[    0.000000] Booting Linux on physical CPU 0x100
[    0.000000] Linux version 6.1.63-current-odroidxu4 (armbian@next) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Tue Nov  7 20:10:43 UTC 2023
[    0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d
[    0.000000] CPU: div instructions available: patching division code
[    0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache
[    0.000000] OF: fdt: Machine model: Hardkernel ODROID XU4
[    0.000000] Memory policy: Data cache writealloc
[    0.000000] cma: Reserved 128 MiB at 0xb6800000
[    0.000000] Samsung CPU ID: 0xe5422001
[    0.000000] Zone ranges:
[    0.000000]   Normal   [mem 0x0000000040000000-0x000000006fffffff]
[    0.000000]   HighMem  [mem 0x0000000070000000-0x00000000be9fffff]
[    0.000000] Movable zone start for each node
[    0.000000] Early memory node ranges
[    0.000000]   node   0: [mem 0x0000000040000000-0x00000000be9fffff]
[    0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000be9fffff]
[    0.000000] Running under secure firmware.
[    0.000000] percpu: Embedded 17 pages/cpu s39572 r8192 d21868 u69632
[    0.000000] pcpu-alloc: s39572 r8192 d21868 u69632 alloc=17*4096
[    0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 
[    0.000000] Built 1 zonelists, mobility grouping on.  Total pages: 516928
[    0.000000] Kernel command line: root=UUID=28df4aa5-7f57-4a7c-9883-f1aebb513bb4 rootfstype=ext4 rootwait ro console=ttySAC2,115200n8 console=tty1 consoleblank=0 net.ifnames=0  smsc95xx.macaddr=00:1e:06:61:7a:72 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi 
[    0.000000] hdmi: using HDMI mode
[    0.000000] Unknown kernel command line parameters "governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi", will be passed to user space.
[    0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear)
[    0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off
[    0.000000] Memory: 1895512K/2074624K available (12288K kernel code, 1358K rwdata, 3444K rodata, 1024K init, 359K bss, 48040K reserved, 131072K cma-reserved, 1157120K highmem)
[    0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[    0.000000] trace event string verifier disabled
[    0.000000] rcu: Preemptible hierarchical RCU implementation.
[    0.000000] 	Trampoline variant of Tasks RCU enabled.
[    0.000000] 	Tracing variant of Tasks RCU enabled.
[    0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies.
[    0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16
[    0.000000] GIC: Using split EOI/Deactivate mode
[    0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention.
[    0.000000] Switching to timer-based delay loop, resolution 41ns
[    0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns
[    0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns
[    0.000030] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57
[    0.001502] arch_timer: cp15 timer(s) running at 24.00MHz (phys).
[    0.001524] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns
[    0.001545] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns
[    0.001562] Ignoring duplicate/late registration of read_current_timer delay
[    0.002347] Console: colour dummy device 80x30
[    0.003140] printk: console [tty1] enabled
[    0.003202] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000)
[    0.003251] CPU: Testing write buffer coherency: ok
[    0.003347] pid_max: default: 32768 minimum: 301
[    0.003497] LSM: Security Framework initializing
[    0.003555] Yama: becoming mindful.
[    0.003792] AppArmor: AppArmor initialized
[    0.003970] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.004025] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear)
[    0.006072] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100
[    0.007676] cblist_init_generic: Setting adjustable number of callback queues.
[    0.007725] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.007940] cblist_init_generic: Setting adjustable number of callback queues.
[    0.007976] cblist_init_generic: Setting shift to 3 and lim to 1.
[    0.008262] Setting up static identity map for 0x40100000 - 0x40100060
[    0.008601] ARM CCI driver probed
[    0.009185] Exynos MCPM support installed
[    0.009627] rcu: Hierarchical SRCU implementation.
[    0.009654] rcu: 	Max phase no-delay instances is 1000.
[    0.011744] smp: Bringing up secondary CPUs ...
