0: USB hub found [ 2.297135] hub 4-0:1.0: 1 port detected [ 2.298435] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.10 [ 2.299199] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.299860] usb usb5: Product: Generic Platform OHCI controller [ 2.300457] usb usb5: Manufacturer: Linux 6.10.6-edge-rockchip64 ohci_hcd [ 2.301079] usb usb5: SerialNumber: fd840000.usb [ 2.302181] hub 5-0:1.0: USB hub found [ 2.302591] hub 5-0:1.0: 1 port detected [ 2.363720] rk808-regulator rk808-regulator.3.auto: there is no dvs0 gpio [ 2.364427] rk808-regulator rk808-regulator.3.auto: there is no dvs1 gpio [ 2.365056] rk808-regulator rk808-regulator.3.auto: max buck steps per change: 8 [ 2.386671] vdda0v9_image: Bringing 600000uV into 900000-900000uV [ 2.400793] vccio_acodec: Bringing 3300000uV into 3000000-3000000uV [ 2.422973] vcca1v8_image: Bringing 600000uV into 1800000-1800000uV [ 2.439280] input: rk805 pwrkey as /devices/platform/fdd40000.i2c/i2c-0/0-0020/rk805-pwrkey.4.auto/input/input0 [ 2.452442] rk808-rtc rk808-rtc.5.auto: registered as rtc0 [ 2.455662] rk808-rtc rk808-rtc.5.auto: setting system clock to 2017-08-05T09:00:10 UTC (1501923610) [ 2.461745] rockchip-thermal fe710000.tsadc: Missing tshut mode property, using default (gpio) [ 2.462566] rockchip-thermal fe710000.tsadc: Missing tshut-polarity property, using default (low) [ 2.468937] sdhci: Secure Digital Host Controller Interface driver [ 2.469529] sdhci: Copyright(c) Pierre Ossman [ 2.469977] Synopsys Designware Multimedia Card Interface Driver [ 2.471581] sdhci-pltfm: SDHCI platform and OF driver helper [ 2.473348] dwmmc_rockchip fe2c0000.mmc: IDMAC supports 32-bit address mode. [ 2.473657] dwmmc_rockchip fe2b0000.mmc: IDMAC supports 32-bit address mode. [ 2.474064] dwmmc_rockchip fe2c0000.mmc: Using internal DMA controller. [ 2.474692] dwmmc_rockchip fe2b0000.mmc: Using internal DMA controller. [ 2.475271] dwmmc_rockchip fe2c0000.mmc: Version ID is 270a [ 2.475294] dwmmc_rockchip fe2b0000.mmc: Version ID is 270a [ 2.475371] dwmmc_rockchip fe2b0000.mmc: DW MMC controller at irq 68,32 bit host data width,256 deep fifo [ 2.475935] dwmmc_rockchip fe2c0000.mmc: DW MMC controller at irq 67,32 bit host data width,256 deep fifo [ 2.479259] dwmmc_rockchip fe2c0000.mmc: allocated mmc-pwrseq [ 2.479855] mmc_host mmc2: card is non-removable. [ 2.488257] ledtrig-cpu: registered to indicate activity on CPUs [ 2.489907] scmi_protocol scmi_dev.1: Enabled polling mode TX channel - prot_id:16 [ 2.491147] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 2.491843] arm-scmi firmware:scmi: SCMI Protocol v2.0 'rockchip:' Firmware version 0x0 [ 2.492341] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.495049] SMCCC: SOC_ID: ARCH_SOC_ID not implemented, skipping .... [ 2.496002] hid: raw HID events driver (C) Jiri Kosina [ 2.496641] usb 1-1: new low-speed USB device number 2 using xhci-hcd [ 2.497596] usbcore: registered new interface driver usbhid [ 2.498194] usbhid: USB HID core driver [ 2.501200] rockchip-dfi fe230000.dfi: dfi initialized, dram type: 0x8, channels: 1 [ 2.506348] hw perfevents: enabled with armv8_cortex_a55 PMU driver, 7 counters available [ 2.509121] mmc0: SDHCI controller on fe310000.mmc [fe310000.mmc] using ADMA [ 2.509428] drop_monitor: Initializing network drop monitor service [ 2.510773] NET: Registered PF_INET6 protocol family [ 2.512207] usb 6-1: new low-speed USB device number 2 using xhci-hcd [ 2.572195] Segment Routing with IPv6 [ 2.572679] In-situ OAM (IOAM) with IPv6 [ 2.573173] NET: Registered PF_PACKET protocol family [ 2.574026] 8021q: 802.1Q VLAN Support v1.8 [ 2.574629] Key type dns_resolver registered [ 2.590021] Timer migration: 1 