[    0.013127] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101
[    0.014620] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102
[    0.015998] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103
[    0.017486] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000
[    0.017503] CPU4: detected I-Cache line size mismatch, workaround enabled
[    0.017511] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.017602] CPU4: Spectre BHB: enabling loop workaround for all CPUs
[    0.019109] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001
[    0.019122] CPU5: detected I-Cache line size mismatch, workaround enabled
[    0.019130] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.020868] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002
[    0.020882] CPU6: detected I-Cache line size mismatch, workaround enabled
[    0.020889] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.022370] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003
[    0.022384] CPU7: detected I-Cache line size mismatch, workaround enabled
[    0.022392] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable
[    0.022639] smp: Brought up 1 node, 8 CPUs
[    0.022705] SMP: Total of 8 processors activated (384.00 BogoMIPS).
[    0.022734] CPU: All CPU(s) started in HYP mode.
[    0.022755] CPU: Virtualization extensions available.
[    0.024390] devtmpfs: initialized
[    0.046620] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0
[    0.046896] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns
[    0.046975] futex hash table entries: 2048 (order: 5, 131072 bytes, linear)
[    0.049703] pinctrl core: initialized pinctrl subsystem
[    0.052650] NET: Registered PF_NETLINK/PF_ROUTE protocol family
[    0.060767] DMA: preallocated 2048 KiB pool for atomic coherent allocations
[    0.062453] audit: initializing netlink subsys (disabled)
[    0.062761] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1
[    0.063366] thermal_sys: Registered thermal governor 'step_wise'
[    0.063661] cpuidle: using governor menu
[    0.064475] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers.
[    0.064507] hw-breakpoint: maximum watchpoint size is 8 bytes.
[    0.179012] EXYNOS5420 PMU initialized
[    0.407654] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible.
[    0.409449] cryptd: max_cpu_qlen set to 1000
[    0.579964] raid6: neonx8   gen()  1464 MB/s
[    0.749959] raid6: neonx4   gen()  2096 MB/s
[    0.919963] raid6: neonx2   gen()  1873 MB/s
[    1.089964] raid6: neonx1   gen()  1515 MB/s
[    1.260011] raid6: int32x8  gen()   447 MB/s
[    1.429977] raid6: int32x4  gen()   528 MB/s
[    1.599974] raid6: int32x2  gen()   461 MB/s
[    1.770008] raid6: int32x1  gen()   440 MB/s
[    1.770027] raid6: using algorithm neonx4 gen() 2096 MB/s
[    1.939973] raid6: .... xor() 1389 MB/s, rmw enabled
[    1.939995] raid6: using neon recovery algorithm
[    1.942072] iommu: Default domain type: Translated 
[    1.942097] iommu: DMA domain TLB invalidation policy: strict mode 
[    1.942522] usbcore: registered new interface driver usbfs
[    1.942596] usbcore: registered new interface driver hub
[    1.942666] usbcore: registered new device driver usb
[    1.943380] s3c-i2c 12c80000.i2c: slave address 0x00
[    1.943410] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz
[    1.943753] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter
[    1.944243] mc: Linux media interface: v0.10
[    1.944322] videodev: Linux video capture interface: v2.00
[    1.944894] Advanced Linux Sound Architecture Driver Initialized.
[    1.945551] NetLabel: Initializing
[    1.945573] NetLabel:  domain hash size = 128
[    1.945590] NetLabel:  protocols = UNLABELED CIPSOv4 CALIPSO
[    1.945691] NetLabel:  unlabeled traffic allowed by default
[    1.946440] clocksource: Switched to clocksource mct-frc
[    2.012833] VFS: Disk quotas dquot_6.6.0
[    2.012937] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[    2.013886] AppArmor: AppArmor Filesystem Enabled
[    2.029530] NET: Registered PF_INET protocol family
[    2.029808] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear)
[    2.031834] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear)
[    2.031983] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear)
[    2.032113] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear)
[    2.032253] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear)
[    2.032556] TCP: Hash tables configured (established 8192 bind 8192)
[    2.032705] UDP hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.032772] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear)
[    2.033039] NET: Registered PF_UNIX/PF_LOCAL protocol family
[    2.033407] Trying to unpack rootfs image as initramfs...