hierarchy levels; 8 children per group; 1 crossnode level [ 2.591214] registered taskstats version 1 [ 2.591907] Loading compiled-in X.509 certificates [ 2.599694] mmc_host mmc1: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 2.602446] dwmmc_rockchip fe2b0000.mmc: All phases bad! [ 2.602956] mmc1: tuning execution failed: -5 [ 2.603367] mmc1: error -5 whilst initialising SD card [ 2.625099] zswap: loaded using pool zstd/z3fold [ 2.625842] Demotion targets for Node 0: null [ 2.626525] Key type .fscrypt registered [ 2.626897] Key type fscrypt-provisioning registered [ 2.631092] Btrfs loaded, zoned=yes, fsverity=yes [ 2.631814] Key type encrypted registered [ 2.632244] mmc_host mmc1: Bus speed (slot 0) = 375000Hz (slot req 375000Hz, actual 375000HZ div = 0) [ 2.632259] AppArmor: AppArmor sha256 policy hashing enabled [ 2.648584] usb 1-1: New USB device found, idVendor=045e, idProduct=00cb, bcdDevice= 1.04 [ 2.649373] usb 1-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 2.650025] usb 1-1: Product: Microsoft Basic Optical Mouse v2.0 [ 2.650583] usb 1-1: Manufacturer: Microsoft [ 2.668716] input: Microsoft Microsoft Basic Optical Mouse v2.0 as /devices/platform/fcc00000.usb/xhci-hcd.0.auto/usb1/1-1/1-1:1.0/0003:045E:00CB.0001/input/input1 [ 2.670286] usb 6-1: New USB device found, idVendor=04f3, idProduct=0103, bcdDevice= 1.07 [ 2.671062] usb 6-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 2.672748] hid-generic 0003:045E:00CB.0001: input,hidraw0: USB HID v1.11 Mouse [Microsoft Microsoft Basic Optical Mouse v2.0 ] on usb-xhci-hcd.0.auto-1/input0 [ 2.681544] rockchip-drm display-subsystem: bound fe040000.vop (ops 0xffffa2b090e3c440) [ 2.683904] dwhdmi-rockchip fe0a0000.hdmi: Detected HDMI TX controller v2.11a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.685897] dwhdmi-rockchip fe0a0000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.687132] rockchip-drm display-subsystem: bound fe0a0000.hdmi (ops 0xffffa2b090e41910) [ 2.689120] [drm] Initialized rockchip 1.0.0 20140818 for display-subsystem on minor 0 [ 2.700181] mmc_host mmc2: Bus speed (slot 0) = 375000Hz (slot req 400000Hz, actual 375000HZ div = 0) [ 2.700652] input: HID 04f3:0103 as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb6/6-1/6-1:1.0/0003:04F3:0103.0002/input/input2 [ 2.702919] hid-generic 0003:04F3:0103.0002: input,hidraw1: USB HID v1.10 Keyboard [HID 04f3:0103] on usb-xhci-hcd.1.auto-1/input0 [ 2.709790] input: HID 04f3:0103 Consumer Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb6/6-1/6-1:1.1/0003:04F3:0103.0003/input/input3 [ 2.711445] input: HID 04f3:0103 System Control as /devices/platform/fd000000.usb/xhci-hcd.1.auto/usb6/6-1/6-1:1.1/0003:04F3:0103.0003/input/input4 [ 2.713104] hid-generic 0003:04F3:0103.0003: input,hidraw2: USB HID v1.10 Device [HID 04f3:0103] on usb-xhci-hcd.1.auto-1/input1 [ 2.715004] mmc0: Failed to initialize a non-removable card [ 2.730963] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 50000000Hz, actual 50000000HZ div = 0) [ 2.732477] mmc1: new high speed SDHC card at address b36b [ 2.734272] mmcblk1: mmc1:b36b SDABC 29.3 GiB [ 2.742257] GPT:Primary header thinks Alt. header is not at the end of the disk. [ 2.742989] GPT:2285600 != 61447167 [ 2.743322] GPT:Alternate GPT header not at the end of the disk. [ 2.743903] GPT:2285600 != 61447167 [ 2.744278] GPT: Use GNU Parted to correct GPT errors. [ 2.744808] mmcblk1: p1 p2 [ 2.817955] mmc_host mmc2: Bus speed (slot 0) = 150000000Hz (slot req 150000000Hz, actual 150000000HZ div = 0) [ 2.927427] Console: switching to colour frame buffer device 160x45 [ 2.973600] rockchip-drm display-subsystem: [drm] fb0: rockchipdrmfb frame buffer