[    2.035413] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available
[    2.036710] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available
[    2.038868] Initialise system trusted keyrings
[    2.038976] Key type blacklist registered
[    2.039355] workingset: timestamp_bits=14 max_order=19 bucket_order=5
[    2.048985] squashfs: version 4.0 (2009/01/31) Phillip Lougher
[    2.050233] fuse: init (API version 7.37)
[    2.052113] integrity: Platform Keyring initialized
[    2.138267] xor: measuring software checksum speed
[    2.144212]    arm4regs        :  1665 MB/sec
[    2.151666]    8regs           :  1336 MB/sec
[    2.159138]    32regs          :  1325 MB/sec
[    2.163123]    neon            :  2504 MB/sec
[    2.163142] xor: using function: neon (2504 MB/sec)
[    2.163174] Key type asymmetric registered
[    2.163195] Asymmetric key parser 'x509' registered
[    2.602364] Freeing initrd memory: 8964K
[    2.636658] alg: self-tests for CTR-KDF (hmac(sha256)) passed
[    2.637015] bounce: pool size: 64 pages
[    2.637185] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248)
[    2.637474] io scheduler mq-deadline registered
[    2.637499] io scheduler kyber registered
[    2.637742] io scheduler bfq registered
[    2.639542] samsung-pinctrl 13400000.pinctrl: Failed to create device link (0x180) with soc
[    2.641832] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator
[    2.642845] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator
[    2.643031] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator
[    2.643452] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator
[    2.643637] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator
[    2.654455] dma-pl330 3880000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.654492] dma-pl330 3880000.dma-controller: 	DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6
[    2.657636] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.657669] dma-pl330 121a0000.dma-controller: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    2.660671] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.660703] dma-pl330 121b0000.dma-controller: 	DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32
[    2.661850] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330
[    2.661881] dma-pl330 10800000.dma-controller: 	DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32
[    2.676544] dma-pl330 3880000.dma-controller: PM domain MAU will not be powered off
[    2.745741] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[    2.748324] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 123, base_baud = 0) is a S3C6400/10
[    3.891941] printk: console [ttySAC2] enabled
[    3.898658] exynos-trng 10830600.rng: Exynos True Random Number Generator.
[    3.905690] exynos-mixer 14450000.mixer: Adding to iommu group 0
[    3.932688] brd: module loaded
[    3.935719] usbcore: registered new interface driver r8152
[    3.939837] usbcore: registered new interface driver cdc_ether
[    3.945584] usbcore: registered new interface driver cdc_subset
[    3.951535] usbcore: registered new interface driver r8153_ecm
[    3.960097] phy phy-12130000.phy.6: phy_power_on was called before phy_init
[    3.965597] exynos-ehci 12110000.usb: EHCI Host Controller
[    3.971104] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1
[    3.979233] exynos-ehci 12110000.usb: irq 124, io mem 0x12110000
[    4.006482] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00
[    4.011334] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    4.019302] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.026484] usb usb1: Product: EHCI Host Controller
[    4.031305] usb usb1: Manufacturer: Linux 6.1.63-current-odroidxu4 ehci_hcd
[    4.038267] usb usb1: SerialNumber: 12110000.usb
[    4.043586] hub 1-0:1.0: USB hub found
[    4.046641] hub 1-0:1.0: 3 ports detected
[    4.051865] phy phy-12130000.phy.6: phy_power_on was called before phy_init
[    4.057510] exynos-ohci 12120000.usb: USB Host Controller
[    4.062862] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2
[    4.070695] exynos-ohci 12120000.usb: irq 124, io mem 0x12120000
[    4.150771] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01
[    4.157689] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    4.164770] usb usb2: Product: USB Host Controller
[    4.169570] usb usb2: Manufacturer: Linux 6.1.63-current-odroidxu4 ohci_hcd
[    4.176499] usb usb2: SerialNumber: 12120000.usb
[    4.181771] hub 2-0:1.0: USB hub found
[    4.184827] hub 2-0:1.0: 3 ports detected
[    4.191295] mousedev: PS/2 mouse device common for all mice
[    4.197113] i2c_dev: i2c /dev entries driver
[    4.229127] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV
[    4.248920] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV
[    4.273065] vdd_sd: Bringing 3300000uV into 2800000-2800000uV
[    4.370432] s5m-rtc s2mps14-rtc: registered as rtc0
[    4.375711] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:10:55 UTC (946685455)
[    4.383054] s2mps11-clk s2mps11-clk: DMA mask not set
[    4.397070] exynos-tmu 10060000.tmu: More trip points than supported by this TMU.
[    4.403095] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode.
[    4.412988] exynos-tmu 10064000.tmu: More trip points than supported by this TMU.
[    4.419050] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode.
[    4.428924] exynos-tmu 10068000.tmu: More trip points than supported by this TMU.
[    4.434940] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode.
[    4.444892] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU.
[    4.450966] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode.
[    4.460791] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU.
[    4.466857] exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode.
[    4.476057] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled
[    4.483857] device-mapper: uevent: version 1.0.3
[    4.488128] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com
[    4.511544] sdhci: Secure Digital Host Controller Interface driver
[    4.516264] sdhci: Copyright(c) Pierre Ossman
[    4.521025] Synopsys Designware Multimedia Card Interface Driver
[    4.528139] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode.
[    4.528697] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode.
[    4.534151] s5p-secss 10830000.sss: s5p-sss driver registered
[    4.546304] dwmmc_exynos 12220000.mmc: Using internal DMA controller.
[    4.547682] hid: raw HID events driver (C) Jiri Kosina
[    4.552752] dwmmc_exynos 12200000.mmc: Using internal DMA controller.
[    4.553002] dwmmc_exynos 12220000.mmc: Version ID is 250a
[    4.553303] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 134,64 bit host data width,64 deep fifo
[    4.573742] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp
[    4.575421] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    4.578904] dwmmc_exynos 12200000.mmc: Version ID is 250a
[    4.585561] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp
[    4.594980] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 135,64 bit host data width,64 deep fifo
[    4.600391] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp
[    4.607648] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq
[    4.616313] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp
[    4.635245] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0-0)
[    4.641440] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63)
[    4.643622] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0-1)
[    4.655486] mmc_host mmc0: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0)
[    4.660905] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1-0)
[    4.674259] mmc0: new ultra high speed SDR104 SDXC card at address 0001
[    4.678766] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1-1)
[    4.686539] mmcblk0: mmc0:0001 SD256 118 GiB 
[    4.699197] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_0 not found
[    4.705637] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_1 not found
[    4.713777] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0
[    4.716612] usb 2-1: new low-speed USB device number 2 using exynos-ohci
[    4.732468] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s
[    4.740385] NET: Registered PF_PACKET protocol family
[    4.743971] NET: Registered PF_KEY protocol family
[    4.748862] Key type dns_resolver registered
[    4.753696] Registering SWP/SWPB emulation handler
[    4.758278] registered taskstats version 1
[    4.761863] Loading compiled-in X.509 certificates
[    4.767275] Key type .fscrypt registered
[    4.770514] Key type fscrypt-provisioning registered
[    4.778623] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes
[    4.832435] Key type encrypted registered
[    4.835034] AppArmor: AppArmor sha1 policy hashing enabled
[    4.899732]  mmcblk0: p1 p2
[    4.943437] exynos-chipid 10000000.chipid: cpu0 opp0, freq: 1500 missing
[    4.948742] exynos-chipid 10000000.chipid: cpu4 opp0, freq: 2100 missing
[    4.955380] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422000] REV[0x1] Detected
[    4.967203] OF: graph: no port node found in /soc/hdmi@14530000
[    4.972939] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations
[    4.979479] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0dc035c)
[    4.986067] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0dc093c)
[    5.019600] usb 2-1: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08
[    5.026505] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[    5.033542] usb 2-1: Product: Dell KB216 Wired Keyboard
[    5.187599] Console: switching to colour frame buffer device 210x65
[    5.219711] exynos-drm exynos-drm: [drm] fb0: exynosdrmfb frame buffer device
[    5.227790] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0
[    5.308938] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    5.313296] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3
[    5.324320] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    5.333362] xhci-hcd xhci-hcd.8.auto: irq 140, io mem 0x12000000
[    5.340343] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller
[    5.344807] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4
[    5.352476] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed
[    5.360230] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    5.367577] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.374712] usb usb3: Product: xHCI Host Controller
[    5.379609] usb usb3: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd
[    5.386599] usb usb3: SerialNumber: xhci-hcd.8.auto
[    5.393877] hub 3-0:1.0: USB hub found
[    5.396695] hub 3-0:1.0: 1 port detected
[    5.402744] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.410617] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    5.417979] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.425143] usb usb4: Product: xHCI Host Controller
[    5.430082] usb usb4: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd
[    5.436970] usb usb4: SerialNumber: xhci-hcd.8.auto
[    5.442186] hub 4-0:1.0: USB hub found
[    5.445527] hub 4-0:1.0: 1 port detected
[    5.517900] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    5.522080] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5
[    5.531553] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010
[    5.541989] xhci-hcd xhci-hcd.9.auto: irq 141, io mem 0x12400000
[    5.547469] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller
[    5.556367] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6
[    5.567777] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed
[    5.578228] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01
[    5.589896] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.600480] usb usb5: Product: xHCI Host Controller
[    5.608697] usb usb5: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd
[    5.619295] usb usb5: SerialNumber: xhci-hcd.9.auto
[    5.628901] hub 5-0:1.0: USB hub found
[    5.634192] hub 5-0:1.0: 1 port detected
[    5.638679] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM.
[    5.647068] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01
[    5.655519] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[    5.662981] usb usb6: Product: xHCI Host Controller
[    5.668161] usb usb6: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd
[    5.675337] usb usb6: SerialNumber: xhci-hcd.9.auto
[    5.680864] hub 6-0:1.0: USB hub found
[    5.684825] hub 6-0:1.0: 1 port detected
[    5.686478] usb 3-1: new high-speed USB device number 2 using xhci-hcd
[    5.696951] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling
[    5.702804] rtc rtc1: invalid alarm value: 1900-01-01T00:00:00
[    5.708960] s3c-rtc 101e0000.rtc: registered as rtc1
[    5.716210] exynos-bus: new bus device registered: soc:bus-wcore ( 88700 KHz ~ 532000 KHz)
[    5.725317] exynos-bus: new bus device registered: soc:bus-noc ( 66600 KHz ~ 111000 KHz)
[    5.734064] exynos-bus: new bus device registered: soc:bus-fsys-apb (111000 KHz ~ 222000 KHz)
[    5.743283] exynos-bus: new bus device registered: soc:bus-fsys2 ( 75000 KHz ~ 200000 KHz)
[    5.752390] exynos-bus: new bus device registered: soc:bus-mfc ( 83250 KHz ~ 333000 KHz)
[    5.761227] exynos-bus: new bus device registered: soc:bus-gen ( 88700 KHz ~ 266000 KHz)
[    5.769832] exynos-bus: new bus device registered: soc:bus-peri ( 66600 KHz ~  66600 KHz)
[    5.778823] exynos-bus: new bus device registered: soc:bus-g2d ( 83250 KHz ~ 333000 KHz)
[    5.787696] exynos-bus: new bus device registered: soc:bus-g2d-acp ( 66500 KHz ~ 266000 KHz)
[    5.796916] exynos-bus: new bus device registered: soc:bus-jpeg ( 75000 KHz ~ 300000 KHz)
[    5.805852] exynos-bus: new bus device registered: soc:bus-jpeg-apb ( 83250 KHz ~ 166500 KHz)
[    5.814945] exynos-bus: new bus device registered: soc:bus-disp1-fimd (120000 KHz ~ 200000 KHz)
[    5.824257] exynos-bus: new bus device registered: soc:bus-disp1 (120000 KHz ~ 300000 KHz)
[    5.833098] exynos-bus: new bus device registered: soc:bus-gscl-scaler (150000 KHz ~ 300000 KHz)
[    5.842636] exynos-bus: new bus device registered: soc:bus-mscl ( 84000 KHz ~ 666000 KHz)
[    5.871394] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23
[    5.879695] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    5.886890] usb 3-1: Product: USB2.0 Hub
[    5.890841] usb 3-1: Manufacturer: GenesysLogic
[    5.915229] ALSA device list:
[    5.918407]   #0: ODROID-XU4
[    5.922380] Freeing unused kernel image (initmem) memory: 1024K
[    5.935432] hub 3-1:1.0: USB hub found
[    5.939712] hub 3-1:1.0: 2 ports detected
[    5.987704] Run /init as init process
[    5.995509]   with arguments:
[    5.995538]     /init
[    5.995563]   with environment:
[    5.995587]     HOME=/
[    5.995611]     TERM=linux
[    5.995634]     governor=performance
[    5.995656]     hdmi_tx_amp_lvl=31
[    5.995678]     hdmi_tx_lvl_ch0=3
[    5.995700]     hdmi_tx_lvl_ch1=3
[    5.995722]     hdmi_tx_lvl_ch2=3
[    5.995743]     hdmi_tx_emp_lvl=6
[    5.995765]     hdmi_clk_amp_lvl=31
[    5.995787]     hdmi_tx_res=0
[    5.995808]     HPD=true
[    5.995830]     vout=hdmi
[    6.036779] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd
[    6.069845] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23
[    6.079194] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
[    6.087502] usb 4-1: Product: USB3.0 Hub
[    6.092541] usb 4-1: Manufacturer: GenesysLogic
[    6.127903] hub 4-1:1.0: USB hub found
[    6.132461] hub 4-1:1.0: 2 ports detected
[    6.776613] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd
[    6.807803] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00
[    6.816038] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6
[    6.823256] usb 6-1: Product: USB 10/100/1000 LAN
[    6.828044] usb 6-1: Manufacturer: Realtek
[    6.832181] usb 6-1: SerialNumber: 000001000000
[    6.969795] input: gpio-keys as /devices/platform/gpio-keys/input/input0
[    7.082036] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd
[    7.160678] r8152 6-1:1.0: load rtl8153a-3 v2 02/07/20 successfully
[    7.246940] r8152 6-1:1.0 eth0: v1.12.13
[    7.367254] input: Dell KB216 Wired Keyboard as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:413C:2113.0001/input/input1
[    7.457573] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-12120000.usb-1/input0
[    7.498835] input: Dell KB216 Wired Keyboard System Control as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.1/0003:413C:2113.0002/input/input2
[    7.577009] input: Dell KB216 Wired Keyboard Consumer Control as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.1/0003:413C:2113.0002/input/input3
[    7.597089] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-12120000.usb-1/input1
[    7.615344] usbcore: registered new interface driver usbhid
[    7.626417] usbhid: USB HID core driver
[    7.830765] I/O error, dev mmcblk0, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[    7.855616] I/O error, dev mmcblk0, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[    7.882778] EXT4-fs (mmcblk0p1): mounted filesystem with ordered data mode. Quota mode: none.
[    8.495213] systemd[1]: System time before build time, advancing clock.
[    8.552733] systemd[1]: Inserted module 'autofs4'
[    8.611272] NET: Registered PF_INET6 protocol family
[    8.621199] Segment Routing with IPv6
[    8.627270] In-situ OAM (IOAM) with IPv6
[    8.884202] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified)
[    8.919835] systemd[1]: Detected architecture arm.
[    8.964506] systemd[1]: Hostname set to <DietPi>.
[    9.382930] I/O error, dev mmcblk0, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2
[    9.748034] systemd[1]: Queued start job for default target graphical.target.
[    9.844465] systemd[1]: Created slice system-getty.slice - Slice /system/getty.
[    9.868145] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe.
[    9.880197] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty.
[    9.892368] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch.
[    9.906862] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch.
[    9.921116] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point.
[    9.937311] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes.
[    9.948590] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes.
[    9.961151] systemd[1]: Reached target paths.target - Path Units.
[    9.970825] systemd[1]: Reached target remote-fs.target - Remote File Systems.
[    9.981719] systemd[1]: Reached target slices.target - Slice Units.
[    9.991756] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes.
[   10.004383] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket.
[   10.017113] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe.
[   10.030728] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket.
[   10.046612] random: crng init done
[   10.076038] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log).
[   10.103178] systemd[1]: Listening on systemd-journald.socket - Journal Socket.
[   10.115335] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket.
[   10.128706] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket.
[   10.141271] systemd[1]: Reached target sockets.target - Socket Units.
[   10.153175] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages).
[   10.217923] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System...
[   10.244957] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System...
[   10.260470] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System...
[   10.276956] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock...
[   10.292996] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout...
[   10.309178] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes...
[   10.326963] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs...
[   10.343313] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod...
[   10.359632] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore...
[   10.378821] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse...
[   10.394783] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop...
[   10.406921] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root).
[   10.429662] systemd[1]: Starting systemd-journald.service - Journal Service...
[   10.563638] loop: module loaded
[   10.587584] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules...
[   10.609121] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems...
[   10.627266] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices...
[   10.645839] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System.
[   10.657843] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System.
[   10.669740] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System.
[   10.682656] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock.
[   10.696025] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes.
[   10.710290] systemd[1]: modprobe@configfs.service: Deactivated successfully.
[   10.719264] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs.
[   10.732762] systemd[1]: modprobe@dm_mod.service: Deactivated successfully.
[   10.741489] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod.
[   10.754318] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout.
[   10.767771] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully.
[   10.777554] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore.
[   10.793619] systemd[1]: modprobe@fuse.service: Deactivated successfully.
[   10.794468] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse.
[   10.818928] systemd[1]: modprobe@loop.service: Deactivated successfully.
[   10.828656] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop.
[   10.841562] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules.
[   10.937074] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System...
[   10.953440] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System...
[   10.966526] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met.
[   10.982670] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables...
[   10.999227] systemd[1]: Started systemd-journald.service - Journal Service.
[   11.023732] I/O error, dev mmcblk0, sector 8192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[   11.033759] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write
[   11.042993] EXT4-fs (mmcblk0p1): I/O error while writing superblock
[   12.285827] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 3
[   12.305847] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000
[   12.305877] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000
[   12.305889] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x03860000
[   12.398200] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0
[   12.398372] mali 11800000.gpu: Protected mode not available
[   12.402185] mali 11800000.gpu: Probed as mali0
[   13.723352] systemd-journald[319]: Received client request to flush runtime journal.
[   36.318187] vdd_ldo12: disabling
[  318.326771] I/O error, dev mmcblk0, sector 8192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2
[  318.336938] Buffer I/O error on dev mmcblk0p1, logical block 0, lost sync page write
[  318.345823] EXT4-fs (mmcblk0p1): I/O error while writing superblock
[  374.736725] usb 4-1.2: new SuperSpeed USB device number 3 using xhci-hcd
[  374.769563] usb 4-1.2: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00
[  374.769658] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[  374.769724] usb 4-1.2: Product:  SanDisk 3.2Gen1
[  374.769777] usb 4-1.2: Manufacturer:  USB
[  374.769829] usb 4-1.2: SerialNumber: 0101afb8c732d4713dc835eee969d7b71da177ece8f9c7501222066ccee7953b2ee3000000000000000000002ff1d9e7ff1f2b00955581079428103a
[  374.874413] SCSI subsystem initialized
[  374.879839] usb-storage 4-1.2:1.0: USB Mass Storage device detected
[  374.881195] scsi host0: usb-storage 4-1.2:1.0
[  374.881590] usbcore: registered new interface driver usb-storage
[  374.884918] usbcore: registered new interface driver uas
[  375.920427] scsi 0:0:0:0: Direct-Access      USB      SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6
[  375.951847] scsi 0:0:0:0: Attached scsi generic sg0 type 0
[  376.024822] sd 0:0:0:0: [sda] 240353280 512-byte logical blocks: (123 GB/115 GiB)
[  376.026139] sd 0:0:0:0: [sda] Write Protect is off
[  376.026173] sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
[  376.027293] sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
[  376.040855]  sda: sda1
[  376.041566] sd 0:0:0:0: [sda] Attached SCSI removable disk
[  391.558815] FAT-fs (sda1): Volume was not properly unmounted. Some data may be corrupt. Please run fsck.