device [ 2.975540] WCN: marlin_init entry! [ 2.976617] WCN: marlin_parse_dt chip_en gpio=27 [ 2.977305] WCN_ERR: gpio chip_en request err: 27 [ 2.978076] WCN: marlin_parse_dt reset gpio=79 [ 2.978750] WCN: wcn config keep power on [ 2.979329] WCN: wcn config bt wake host [ 2.979908] WCN: marlin_parse_dt bt-wake-host-gpio=80 [ 2.981507] sdiohal:sdiohal_parse_dt adma_tx:0, adma_rx:0, pwrseq:0, irq type:gpio, gpio_num:81, blksize:512 [ 2.982964] sdiohal:not config sdio host node. [ 2.987013] sdiohal:sdiohal_init ok [ 2.989340] WCN: marlin_probe ok! [ 2.990486] of_cfs_init [ 2.990921] of_cfs_init: OK [ 2.991581] clk: Disabling unused clocks [ 2.993121] PM: genpd: Disabling unused power domains [ 2.996748] Freeing unused kernel memory: 4928K [ 3.007968] Run /init as init process [ 3.072760] dwmmc_rockchip fe2c0000.mmc: Successfully tuned phase to 215 [ 3.089146] mmc2: new ultra high speed SDR104 SDIO card at address 0001 [ 4.050633] rk_gmac-dwmac fe010000.ethernet: IRQ eth_lpi not found [ 4.073862] rk_gmac-dwmac fe010000.ethernet: IRQ sfty not found [ 4.096008] rk_gmac-dwmac fe010000.ethernet: supply phy not found, using dummy regulator [ 4.107265] rk_gmac-dwmac fe010000.ethernet: clock input or output? (input). [ 4.129309] rk_gmac-dwmac fe010000.ethernet: TX delay(0x30). [ 4.139659] rk_gmac-dwmac fe010000.ethernet: RX delay(0x10). [ 4.150550] rk_gmac-dwmac fe010000.ethernet: integrated PHY? (no). [ 4.161519] rk_gmac-dwmac fe010000.ethernet: clock input from PHY [ 4.176952] rk_gmac-dwmac fe010000.ethernet: init for RGMII [ 4.188417] rk_gmac-dwmac fe010000.ethernet: User ID: 0x30, Synopsys ID: 0x51 [ 4.198819] rk_gmac-dwmac fe010000.ethernet: DWMAC4/5 [ 4.208334] rk_gmac-dwmac fe010000.ethernet: DMA HW capability register supported [ 4.218143] rk_gmac-dwmac fe010000.ethernet: RX Checksum Offload Engine supported [ 4.228257] rk_gmac-dwmac fe010000.ethernet: TX Checksum insertion supported [ 4.238421] rk_gmac-dwmac fe010000.ethernet: Wake-Up On Lan supported [ 4.248307] rk_gmac-dwmac fe010000.ethernet: TSO supported [ 4.257938] rk_gmac-dwmac fe010000.ethernet: Enable RX Mitigation via HW Watchdog Timer [ 4.269353] rk_gmac-dwmac fe010000.ethernet: Enabled RFS Flow TC (entries=10) [ 4.286011] rk_gmac-dwmac fe010000.ethernet: TSO feature enabled [ 4.295804] rk_gmac-dwmac fe010000.ethernet: Using 32/32 bits DMA host/device width [ 7.830764] EXT4-fs (mmcblk1p1): mounted filesystem c78c2951-8532-48d3-9a20-3fd4a972501f ro with ordered data mode. Quota mode: none. [ 8.730132] systemd[1]: System time before build time, advancing clock. [ 8.833388] systemd[1]: Inserted module 'autofs4' [ 8.938300] systemd[1]: systemd 252.31-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 8.976457] systemd[1]: Detected architecture arm64. [ 9.029054] systemd[1]: Hostname set to . [ 9.280302] dw-apb-uart fe660000.serial: forbid DMA for kernel console [ 9.866504] systemd[1]: Queued start job for default target graphical.target. [ 9.935284] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 9.964983] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 9.994429] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 10.023973] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 10.054409] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 10.087317] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 10.120444] systemd[1]: Expecting device dev-ttyS2.device - /dev/ttyS2... [ 10.153605] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 10.187444] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 10.222429] systemd[1]: Reached target paths.target - Path Units. [ 10.256914] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 10.291635] systemd[1]: Reached target slices.target - Slice Units. [ 10.326494] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 10.362154] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 10.397310] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 10.436674] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 10.475302] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 10.511729] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 10.549978] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 10.587784] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 10.624929] systemd[1]: Reached target sockets.target - Socket Units. [ 10.700731] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 10.747784] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 10.795377] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 10.864704] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 10.913143] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 10.985193] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 11.030347] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 11.097137] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 11.146367] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 11.203471] device-mapper: uevent: version 1.0.3 [ 11.221419] device-mapper: ioctl: 4.48.0-ioctl (2023-03-01) initialised: dm-devel@lists.linux.dev [ 11.241598] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 11.284555] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 11.331119] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 11.366275] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 11.433174] systemd[1]: Starting systemd-journald.service - Journal Service... [ 11.492882] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 11.561247] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 11.616347] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 11.671465] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 11.680345] EXT4-fs (mmcblk1p1): re-mounted c78c2951-8532-48d3-9a20-3fd4a972501f r/w. Quota mode: none. [ 11.717072] cfg80211: Loading compiled-in X.509 certificates for regulatory database [ 11.755300] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 11.769360] Loaded X.509 cert 'sforshee: 00b28ddf47aef9cea7' [ 11.792497] Loaded X.509 cert 'wens: 61c038651aabdcf94bd0ac7ff06c7248db18c600' [ 11.827246] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 11.849117] WCN: start_marlin [MARLIN_WIFI] [ 11.849147] WCN: marlin power state:0, subsys: [MARLIN_WIFI] power 1 [ 11.849157] WCN: the first power on start [ 11.880256] sdiohal:sdiohal_scan_card [ 11.931092] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 11.966971] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 12.006879] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 12.046513] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 12.086440] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 12.106023] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 12.146470] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 12.164856] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 12.199718] systemd[1]: Started systemd-journald.service - Journal Service. [ 13.358218] FAT-fs (mmcblk1p2): Volume was not properly unmounted. Some data may be corrupt. Please run fsck. [ 14.447589] mc: Linux media interface: v0.10 [ 14.531811] videodev: Linux video capture interface: v2.00 [ 14.577240] panfrost fde60000.gpu: clock rate = 594000000 [ 14.585667] panfrost fde60000.gpu: bus_clock rate = 500000000 [ 14.593989] sdiohal err:wait scan card time out [ 14.620980] panfrost fde60000.gpu: mali-g52 id 0x7402 major 0x1 minor 0x0 status 0x0 [ 14.629381] panfrost fde60000.gpu: features: 00000000,00000cf7, issues: 00000000,00000400 [ 14.636495] panfrost fde60000.gpu: Features: L2:0x07110206 Shader:0x00000002 Tiler:0x00000209 Mem:0x1 MMU:0x00002823 AS:0xff JS:0x7 [ 14.644453] panfrost fde60000.gpu: shader_present=0x1 l2_present=0x1 [ 14.670560] rockchip_vdec2: module is from the staging directory, the quality is unknown, you have been warned. [ 14.700775] rk2-crypto fe380000.crypto: will run requests pump with realtime priority [ 14.709372] rk2-crypto fe380000.crypto: Registers crypto algos [ 14.716608] rk2-crypto fe380000.crypto: Register ecb(aes) as ecb-aes-rk2 [ 14.724223] rk2-crypto fe380000.crypto: Register cbc(aes) as cbc-aes-rk2 [ 14.731576] rk2-crypto fe380000.crypto: Register xts(aes) as xts-aes-rk2 [ 14.738958] rk2-crypto fe380000.crypto: Register md5 as rk2-md5 3 [ 14.741060] rockchip-rga fdeb0000.rga: HW Version: 0x03.02 [ 14.745225] rk2-crypto fe380000.crypto: Register sha1 as rk2-sha1 4 [ 14.759694] rk2-crypto fe380000.crypto: Register sha256 as rk2-sha256 5 [ 14.766620] rk2-crypto fe380000.crypto: Register sha384 as rk2-sha384 6 [ 14.773950] rk2-crypto fe380000.crypto: Register sha512 as rk2-sha512 7 [ 14.780853] rk2-crypto fe380000.crypto: Register sm3 as rk2-sm3 8 [ 14.794491] hantro-vpu fdea0000.video-codec: Adding to iommu group 1 [ 14.801199] [drm] Initialized panfrost 1.2.0 20180908 for fde60000.gpu on minor 1 [ 14.823491] rockchip-rga fdeb0000.rga: Registered rockchip-rga as /dev/video1 [ 14.827326] hantro-vpu fdea0000.video-codec: registered rockchip,rk3328-vpu-dec as /dev/video2 [ 14.885788] hantro-vpu fdee0000.video-codec: Adding to iommu group 2 [ 14.914855] hantro-vpu fdee0000.video-codec: registered rockchip,rk3568-vepu-enc as /dev/video3 [ 14.957370] brcmfmac: brcmf_fw_alloc_request: using brcm/brcmfmac43456-sdio for chip BCM4345/9 [ 14.987818] brcmfmac mmc2:0001:1: Direct firmware load for brcm/brcmfmac43456-sdio.rockchip,rk3566-orangepi-3b.bin failed with error -2 [ 15.032954] usbcore: registered new interface driver brcmfmac [ 15.072177] random: crng init done [ 15.179447] Bluetooth: Core ver 2.22 [ 15.179674] NET: Registered PF_BLUETOOTH protocol family [ 15.179682] Bluetooth: HCI device and connection manager initialized [ 15.179706] Bluetooth: HCI socket layer initialized [ 15.179720] Bluetooth: L2CAP socket layer initialized [ 15.179776] Bluetooth: SCO socket layer initialized [ 15.215976] brcmfmac: brcmf_c_process_txcap_blob: no txcap_blob available (err=-2) [ 15.217294] brcmfmac: brcmf_c_preinit_dcmds: Firmware: BCM4345/9 wl0: Jun 16 2017 12:38:26 version 7.45.96.2 (66c4e21@sh-git) (r) FWID 01-1813af84 [ 15.991448] EXT4-fs (mmcblk1p1): resizing filesystem from 281344 to 7676795 blocks [ 16.594059] EXT4-fs (mmcblk1p1): resized filesystem to 7676795 [ 17.636205] WCN_ERR: wait SDIO rescan card time out [ 17.648265] WCN_ERR: chip power on fail [ 17.653834] sdiohal:sdiohal_runtime_put entry [ 17.658321] sdiohal err:sdiohal_runtime_put line 1756 not have card [ 17.681882] systemd-journald[290]: Received client request to flush runtime journal. [ 17.692941] sprdwl:__sprdwl_cmd_getbuf cant't get vif, ctx_id: 0 [ 17.698588] sdiohal err:sdiohal_tx_thread line 152 not have card [ 20.708281] sprdwl:[WIFI_CMD_SYNC_VERSION]timeout [ 20.724377] sprdwl:ctx_id:0 cmd: WIFI_CMD_SYNC_VERSION[9] rsp timeout (mstime = 17690), num=1 [ 20.739111] sprdwl:SYNC CMD ERROR!! [ 20.749667] sprdwl:sprdwl_tx_deinit cmd not yet transmited, cmd_send:1, cmd_poped:0 [ 30.092807] sprdwl:sprdwl_msg_deinit ref not ok! wait for pop! [ 33.140471] unisoc_wifi unisoc_wifi: probe with driver unisoc_wifi failed with error -1 Debian GNU/Linux 12 DietPi ttyS2 DietPi login: