U-Boot SPL 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):84de50c7 NOTICE: BL31: Built : 11:01:01, Sep 25 2023 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082628, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: -65539 INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. U-Boot 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero3 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. starting USB... No working controllers found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3337 bytes read in 4 ms (814.5 KiB/s) ## Executing script at 4fc00000 306 bytes read in 3 ms (99.6 KiB/s) 9419107 bytes read in 785 ms (11.4 MiB/s) 10113761 bytes read in 841 ms (11.5 MiB/s) 39931 bytes read in 10 ms (3.8 MiB/s) Ethernet adapter: "" Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41800000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10113697 Bytes = 9.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4965a000, end 49fff2a1 ... OK Loading Device Tree to 000000004964d000, end 0000000049659bfa ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.31-sun50iw9 (root@liuyang-WUJIE-14) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 [ 0.000000] Machine model: OrangePi Zero3 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fdc4040-0x7fdc5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 19 pages/cpu s37992 r8192 d31640 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=c270c9eb-32ee-468a-8581-2fa6ec670353 rootfstype=ext4 rootwait console=ttyS0,115200 console=tty1 consoleblank=0 coherent_pool=2M usb-storage.quirks= net.ifnames=0 ethernet_phy= [ 0.000000] Unknown kernel command line parameters "ethernet_phy=", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 393216 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 128776(98%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 861728K/1048576K available (13888K kernel code, 1462K rwdata, 3760K rodata, 2752K init, 499K bss, 55776K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000553] Console: colour dummy device 80x25 [ 0.000923] printk: console [tty1] enabled [ 0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001035] pid_max: default: 32768 minimum: 301 [ 0.001115] LSM: Security Framework initializing [ 0.001153] Yama: becoming mindful. [ 0.001255] AppArmor: AppArmor initialized [ 0.001341] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001364] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002382] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002948] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002968] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003135] rcu: Hierarchical SRCU implementation. [ 0.003147] rcu: Max phase no-delay instances is 1000. [ 0.004279] smp: Bringing up secondary CPUs ... [ 0.004753] Detected VIPT I-cache on CPU1 [ 0.004827] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.004861] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005364] Detected VIPT I-cache on CPU2 [ 0.005416] cacheinfo: Unable to detect cache hierarchy for CPU 2 [ 0.005434] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005881] Detected VIPT I-cache on CPU3 [ 0.005936] cacheinfo: Unable to detect cache hierarchy for CPU 3 [ 0.005954] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006013] smp: Brought up 1 node, 4 CPUs [ 0.006084] SMP: Total of 4 processors activated. [ 0.006096] CPU features: detected: 32-bit EL0 Support [ 0.006106] CPU features: detected: CRC32 instructions [ 0.006176] CPU: All CPU(s) started at EL2 [ 0.006187] alternatives: applying system-wide alternatives [ 0.007856] devtmpfs: initialized [ 0.013727] Registered cp15_barrier emulation handler [ 0.013750] Registered setend emulation handler [ 0.013902] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.013932] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.018895] pinctrl core: initialized pinctrl subsystem [ 0.020218] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.021495] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.021986] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.022351] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.022417] audit: initializing netlink subsys (disabled) [ 0.022548] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.022901] thermal_sys: Registered thermal governor 'fair_share' [ 0.022907] thermal_sys: Registered thermal governor 'bang_bang' [ 0.022920] thermal_sys: Registered thermal governor 'step_wise' [ 0.022931] thermal_sys: Registered thermal governor 'user_space' [ 0.022984] cpuidle: using governor menu [ 0.023188] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.023276] ASID allocator initialised with 65536 entries [ 0.023436] Serial: AMBA PL011 UART driver [ 0.028389] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.032419] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.032870] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.032900] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.033594] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.034860] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector [ 0.036423] KASLR disabled due to lack of seed [ 0.042561] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.042576] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.042590] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.042602] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.042615] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.042626] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.042638] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042649] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.043343] cryptd: max_cpu_qlen set to 1000 [ 0.108181] raid6: neonx8 gen() 1851 MB/s [ 0.176244] raid6: neonx4 gen() 1891 MB/s [ 0.244313] raid6: neonx2 gen() 1792 MB/s [ 0.312372] raid6: neonx1 gen() 1558 MB/s [ 0.380431] raid6: int64x8 gen() 1282 MB/s [ 0.448496] raid6: int64x4 gen() 1426 MB/s [ 0.516560] raid6: int64x2 gen() 1218 MB/s [ 0.584621] raid6: int64x1 gen() 905 MB/s [ 0.584633] raid6: using algorithm neonx4 gen() 1891 MB/s [ 0.652679] raid6: .... xor() 1365 MB/s, rmw enabled [ 0.652691] raid6: using neon recovery algorithm [ 0.653967] iommu: Default domain type: Translated [ 0.653981] iommu: DMA domain TLB invalidation policy: strict mode [ 0.654231] SCSI subsystem initialized [ 0.654419] usbcore: registered new interface driver usbfs [ 0.654466] usbcore: registered new interface driver hub [ 0.654501] usbcore: registered new device driver usb [ 0.654793] pps_core: LinuxPPS API ver. 1 registered [ 0.654805] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.654830] PTP clock support registered [ 0.655114] ARM FF-A: FFA_VERSION returned not supported [ 0.655415] Advanced Linux Sound Architecture Driver Initialized. [ 0.656040] NetLabel: Initializing [ 0.656052] NetLabel: domain hash size = 128 [ 0.656061] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.656133] NetLabel: unlabeled traffic allowed by default [ 0.656144] mctp: management component transport protocol core [ 0.656156] NET: Registered PF_MCTP protocol family [ 0.656551] clocksource: Switched to clocksource arch_sys_counter [ 0.656764] VFS: Disk quotas dquot_6.6.0 [ 0.656812] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657316] AppArmor: AppArmor Filesystem Enabled [ 0.663603] NET: Registered PF_INET protocol family [ 0.663752] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.664872] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.664907] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.664931] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.665011] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.665311] TCP: Hash tables configured (established 8192 bind 8192) [ 0.665413] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665452] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665611] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.666075] Trying to unpack rootfs image as initramfs... [ 0.669243] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.671184] Initialise system trusted keyrings [ 0.671283] Key type blacklist registered [ 0.671598] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 0.677016] zbud: loaded [ 0.678710] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.681261] integrity: Platform Keyring initialized [ 0.723798] xor: measuring software checksum speed [ 0.728588] 8regs : 2100 MB/sec [ 0.733195] 32regs : 2169 MB/sec [ 0.738080] arm64_neon : 2037 MB/sec [ 0.738113] xor: using function: 32regs (2169 MB/sec) [ 0.738134] async_tx: api initialized (async) [ 0.738151] Key type asymmetric registered [ 0.738163] Asymmetric key parser 'x509' registered [ 1.170365] Freeing initrd memory: 9876K [ 1.191855] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.191996] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.192118] io scheduler mq-deadline registered [ 1.192132] io scheduler kyber registered [ 1.192324] io scheduler bfq registered [ 1.205043] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.207298] misc dump reg init [ 1.210427] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.214165] loop: module loaded [ 1.217140] usbcore: registered new interface driver usb-storage [ 1.217568] mousedev: PS/2 mouse device common for all mice [ 1.218606] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.218637] sun6i-rtc 7000000.rtc: setting system clock to 1970-01-02T00:00:04 UTC (86404) [ 1.218742] sun6i-rtc 7000000.rtc: RTC enabled [ 1.218956] i2c_dev: i2c /dev entries driver [ 1.219191] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 1.219711] axp20x-i2c 0-0036: AXP20x variant AXP313a found [ 1.219882] axp20x-regulator axp20x-regulator: DCDC frequency on AXP313a is fixed to 3 MHz. [ 1.219901] axp20x-regulator axp20x-regulator: Error setting dcdc frequency: -22 [ 1.230023] axp20x-i2c 0-0036: AXP20X driver loaded [ 1.230752] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.232003] sdhci: Secure Digital Host Controller Interface driver [ 1.232017] sdhci: Copyright(c) Pierre Ossman [ 1.232047] Synopsys Designware Multimedia Card Interface Driver [ 1.232740] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.233121] ledtrig-cpu: registered to indicate activity on CPUs [ 1.233396] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 1.233847] hid: raw HID events driver (C) Jiri Kosina [ 1.233931] usbcore: registered new interface driver usbhid [ 1.233944] usbhid: USB HID core driver [ 1.277732] NET: Registered PF_INET6 protocol family [ 1.298632] Segment Routing with IPv6 [ 1.298735] In-situ OAM (IOAM) with IPv6 [ 1.298847] NET: Registered PF_PACKET protocol family [ 1.298976] 8021q: 802.1Q VLAN Support v1.8 [ 1.299128] 9pnet: Installing 9P2000 support [ 1.299217] Key type dns_resolver registered [ 1.299714] registered taskstats version 1 [ 1.299747] Loading compiled-in X.509 certificates [ 1.303185] Loaded X.509 cert 'Build time autogenerated kernel key: 670a8c44863ab36e3a91b0b7e24e53744b2354d7' [ 1.305359] zswap: loaded using pool zstd/z3fold [ 1.305701] Key type .fscrypt registered [ 1.305715] Key type fscrypt-provisioning registered [ 1.306724] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.306956] Key type encrypted registered [ 1.306977] AppArmor: AppArmor sha1 policy hashing enabled [ 1.307009] ima: No TPM chip found, activating TPM-bypass! [ 1.307048] ima: Allocated hash algorithm: sha1 [ 1.307090] ima: No architecture policies found [ 1.307139] evm: Initialising EVM extended attributes: [ 1.307150] evm: security.selinux [ 1.307160] evm: security.SMACK64 [ 1.307168] evm: security.SMACK64EXEC [ 1.307178] evm: security.SMACK64TRANSMUTE [ 1.307187] evm: security.SMACK64MMAP [ 1.307196] evm: security.apparmor [ 1.307205] evm: security.ima [ 1.307214] evm: security.capability [ 1.307222] evm: HMAC attrs: 0x1 [ 1.329838] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.330392] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.330661] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 1.331151] printk: console [ttyS0] disabled [ 1.331233] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 285, base_baud = 1500000) is a 16550A [ 2.704955] printk: console [ttyS0] enabled [ 2.709926] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.717703] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.741353] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e85e48) [ 2.749101] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e8a620) [ 2.757199] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e82e20) [ 2.765621] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.773578] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.783675] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.791554] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e84f08) [ 2.799422] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.807230] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.814540] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator [ 2.823652] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.831236] spi-nor spi0.0: ZB25VQ128A (16384 Kbytes) [ 2.851676] sun50i-cpufreq-nvmem: will use speed0 CPU OPPs [ 2.861449] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1032000 KHz, changing to: 1200000 KHz [ 2.872395] OF: /thermal-zones/gpu-thermal/cooling-maps/map0: could not get #cooling-cells for /soc/gpu@1800000 [ 2.882504] thermal_sys: Add a cooling_device property with at least one device [ 2.889826] thermal thermal_zone0: binding zone gpu-thermal with cdev cpufreq-cpu0 failed:-2 [ 2.898711] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator [ 2.910259] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.911056] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.912085] ehci-platform 5200000.usb: EHCI Host Controller [ 2.912102] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1 [ 2.912178] ehci-platform 5200000.usb: irq 291, io mem 0x05200000 [ 2.912642] ehci-platform 5310000.usb: EHCI Host Controller [ 2.912652] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 2 [ 2.912708] ehci-platform 5310000.usb: irq 292, io mem 0x05310000 [ 2.912777] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 2.912852] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 2.913545] ehci-platform 5311000.usb: EHCI Host Controller [ 2.913555] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3 [ 2.913611] ehci-platform 5311000.usb: irq 294, io mem 0x05311000 [ 2.919603] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 2.919647] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 2.919657] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 4 [ 2.919710] ohci-platform 5310400.usb: irq 296, io mem 0x05310400 [ 2.919723] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.919733] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 5 [ 2.919776] ohci-platform 5311400.usb: irq 297, io mem 0x05311400 [ 2.925003] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.929827] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 6 [ 2.929830] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.929982] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.929989] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.929994] usb usb1: Product: EHCI Host Controller [ 2.929999] usb usb1: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 2.930003] usb usb1: SerialNumber: 5200000.usb [ 2.930349] hub 1-0:1.0: USB hub found [ 2.930371] hub 1-0:1.0: 1 port detected [ 2.944544] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 2.949269] ohci-platform 5200400.usb: irq 295, io mem 0x05200400 [ 2.957084] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.960651] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.964547] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.971738] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.125284] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.134229] usb usb2: Product: EHCI Host Controller [ 3.134234] usb usb2: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.147602] mmc1: new high speed SDHC card at address 0001 [ 3.155560] usb usb2: SerialNumber: 5310000.usb [ 3.156102] mmcblk1: mmc1:0001 SD16G 29.5 GiB [ 3.160456] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.161115] hub 2-0:1.0: USB hub found [ 3.161145] hub 2-0:1.0: 1 port detected [ 3.161981] ALSA device list: [ 3.161984] #0: audiocodec [ 3.161987] #1: ahubdam [ 3.161990] #2: ahubhdmi [ 3.162139] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.162145] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.162150] usb usb3: Product: EHCI Host Controller [ 3.162154] usb usb3: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.162158] usb usb3: SerialNumber: 5311000.usb [ 3.162393] hub 3-0:1.0: USB hub found [ 3.162415] hub 3-0:1.0: 1 port detected [ 3.162702] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.162709] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.162714] usb usb5: Product: Generic Platform OHCI controller [ 3.162718] usb usb5: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.162722] usb usb5: SerialNumber: 5311400.usb [ 3.162940] hub 5-0:1.0: USB hub found [ 3.162960] hub 5-0:1.0: 1 port detected [ 3.163244] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.163250] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.163255] usb usb6: Product: Generic Platform OHCI controller [ 3.163259] usb usb6: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.163263] usb usb6: SerialNumber: 5200400.usb [ 3.163491] hub 6-0:1.0: USB hub found [ 3.163511] hub 6-0:1.0: 1 port detected [ 3.163790] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.163797] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.163802] usb usb4: Product: Generic Platform OHCI controller [ 3.163806] usb usb4: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.163810] usb usb4: SerialNumber: 5310400.usb [ 3.164025] hub 4-0:1.0: USB hub found [ 3.164044] hub 4-0:1.0: 1 port detected [ 3.168357] mmcblk1: p1 [ 3.188844] mmc0: new high speed SDIO card at address 8800 [ 3.375808] Freeing unused kernel memory: 2752K [ 3.380432] Run /init as init process [ 3.751967] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pi not found, using dummy regulator [ 3.761097] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.767507] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.773581] dwmac-sun8i 5020000.ethernet: No regulator found [ 3.779383] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.785202] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 3.794541] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.801873] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.809126] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.814114] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.820908] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.826569] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 4.497460] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 5.317399] systemd[1]: System time before build time, advancing clock. [ 5.455178] systemd[1]: systemd 252.17-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.487901] systemd[1]: Detected architecture arm64. [ 5.503330] systemd[1]: Hostname set to . [ 6.106851] systemd[1]: Queued start job for default target graphical.target. [ 6.132967] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 6.142996] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 6.152709] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 6.161907] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 6.173225] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 6.184265] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 6.196992] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 6.204826] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 6.213907] systemd[1]: Reached target paths.target - Path Units. [ 6.220162] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 6.227524] systemd[1]: Reached target slices.target - Slice Units. [ 6.233985] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 6.242874] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 6.251856] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 6.261399] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 6.270139] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 6.279473] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 6.288376] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 6.296942] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 6.305017] systemd[1]: Reached target sockets.target - Socket Units. [ 6.336937] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 6.352701] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 6.363944] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 6.372604] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.391823] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 6.403925] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 6.416428] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 6.429358] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 6.441643] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 6.453697] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 6.466222] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 6.477787] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 6.486036] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 6.502771] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.515403] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.526329] systemd[1]: Starting systemd-journald.service - Journal Service... [ 6.533921] fuse: init (API version 7.37) [ 6.539926] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 6.551937] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 6.565497] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 6.579906] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 6.588205] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.596971] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.603762] EXT4-fs (mmcblk1p1): re-mounted. Quota mode: none. [ 6.614062] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 6.623543] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.633620] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.641499] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.651421] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 6.659095] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 6.668586] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.676564] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.686846] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.694642] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 6.703843] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 6.713865] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 6.721545] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 6.730114] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.795670] Adding 1092604k swap on /var/swap. Priority:-2 extents:4 across:1133564k SSFS Debian GNU/Linux 12 DietPi ttyS0 DietPi login: root Password: Linux DietPi 6.1.31-sun50iw9 #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. ───────────────────────────────────────────────────── DietPi v8.24.1 : 07:53 - Sun 12/31/23 ───────────────────────────────────────────────────── - LAN IP : 192.168.100.120 (eth0)   DietPi-Update ───────────────────────────────────────────────────── Phase: Checking for available DietPi update  [ ] DietPi-Update | Checking IPv4 network connectivity (1/2).  [ OK ] DietPi-Update | Checking IPv4 network connectivity  [ ] DietPi-Update | Checking IPv6 network connectivity (1/2).  [ OK ] DietPi-Update | Checking IPv6 network connectivity  [ ] DietPi-Update | Checking DNS resolver (1/2).  [ OK ] DietPi-Update | Checking DNS resolver  [ ] DietPi-TimeSync | systemctl stop systemd-timesyncd.  [ OK ] DietPi-TimeSync | systemctl stop systemd-timesyncd  [ ] DietPi-TimeSync | mkdir -p /run/systemd/timesync.  [ OK ] DietPi-TimeSync | mkdir -p /run/systemd/timesync  [ INFO ] DietPi-Update | Getting latest version from: https://raw.githubusercontent.com/MichaIng/DietPi/master/.update/version  [ OK ] DietPi-Update | Got valid latest version: 8.25.1  [ OK ] DietPi-Update | Update available:  [ INFO ] DietPi-Update | Current version : v8.24.1  [ INFO ] DietPi-Update | Latest version : v8.25.1   DietPi-Update ───────────────────────────────────────────────────── Phase: Checking for update pre-requirements  [ OK ] DietPi-Update | DietPi-Userdata validation: /mnt/dietpi_userdata  [ OK ] DietPi-Update | Free space check: path=/ | available=26911 MiB | required=100 MiB  [ SUB1 ] DietPi-Services > stop  [ ] DietPi-Services | stop : cron.  [ OK ] DietPi-Services | stop : cron   DietPi-Update ───────────────────────────────────────────────────── Phase: Applying pre-patches  [ ] DietPi-Update | Downloading pre-patches. ..  ..  ..  ..  [ OK ] DietPi-Update | Downloading pre-patches  [ ] DietPi-Update | Applying execute permission.  [ OK ] DietPi-Update | Applying execute permission  [ OK ] DietPi-Update | Successfully applied pre-patches   DietPi-Update ───────────────────────────────────────────────────── Phase: Upgrading APT packages  [ INFO ] DietPi-Update | APT update, please wait... Get:1 https://deb.debian.org/debian bookworm InRelease [151 kB] Get:2 https://deb.debian.org/debian bookworm-updates InRelease [52.1 kB] Get:3 https://deb.debian.org/debian-security bookworm-security InRelease [48.0 kB] Get:4 https://deb.debian.org/debian bookworm-backports InRelease [56.5 kB] Get:5 https://deb.debian.org/debian bookworm/main arm64 Packages [8685 kB] Get:6 https://deb.debian.org/debian bookworm/contrib arm64 Packages [45.6 kB] Get:7 https://deb.debian.org/debian bookworm/non-free-firmware arm64 Packages [5824 B] Get:8 https://deb.debian.org/debian bookworm/non-free arm64 Packages [75.4 kB] Get:9 https://deb.debian.org/debian bookworm-updates/main arm64 Packages [12.5 kB] Get:10 https://deb.debian.org/debian-security bookworm-security/main arm64 Packages [130 kB] Get:11 https://deb.debian.org/debian bookworm-backports/main arm64 Packages [144 kB] Get:12 https://deb.debian.org/debian bookworm-backports/contrib arm64 Packages [4252 B] Get:13 https://deb.debian.org/debian bookworm-backports/non-free arm64 Packages [1284 B] Fetched 9411 kB in 5s (1912 kB/s) Reading package lists...  [ OK ] DietPi-Update | APT update  [ INFO ] DietPi-Update | APT upgrade, please wait... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... The following packages will be upgraded: base-files curl libcurl4 libgnutls30 libnghttp2-14 libsystemd-shared libsystemd0 libudev1 perl-base systemd systemd-sysv systemd-timesyncd tzdata udev 14 upgraded, 0 newly installed, 0 to remove and 0 not upgraded. Need to get 10.3 MB of archives. After this operation, 111 kB of additional disk space will be used. Get:1 https://deb.debian.org/debian bookworm/main arm64 base-files arm64 12.4+deb12u4 [70.8 kB] Get:2 https://deb.debian.org/debian bookworm/main arm64 perl-base arm64 5.36.0-7+deb12u1 [1478 kB] Get:3 https://deb.debian.org/debian bookworm/main arm64 systemd-timesyncd arm64 252.19-1~deb12u1 [61.1 kB] Get:4 https://deb.debian.org/debian bookworm/main arm64 systemd arm64 252.19-1~deb12u1 [2828 kB] Get:5 https://deb.debian.org/debian bookworm/main arm64 libsystemd-shared arm64 252.19-1~deb12u1 [1506 kB] Get:6 https://deb.debian.org/debian bookworm/main arm64 libsystemd0 arm64 252.19-1~deb12u1 [307 kB] Get:7 https://deb.debian.org/debian bookworm/main arm64 systemd-sysv arm64 252.19-1~deb12u1 [41.8 kB] Get:8 https://deb.debian.org/debian bookworm/main arm64 libgnutls30 arm64 3.7.9-2+deb12u1 [1313 kB] Get:9 https://deb.debian.org/debian bookworm/main arm64 udev arm64 252.19-1~deb12u1 [1600 kB] Get:10 https://deb.debian.org/debian bookworm/main arm64 libudev1 arm64 252.19-1~deb12u1 [102 kB] Get:11 https://deb.debian.org/debian bookworm/main arm64 tzdata all 2023c-5+deb12u1 [296 kB] Get:12 https://deb.debian.org/debian bookworm/main arm64 libnghttp2-14 arm64 1.52.0-1+deb12u1 [68.3 kB] Get:13 https://deb.debian.org/debian-security bookworm-security/main arm64 curl arm64 7.88.1-10+deb12u5 [308 kB] Get:14 https://deb.debian.org/debian-security bookworm-security/main arm64 libcurl4 arm64 7.88.1-10+deb12u5 [366 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 10.3 MB in 1s (7119 kB/s) (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../base-files_12.4+deb12u4_arm64.deb ... Unpacking base-files (12.4+deb12u4) over (12.4+deb12u2) ... Setting up base-files (12.4+deb12u4) ... Installing new version of config file /etc/debian_version ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../perl-base_5.36.0-7+deb12u1_arm64.deb ... Unpacking perl-base (5.36.0-7+deb12u1) over (5.36.0-7) ... Setting up perl-base (5.36.0-7+deb12u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../systemd-timesyncd_252.19-1~deb12u1_arm64.deb ... Unpacking systemd-timesyncd (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Preparing to unpack .../systemd_252.19-1~deb12u1_arm64.deb ... Unpacking systemd (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Preparing to unpack .../libsystemd-shared_252.19-1~deb12u1_arm64.deb ... Unpacking libsystemd-shared:arm64 (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Preparing to unpack .../libsystemd0_252.19-1~deb12u1_arm64.deb ... Unpacking libsystemd0:arm64 (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Setting up libsystemd0:arm64 (252.19-1~deb12u1) ... Setting up libsystemd-shared:arm64 (252.19-1~deb12u1) ... Setting up systemd (252.19-1~deb12u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../systemd-sysv_252.19-1~deb12u1_arm64.deb ... Unpacking systemd-sysv (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Preparing to unpack .../libgnutls30_3.7.9-2+deb12u1_arm64.deb ... Unpacking libgnutls30:arm64 (3.7.9-2+deb12u1) over (3.7.9-2) ... Setting up libgnutls30:arm64 (3.7.9-2+deb12u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../udev_252.19-1~deb12u1_arm64.deb ... Unpacking udev (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Preparing to unpack .../libudev1_252.19-1~deb12u1_arm64.deb ... Unpacking libudev1:arm64 (252.19-1~deb12u1) over (252.17-1~deb12u1) ... Setting up libudev1:arm64 (252.19-1~deb12u1) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../tzdata_2023c-5+deb12u1_all.deb ... Unpacking tzdata (2023c-5+deb12u1) over (2023c-5) ... Preparing to unpack .../libnghttp2-14_1.52.0-1+deb12u1_arm64.deb ... Unpacking libnghttp2-14:arm64 (1.52.0-1+deb12u1) over (1.52.0-1) ... Preparing to unpack .../curl_7.88.1-10+deb12u5_arm64.deb ... Unpacking curl (7.88.1-10+deb12u5) over (7.88.1-10+deb12u4) ... Preparing to unpack .../libcurl4_7.88.1-10+deb12u5_arm64.deb ... Unpacking libcurl4:arm64 (7.88.1-10+deb12u5) over (7.88.1-10+deb12u4) ... Setting up systemd-sysv (252.19-1~deb12u1) ... Setting up libnghttp2-14:arm64 (1.52.0-1+deb12u1) ... Setting up tzdata (2023c-5+deb12u1) ... Current default time zone: 'Europe/London' Local time is now: Sun Dec 31 07:54:56 GMT 2023. Universal Time is now: Sun Dec 31 07:54:56 UTC 2023. Run 'dpkg-reconfigure tzdata' if you wish to change it. Setting up systemd-timesyncd (252.19-1~deb12u1) ... Setting up udev (252.19-1~deb12u1) ... Setting up libcurl4:arm64 (7.88.1-10+deb12u5) ... Setting up curl (7.88.1-10+deb12u5) ... Processing triggers for libc-bin (2.36-9+deb12u3) ... Processing triggers for initramfs-tools (0.142) ... update-initramfs: Generating /boot/initrd.img-6.1.31-sun50iw9 update-initramfs: Converting to U-Boot format Image Name: uInitrd Created: Sun Dec 31 07:55:28 2023 Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10113333 Bytes = 9876.30 KiB = 9.64 MiB Load Address: 00000000 Entry Point: 00000000 '/boot/uInitrd' -> 'uInitrd-6.1.31-sun50iw9'  [ OK ] DietPi-Update | APT upgrade   DietPi-Update ───────────────────────────────────────────────────── Phase: Installing new DietPi code  [ ] DietPi-Update | Downloading update archive. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  [ OK ] DietPi-Update | Downloading update archive  [ ] DietPi-Update | Unpacking update archive.  [ OK ] DietPi-Update | Unpacking update archive  [ ] DietPi-Update | Removing unused files.  [ OK ] DietPi-Update | Removing unused files  [ ] DietPi-Update | Hardening update archive mode.  [ OK ] DietPi-Update | Hardening update archive mode  [ ] DietPi-Update | Installing new DietPi scripts.  [ OK ] DietPi-Update | Installing new DietPi scripts  [ ] DietPi-Update | Installing new DietPi system files.  [ OK ] DietPi-Update | Installing new DietPi system files  [ SUB1 ] DietPi-Set_software > verify_dietpi.txt  [ ] DietPi-Set_software | Downloading current dietpi.txt. ..  ..  ..  ..  [ OK ] DietPi-Set_software | Downloading current dietpi.txt  [ OK ] verify_dietpi.txt | Completed  [ ] DietPi-Update | sync.  [ OK ] DietPi-Update | sync  [ ] DietPi-Update | systemctl daemon-reload. ..  ..  ..  ..  .. [ OK ] DietPi-Update | systemctl daemon-reload   DietPi-Update ───────────────────────────────────────────────────── Phase: Applying incremental patches  [ INFO ] DietPi-Update | Current version : v8.24.1  [ INFO ] DietPi-Update | Latest version : v8.25.1  [ INFO ] DietPi-Patch | Patching to DietPi v8.25...  [ OK ] DietPi-Patch | Patched to DietPi v8.25  [ INFO ] DietPi-Update | APT autopurge, please wait... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.  [ OK ] DietPi-Update | APT autopurge  [ ] DietPi-Update | systemctl daemon-reload. ..  ..  ..  ..  .. [ OK ] DietPi-Update | systemctl daemon-reload  [ OK ] DietPi-Update | Incremental patching to v8.25.1 completed  [ INFO ] DietPi-Update | Checking for new available live patches  [ ] DietPi-Update | eval echo 1 > /boot/dietpi/.install_stage.  [ OK ] DietPi-Update | eval echo 1 > /boot/dietpi/.install_stage   DietPi-Update ───────────────────────────────────────────────────── Phase: Completed  [ INFO ] DietPi-Update | Current version : v8.25.1  [ INFO ] DietPi-Update | Latest version : v8.25.1 )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌──────────────────────────────┤ DietPi-Survey ├───────────────────────────────┐│ DietPi-Survey would like to collect anonymous usage statistics.││ This allows us to focus development based on popularity.││ - NO private data will be collected and NO ONE can identify you based on ││ it.││ - The data is sent via secured SFTP connection, stored unreadable to the ││ public upload user.││ - If you agree, your uploaded data will be updated after each DietPi-Update ││ and DietPi-Software install.││ - Current survey statistics can be reviewed at: https://dietpi.com/survey/ ││││││Show : Show me the upload file content││1 : Opt IN and upload data││0 : Opt OUT and purge uploaded data(B│││││││││└──────────────────────────────────────────────────────────────────────────────┘1 : Opt IN and upload data (B0 : Opt OUT and purge uploaded data[?25h(B  [ OK ] DietPi-Survey | Setting in /boot/dietpi.txt adjusted: SURVEY_OPTED_IN=1  [ ] DietPi-Survey | Sending survey data. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  ..  ..  ..  .. . .. ..  ..  ..  [ OK ] DietPi-Survey | Sending survey data  [ ] DietPi-Update | sync.  [ OK ] DietPi-Update | sync  ───────────────────────────────────────────────────── DietPi v8.25.1 : 07:57 - Sun 12/31/23 ───────────────────────────────────────────────────── - LAN IP : 192.168.100.120 (eth0)  [ ] DietPi-Software | Initialising database.  [ OK ] DietPi-Software | Initialised database   DietPi-Software ───────────────────────────────────────────────────── Step: Applying initial first run setup steps  [ ] DietPi-Software | Checking IPv4 network connectivity (1/2).  [ OK ] DietPi-Software | Checking IPv4 network connectivity  [ ] DietPi-Software | Checking IPv6 network connectivity (1/2).  [ OK ] DietPi-Software | Checking IPv6 network connectivity  [ ] DietPi-Software | Checking DNS resolver (1/2).  [ OK ] DietPi-Software | Checking DNS resolver  [ ] DietPi-TimeSync | systemctl stop systemd-timesyncd.  [ OK ] DietPi-TimeSync | systemctl stop systemd-timesyncd  [ ] DietPi-TimeSync | mkdir -p /run/systemd/timesync.  [ OK ] DietPi-TimeSync | mkdir -p /run/systemd/timesync  [ INFO ] DietPi-Software | APT update, please wait... Hit:1 https://deb.debian.org/debian bookworm InRelease Hit:2 https://deb.debian.org/debian bookworm-updates InRelease Hit:3 https://deb.debian.org/debian-security bookworm-security InRelease Hit:4 https://deb.debian.org/debian bookworm-backports InRelease Reading package lists...  [ OK ] DietPi-Software | APT update  [ INFO ] DietPi-Software | APT dist-upgrade, please wait... Reading package lists... Building dependency tree... Reading state information... Calculating upgrade... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.  [ OK ] DietPi-Software | APT dist-upgrade  [ ] DietPi-Software | eval > /boot/dietpi/.skip_distro_upgrade.  [ OK ] DietPi-Software | eval > /boot/dietpi/.skip_distro_upgrade  [ SUB1 ] DietPi-Set_software > passwords )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│││ Change global software password for DietPi-Software installs?││││ This password will be encrypted and saved to││ "/var/lib/dietpi/dietpi-software/.GLOBAL_PW.bin" to be used by││ DietPi-Software as initial password for e.g. web application and frontend ││ logins. This does not affect any previously installed software, just new││ installs.││││ We especially recommend to change it, if you did not change it in││ "dietpi.txt" yet.││││ NB: We highly recommend to apply individual passwords for each software││ title after first login.││││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h (B )0[?25l(B[?25l[?25hOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│ Please enter a new global software password:││ NB: The following characters are not supported $|\"'││││ ____________________________________________________________________________ │││││└──────────────────────────────────────────────────────────────────────────────┘****[?25l[?25h(B )0[?25l(B[?25l[?25hOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│ Please retype and confirm your input:││││ ____________________________________________________________________________ │││││└──────────────────────────────────────────────────────────────────────────────┘****[?25l[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│││ Change login password for "root" and "dietpi" users?││││ DietPi has two accounts by default: "root" and "dietpi". On first boot, both ││ share the password "dietpi", respectively the one set in "dietpi.txt".││││ It is highly recommended to change this password, ideally, it should be││ different than the global software password.││││ Would you like to change the login password for "root" and "dietpi" now?││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h(B )0[?25l(B[?25l[?25hOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│ Please enter a new UNIX user password:││ NB: The default SSH server Dropbear does not support passwords over 100││ characters.││││ ____________________________________________________________________________ │││││└──────────────────────────────────────────────────────────────────────────────┘****[?25l[?25h(B )0[?25l(B[?25l[?25hOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌───────────────────────────┤ DietPi-Set_software ├────────────────────────────┐│ Please retype and confirm your input:││││ ____________________________________________________________________________ │││││└──────────────────────────────────────────────────────────────────────────────┘****[?25l[?25h(B  [ ] DietPi-Set_software | sed --follow-symlinks -i /^[[:blank:]]*AUTO_SETUP_GLOBAL_PASSWORD=/c\#AUTO_SETUP_GLOBAL_PASSWORD= # Password has been encrypted and saved to rootfs /boot/dietpi.txt.  [ OK ] DietPi-Set_software | sed --follow-symlinks -i /^[[:blank:]]*AUTO_SETUP_GLOBAL_PASSWORD=/c\#AUTO_SETUP_GLOBAL_PASSWORD= # Password has been encrypted and saved to rootfs /boot/dietpi.txt  [ ] DietPi-Set_software | chown root:root /var/lib/dietpi/dietpi-software/.GLOBAL_PW.bin.  [ OK ] DietPi-Set_software | chown root:root /var/lib/dietpi/dietpi-software/.GLOBAL_PW.bin  [ ] DietPi-Set_software | chmod 0600 /var/lib/dietpi/dietpi-software/.GLOBAL_PW.bin.  [ OK ] DietPi-Set_software | chmod 0600 /var/lib/dietpi/dietpi-software/.GLOBAL_PW.bin  [ INFO ] DietPi-Set_software | Global software password successfully changed  [ INFO ] DietPi-Set_software | "root" and "dietpi" login password successfully changed  [ OK ] passwords | Completed  [ ] DietPi-Software | mount -o remount /var/log.  [ OK ] DietPi-Software | mount -o remount /var/log  [ SUB1 ] DietPi-Set_software > ntpd-mode (2)  [ INFO ] DietPi-Set_software | Checking for required APT packages: systemd-timesyncd  [ ] DietPi-Set_software | systemctl unmask systemd-timesyncd. ..  ..  ..  ..  .. . [ OK ] DietPi-Set_software | systemctl unmask systemd-timesyncd  [ ] DietPi-Set_software | systemctl enable systemd-timesyncd. ..  ..  ..  ..  .. [ OK ] DietPi-Set_software | systemctl enable systemd-timesyncd  [ ] DietPi-Set_software | systemctl stop systemd-timesyncd.  [ OK ] DietPi-Set_software | systemctl stop systemd-timesyncd  [ OK ] DietPi-Set_software | Desired setting in /boot/dietpi.txt was already set: CONFIG_NTP_MODE=2  [ OK ] ntpd-mode 2 | Completed  [ OK ] DietPi-Software | Added setting INDEX_LOGGING=-1 to end of file /boot/dietpi/.installed  [ OK ] DietPi-Software | Applied initial first run setup steps  )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││Help! : Links to online guides, docs and information (B││DietPi-Config: Feature-rich configuration tool for your device││●─ Select Software ─────────────────────────────●││Search Software : Find software to install via search box││Browse Software : Select software from the full list││SSH Server: [Dropbear]││Log System: [DietPi-RAMlog #1]││User Data Location : [SD/eMMC | /mnt/dietpi_userdata]││●─ Install or Remove Software ──────────────────●││Uninstall: Select installed software for removal││Install: Go >> Start installation for selected software│││││││││└──────────────────────────────────────────────────────────────────────────────┘Help! : Links to online guides, docs and information DietPi-Config : Feature-rich configuration tool for your device(BDietPi-Config : Feature-rich configuration tool for your device ●─ Select Software ─────────────────────────────●(B ●─ Select Software ─────────────────────────────●Search Software : Find software to install via search box (BSearch Software : Find software to install via search box Browse Software : Select software from the full list (BBrowse Software : Select software from the full list SSH Server : [Dropbear] Browse Software : Select software from the full list (BSSH Server : [Dropbear] [?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 | Use spacebar to toggle select│ Please use the spacebar to select the software you wish to install. Then │ press ENTER/RETURN or select to confirm. │ - Press ESC or select to discard changes made. │ - Software and usage details: https://dietpi.com/docs/software/ │ │ [ (B]●─ Desktops ────────────────────────────────────────────────────────│ [ ] 23 LXDE: ultra lightweight desktop │ [ ] 24 MATE: desktop enviroment │ [ ] 25 Xfce: lightweight desktop │ [ ] 26 GNUstep: lightweight desktop based on OpenStep │ [ ] 173 LXQt: lightweight desktop │ [ ]●─ Remote Desktop ──────────────────────────────────────────────────│ [ ] 28 TigerVNC Server: desktop for remote connection │ [ ] 29 XRDP: remote desktop protocol (rdp) server │ [ ] 30 NoMachine: multi-platform server and client access │ [ ]●─ Media Systems ───────────────────────────────────────────────────│ [ ] 31 Kodi: The media centre for Linux │ [ ] 32 ympd: lightweight web interface music player for mpd │ [ ] 33 Airsonic-Advanced: Web interface media streaming server │ │ ││└──────────────────────────────────────────────────────────────────────────────┘┘─  (B   (B  (B   (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B│ [ ] 33 Airsonic-Advanced: Web interface media streaming server6 Squeezelite: audio player for LMS & Squeezebox│ [ ] 36 Squeezelite: audio player for LMS & Squeezebox7 Shairport Sync: AirPlay audio player with multiroom sync│ [ ] 37 Shairport Sync: AirPlay audio player with multiroom sync9 ReadyMedia: (MiniDLNA) media streaming server (dlna, upnp)│ [ ] 39 ReadyMedia: (MiniDLNA) media streaming server (dlna, upnp)40 Ampache: web interface │ [ ] 40 Ampache: web interface media streaming server1 Emby: web interface media streaming server│ [ ] 41 Emby: web interface media streaming server2 Plex Media Server: web interface media streaming server│ [ ] 42 Plex Media Server: web interface media streaming server3 Murmur: mumble voip server│ [ ] 43 Murmur: mumble voip server80 Ubooquity: free home server for your comics and ebooks library│ [ ] 80 Ubooquity: free home server for your comics and ebooks library6 Roon Extension Manager: manage extensions from within Roon│ [ ] 86 Roon Extension Manager: manage extensions from within Roon118 Mopidy: Web interface music & radio player│ [ ] 118 Mopidy: Web interface music & radio player9 CAVA: Console audio visualisation for MPD│ [ ] 119 CAVA: Console audio visualisation for MPD21 Roon Bridge: Turns device into Roon capable audio player│ [ ] 121 Roon Bridge: Turns device into Roon capable audio player4 NAA daemon: signalyst network audio adaptor (naa)│ [ ] 124 NAA daemon: signalyst network audio adaptor (naa)8 MPD: music player daemon│ [ ] 128 MPD: music player daemon9 O!MPD: Feature-rich, web interface audio player for MPD│ [ ] 129 O!MPD: Feature-rich, web interface audio player for MPD35 IceCast: Shoutcast streaming server (+DarkIce)│ [ ] 135 IceCast: Shoutcast streaming server (+DarkIce)43 Koel: web interface audio streamer│ [ ] 42 Plex Media Server: web interface media streaming server▒3 Murmur: mumble voip server ▮│ [ ] 143 Koel: web interface audio streamer6 Tautulli: monitoring and tracking tool for Plex2 Plex Media Server: web interface media streaming server3 Murmur: mumble voip server│ [ ] 146 Tautulli: monitoring and tracking tool for Plex8 myMPD: fork of ympd with improved features│ [ ] 148 myMPD: fork of ympd with improved features63 GMediaRender: Resource efficient UPnP/DLNA renderer│ [ ] 163 GMediaRender: Resource efficient UPnP/DLNA renderer7 Raspotify: Spotify connect client│ [ ] 167 Raspotify: Spotify connect client78 Jellyfin: FOSS web interface media streaming server│ [ ] 178 Jellyfin: FOSS web interface media streaming server9 Komga: free and open source comics/mangas media server with web UI│ [ ] 179 Komga: free and open source comics/mangas media server with web UI90 Beets: music organizer and manager│ [ ] 190 Beets: music organizer and manager1 Snapcast Server: Multiroom audio server│ [ ] 191 Snapcast Server: Multiroom audio server2 Clientclient│ [ ] 192 Snapcast Client: Multiroom audio client204 Navidrome: Web interface media streaming server│ [ ] 204 Navidrome: Web interface media streaming server12 Kavita: open source comics/mangas/ebooks media server with a built-i│ [ ] 212 Kavita: open source comics/mangas/ebooks media server with a built-i ●─ BitTorrent & Download ───────────────────────────────────────────│ [ ]●─ BitTorrent & Download ───────────────────────────────────────────44 Transmission: BitTorrent server with web interface (C)│ [ ] 44 Transmission: BitTorrent server with web interface (C)5 Deluge: BitTorrent server with web interface (Python)│ [ ] 45 Deluge: BitTorrent server with web interface (Python)6 qBittorrent: BitTorrent server with web interface (C++)│ [ ] 46 qBittorrent: BitTorrent server with web interface (C++)106 Lidarr: Automatically download music│ [ ] 106 Lidarr: Automatically download music7 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)│ [ ] 107 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)16 Medusa: Automatic video library manager for TV shows│ [ ] 191 Snapcast Server: Multiroom audio server▒2 Clientclient▮│ [ ] 116 Medusa: Automatic video library manager for TV shows32 Aria2: Download manager with web interface│ [ ] 191 Snapcast Server: Multiroom audio server2 Clientclient│ [ ] 132 Aria2: Download manager with web interface9 SABnzbd: NZB download manager│ [ ] 139 SABnzbd: NZB download manager44 Sonarr: Automatically download TV shows│ [ ] 144 Sonarr: Automatically download TV shows5 Radmovies│ [ ] 145 Radarr: Automatically download movies7 Jackett: API support for your torrent trackers│ [ ] 147 Jackett: API support for your torrent trackers9 NZBGet: NZB download manager│ [ ] 149 NZBGet: NZB download manager51 Prowlarr: Indexer manager & proxy for PVR│ [ ] 151 Prowlarr: Indexer manager & proxy for PVR5 HTPC Manager: Manage your HTPC from anywhere│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere80 Bazarr: Automatically download subtitles│ [ ] 180 Bazarr: Automatically download subtitles95 youtube-dl: Download videos from YouTube and other sites (using yt-d│ [ ] 195 youtube-dl: Download videos from YouTube and other sites (using yt-d203 Readarr: Ebook and audiobook collection manager│ [ ] 203 Readarr: Ebook and audiobook collection manager ●─ Cloud & Backup ──────────────────────────────────────────────────│ [ ]●─ Cloud & Backup ──────────────────────────────────────────────────48 Pydio: Feature-rich backup and sync server│ [ ] 48 Pydio: Feature-rich backup and sync server9 Gogs: Personal Git server with web interface│ [ ] 49 Gogs: Personal Git server with web interface50 Syncthing: Backup and sync server with web interface│ [ ] 50 Syncthing: Backup and sync server with web interface111 UrBackup Server: Full system backup server│ [ ] 111 UrBackup Server: Full system backup server4 Nextcloud: File sync, sharing and collaboration platform│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere▒80 Bazarr: Automatically download subtitles ▮│ [ ] 114 Nextcloud: File sync, sharing and collaboration platform58 MinIO: S3 compatible distributed object server│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere80 Bazarr: Automatically download subtitles│ [ ] 158 MinIO: S3 compatible distributed object server65 Gitea: Git with a cup of tea│ [ ] 165 Gitea: Git with a cup of tea8 Nextcloud Talk: Video calls with configured Coturn server│ [ ] 168 Nextcloud Talk: Video calls with configured Coturn server83 vaultwarden: Unofficial Bitwarden password manager written in│ [ ] 183 vaultwarden: Unofficial Bitwarden password manager server written in98 File Browser: web based file manager│ [ ] 198 File Browser: web based file manager202 Rclone: Utility to sync your files to cloud storages│ [ ] 202 Rclone: Utility to sync your files to cloud storages9 Restic: Fast, efficient and secure command-line backup program│ [ ] 209 Restic: Fast, efficient and secure command-line backup program ●─ Gaming & Emulation ──────────────────────────────────────────────│ [ ]●─ Gaming & Emulation ──────────────────────────────────────────────52 Cuberite: Minecraft server with web interface (C++)│ [ ] 52 Cuberite: Minecraft server with web interface (C++)3 MineOS: Minecraft servers with web interface (Java/Node.js)│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js)108 Amiberry: Optimised Amiga emulator for ARM-based SoCs│ [ ] 108 Amiberry: Optimised Amiga emulator for ARM-based SoCs64 Nukkit: A nuclear-powered server for Minecraft Pocket Edition│ [ ] 164 Nukkit: A nuclear-powered server for Minecraft Pocket Edition81 PaperMC: Highly optimised Minecraft server with plugins, written in│ [ ] 181 PaperMC: Highly optimised Minecraft server with plugins, written in97 Box64: x86_64 userspace emulation│ [ ] 197 Box64: x86_64 userspace emulation ●─ Social & Search ─────────────────────────────────────────────────│ [ ]●─ Social & Search ─────────────────────────────────────────────────16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro│ [ ] 16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro38 FreshRSS: self-hosted RSS feed aggregator│ [ ] 38 FreshRSS: self-hosted RSS feed aggregator54 phpBB: bulletin board forum software│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js) ▒108 Amiberry: Optimised Amiga emulator for ARM-based SoCs ▮│ [ ] 54 phpBB: bulletin board forum software5 WordPress: website blog and publishing platform│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js)108 Amiberry: Optimised Amiga emulator for ARM-based SoCs│ [ ] 55 WordPress: website blog and publishing platform6 Single File PHP Gallery: Website to host and browse your images│ [ ] 56 Single File PHP Gallery: Website to host and browse your images7 Baïkal: lightweight caldav + carddav server│ [ ] 57 Baïkal: lightweight caldav + carddav server125 Synapse: Matrix homeserver implementation│ [ ] 125 Synapse: Matrix homeserver implementation210 MediaWiki: A collaboration and documentation platform│ [ ] 210 MediaWiki: A collaboration and documentation platform ●─ Camera & Surveillance ───────────────────────────────────────────│ [ ]●─ Camera & Surveillance ───────────────────────────────────────────136 motionEye: Web interface & surveillance for your camera│ [ ] 136 motionEye: Web interface & surveillance for your camera7 mjpg-streamer: Simple camera streaming tool with HTML plugin│ [ ] 137 mjpg-streamer: Simple camera streaming tool with HTML plugin ●─ System Stats & Management ───────────────────────────────────────│ [ ]●─ System Stats & Management ───────────────────────────────────────63 LinuxDash: web interface system stats│ [ ] 63 LinuxDash: web interface system stats4 phpSysInfo: web interface system stats│ [ ] 64 phpSysInfo: web interface system stats5 Netdata: real-time performance monitoring│ [ ] 65 Netdata: real-time performance monitoring99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me│ [ ] 99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me115 Webmin: web interface system management│ [ ] 115 Webmin: web interface system management34 Docker Compose: Manage multi-container Docker applications│ [ ] 134 Docker Compose: Manage multi-container Docker applications42 MicroK8s: The simplest production-grade upstream K8s, light and focu│ [ ] 142 MicroK8s: The simplest production-grade upstream K8s, light and focu62 Docker: Build, ship, and run distributed applications (B  (B   (B  (B│ [ ] 162 Docker: Build, ship, and run distributed applications85 Portainer: Simplifies container management in Docker (standalone hos│ [ ] 64 phpSysInfo: web interface system stats▒5 Netdata: real-time performance monitoring▮│ [ ] 185 Portainer: Simplifies container management in Docker (standalone hos93 K3s: The certified Kubernetes distribution built for IoT & Edge comp│ [ ] 64 phpSysInfo: web interface system stats5 Netdata: real-time performance monitoring│ [ ] 193 K3s: The certified Kubernetes distribution built for IoT & Edge comp200 DietPi-Dashboard: Official lightweight DietPi web interface (Rust)│ [ ] 200 DietPi-Dashboard: Official lightweight DietPi web interface (Rust)5 Homer: Simple HOMepage for your servER to keep your services on hand (B  (B  (B  (B *(B* (B  (B  (B  (B│ [ ] 205 Homer: Simple HOMepage for your servER to keep your services on hand ●─ Remote Access ───────────────────────────────────────────────────│ [ ]●─ Remote Access ───────────────────────────────────────────────────68 Remote.It: Provides secure connections to your networked devices (B  (B  (B   (B  (B  (B│ [ ] 68 Remote.It: Provides secure connections to your networked devices138 VirtualHere: server: share USB devices over the network│ [ ] 138 VirtualHere: server: share USB devices over the network ●─ Hardware Projects ───────────────────────────────────────────────│ [ ]●─ Hardware Projects ───────────────────────────────────────────────77 Grafana: platform for analytics and monitoring│ [ ] 77 Grafana: platform for analytics and monitoring122 Node-RED: tool for wiring devices, APIs and online services│ [ ] 122 Node-RED: tool for wiring devices, APIs and online services3 Mosquitto: MQTT messaging broker (B  (B  (B  (B  (B   (B  (B  (B  (B  (B│ [ ] 123 Mosquitto: MQTT messaging broker31 Blynk Server: msg controller for blynk mobile app and sbcs│ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs76 Mycroft AI: Open Source Voice Assistant│ [ ] 176 Mycroft AI: Open Source Voice Assistant ●─ System Security ─────────────────────────────────────────────────│ [ ]●─ System Security ─────────────────────────────────────────────────73 Fail2Ban: prevents brute-force attacks with ip ban│ [ ] 73 Fail2Ban: prevents brute-force attacks with ip ban ●─ Webserver Stacks ────────────────────────────────────────────────│ [ ]●─ Webserver Stacks ────────────────────────────────────────────────75 LASP: Apache + SQLite + PHP│ [ ] 75 LASP: Apache + SQLite + PHP6 LAMMariaDB │ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs▒76 Mycroft AI: Open Source Voice Assistant ▮│ [ ] 76 LAMP: Apache + MariaDB + PHP8 LESP: Nginx + SQLite │ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs76 Mycroft AI: Open Source Voice Assistant│ [ ] 78 LESP: Nginx + SQLite + PHP9 LEMMariaDB │ [ ] 79 LEMP: Nginx + MariaDB + PHP81 LLSP: Lighttpd + SQLite │ [ ] 81 LLSP: Lighttpd + SQLite + PHP2 LLMMariaDB │ [ ] 82 LLMP: Lighttpd + MariaDB + PHP92 Certbot: Obtain and renew Let's Encrypt SSL certs for HTTPS│ [ ] 92 Certbot: Obtain and renew Let's Encrypt SSL certs for HTTPS ●─ DNS Servers ─────────────────────────────────────────────────────│ [ ]●─ DNS Servers ─────────────────────────────────────────────────────93 Pi-hole: block adverts for any device on your network│ [ ] 93 Pi-hole: block adverts for any device on your network126 AdGuard Home: powerful network-wide ads & trackers blocking DNS serv│ [ ] 126 AdGuard Home: powerful network-wide ads & trackers blocking DNS serv82 Unbound: validating, recursive, caching DNS resolver│ [ ] 182 Unbound: validating, recursive, caching DNS resolver ●─ File Servers ────────────────────────────────────────────────────│ [ ]●─ File Servers ────────────────────────────────────────────────────94 ProFTPD: Efficient, lightweight FTP server│ [ ] 94 ProFTPD: Efficient, lightweight FTP server5 vsftpd: Very secure FTP server│ [ ] 95 vsftpd: Very secure FTP server6 Samba Server: Feature-rich SMB/CIFS server│ [ ] 96 Samba Server: Feature-rich SMB/CIFS server109 NFS Server: Network File System server│ [ ] 109 NFS Server: Network File System server ●─ VPN Servers ─────────────────────────────────────────────────────│ [ ]●─ VPN Servers ─────────────────────────────────────────────────────58 Tailscale: Zero config VPN│ [ ] 58 Tailscale: Zero config VPN97 OpenVPN: vpn server│ [ ] 97 OpenVPN: vpn server117 PiVPN: openvpn/wireguard server install & management tool│ [ ] 96 Samba Server: Feature-rich SMB/CIFS server▒109 NFS Server: Network File System server ▮ │ [ ] 117 PiVPN: openvpn/wireguard server install & management tool72 WireGuard: an extremely simple yet fast and modern VPN│ [ ] 96 Samba Server: Feature-rich SMB/CIFS server109 NFS Server: Network File System server│ [ ] 172 WireGuard: an extremely simple yet fast and modern VPN201 ZeroTier: Free easy to deploy cloud-hosted VPN service│ [ ] 201 ZeroTier: Free easy to deploy cloud-hosted VPN service ●─ Advanced Networking ─────────────────────────────────────────────│ [ ]●─ Advanced Networking ─────────────────────────────────────────────60 WiFi Hotspot: turn your device into a WiFi hotspot│ [ ] 60 WiFi Hotspot: turn your device into a WiFi hotspot1 Tor Hotspot: optional: route hotspot traffic through tor│ [ ] 61 Tor Hotspot: optional: route hotspot traffic through tor98 HAProxy: high performance TCP/HTTP load balancer│ [ ] 98 HAProxy: high performance TCP/HTTP load balancer171 frp: reverse proxy│ [ ] 171 frp: reverse proxy ●─ Home Automation ─────────────────────────────────────────────────│ [ ]●─ Home Automation ─────────────────────────────────────────────────27 TasmoAdmin: Website to manage ESP8266 devices flashed with Tasmota│ [ ] 27 TasmoAdmin: Website to manage ESP8266 devices flashed with Tasmota157 Home Assistant: Open source home automation platform│ [ ] 157 Home Assistant: Open source home automation platform206 openHAB: Vendor and technology agnostic FLOSS home automation softwa│ [ ] 206 openHAB: Vendor and technology agnostic FLOSS home automation softwa11 Homebridge: Bringing HomeKit support where there is none│ [ ] 211 Homebridge: Bringing HomeKit support where there is none ●─ Printing ────────────────────────────────────────────────────────│ [ ]●─ Printing ────────────────────────────────────────────────────────153 OctoPrint: web interface for controlling 3d printers│ [ ] 153 OctoPrint: web interface for controlling 3d printers87 CUPS: common UNIX printing system│ [ ] 187 CUPS: common UNIX printing system ●─ Distributed Projects ────────────────────────────────────────────│ [ ]●─ Distributed Projects ────────────────────────────────────────────2 Folding@Home: Help desease research with your computing power!│ [ ] 2 Folding@Home: Help desease research with your computing power!133 YaCy: decentralised open source search engine│ [ ] 153 OctoPrint: web interface for controlling 3d printers▒87 CUPS: common UNIX printing system ▮ │ [ ] 133 YaCy: decentralised open source search engine41 ADS-B Feeder: track airplanes using SDRs and feed the data to ADS-B│ [ ] 153 OctoPrint: web interface for controlling 3d printers87 CUPS: common UNIX printing system │ [ ] 141 ADS-B Feeder: track airplanes using SDRs and feed the data to ADS-B84 Tor Relay: add a node to the Tor network│ [ ] 184 Tor Relay: add a node to the Tor network6 IPFS Node: contributa decentralized internet│ [ ] 186 IPFS Node: contribute to a decentralized internet ●─ SSH Clients ─────────────────────────────────────────────────────│ [ ]●─ SSH Clients ─────────────────────────────────────────────────────0 OpenSSH Client: Feature-rich SSH, SFTP and SCP client│ [ ] 0 OpenSSH Client: Feature-rich SSH, SFTP and SCP client ●─ File Server Clients ─────────────────────────────────────────────│ [ ]●─ File Server Clients ─────────────────────────────────────────────1 Samba Client: access SMB/CIFS/Samba network shares│ [ ] 1 Samba Client: access SMB/CIFS/Samba network shares10 NFS Client: network file system client│ [ ] 110 NFS Client: network file system client ●─ File Managers ───────────────────────────────────────────────────│ [ ]●─ File Managers ───────────────────────────────────────────────────3 MC: Midnight Commander - a powerful file manager (B  (B  (B  (B  (B   (B   (B  (B   (B  (B  (B  (B  (B│ [ ] 3 MC: Midnight Commander - a powerful file manager4 ViFM: file manager with vi bindings│ [ ] 4 ViFM: file manager with vi bindings ●─ System ──────────────────────────────────────────────────────────│ [ ]●─ System ──────────────────────────────────────────────────────────5 ALSA: Advanced Linux Sound Architecture│ [ ] 5 ALSA: Advanced Linux Sound Architecture6 X.Org X Server: aka X11 - X Window System implementation│ [ ] 6 X.Org X Server: aka X11 - X Window System implementation7 FFmpeg: Audio & video codec libary and programs│ [ ] 7 FFmpeg: Audio & video codec libary and programs170 UnRAR: unarchiver for .rar files│ [ ] 170 UnRAR: unarchiver for .rar files ●─ Databases & Data Stores ─────────────────────────────────────────│ [ ] 6 X.Org X Server: aka X11 - X Window System implementation▒7 FFmpeg: Audio & video codec libary and programs ▮ │ [ ]●─ Databases & Data Stores ─────────────────────────────────────────74 InfluxDB: Persistent time-series database server│ [ ] 6 X.Org X Server: aka X11 - X Window System implementation7 FFmpeg: Audio & video codec libary and programs │ [ ] 74 InfluxDB: Persistent time-series database server87 SQLite: Persistent single-file database system│ [ ] 87 SQLite: Persistent single-file database system8 MariaDB: Persistent cached file-per-table database server│ [ ] 88 MariaDB: Persistent cached file-per-table database server90 phpMyAdmin: Optional MariaDB web interface admin tools│ [ ] 90 phpMyAdmin: Optional MariaDB web interface admin tools1 Redis: Volatile in-memory non-SQL database server│ [ ] 91 Redis: Volatile in-memory non-SQL database server194 PostgreSQL: Persistent advanced object-relational database server│ [ ] 194 PostgreSQL: Persistent advanced object-relational database server ●─ Network Tools ───────────────────────────────────────────────────│ [ ]●─ Network Tools ───────────────────────────────────────────────────10 iftop: displays bandwidth usage information│ [ ] 10 iftop: displays bandwidth usage information1 IPTraf: interactive colorful IP LAN monitor│ [ ] 11 IPTraf: interactive colorful IP LAN monitor2 Iperf: internet protocol bandwidth measuring tool│ [ ] 12 Iperf: internet protocol bandwidth measuring tool3 MTR-Tiny: full screen ncurses traceroute tool│ [ ] 13 MTR-Tiny: full screen ncurses traceroute tool4 nLoad: realtime console network usage monitor│ [ ] 14 nLoad: realtime console network usage monitor5 tcpdump: command-line network traffic analyzer│ [ ] 15 tcpdump: command-line network traffic analyzer2 Avahi-Daemon: Hostname broadcast via mDNS (Zeroconf, Bonjour)│ [ ] 152 Avahi-Daemon: Hostname broadcast via mDNS (Zeroconf, Bonjour) ●─ Development & Programming ───────────────────────────────────────│ [ ]●─ Development & Programming ───────────────────────────────────────8 Java JDK: OpenJDK Development Kit│ [ ] 8 Java JDK: OpenJDK Development Kit9 Node.js: JavaScript runtime environment│ [ ] 9 Node.js: JavaScript runtime environment17 Git: Clone and manage Git repositories locally│ [ ] 8 Java JDK: OpenJDK Development Kit▒9 Node.js: JavaScript runtime environment▮17 Git: Clone and manage Git repositories locally34 PHP Composer: Package manager for PHP│ [ ] 8 Java JDK: OpenJDK Development Kit9 Node.js: JavaScript runtime environment │ [ ] 34 PHP Composer: Package manager for PHP130 Python 3: Runtime system, pip package installer and development head│ [ ] 130 Python 3: Runtime system, pip package installer and development head50 Mono: Runtime libraries and repository│ [ ] 150 Mono: Runtime libraries and repository88 Go: Runtime environment and package installer│ [ ] 188 Go: Runtime environment and package installer9 VSCodium: FLOSS version of MS VSCode│ [ ] 189 VSCodium: FLOSS version of MS VSCode96 Java JRE: OpenJDK Runtime Environment│ [ ] 196 Java JRE: OpenJDK Runtime Environment ●─ Text Editors ────────────────────────────────────────────────────│ [ ]●─ Text Editors ────────────────────────────────────────────────────18 Emacs: GNU Emacs editor│ [ ] 18 Emacs: GNU Emacs editor9 Jed: editor for programmers│ [ ] 19 Jed: editor for programmers20 Vim: vi enhanced text editor│ [ ] 20 Vim: vi enhanced text editor1 Vim-Tiny: compact release of vim│ [ ] 21 Vim-Tiny: compact release of vim127 Neovim: heavily refactored vim fork│ [ ] 127 Neovim: heavily refactored vim fork ●─ Desktop Utilities ───────────────────────────────────────────────│ [ ]●─ Desktop Utilities ───────────────────────────────────────────────22 QuiteRSS: cross-platform, free rss reader│ [ ] 22 QuiteRSS: cross-platform, free rss reader67 Firefox: web browser for desktop│ [ ] 67 Firefox: web browser for desktop113 Chromium: web browser for desktop or autostart (B  (B  (B  (B  (B  (B  (B   *(B* (B  (B  (B  (B  (B  (B│ [ ] 113 Chromium: web browser for desktop or autostart74 GIMP: mspaint on steroids│ [ ] 113 Chromium: web browser for desktop or autostart▒74 GIMP: mspaint on steroids ▮5 Xfce Power Manager: with brightness control, recommended for LXDE/LX (B  (B  (B  (B  (B  (B  (B *(B  (B* (B  (B  (B  (B 8 Go: Runtime environment and package installer │ [ ] 189 VSCodium: FLOSS version of MS VSCode│ [ ] 67 Firefox: web browser for desktop▮4 GIMP: mspaint on steroids50 Mono: Runtime libraries and repository │ [ ] 188 Go: Runtime environment and package installer67 Firefox: web browser for desktop13 Chromium: web browser for desktop or autostart30 Python 3: Runtime system, pip package installer and development head│ [ ] 150 Mono: Runtime libraries and repository34 PHP Composer: Package manager for PHP │ [ ] 130 Python 3: Runtime system, pip package installer and development head17 Git: Clone and manage Git repositories locally │ [ ] 34 PHP Composer: Package manager for PHP9 Node.js: JavaScript runtime environment │ [ ] 17 Git: Clone and manage Git repositories locally8 Java JDK: OpenJDK Development Kit │ [ ] 9 Node.js: JavaScript runtime environment ●─ Development & Programming ───────────────────────────────────────│ [ ] 8 Java JDK: OpenJDK Development Kit152 Avahi-Daemon: Hostname broadcast via mDNS (Zeroconf, Bonjour) │ [ ]●─ Development & Programming ─────────────────────────────────────── tcpdump: command-line network traffic analyzer │ [ ] 152 Avahi-Daemon: Hostname broadcast via mDNS (Zeroconf, Bonjour)4 nLoad: realtime console network usage monitor │ [ ] 15 tcpdump: command-line network traffic analyzer3 MTR-Tiny: full screen ncurses traceroute tool │ [ ] 14 nLoad: realtime console network usage monitor2 Iperf: internet protocol bandwidth measuring tool │ [ ] 13 MTR-Tiny: full screen ncurses traceroute tool1 IPTraf: interactive colorful IP LAN monitor │ [ ] 12 Iperf: internet protocol bandwidth measuring tool0 iftop: displays bandwidth usage information │ [ ] 11 IPTraf: interactive colorful IP LAN monitor ●─ Network Tools ───────────────────────────────────────────────────│ [ ] 10 iftop: displays bandwidth usage information194 PostgreSQL: Persistent advanced object-relational database server │ [ ]●─ Network Tools ───────────────────────────────────────────────────91 Redis: Volatile in-memory non-SQL database server │ [ ] 194 PostgreSQL: Persistent advanced object-relational database server ●─ Development & Programming ──────────────────────────────────▮────│ [ ] 8 Java JDK: OpenJDK Development Kit▒0 phpMyAdmin: Optional MariaDB web interface admin tools │ [ ] 91 Redis: Volatile in-memory non-SQL database server ●─ Development & Programming ───────────────────────────────────────│ [ ] 8 Java JDK: OpenJDK Development Kit88 MariaDB: Persistent cached file-per-table database server │ [ ] 90 phpMyAdmin: Optional MariaDB web interface admin tools7 SQLite: Persistent single-file database system │ [ ] 88 MariaDB: Persistent cached file-per-table database server74 InfluxDB: Persistent time-series database server │ [ ] 87 SQLite: Persistent single-file database system ●─ Databases & Data Stores ─────────────────────────────────────────│ [ ] 74 InfluxDB: Persistent time-series database server170 UnRAR: unarchiver for .rar files │ [ ]●─ Databases & Data Stores ─────────────────────────────────────────7 FFmpeg: Audio & video codec libary and programs │ [ ] 170 UnRAR: unarchiver for .rar files6 X.Org X Server: aka X11 - X Window System implementation │ [ ] 7 FFmpeg: Audio & video codec libary and programs5 ALSA: Advanced Linux Sound Architecture │ [ ] 6 X.Org X Server: aka X11 - X Window System implementation ●─ System ──────────────────────────────────────────────────────────│ [ ] 5 ALSA: Advanced Linux Sound Architecture4 ViFM: file manager with vi bindings │ [ ]●─ System ──────────────────────────────────────────────────────────3 MC: Midnight Commander - a powerful file manager │ [ ] 4 ViFM: file manager with vi bindings ●─ File Managers ───────────────────────────────────────────────────│ [ ] 3 MC: Midnight Commander - a powerful file manager110 NFS Client: network file system client │ [ ]●─ File Managers ─────────────────────────────────────────────────── Samba Client: access SMB/CIFS/Samba network shares │ [ ] 110 NFS Client: network file system client ●─ File Server Clients ─────────────────────────────────────────────│ [ ] 1 Samba Client: access SMB/CIFS/Samba network shares0 OpenSSH Client: Feature-rich SSH, SFTP and SCP client │ [ ]●─ File Server Clients ───────────────────────────────────────────── ●─ SSH Clients ─────────────────────────────────────────────────────│ [ ] 0 OpenSSH Client: Feature-rich SSH, SFTP and SCP client5 ALSA: Advanced Linux Sound Architecture ▮ │ [ ] 6 X.Org X Server: aka X11 - X Window System implementation▒186 IPFS Node: contribute to a decentralized internet │ [ ]●─ SSH Clients ─────────────────────────────────────────────────────5 ALSA: Advanced Linux Sound Architecture │ [ ] 6 X.Org X Server: aka X11 - X Window System implementation4 Tor Relay: add a nodthe Tor network │ [ ] 186 IPFS Node: contribute to a decentralized internet41 ADS-B Feeder: track airplanes using SDRs and feed the data to ADS-B │ [ ] 184 Tor Relay: add a node to the Tor network33 YaCy: decentralised open source search engine │ [ ] 141 ADS-B Feeder: track airplanes using SDRs and feed the data to ADS-B2 Folding@Home: Help desease research with your computing power! │ [ ] 133 YaCy: decentralised open source search engine ●─ Distributed Projects ────────────────────────────────────────────│ [ ] 2 Folding@Home: Help desease research with your computing power!187 CUPS: common UNIX printing system │ [ ]●─ Distributed Projects ────────────────────────────────────────────53 OctoPrint: web interface for controlling 3d printers │ [ ] 187 CUPS: common UNIX printing system ●─ Printing ────────────────────────────────────────────────────────│ [ ] 153 OctoPrint: web interface for controlling 3d printers211 Homebridge: Bringing HomeKit support where there is none │ [ ]●─ Printing ────────────────────────────────────────────────────────06 openHAB: Vendor and technology agnostic FLOSS home automation softwa│ [ ] 211 Homebridge: Bringing HomeKit support where there is none157 Home Assistant: Open source home automation platform │ [ ] 206 openHAB: Vendor and technology agnostic FLOSS home automation softwa27 TasmoAdmin: Website to manage ESP8266 devices flashed with Tasmota │ [ ] 157 Home Assistant: Open source home automation platform ●─ Home Automation ─────────────────────────────────────────────────│ [ ] 27 TasmoAdmin: Website to manage ESP8266 devices flashed with Tasmota171 frp: reverse proxy │ [ ]●─ Home Automation ─────────────────────────────────────────────────98 HAProxy: high performance TCP/HTTP load balancer │ [ ] 171 frp: reverse proxy61 Tor Hotspot: optional: route hotspot traffic through tor │ [ ] 98 HAProxy: high performance TCP/HTTP load balancer ●─ Printing ───────────────────────────────────────────────────▮────│ [ ] 153 OctoPrint: web interface for controlling 3d printers▒0 WiFi Hotspot: turn your device into a WiFi hotspot │ [ ] 61 Tor Hotspot: optional: route hotspot traffic through tor ●─ Printing ────────────────────────────────────────────────────────│ [ ] 153 OctoPrint: web interface for controlling 3d printers ●─ Advanced Networking ─────────────────────────────────────────────│ [ ] 60 WiFi Hotspot: turn your device into a WiFi hotspot201 ZeroTier: Free easy to deploy cloud-hosted VPN service │ [ ]●─ Advanced Networking ─────────────────────────────────────────────172 WireGuard: an extremely simple yet fast and modern VPN │ [ ] 201 ZeroTier: Free easy to deploy cloud-hosted VPN service17 PiVPN: openvpn/wireguard server install & management tool │ [ ] 172 WireGuard: an extremely simple yet fast and modern VPN97 OpenVPN: vpn server │ [ ] 117 PiVPN: openvpn/wireguard server install & management tool58 Tailscale: Zero config VPN │ [ ] 97 OpenVPN: vpn server ●─ VPN Servers ─────────────────────────────────────────────────────│ [ ] 58 Tailscale: Zero config VPN109 NFS Server: Network File System server │ [ ]●─ VPN Servers ─────────────────────────────────────────────────────96 Samba Server: Feature-rich SMB/CIFS server │ [ ] 109 NFS Server: Network File System server5 vsftpd: Very secure FTP server │ [ ] 96 Samba Server: Feature-rich SMB/CIFS server4 ProFTPD: Efficient, lightweight FTP server │ [ ] 95 vsftpd: Very secure FTP server ●─ File Servers ────────────────────────────────────────────────────│ [ ] 94 ProFTPD: Efficient, lightweight FTP server182 Unbound: validating, recursive, caching DNS resolver │ [ ]●─ File Servers ────────────────────────────────────────────────────26 AdGuard Home: powerful network-wide ads & trackers blocking DNS serv│ [ ] 182 Unbound: validating, recursive, caching DNS resolver93 Pi-hole: block adverts for any device on your network │ [ ] 126 AdGuard Home: powerful network-wide ads & trackers blocking DNS serv ●─ DNS Servers ─────────────────────────────────────────────────────│ [ ] 93 Pi-hole: block adverts for any device on your network92 Certbot: Obtain and renew Let's Encrypt SSL certs for HTTPS │ [ ]●─ DNS Servers ─────────────────────────────────────────────────────5 vsftpd: Very secure FTP server ▮ │ [ ] 96 Samba Server: Feature-rich SMB/CIFS server▒82 LLMP: Lighttpd + MariaDB + PHP │ [ ] 92 Certbot: Obtain and renew Let's Encrypt SSL certs for HTTPS5 vsftpd: Very secure FTP server │ [ ] 96 Samba Server: Feature-rich SMB/CIFS server1 LLSSQLite │ [ ] 82 LLMP: Lighttpd + MariaDB + PHP79 LEMP: Nginx + MariaDB │ [ ] 81 LLSP: Lighttpd + SQLite + PHP8 LESSQLite │ [ ] 79 LEMP: Nginx + MariaDB + PHP6 LAMP: Apache + MariaDB │ [ ] 78 LESP: Nginx + SQLite + PHP5 LASSQLite │ [ ] 76 LAMP: Apache + MariaDB + PHP ●─ Webserver Stacks ────────────────────────────────────────────────│ [ ] 75 LASP: Apache + SQLite + PHP73 Fail2Ban: prevents brute-force attacks with ip ban │ [ ]●─ Webserver Stacks ──────────────────────────────────────────────── ●─ System Security ─────────────────────────────────────────────────│ [ ] 73 Fail2Ban: prevents brute-force attacks with ip ban176 Mycroft AI: Open Source Voice Assistant │ [ ]●─ System Security ─────────────────────────────────────────────────31 Blynk Server: msg controller for blynk mobile app and sbcs │ [ ] 176 Mycroft AI: Open Source Voice Assistant23 Mosquitto: MQTT messaging broker │ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs2 Node-RED: tool for wiring devices, APIs and online services │ [ ] 123 Mosquitto: MQTT messaging broker77 Grafana: platform for analytics and monitoring │ [ ] 122 Node-RED: tool for wiring devices, APIs and online services ●─ Hardware Projects ───────────────────────────────────────────────│ [ ] 77 Grafana: platform for analytics and monitoring138 VirtualHere: server: share USB devices over the network │ [ ]●─ Hardware Projects ───────────────────────────────────────────────68 Remote.It: Provides secure connections to your networked devices │ [ ] 138 VirtualHere: server: share USB devices over the network ●─ Remote Access ───────────────────────────────────────────────────│ [ ] 68 Remote.It: Provides secure connections to your networked devices23 Mosquitto: MQTT messaging broker ▮ │ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs▒205 Homer: Simple HOMepage for your servER to keep your services on hand│ [ ]●─ Remote Access ───────────────────────────────────────────────────23 Mosquitto: MQTT messaging broker │ [ ] 131 Blynk Server: msg controller for blynk mobile app and sbcs0 DietPi-Dashboard: Official lightweight DietPi web interface (Rust) │ [ ] 205 Homer: Simple HOMepage for your servER to keep your services on hand193 K3s: The certified Kubernetes distribution built for IoT & Edge comp│ [ ] 200 DietPi-Dashboard: Official lightweight DietPi web interface (Rust)85 Portainer: Simplifies container management in Docker (standalone hos│ [ ] 193 K3s: The certified Kubernetes distribution built for IoT & Edge comp*(B] 162 Docker: Build, ship, and run distributed applications │ [ ] 185 Portainer: Simplifies container management in Docker (standalone hos (B] 142 MicroK8s: The simplest production-grade upstream K8s, light and focu│ [*] 162 Docker: Build, ship, and run distributed applications34 Docker Compose: Manage multi-container Docker applications │ [ ] 142 MicroK8s: The simplest production-grade upstream K8s, light and focu15 Webmin: web interface system management │ [ ] 134 Docker Compose: Manage multi-container Docker applications99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me│ [ ] 115 Webmin: web interface system management65 Netdata: real-time performance monitoring │ [ ] 99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me4 phpSysInfo: web interface system stats │ [ ] 65 Netdata: real-time performance monitoring3 LinuxDash: web interface system stats │ [ ] 64 phpSysInfo: web interface system stats ●─ System Stats & Management ───────────────────────────────────────│ [ ] 63 LinuxDash: web interface system stats137 mjpg-streamer: Simple camera streaming tool with HTML plugin │ [ ]●─ System Stats & Management ───────────────────────────────────────6 motionEye: Web interface & surveillance for your camera │ [ ] 137 mjpg-streamer: Simple camera streaming tool with HTML plugin ●─ Camera & Surveillance ───────────────────────────────────────────│ [ ] 136 motionEye: Web interface & surveillance for your camera210 MediaWiki: A collaboration and documentation platform │ [ ]●─ Camera & Surveillance ───────────────────────────────────────────3 LinuxDash: web interface system stats ▮ │ [ ] 64 phpSysInfo: web interface system stats▒125 Synapse: Matrix homeserver implementation │ [ ] 210 MediaWiki: A collaboration and documentation platform3 LinuxDash: web interface system stats │ [ ] 64 phpSysInfo: web interface system stats57 Baïkal: lightweight caldav + carddav server │ [ ] 125 Synapse: Matrix homeserver implementation6 Single File PHP Gallery: Website to host and browse your images │ [ ] 57 Baïkal: lightweight caldav + carddav server5 WordPress: website blog and publishing platform │ [ ] 56 Single File PHP Gallery: Website to host and browse your images4 phpBB: bulletin board forum software │ [ ] 55 WordPress: website blog and publishing platform38 FreshRSS: self-hosted RSS feed aggregator │ [ ] 54 phpBB: bulletin board forum software16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro│ [ ] 38 FreshRSS: self-hosted RSS feed aggregator ●─ Social & Search ─────────────────────────────────────────────────│ [ ] 16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro197 Box64: x86_64 userspace emulation │ [ ]●─ Social & Search ─────────────────────────────────────────────────81 PaperMC: Highly optimised Minecraft server with plugins, written in │ [ ] 197 Box64: x86_64 userspace emulation64 Nukkit: A nuclear-powered server for Minecraft Pocket Edition │ [ ] 181 PaperMC: Highly optimised Minecraft server with plugins, written in08 Amiberry: Optimised Amiga emulator for ARM-based SoCs │ [ ] 164 Nukkit: A nuclear-powered server for Minecraft Pocket Edition53 MineOS: Minecraft servers with web interface (Java/Node.js) │ [ ] 108 Amiberry: Optimised Amiga emulator for ARM-based SoCs2 Cuberite: Minecraft server with web interface (C++) │ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js) ●─ Gaming & Emulation ──────────────────────────────────────────────│ [ ] 52 Cuberite: Minecraft server with web interface (C++)209 Restic: Fast, efficient and secure command-line backup program │ [ ]●─ Gaming & Emulation ──────────────────────────────────────────────2 Rclone: Utility to sync your files to cloud storages │ [ ] 209 Restic: Fast, efficient and secure command-line backup program198 File Browser: web based file manager │ [ ] 202 Rclone: Utility to sync your files to cloud storages2 Cuberite: Minecraft server with web interface (C++) ▮ │ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js) ▒83 vaultwarden: Unofficial Bitwarden password manager server written in│ [ ] 198 File Browser: web based file manager2 Cuberite: Minecraft server with web interface (C++) │ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js)68 Nextcloud Talk: Video calls with configured Coturn  │ [ ] 183 vaultwarden: Unofficial Bitwarden password manager server written in5 Gitea: Git with a cup of tea │ [ ] 168 Nextcloud Talk: Video calls with configured Coturn server58 MinIO: S3 compatible distributed object server │ [ ] 165 Gitea: Git with a cup of tea14 Nextcloud: File sync, sharing and collaboration platform │ [ ] 158 MinIO: S3 compatible distributed object server1 UrBackup Server: Full system backup server │ [ ] 114 Nextcloud: File sync, sharing and collaboration platform50 Syncthing: Backup and sync server with web interface │ [ ] 111 UrBackup Server: Full system backup server49 Gogs: Personal Git server with web interface │ [ ] 50 Syncthing: Backup and sync server with web interface8 Pydio: Feature-rich backup and sync server │ [ ] 49 Gogs: Personal Git server with web interface ●─ Cloud & Backup ──────────────────────────────────────────────────│ [ ] 48 Pydio: Feature-rich backup and sync server203 Readarr: Ebook and audiobook collection manager │ [ ]●─ Cloud & Backup ──────────────────────────────────────────────────195 youtube-dl: Download videos from YouTube and other sites (using yt-d│ [ ] 203 Readarr: Ebook and audiobook collection manager80 Bazarr: Automatically download subtitles │ [ ] 195 youtube-dl: Download videos from YouTube and other sites (using yt-d55 HTPC Manager: Manage your HTPC from anywhere │ [ ] 180 Bazarr: Automatically download subtitles1 Prowlarr: Indexer manager & proxy for PVR │ [ ] 155 HTPC Manager: Manage your HTPC from anywhere49 NZBGet: NZB download manager │ [ ] 151 Prowlarr: Indexer manager & proxy for PVR7 Jackett: API support for your torrent trackers │ [ ] 149 NZBGet: NZB download manager5 Radarr: Automatically download movies │ [ ] 147 Jackett: API support for your torrent trackers1 Prowlarr: Indexer manager & proxy for PVR ▮ │ [ ] 155 HTPC Manager: Manage your HTPC from anywhere▒4 SonTV shows │ [ ] 145 Radarr: Automatically download movies1 Prowlarr: Indexer manager & proxy for PVR │ [ ] 155 HTPC Manager: Manage your HTPC from anywhere39 SABnzbd: NZB download manager │ [ ] 144 Sonarr: Automatically download TV shows2 Aria2: Download manager with web interface │ [ ] 139 SABnzbd: NZB download manager16 Medusa: Automatic video library manager for TV shows │ [ ] 132 Aria2: Download manager with web interface07 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)│ [ ] 116 Medusa: Automatic video library manager for TV shows6 Lidarr: Automatically download music │ [ ] 107 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)46 qBittorrent: BitTorrent server with web interface (C++) │ [ ] 106 Lidarr: Automatically download music5 Deluge: BitTorrent server with web interface (Python) │ [ ] 46 qBittorrent: BitTorrent server with web interface (C++)4 Transmission: BitTorrent server with web interface (C) │ [ ] 45 Deluge: BitTorrent server with web interface (Python) ●─ BitTorrent & Download ───────────────────────────────────────────│ [ ] 44 Transmission: BitTorrent server with web interface (C)212 Kavita: open source comics/mangas/ebooks media server with a built-i│ [ ]●─ BitTorrent & Download ───────────────────────────────────────────04 Navidrome: Web interface media streaming server │ [ ] 212 Kavita: open source comics/mangas/ebooks media server with a built-i192 Snapcast Client: Multiroom audio client │ [ ] 204 Navidrome: Web interface media streaming server1 Serverserver │ [ ] 192 Snapcast Client: Multiroom audio client0 Beets: music organizer and manager │ [ ] 191 Snapcast Server: Multiroom audio server79 Komga: free and open source comics/mangas media server with web UI │ [ ] 190 Beets: music organizer and manager8 Jellyfin: FOSS web interface media streaming server79 Komga: free and open source comics/mangas media server with web UI0 Beets: music organizer and manager ▮ │ [ ] 191 Snapcast Server: Multiroom audio server▒67 Raspotify: Spotify connect client │ [ ] 178 Jellyfin: FOSS web interface media streaming server0 Beets: music organizer and manager │ [ ] 191 Snapcast Server: Multiroom audio server3 GMediaRender: Resource efficient UPnP/DLNA renderer │ [ ] 167 Raspotify: Spotify connect client48 myMPD: fork of ympd with improved features │ [ ] 163 GMediaRender: Resource efficient UPnP/DLNA renderer6 Tautulli: monitoring and tracking tool for Plex │ [ ] 148 myMPD: fork of ympd with improved features3 Koel: web interface audio streamer │ [ ] 146 Tautulli: monitoring and tracking tool for Plex35 IceCast: Shoutcast streaming server (+DarkIce) │ [ ] 143 Koel: web interface audio streamer29 O!MPD: Feature-rich, web interface audio player for MPD │ [ ] 135 IceCast: Shoutcast streaming server (+DarkIce)8 MPD: music player daemon │ [ ] 129 O!MPD: Feature-rich, web interface audio player for MPD4 NAA daemon: signalyst network audio adaptor (naa) │ [ ] 128 MPD: music player daemon1 Roon Bridge: Turns device into Roon capable audio player │ [ ] 124 NAA daemon: signalyst network audio adaptor (naa)19 CAVA: Console audio visualisation for MPD │ [ ] 121 Roon Bridge: Turns device into Roon capable audio player8 Mopidy: Web interface music & radio player │ [ ] 119 CAVA: Console audio visualisation for MPD86 Roon Extension Manager: manage extensions from within Roon │ [ ] 118 Mopidy: Web interface music & radio player0 Ubooquity: free home server for your comics and ebooks library │ [ ] 86 Roon Extension Manager: manage extensions from within Roon43 Murmur: mumble voip server │ [ ] 80 Ubooquity: free home server for your comics and ebooks library2 Plex Media Server: web interface media streaming server │ [ ] 43 Murmur: mumble voip server1 Emby: web interface media streaming server │ [ ] 42 Plex Media Server: web interface media streaming server0 Ampache: web interface media streaming server1 Emby: web interface media streaming server ▮ │ [ ] 42 Plex Media Server: web interface media streaming server▒39 ReadyMedia: (MiniDLNA) (dlna, upnp)0 Ampache: web interface media streaming server1 Emby: web interface media streaming server │ [ ] 42 Plex Media Server: web interface media streaming server7 Shairport Sync: AirPlay audio player with multiroom sync │ [ ] 39 ReadyMedia: (MiniDLNA) media streaming server (dlna, upnp)6 Squeezelite: audio player for LMS & Squeezebox │ [ ] 37 Shairport Sync: AirPlay audio player with multiroom sync3 Airsonic-Advanced: Web interface media streaming server │ [ ] 36 Squeezelite: audio player for LMS & Squeezebox2 ympd: lightweight web interface music player for mpd │ [ ] 33 Airsonic-Advanced: Web interface media streaming server1 Kodi: The media centre for Linux │ [ ] 32 ympd: lightweight web interface music player for mpd ●─ Media Systems ───────────────────────────────────────────────────│ [ ] 31 Kodi: The media centre for Linux30 NoMachine: multi-platform server and client access │ [ ]●─ Media Systems ───────────────────────────────────────────────────29 XRDP: remote desktop protocol (rdp) server │ [ ] 30 NoMachine: multi-platform server and client access8 TigerVNC Server: desktop for remote connection │ [ ] 29 XRDP: remote desktop protocol (rdp) server ●─ Remote Desktop ──────────────────────────────────────────────────│ [ ] 28 TigerVNC Server: desktop for remote connection173 LXQt: lightweight desktop │ [ ]●─ Remote Desktop ──────────────────────────────────────────────────26 GNUstep: lightweight desktop based on OpenStep │ [ ] 173 LXQt: lightweight desktop5 Xfce: lightweight desktop │ [ ] 26 GNUstep: lightweight desktop based on OpenStep4 MATE: desktop enviroment │ [ ] 25 Xfce: lightweight desktop3 LXDE: ultra lightweight desktop │ [ ] 24 MATE: desktop enviroment ●─ Desktops ────────────────────────────────────────────────────────│ [ ] 23 LXDE: ultra lightweight desktop  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B  (B│ [ ] 33 Airsonic-Advanced: Web interface media streaming server6 Squeezelite: audio player for LMS & Squeezebox│ [ ] 36 Squeezelite: audio player for LMS & Squeezebox7 Shairport Sync: AirPlay audio player with multiroom sync│ [ ] 37 Shairport Sync: AirPlay audio player with multiroom sync9 ReadyMedia: (MiniDLNA) media streaming server (dlna, upnp)│ [ ] 39 ReadyMedia: (MiniDLNA) media streaming server (dlna, upnp)40 Ampache: web interface │ [ ] 40 Ampache: web interface media streaming server1 Emby: web interface media streaming server│ [ ] 41 Emby: web interface media streaming server2 Plex Media Server: web interface media streaming server│ [ ] 42 Plex Media Server: web interface media streaming server3 Murmur: mumble voip server│ [ ] 43 Murmur: mumble voip server80 Ubooquity: free home server for your comics and ebooks library│ [ ] 80 Ubooquity: free home server for your comics and ebooks library6 Roon Extension Manager: manage extensions from within Roon│ [ ] 86 Roon Extension Manager: manage extensions from within Roon118 Mopidy: Web interface music & radio player│ [ ] 118 Mopidy: Web interface music & radio player9 CAVA: Console audio visualisation for MPD│ [ ] 119 CAVA: Console audio visualisation for MPD21 Roon Bridge: Turns device into Roon capable audio player│ [ ] 121 Roon Bridge: Turns device into Roon capable audio player4 NAA daemon: signalyst network audio adaptor (naa)│ [ ] 124 NAA daemon: signalyst network audio adaptor (naa)8 MPD: music player daemon│ [ ] 128 MPD: music player daemon9 O!MPD: Feature-rich, web interface audio player for MPD│ [ ] 129 O!MPD: Feature-rich, web interface audio player for MPD35 IceCast: Shoutcast streaming server (+DarkIce)│ [ ] 135 IceCast: Shoutcast streaming server (+DarkIce)43 Koel: web interface audio streamer│ [ ] 42 Plex Media Server: web interface media streaming server▒3 Murmur: mumble voip server ▮│ [ ] 143 Koel: web interface audio streamer6 Tautulli: monitoring and tracking tool for Plex2 Plex Media Server: web interface media streaming server3 Murmur: mumble voip server│ [ ] 146 Tautulli: monitoring and tracking tool for Plex8 myMPD: fork of ympd with improved features│ [ ] 148 myMPD: fork of ympd with improved features63 GMediaRender: Resource efficient UPnP/DLNA renderer│ [ ] 163 GMediaRender: Resource efficient UPnP/DLNA renderer7 Raspotify: Spotify connect client│ [ ] 167 Raspotify: Spotify connect client78 Jellyfin: FOSS web interface media streaming server│ [ ] 178 Jellyfin: FOSS web interface media streaming server9 Komga: free and open source comics/mangas media server with web UI│ [ ] 179 Komga: free and open source comics/mangas media server with web UI90 Beets: music organizer and manager│ [ ] 190 Beets: music organizer and manager1 Snapcast Server: Multiroom audio server│ [ ] 191 Snapcast Server: Multiroom audio server2 Clientclient│ [ ] 192 Snapcast Client: Multiroom audio client204 Navidrome: Web interface media streaming server│ [ ] 204 Navidrome: Web interface media streaming server12 Kavita: open source comics/mangas/ebooks media server with a built-i│ [ ] 212 Kavita: open source comics/mangas/ebooks media server with a built-i ●─ BitTorrent & Download ───────────────────────────────────────────│ [ ]●─ BitTorrent & Download ───────────────────────────────────────────44 Transmission: BitTorrent server with web interface (C)│ [ ] 44 Transmission: BitTorrent server with web interface (C)5 Deluge: BitTorrent server with web interface (Python)│ [ ] 45 Deluge: BitTorrent server with web interface (Python)6 qBittorrent: BitTorrent server with web interface (C++)│ [ ] 46 qBittorrent: BitTorrent server with web interface (C++)106 Lidarr: Automatically download music│ [ ] 106 Lidarr: Automatically download music7 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)│ [ ] 107 rTorrent: BitTorrent server (C++) with rutorrent web interface (PHP)16 Medusa: Automatic video library manager for TV shows│ [ ] 191 Snapcast Server: Multiroom audio server▒2 Clientclient▮│ [ ] 116 Medusa: Automatic video library manager for TV shows32 Aria2: Download manager with web interface│ [ ] 191 Snapcast Server: Multiroom audio server2 Clientclient│ [ ] 132 Aria2: Download manager with web interface9 SABnzbd: NZB download manager│ [ ] 139 SABnzbd: NZB download manager44 Sonarr: Automatically download TV shows│ [ ] 144 Sonarr: Automatically download TV shows5 Radmovies│ [ ] 145 Radarr: Automatically download movies7 Jackett: API support for your torrent trackers│ [ ] 147 Jackett: API support for your torrent trackers9 NZBGet: NZB download manager│ [ ] 149 NZBGet: NZB download manager51 Prowlarr: Indexer manager & proxy for PVR│ [ ] 151 Prowlarr: Indexer manager & proxy for PVR5 HTPC Manager: Manage your HTPC from anywhere│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere80 Bazarr: Automatically download subtitles│ [ ] 180 Bazarr: Automatically download subtitles95 youtube-dl: Download videos from YouTube and other sites (using yt-d│ [ ] 195 youtube-dl: Download videos from YouTube and other sites (using yt-d203 Readarr: Ebook and audiobook collection manager│ [ ] 203 Readarr: Ebook and audiobook collection manager ●─ Cloud & Backup ──────────────────────────────────────────────────│ [ ]●─ Cloud & Backup ──────────────────────────────────────────────────48 Pydio: Feature-rich backup and sync server│ [ ] 48 Pydio: Feature-rich backup and sync server9 Gogs: Personal Git server with web interface│ [ ] 49 Gogs: Personal Git server with web interface50 Syncthing: Backup and sync server with web interface│ [ ] 50 Syncthing: Backup and sync server with web interface111 UrBackup Server: Full system backup server│ [ ] 111 UrBackup Server: Full system backup server4 Nextcloud: File sync, sharing and collaboration platform│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere▒80 Bazarr: Automatically download subtitles ▮│ [ ] 114 Nextcloud: File sync, sharing and collaboration platform58 MinIO: S3 compatible distributed object server│ [ ] 155 HTPC Manager: Manage your HTPC from anywhere80 Bazarr: Automatically download subtitles│ [ ] 158 MinIO: S3 compatible distributed object server65 Gitea: Git with a cup of tea│ [ ] 165 Gitea: Git with a cup of tea8 Nextcloud Talk: Video calls with configured Coturn server│ [ ] 168 Nextcloud Talk: Video calls with configured Coturn server83 vaultwarden: Unofficial Bitwarden password manager written in│ [ ] 183 vaultwarden: Unofficial Bitwarden password manager server written in98 File Browser: web based file manager│ [ ] 198 File Browser: web based file manager202 Rclone: Utility to sync your files to cloud storages│ [ ] 202 Rclone: Utility to sync your files to cloud storages9 Restic: Fast, efficient and secure command-line backup program│ [ ] 209 Restic: Fast, efficient and secure command-line backup program ●─ Gaming & Emulation ──────────────────────────────────────────────│ [ ]●─ Gaming & Emulation ──────────────────────────────────────────────52 Cuberite: Minecraft server with web interface (C++)│ [ ] 52 Cuberite: Minecraft server with web interface (C++)3 MineOS: Minecraft servers with web interface (Java/Node.js)│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js)108 Amiberry: Optimised Amiga emulator for ARM-based SoCs│ [ ] 108 Amiberry: Optimised Amiga emulator for ARM-based SoCs64 Nukkit: A nuclear-powered server for Minecraft Pocket Edition│ [ ] 164 Nukkit: A nuclear-powered server for Minecraft Pocket Edition81 PaperMC: Highly optimised Minecraft server with plugins, written in│ [ ] 181 PaperMC: Highly optimised Minecraft server with plugins, written in97 Box64: x86_64 userspace emulation│ [ ] 197 Box64: x86_64 userspace emulation ●─ Social & Search ─────────────────────────────────────────────────│ [ ]●─ Social & Search ─────────────────────────────────────────────────16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro│ [ ] 16 microblog.pub: A self-hosted, single-user, ActivityPub powered micro38 FreshRSS: self-hosted RSS feed aggregator│ [ ] 38 FreshRSS: self-hosted RSS feed aggregator54 phpBB: bulletin board forum software│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js) ▒108 Amiberry: Optimised Amiga emulator for ARM-based SoCs ▮│ [ ] 54 phpBB: bulletin board forum software5 WordPress: website blog and publishing platform│ [ ] 53 MineOS: Minecraft servers with web interface (Java/Node.js)108 Amiberry: Optimised Amiga emulator for ARM-based SoCs│ [ ] 55 WordPress: website blog and publishing platform6 Single File PHP Gallery: Website to host and browse your images│ [ ] 56 Single File PHP Gallery: Website to host and browse your images7 Baïkal: lightweight caldav + carddav server│ [ ] 57 Baïkal: lightweight caldav + carddav server125 Synapse: Matrix homeserver implementation│ [ ] 125 Synapse: Matrix homeserver implementation210 MediaWiki: A collaboration and documentation platform│ [ ] 210 MediaWiki: A collaboration and documentation platform ●─ Camera & Surveillance ───────────────────────────────────────────│ [ ]●─ Camera & Surveillance ───────────────────────────────────────────136 motionEye: Web interface & surveillance for your camera│ [ ] 136 motionEye: Web interface & surveillance for your camera7 mjpg-streamer: Simple camera streaming tool with HTML plugin│ [ ] 137 mjpg-streamer: Simple camera streaming tool with HTML plugin ●─ System Stats & Management ───────────────────────────────────────│ [ ]●─ System Stats & Management ───────────────────────────────────────63 LinuxDash: web interface system stats│ [ ] 63 LinuxDash: web interface system stats4 phpSysInfo: web interface system stats│ [ ] 64 phpSysInfo: web interface system stats5 Netdata: real-time performance monitoring│ [ ] 65 Netdata: real-time performance monitoring99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me│ [ ] 99 Prometheus Node Exporter: Prometheus exporter for hardware and OS me115 Webmin: web interface system management│ [ ] 115 Webmin: web interface system management34 Docker Compose: Manage multi-container Docker applications│ [ ] 134 Docker Compose: Manage multi-container Docker applications42 MicroK8s: The simplest production-grade upstream K8s, light and focu│ [ ] 142 MicroK8s: The simplest production-grade upstream K8s, light and focu*(B] 162 Docker: Build, ship, and run distributed applications│ [*] 162 Docker: Build, ship, and run distributed applications (B] 185 Portainer: Simplifies container management in Docker (standalone hos│ [ ] 64 phpSysInfo: web interface system stats▒5 Netdata: real-time performance monitoring▮│ [ ] 185 Portainer: Simplifies container management in Docker (standalone hos93 K3s: The certified Kubernetes distribution built for IoT & Edge comp│ [ ] 64 phpSysInfo: web interface system stats5 Netdata: real-time performance monitoring│ [ ] 193 K3s: The certified Kubernetes distribution built for IoT & Edge comp200 DietPi-Dashboard: Official lightweight DietPi web interface (Rust)│ [ ] 200 DietPi-Dashboard: Official lightweight DietPi web interface (Rust)5 Homer: Simple HOMepage for your servER to keep your services on hand│ [ ] 205 Homer: Simple HOMepage for your servER to keep your services on hand ●─ Remote Access ───────────────────────────────────────────────────│ [ ]●─ Remote Access ───────────────────────────────────────────────────68 Remote.It: Provides secure connections to your networked devices│ [ ] 68 Remote.It: Provides secure connections to your networked devices138 VirtualHere: server: share USB devices over the network (B  (B  (B  (B *(B* (B   (B *(B  (B* (B *(B  (B* (B  (B  (B  (B  [?25h (B(B  )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││Help!: Links to online guides, docs and information││DietPi-Config: Feature-rich configuration tool for your device││●─ Select Software ─────────────────────────────●││Search Software : Find software to install via search box││Browse Software : Select software from the full list (B││SSH Server: [Dropbear]││Log System: [DietPi-RAMlog #1]││User Data Location : [SD/eMMC | /mnt/dietpi_userdata]││●─ Install or Remove Software ──────────────────●││Uninstall: Select installed software for removal││Install: Go >> Start installation for selected software│││││││││└──────────────────────────────────────────────────────────────────────────────┘Browse Software : Select software from the full list SSH Server : [Dropbear] [?25h(B(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│ Please select desired SSH server:││││ - None: Selecting this option will uninstall all SSH servers. This reduces ││ system resources and improves performance. Useful for users who do NOT││ require networked/remote terminal access.││││ - Dropbear (recommended): Lightweight SSH server, installed by default on ││ DietPi systems.││││ - OpenSSH: A feature-rich SSH server with SFTP/SCP support, at the cost of ││ increased resource usage.││││None: Not required / manual setup││Dropbear : Lightweight SSH server (recommended) (B││OpenSSH Server : Feature-rich SSH server with SFTP and SCP support│││││││││└──────────────────────────────────────────────────────────────────────────────┘Dropbear : Lightweight SSH server (recommended) OpenSSH Server : Feature-rich SSH server with SFTP and SCP support[?25h(B(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││ OpenSSH Server has been selected:││ - Your choice will be applied when 'Install Go >> Start installation' is││ selected.││││ The following software will be installed:││ - OpenSSH Server││││ The following software will be uninstalled:││ - Dropbear││││(B│││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B  )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││Help!: Links to online guides, docs and information││DietPi-Config: Feature-rich configuration tool for your device││●─ Select Software ─────────────────────────────●││Search Software : Find software to install via search box││Browse Software : Select software from the full list││SSH Server : [OpenSSH Server] (B││Log System: [DietPi-RAMlog #1]││User Data Location : [SD/eMMC | /mnt/dietpi_userdata]││●─ Install or Remove Software ──────────────────●││Uninstall: Select installed software for removal││Install: Go >> Start installation for selected software│││││││││└──────────────────────────────────────────────────────────────────────────────┘SSH Server : [OpenSSH Server] Log System : [DietPi-RAMlog #1] (BLog System : [DietPi-RAMlog #1] User Data Location : [SD/eMMC | /mnt/dietpi_userdata] (BUser Data Location : [SD/eMMC | /mnt/dietpi_userdata]  ●─ Install or Remove Software ──────────────────●(B ●─ Install or Remove Software ──────────────────●Uninstall : Select installed software for removal (BUninstall : Select installed software for removal Install : Go >> Start installation for selected software Uninstall : Select installed software for removal (BInstall : Go >> Start installation for selected software  ●─ Install or Remove Software ──────────────────●(BUninstall : Select installed software for removal User Data Location : [SD/eMMC | /mnt/dietpi_userdata] (B ●─ Install or Remove Software ──────────────────●[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│ Choose where to store your user data. User data includes software such as ││ ownCloud data store, BitTorrent downloads etc.││││ More information on user data in DietPi:││ - https://dietpi.com/docs/dietpi_tools/#quick-selections││││ - DietPi-Drive_Manager: Launch DietPi-Drive_Manager to setup external││ drives, and, move user data to different locations.││││List : Select from a list of available drives to move user data.(B││Custom : Manually enter a location to move user data.││Drive : Launch DietPi-Drive_Manager.│││││││││└──────────────────────────────────────────────────────────────────────────────┘List : Select from a list of available drives to move user data.Custom : Manually enter a location to move user data. (BCustom : Manually enter a location to move user data. Drive : Launch DietPi-Drive_Manager. Custom : Manually enter a location to move user data. (BDrive : Launch DietPi-Drive_Manager. List : Select from a list of available drives to move user data.(BCustom : Manually enter a location to move user data. [?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌───────────────────────────┤ DietPi-Drive_Manager ├───────────────────────────┐│ Please select a mount location to use:││││/ : /dev/mmcblk1p1 | size: 30GiB | available: 27GiB(B│││││││││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B  [ OK ] DietPi-Drive_Manager | Drive mount selected: /  )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 ┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││Help!: Links to online guides, docs and information││DietPi-Config: Feature-rich configuration tool for your device││●─ Select Software ─────────────────────────────●││Search Software : Find software to install via search box││Browse Software : Select software from the full list││SSH Server: [OpenSSH Server]││Log System: [DietPi-RAMlog #1]││User Data Location : [SD/eMMC | /mnt/dietpi_userdata] (B││●─ Install or Remove Software ──────────────────●││Uninstall: Select installed software for removal││Install: Go >> Start installation for selected software│││││││││└──────────────────────────────────────────────────────────────────────────────┘User Data Location : [SD/eMMC | /mnt/dietpi_userdata]  ●─ Install or Remove Software ──────────────────●(B ●─ Install or Remove Software ──────────────────●Uninstall : Select installed software for removal (BUninstall : Select installed software for removal Install : Go >> Start installation for selected software [?25h(B(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120 | Use up/down buttons to scroll│││ DietPi is now ready to apply your software choices: │ │ The following software will be installed: │ - Vim: vi enhanced text editor │ - OpenSSH Server: Feature-rich SSH server with SFTP and SCP support │ - Docker: Build, ship, and run distributed applications │ - DietPi-Dashboard: Official lightweight DietPi web interface (Rust) │ │ The following software will be uninstalled: │ - Dropbear: Lightweight SSH server │ │ NB: Software services will be temporarily controlled (stopped) by DietPi │ during this process. Please inform connected users, before continuing. SSH │ and VNC are not affected. │ │ Software details, usernames, passwords etc: │ - https://dietpi.com/docs/software/ │ │ │ (B││└──────────────────────────────────────────────────────────────────────────────┘┘─(B[?25h (B  [ OK ] DietPi-Software | DietPi-Userdata validation: /mnt/dietpi_userdata   DietPi-Software ───────────────────────────────────────────────────── Step: Checking for conflicts and missing inputs   DietPi-Software ───────────────────────────────────────────────────── Step: Checking for prerequisite software  [ INFO ] DietPi-Software | OpenSSH Client will be installed  [ ] DietPi-Software | Checking IPv4 network connectivity (1/2).  [ OK ] DietPi-Software | Checking IPv4 network connectivity  [ ] DietPi-Software | Checking IPv6 network connectivity (1/2).  [ OK ] DietPi-Software | Checking IPv6 network connectivity  [ ] DietPi-Software | Checking DNS resolver (1/2).  [ OK ] DietPi-Software | Checking DNS resolver  [ ] DietPi-Software | mkdir -p /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads /var/www /opt /usr/local/bin.  [ OK ] DietPi-Software | mkdir -p /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads /var/www /opt /usr/local/bin  [ ] DietPi-Software | chown dietpi:dietpi /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads.  [ OK ] DietPi-Software | chown dietpi:dietpi /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads  [ ] DietPi-Software | chmod 0775 /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads.  [ OK ] DietPi-Software | chmod 0775 /mnt/dietpi_userdata/Music /mnt/dietpi_userdata/Pictures /mnt/dietpi_userdata/Video /mnt/dietpi_userdata/downloads  [ SUB1 ] DietPi-Services > stop  [ ] DietPi-Services | stop : cron.  [ OK ] DietPi-Services | stop : cron   DietPi-Software ───────────────────────────────────────────────────── Step: Installing Vim: vi enhanced text editor  [ INFO ] DietPi-Software | APT install vim, please wait... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libgpm2 libsodium23 vim-common vim-runtime Suggested packages: gpm ctags vim-doc vim-scripts Recommended packages: xxd The following NEW packages will be installed: libgpm2 libsodium23 vim vim-common vim-runtime 0 upgraded, 5 newly installed, 0 to remove and 0 not upgraded. Need to get 8707 kB of archives. After this operation, 41.8 MB of additional disk space will be used. Get:1 https://deb.debian.org/debian bookworm/main arm64 vim-common all 2:9.0.1378-2 [124 kB] Get:2 https://deb.debian.org/debian bookworm/main arm64 libgpm2 arm64 1.20.7-10+b1 [14.4 kB] Get:3 https://deb.debian.org/debian bookworm/main arm64 libsodium23 arm64 1.0.18-1 [119 kB] Get:4 https://deb.debian.org/debian bookworm/main arm64 vim-runtime all 2:9.0.1378-2 [7025 kB] Get:5 https://deb.debian.org/debian bookworm/main arm64 vim arm64 2:9.0.1378-2 [1424 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 8707 kB in 1s (6874 kB/s) Selecting previously unselected package vim-common. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 16435 files and directories currently installed.) Preparing to unpack .../vim-common_2%3a9.0.1378-2_all.deb ... Unpacking vim-common (2:9.0.1378-2) ... Selecting previously unselected package libgpm2:arm64. Preparing to unpack .../libgpm2_1.20.7-10+b1_arm64.deb ... Unpacking libgpm2:arm64 (1.20.7-10+b1) ... Selecting previously unselected package libsodium23:arm64. Preparing to unpack .../libsodium23_1.0.18-1_arm64.deb ... Unpacking libsodium23:arm64 (1.0.18-1) ... Selecting previously unselected package vim-runtime. Preparing to unpack .../vim-runtime_2%3a9.0.1378-2_all.deb ... Adding 'diversion of /usr/share/vim/vim90/doc/help.txt to /usr/share/vim/vim90/doc/help.txt.vim-tiny by vim-runtime' Adding 'diversion of /usr/share/vim/vim90/doc/tags to /usr/share/vim/vim90/doc/tags.vim-tiny by vim-runtime' Unpacking vim-runtime (2:9.0.1378-2) ... Selecting previously unselected package vim. Preparing to unpack .../vim_2%3a9.0.1378-2_arm64.deb ... Unpacking vim (2:9.0.1378-2) ... Setting up libsodium23:arm64 (1.0.18-1) ... Setting up libgpm2:arm64 (1.20.7-10+b1) ... Setting up vim-common (2:9.0.1378-2) ... Setting up vim-runtime (2:9.0.1378-2) ... Setting up vim (2:9.0.1378-2) ... update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/ex (ex) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rview (rview) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/rvim (rvim) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vi (vi) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/view (view) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vim (vim) in auto mode update-alternatives: using /usr/bin/vim.basic to provide /usr/bin/vimdiff (vimdiff) in auto mode Processing triggers for libc-bin (2.36-9+deb12u3) ...  [ OK ] DietPi-Software | APT install vim   DietPi-Software ───────────────────────────────────────────────────── Step: Installing OpenSSH Client: Feature-rich SSH, SFTP and SCP client  [ INFO ] DietPi-Software | APT install openssh-client, please wait... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libcbor0.8 libedit2 libfido2-1 Suggested packages: keychain libpam-ssh monkeysphere ssh-askpass Recommended packages: xauth The following NEW packages will be installed: libcbor0.8 libedit2 libfido2-1 openssh-client 0 upgraded, 4 newly installed, 0 to remove and 0 not upgraded. Need to get 1120 kB of archives. After this operation, 7229 kB of additional disk space will be used. Get:1 https://deb.debian.org/debian bookworm/main arm64 libedit2 arm64 3.1-20221030-2 [88.1 kB] Get:2 https://deb.debian.org/debian bookworm/main arm64 libcbor0.8 arm64 0.8.0-2+b1 [26.0 kB] Get:3 https://deb.debian.org/debian bookworm/main arm64 libfido2-1 arm64 1.12.0-2+b1 [72.6 kB] Get:4 https://deb.debian.org/debian-security bookworm-security/main arm64 openssh-client arm64 1:9.2p1-2+deb12u2 [933 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 1120 kB in 0s (2401 kB/s) Selecting previously unselected package libedit2:arm64. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18584 files and directories currently installed.) Preparing to unpack .../libedit2_3.1-20221030-2_arm64.deb ... Unpacking libedit2:arm64 (3.1-20221030-2) ... Selecting previously unselected package libcbor0.8:arm64. Preparing to unpack .../libcbor0.8_0.8.0-2+b1_arm64.deb ... Unpacking libcbor0.8:arm64 (0.8.0-2+b1) ... Selecting previously unselected package libfido2-1:arm64. Preparing to unpack .../libfido2-1_1.12.0-2+b1_arm64.deb ... Unpacking libfido2-1:arm64 (1.12.0-2+b1) ... Selecting previously unselected package openssh-client. Preparing to unpack .../openssh-client_1%3a9.2p1-2+deb12u2_arm64.deb ... Unpacking openssh-client (1:9.2p1-2+deb12u2) ... Setting up libcbor0.8:arm64 (0.8.0-2+b1) ... Setting up libedit2:arm64 (3.1-20221030-2) ... Setting up libfido2-1:arm64 (1.12.0-2+b1) ... Setting up openssh-client (1:9.2p1-2+deb12u2) ... Processing triggers for libc-bin (2.36-9+deb12u3) ...  [ OK ] DietPi-Software | APT install openssh-client   DietPi-Software ───────────────────────────────────────────────────── Step: Installing OpenSSH Server: Feature-rich SSH server with SFTP and SCP support  [ ] DietPi-Software | systemctl stop dropbear.  [ OK ] DietPi-Software | systemctl stop dropbear  [ INFO ] DietPi-Software | APT install openssh-server, please wait... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: libnsl2 libwrap0 openssh-sftp-server runit-helper ucf Suggested packages: molly-guard monkeysphere ssh-askpass ufw Recommended packages: default-logind | logind | libpam-systemd ncurses-term xauth The following NEW packages will be installed: libnsl2 libwrap0 openssh-server openssh-sftp-server runit-helper ucf 0 upgraded, 6 newly installed, 0 to remove and 0 not upgraded. Need to get 627 kB of archives. After this operation, 2799 kB of additional disk space will be used. Get:1 https://deb.debian.org/debian-security bookworm-security/main arm64 openssh-sftp-server arm64 1:9.2p1-2+deb12u2 [60.7 kB] Get:2 https://deb.debian.org/debian bookworm/main arm64 ucf all 3.0043+nmu1 [55.2 kB] Get:3 https://deb.debian.org/debian bookworm/main arm64 runit-helper all 2.15.2 [6520 B] Get:4 https://deb.debian.org/debian bookworm/main arm64 libnsl2 arm64 1.3.0-2 [36.9 kB] Get:5 https://deb.debian.org/debian bookworm/main arm64 libwrap0 arm64 7.6.q-32 [54.7 kB] Get:6 https://deb.debian.org/debian-security bookworm-security/main arm64 openssh-server arm64 1:9.2p1-2+deb12u2 [413 kB] debconf: delaying package configuration, since apt-utils is not installed Fetched 627 kB in 1s (965 kB/s) Selecting previously unselected package openssh-sftp-server. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18655 files and directories currently installed.) Preparing to unpack .../0-openssh-sftp-server_1%3a9.2p1-2+deb12u2_arm64.deb ... Unpacking openssh-sftp-server (1:9.2p1-2+deb12u2) ... Selecting previously unselected package ucf. Preparing to unpack .../1-ucf_3.0043+nmu1_all.deb ... Moving old data out of the way Unpacking ucf (3.0043+nmu1) ... Selecting previously unselected package runit-helper. Preparing to unpack .../2-runit-helper_2.15.2_all.deb ... Unpacking runit-helper (2.15.2) ... Selecting previously unselected package libnsl2:arm64. Preparing to unpack .../3-libnsl2_1.3.0-2_arm64.deb ... Unpacking libnsl2:arm64 (1.3.0-2) ... Selecting previously unselected package libwrap0:arm64. Preparing to unpack .../4-libwrap0_7.6.q-32_arm64.deb ... Unpacking libwrap0:arm64 (7.6.q-32) ... Selecting previously unselected package openssh-server. Preparing to unpack .../5-openssh-server_1%3a9.2p1-2+deb12u2_arm64.deb ... Unpacking openssh-server (1:9.2p1-2+deb12u2) ... Setting up runit-helper (2.15.2) ... Setting up openssh-sftp-server (1:9.2p1-2+deb12u2) ... Setting up ucf (3.0043+nmu1) ... Setting up libnsl2:arm64 (1.3.0-2) ... Setting up libwrap0:arm64 (7.6.q-32) ... Setting up openssh-server (1:9.2p1-2+deb12u2) ... Creating config file /etc/ssh/sshd_config with new version Creating SSH2 RSA key; this may take some time ... 3072 SHA256:XQCMN7EPvlDxMyXj6nHBL0O++ky336tH8CZngqFAb+Y root@DietPi (RSA) Creating SSH2 ECDSA key; this may take some time ... 256 SHA256:vk6KFFHlzj0nNKgwQatNxr3DdT1PpBpDzqfu1SDJ5vI root@DietPi (ECDSA) Creating SSH2 ED25519 key; this may take some time ... 256 SHA256:iHLPM4k2FLO3AABLea7qj7b7j5yyrrUJUYEjdS7D3vs root@DietPi (ED25519) Created symlink /etc/systemd/system/sshd.service → /lib/systemd/system/ssh.service. Created symlink /etc/systemd/system/multi-user.target.wants/ssh.service → /lib/systemd/system/ssh.service. rescue-ssh.target is a disabled or a static unit, not starting it. ssh.socket is a disabled or a static unit, not starting it. Processing triggers for libc-bin (2.36-9+deb12u3) ...  [ OK ] DietPi-Software | APT install openssh-server  [ ] DietPi-Software | systemctl unmask ssh. ..  ..  ..  ..  .. . [ OK ] DietPi-Software | systemctl unmask ssh  [ ] DietPi-Software | systemctl start ssh.  [ OK ] DietPi-Software | systemctl start ssh  [ SUB1 ] DietPi-Set_software > disable_ssh_password_logins  [ OK ] DietPi-Set_software | Desired setting in /etc/default/dropbear was already set: DROPBEAR_EXTRA_ARGS=""  [ OK ] DietPi-Set_software | Added setting PasswordAuthentication yes to end of file /etc/ssh/sshd_config.d/dietpi.conf  [ OK ] DietPi-Set_software | Added setting PermitRootLogin yes to end of file /etc/ssh/sshd_config.d/dietpi.conf  [ ] DietPi-Set_software | systemctl restart ssh. ..  [ OK ] DietPi-Set_software | systemctl restart ssh  [ OK ] DietPi-Set_software | Desired setting in /boot/dietpi.txt was already set: SOFTWARE_DISABLE_SSH_PASSWORD_LOGINS=0  [ OK ] disable_ssh_password_logins 0 | Completed   DietPi-Software ───────────────────────────────────────────────────── Step: Installing DietPi-Dashboard: Official lightweight DietPi web interface (Rust) )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│ Please choose which version of DietPi-Dashboard should be installed.││││Stable : Use a release version of DietPi-Dashboard. (B││Nightly : Use an unstable version of DietPi-Dashboard.│││││││││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 192.168.100.120┌─────────────────────────────┤ DietPi-Software ├──────────────────────────────┐│││ Would you like to install only the backend, for viewing on another dashboard ││ page?││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h(B  [ ] DietPi-Software | cd /tmp/DietPi-Software.  [ OK ] DietPi-Software | cd /tmp/DietPi-Software  [ ] DietPi-Software | curl -sSfL https://github.com/ravenclaw900/DietPi-Dashboard/releases/download/v0.6.2/dietpi-dashboard-aarch64-backend -o dietpi-dashboard-aarch64-backend. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  ..  ..  ..  [ OK ] DietPi-Software | curl -sSfL https://github.com/ravenclaw900/DietPi-Dashboard/releases/download/v0.6.2/dietpi-dashboard-aarch64-backend -o dietpi-dashboard-aarch64-backend  [ ] DietPi-Software | mkdir -p /opt/dietpi-dashboard.  [ OK ] DietPi-Software | mkdir -p /opt/dietpi-dashboard  [ ] DietPi-Software | mv dietpi-dashboard-aarch64-backend /opt/dietpi-dashboard/dietpi-dashboard.  [ OK ] DietPi-Software | mv dietpi-dashboard-aarch64-backend /opt/dietpi-dashboard/dietpi-dashboard  [ ] DietPi-Software | chmod +x /opt/dietpi-dashboard/dietpi-dashboard.  [ OK ] DietPi-Software | chmod +x /opt/dietpi-dashboard/dietpi-dashboard  [ ] DietPi-Software | curl -sSfL https://raw.githubusercontent.com/ravenclaw900/DietPi-Dashboard/v0.6.2/config.toml -o /opt/dietpi-dashboard/config.toml. ..  ..  ..  ..  [ OK ] DietPi-Software | curl -sSfL https://raw.githubusercontent.com/ravenclaw900/DietPi-Dashboard/v0.6.2/config.toml -o /opt/dietpi-dashboard/config.toml  [ OK ] DietPi-Software | Comment in /opt/dietpi-dashboard/config.toml converted to setting: pass = true  [ OK ] DietPi-Software | Comment in /opt/dietpi-dashboard/config.toml converted to setting: hash = "d404559f602eab6fd602ac7680dacbfaadd13630335e951f097af3900e9de176b6db28512f2e000b9d04fba5133e8b1c6e8df59db3a8ab9d60be4b97cc9e81db"  [ OK ] DietPi-Software | Comment in /opt/dietpi-dashboard/config.toml converted to setting: secret = "d3dbf1406f2b83169c0ffd4fce2808c870252c8db31ec26d9b17a40ff12993d5"   DietPi-Software ───────────────────────────────────────────────────── Step: Installing Docker: Build, ship, and run distributed applications  [ ] DietPi-Software | Checking URL: https://download.docker.com/linux/debian/gpg (1/2). ..  ..  ..  ..  .. [ OK ] DietPi-Software | Checking URL: https://download.docker.com/linux/debian/gpg  [ ] DietPi-Software | eval curl -sSfL 'https://download.docker.com/linux/debian/gpg' | gpg --dearmor -o /etc/apt/trusted.gpg.d/dietpi-docker.gpg --yes. ..  [ OK ] DietPi-Software | eval curl -sSfL 'https://download.docker.com/linux/debian/gpg' | gpg --dearmor -o /etc/apt/trusted.gpg.d/dietpi-docker.gpg --yes  [ ] DietPi-Software | eval echo 'deb https://download.docker.com/linux/debian/ bookworm stable' > /etc/apt/sources.list.d/docker.list.  [ OK ] DietPi-Software | eval echo 'deb https://download.docker.com/linux/debian/ bookworm stable' > /etc/apt/sources.list.d/docker.list  [ INFO ] DietPi-Software | APT update, please wait... Get:1 https://download.docker.com/linux/debian bookworm InRelease [43.3 kB] Hit:2 https://deb.debian.org/debian bookworm InRelease Hit:3 https://deb.debian.org/debian bookworm-updates InRelease Hit:4 https://deb.debian.org/debian-security bookworm-security InRelease Hit:5 https://deb.debian.org/debian bookworm-backports InRelease Get:6 https://download.docker.com/linux/debian bookworm/stable arm64 Packages [13.3 kB] Fetched 56.6 kB in 2s (24.6 kB/s) Reading package lists...  [ OK ] DietPi-Software | APT update  [ ] DietPi-Software | systemctl mask --now docker. ..  ..  ..  ..  .. . [ OK ] DietPi-Software | systemctl mask --now docker  [ INFO ] DietPi-Software | APT install docker-ce, please wait... Reading package lists... Building dependency tree... Reading state information... The following additional packages will be installed: containerd.io docker-ce-cli iptables libip6tc2 libnetfilter-conntrack3 libnfnetlink0 libnftnl11 netbase Suggested packages: cgroupfs-mount | cgroup-lite firewalld Recommended packages: apparmor docker-ce-rootless-extras git libltdl7 pigz xz-utils docker-buildx-plugin docker-compose-plugin nftables The following NEW packages will be installed: containerd.io docker-ce docker-ce-cli iptables libip6tc2 libnetfilter-conntrack3 libnfnetlink0 libnftnl11 netbase 0 upgraded, 9 newly installed, 0 to remove and 0 not upgraded. Need to get 47.7 MB of archives. After this operation, 209 MB of additional disk space will be used. Get:1 https://download.docker.com/linux/debian bookworm/stable arm64 containerd.io arm64 1.6.26-1 [21.3 MB] Get:2 https://deb.debian.org/debian bookworm/main arm64 netbase all 6.4 [12.8 kB] Get:3 https://deb.debian.org/debian bookworm/main arm64 libip6tc2 arm64 1.8.9-2 [18.7 kB] Get:4 https://deb.debian.org/debian bookworm/main arm64 libnfnetlink0 arm64 1.0.2-2 [14.5 kB] Get:5 https://deb.debian.org/debian bookworm/main arm64 libnetfilter-conntrack3 arm64 1.0.9-3 [38.4 kB] Get:6 https://deb.debian.org/debian bookworm/main arm64 libnftnl11 arm64 1.2.4-2 [57.6 kB] Get:7 https://deb.debian.org/debian bookworm/main arm64 iptables arm64 1.8.9-2 [352 kB] Get:8 https://download.docker.com/linux/debian bookworm/stable arm64 docker-ce-cli arm64 5:24.0.7-1~debian.12~bookworm [12.0 MB] Get:9 https://download.docker.com/linux/debian bookworm/stable arm64 docker-ce arm64 5:24.0.7-1~debian.12~bookworm [13.9 MB] debconf: delaying package configuration, since apt-utils is not installed Fetched 47.7 MB in 5s (10.2 MB/s) Selecting previously unselected package netbase. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 18772 files and directories currently installed.) Preparing to unpack .../0-netbase_6.4_all.deb ... Unpacking netbase (6.4) ... Selecting previously unselected package containerd.io. Preparing to unpack .../1-containerd.io_1.6.26-1_arm64.deb ... Unpacking containerd.io (1.6.26-1) ... Selecting previously unselected package docker-ce-cli. Preparing to unpack .../2-docker-ce-cli_5%3a24.0.7-1~debian.12~bookworm_arm64.deb ... Unpacking docker-ce-cli (5:24.0.7-1~debian.12~bookworm) ... Selecting previously unselected package libip6tc2:arm64. Preparing to unpack .../3-libip6tc2_1.8.9-2_arm64.deb ... Unpacking libip6tc2:arm64 (1.8.9-2) ... Selecting previously unselected package libnfnetlink0:arm64. Preparing to unpack .../4-libnfnetlink0_1.0.2-2_arm64.deb ... Unpacking libnfnetlink0:arm64 (1.0.2-2) ... Selecting previously unselected package libnetfilter-conntrack3:arm64. Preparing to unpack .../5-libnetfilter-conntrack3_1.0.9-3_arm64.deb ... Unpacking libnetfilter-conntrack3:arm64 (1.0.9-3) ... Selecting previously unselected package libnftnl11:arm64. Preparing to unpack .../6-libnftnl11_1.2.4-2_arm64.deb ... Unpacking libnftnl11:arm64 (1.2.4-2) ... Selecting previously unselected package iptables. Preparing to unpack .../7-iptables_1.8.9-2_arm64.deb ... Unpacking iptables (1.8.9-2) ... Selecting previously unselected package docker-ce. Preparing to unpack .../8-docker-ce_5%3a24.0.7-1~debian.12~bookworm_arm64.deb ... Unpacking docker-ce (5:24.0.7-1~debian.12~bookworm) ... Setting up libip6tc2:arm64 (1.8.9-2) ... Setting up libnftnl11:arm64 (1.2.4-2) ... Setting up containerd.io (1.6.26-1) ... Created symlink /etc/systemd/system/multi-user.target.wants/containerd.service → /lib/systemd/system/containerd.service. Setting up docker-ce-cli (5:24.0.7-1~debian.12~bookworm) ... Setting up libnfnetlink0:arm64 (1.0.2-2) ... Setting up netbase (6.4) ... Setting up libnetfilter-conntrack3:arm64 (1.0.9-3) ... Setting up iptables (1.8.9-2) ... update-alternatives: using /usr/sbin/iptables-legacy to provide /usr/sbin/iptables (iptables) in auto mode update-alternatives: using /usr/sbin/ip6tables-legacy to provide /usr/sbin/ip6tables (ip6tables) in auto mode update-alternatives: using /usr/sbin/iptables-nft to provide /usr/sbin/iptables (iptables) in auto mode update-alternatives: using /usr/sbin/ip6tables-nft to provide /usr/sbin/ip6tables (ip6tables) in auto mode update-alternatives: using /usr/sbin/arptables-nft to provide /usr/sbin/arptables (arptables) in auto mode update-alternatives: using /usr/sbin/ebtables-nft to provide /usr/sbin/ebtables (ebtables) in auto mode Setting up docker-ce (5:24.0.7-1~debian.12~bookworm) ... Failed to preset unit, unit /etc/systemd/system/docker.service is masked. /usr/bin/deb-systemd-helper: error: systemctl preset failed on docker.service: No such file or directory Created symlink /etc/systemd/system/sockets.target.wants/docker.socket → /lib/systemd/system/docker.socket. docker.service is a disabled or a static unit, not starting it. Could not execute systemctl: at /usr/bin/deb-systemd-invoke line 145. Processing triggers for libc-bin (2.36-9+deb12u3) ...  [ OK ] DietPi-Software | APT install docker-ce  [ ] DietPi-Software | systemctl unmask docker. ..  ..  ..  ..  .. . [ OK ] DietPi-Software | systemctl unmask docker  [ ] DietPi-Software | systemctl start docker.socket.  [ OK ] DietPi-Software | systemctl start docker.socket  [ ] DietPi-Software | mkdir -p /lib/systemd/system/docker.service.d.  [ OK ] DietPi-Software | mkdir -p /lib/systemd/system/docker.service.d  [ ] DietPi-Software | eval echo -e '[Service]\nType=simple' > /lib/systemd/system/docker.service.d/dietpi-simple.conf.  [ OK ] DietPi-Software | eval echo -e '[Service]\nType=simple' > /lib/systemd/system/docker.service.d/dietpi-simple.conf  [ ] DietPi-Software | mkdir -p /mnt/dietpi_userdata/docker-data.  [ OK ] DietPi-Software | mkdir -p /mnt/dietpi_userdata/docker-data  [ ] DietPi-Software | mkdir -p /etc/docker.  [ OK ] DietPi-Software | mkdir -p /etc/docker  [ OK ] DietPi-Software | Comment in /etc/containerd/config.toml converted to setting: [debug]  [ OK ] DietPi-Software | Comment in /etc/containerd/config.toml converted to setting:  level = "warn"  [ OK ] DietPi-Software | Setting in /boot/dietpiEnv.txt adjusted: docker_optimizations=on  [ ] DietPi-Software | update-alternatives --set iptables /usr/sbin/iptables-nft.  [ OK ] DietPi-Software | update-alternatives --set iptables /usr/sbin/iptables-nft  [ ] DietPi-Software | update-alternatives --set ip6tables /usr/sbin/ip6tables-nft.  [ OK ] DietPi-Software | update-alternatives --set ip6tables /usr/sbin/ip6tables-nft   DietPi-Software ───────────────────────────────────────────────────── Step: Uninstalling Dropbear: Lightweight SSH server  [ INFO ] DietPi-Software | APT purge dropbear*, please wait... Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: dropbear* dropbear-bin* libtomcrypt1* libtommath1* 0 upgraded, 0 newly installed, 4 to remove and 0 not upgraded. After this operation, 1969 kB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19227 files and directories currently installed.) Removing dropbear (2022.83-1) ... Removing dropbear-bin (2022.83-1) ... Removing libtomcrypt1:arm64 (1.18.2-6) ... Removing libtommath1:arm64 (1.2.0-6) ... Processing triggers for libc-bin (2.36-9+deb12u3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19189 files and directories currently installed.) Purging configuration files for dropbear (2022.83-1) ...  [ OK ] DietPi-Software | APT purge dropbear*   DietPi-Software ───────────────────────────────────────────────────── Step: Finalising uninstall  [ INFO ] DietPi-Software | APT autopurge, please wait... Reading package lists... Building dependency tree... Reading state information... 0 upgraded, 0 newly installed, 0 to remove and 0 not upgraded.  [ OK ] DietPi-Software | APT autopurge  [ ] DietPi-Software | systemctl daemon-reload. ..  ..  ..  ..  .. . [ OK ] DietPi-Software | systemctl daemon-reload   DietPi-Software ───────────────────────────────────────────────────── Step: Uninstall completed   DietPi-Software ───────────────────────────────────────────────────── Step: Finalising install  [ INFO ] DietPi-Software | Enabling installed services  [ ] DietPi-Software | systemctl --no-reload enable ssh. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  [ OK ] DietPi-Software | systemctl --no-reload enable ssh  [ ] DietPi-Software | systemctl --no-reload enable docker. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  [ OK ] DietPi-Software | systemctl --no-reload enable docker  [ ] DietPi-Software | systemctl --no-reload enable dietpi-dashboard.  [ OK ] DietPi-Software | systemctl --no-reload enable dietpi-dashboard  [ ] DietPi-Software | systemctl daemon-reload. ..  ..  ..  ..  .. . [ OK ] DietPi-Software | systemctl daemon-reload 2023-12-31 08:06:36 [ INFO ] DietPi-RAMlog | Storing /var/log to /var/tmp/dietpi/logs/dietpi-ramlog_store... 2023-12-31 08:06:36 [ OK ] DietPi-RAMlog | Stored /var/log to /var/tmp/dietpi/logs/dietpi-ramlog_store.   DietPi-Software ───────────────────────────────────────────────────── Step: Applying final first run setup steps  [ ] DietPi-AutoStart | systemctl daemon-reload. ..  ..  ..  ..  .. . [ OK ] DietPi-AutoStart | systemctl daemon-reload  [ ] DietPi-Software | systemctl enable cron. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  ..  ..  ..  .. . .. [ OK ] DietPi-Software | systemctl enable cron  [ ] DietPi-Software | eval echo 2 > /boot/dietpi/.install_stage.  [ OK ] DietPi-Software | eval echo 2 > /boot/dietpi/.install_stage  [ ] DietPi-Software | rm /boot/dietpi/.skip_distro_upgrade.  [ OK ] DietPi-Software | rm /boot/dietpi/.skip_distro_upgrade  [ OK ] DietPi-Software | Applied final first run setup steps   DietPi-Software ───────────────────────────────────────────────────── Step: Install completed  [ ] DietPi-Survey | Sending survey data. ..  ..  ..  ..  .. . .. ..  ..  .. .. . ..  ..  ..  ..  .. . [ OK ] DietPi-Survey | Sending survey data  [ SUB1 ] DietPi-Services > restart  [ ] DietPi-Services | restart : docker.  [ OK ] DietPi-Services | restart : docker  [ ] DietPi-Services | restart : cron.  [ OK ] DietPi-Services | restart : cron  [ INFO ] DietPi-Software | Starting installed services not controlled by DietPi-Services  [ ] DietPi-Software | systemctl start dietpi-dashboard.  [ OK ] DietPi-Software | systemctl start dietpi-dashboard   ───────────────────────────────────────────────────── DietPi v8.25.1 : 08:06 - Sun 12/31/23 ───────────────────────────────────────────────────── - Device model : Orange Pi Zero 3 (aarch64) - CPU temp : 47 °C / 116 °F : Optimal temperature - LAN IP : 192.168.100.120 (eth0) - MOTD : The DietPi team wishes you all a 🎉🎉 Happy New Year 2024 🎉🎉  ───────────────────────────────────────────────────── DietPi Team : https://github.com/MichaIng/DietPi#the-dietpi-project-team Patreon Legends : Chris Gelatt, ADSB.im Website : https://dietpi.com/ | https://twitter.com/DietPi_ Contribute : https://dietpi.com/contribute.html Web Hosting by : https://myvirtualserver.com dietpi-launcher : All the DietPi programs in one place dietpi-config : Feature rich configuration tool for your device dietpi-software : Select optimised software for installation htop : Resource monitor cpu : Shows CPU information and stats [?2004hroot@DietPi:~# reboot [?2004l [ 844.163697] systemd-shutdown[1]: Failed to set timeout to 10min: Invalid argument [ 844.522152] reboot: Restarting system U-Boot SPL 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):84de50c7 NOTICE: BL31: Built : 11:01:01, Sep 25 2023 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082628, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: -65539 INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. U-Boot 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero3 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. starting USB... No working controllers found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3337 bytes read in 3 ms (1.1 MiB/s) ## Executing script at 4fc00000 305 bytes read in 3 ms (98.6 KiB/s) 9419107 bytes read in 785 ms (11.4 MiB/s) 10113397 bytes read in 842 ms (11.5 MiB/s) 39931 bytes read in 10 ms (3.8 MiB/s) Ethernet adapter: "" Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41800000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10113333 Bytes = 9.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4965a000, end 49fff135 ... OK Loading Device Tree to 000000004964d000, end 0000000049659bfa ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.31-sun50iw9 (root@liuyang-WUJIE-14) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 [ 0.000000] Machine model: OrangePi Zero3 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fdc4040-0x7fdc5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 19 pages/cpu s37992 r8192 d31640 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=c270c9eb-32ee-468a-8581-2fa6ec670353 rootfstype=ext4 rootwait console=ttyS0,115200 console=tty1 consoleblank=0 coherent_pool=2M usb-storage.quirks= net.ifnames=0 ethernet_phy= cgroup_enable=memory swapaccount=1 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. [ 0.000000] Unknown kernel command line parameters "ethernet_phy= cgroup_enable=memory", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 393216 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 128568(98%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 861728K/1048576K available (13888K kernel code, 1462K rwdata, 3760K rodata, 2752K init, 499K bss, 55776K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000539] Console: colour dummy device 80x25 [ 0.000923] printk: console [tty1] enabled [ 0.001012] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001036] pid_max: default: 32768 minimum: 301 [ 0.001116] LSM: Security Framework initializing [ 0.001155] Yama: becoming mindful. [ 0.001255] AppArmor: AppArmor initialized [ 0.001344] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001367] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002386] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002954] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002975] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003140] rcu: Hierarchical SRCU implementation. [ 0.003152] rcu: Max phase no-delay instances is 1000. [ 0.004279] smp: Bringing up secondary CPUs ... [ 0.004755] Detected VIPT I-cache on CPU1 [ 0.004827] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.004860] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005361] Detected VIPT I-cache on CPU2 [ 0.005411] cacheinfo: Unable to detect cache hierarchy for CPU 2 [ 0.005430] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005876] Detected VIPT I-cache on CPU3 [ 0.005931] cacheinfo: Unable to detect cache hierarchy for CPU 3 [ 0.005949] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006008] smp: Brought up 1 node, 4 CPUs [ 0.006079] SMP: Total of 4 processors activated. [ 0.006091] CPU features: detected: 32-bit EL0 Support [ 0.006102] CPU features: detected: CRC32 instructions [ 0.006171] CPU: All CPU(s) started at EL2 [ 0.006182] alternatives: applying system-wide alternatives [ 0.007949] devtmpfs: initialized [ 0.013882] Registered cp15_barrier emulation handler [ 0.013905] Registered setend emulation handler [ 0.014059] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014089] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.019046] pinctrl core: initialized pinctrl subsystem [ 0.020367] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.021672] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.022158] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.022522] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.022589] audit: initializing netlink subsys (disabled) [ 0.022719] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.023069] thermal_sys: Registered thermal governor 'fair_share' [ 0.023075] thermal_sys: Registered thermal governor 'bang_bang' [ 0.023087] thermal_sys: Registered thermal governor 'step_wise' [ 0.023098] thermal_sys: Registered thermal governor 'user_space' [ 0.023152] cpuidle: using governor menu [ 0.023385] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.023473] ASID allocator initialised with 65536 entries [ 0.023632] Serial: AMBA PL011 UART driver [ 0.028540] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.032561] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.033010] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.033040] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.033734] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.034998] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector [ 0.036587] KASLR disabled due to lack of seed [ 0.042720] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.042735] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.042749] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.042760] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.042773] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.042784] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.042797] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042808] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.043503] cryptd: max_cpu_qlen set to 1000 [ 0.108186] raid6: neonx8 gen() 1850 MB/s [ 0.176252] raid6: neonx4 gen() 1893 MB/s [ 0.244318] raid6: neonx2 gen() 1792 MB/s [ 0.312379] raid6: neonx1 gen() 1558 MB/s [ 0.380443] raid6: int64x8 gen() 1282 MB/s [ 0.448502] raid6: int64x4 gen() 1427 MB/s [ 0.516562] raid6: int64x2 gen() 1219 MB/s [ 0.584618] raid6: int64x1 gen() 905 MB/s [ 0.584630] raid6: using algorithm neonx4 gen() 1893 MB/s [ 0.652681] raid6: .... xor() 1362 MB/s, rmw enabled [ 0.652694] raid6: using neon recovery algorithm [ 0.653960] iommu: Default domain type: Translated [ 0.653974] iommu: DMA domain TLB invalidation policy: strict mode [ 0.654226] SCSI subsystem initialized [ 0.654413] usbcore: registered new interface driver usbfs [ 0.654460] usbcore: registered new interface driver hub [ 0.654495] usbcore: registered new device driver usb [ 0.654783] pps_core: LinuxPPS API ver. 1 registered [ 0.654796] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.654820] PTP clock support registered [ 0.655105] ARM FF-A: FFA_VERSION returned not supported [ 0.655402] Advanced Linux Sound Architecture Driver Initialized. [ 0.656026] NetLabel: Initializing [ 0.656037] NetLabel: domain hash size = 128 [ 0.656047] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.656119] NetLabel: unlabeled traffic allowed by default [ 0.656131] mctp: management component transport protocol core [ 0.656142] NET: Registered PF_MCTP protocol family [ 0.656557] clocksource: Switched to clocksource arch_sys_counter [ 0.656768] VFS: Disk quotas dquot_6.6.0 [ 0.656817] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657321] AppArmor: AppArmor Filesystem Enabled [ 0.663625] NET: Registered PF_INET protocol family [ 0.663775] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.664895] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.664928] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.664952] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.665033] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.665339] TCP: Hash tables configured (established 8192 bind 8192) [ 0.665441] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665480] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665637] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.666137] Trying to unpack rootfs image as initramfs... [ 0.676840] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.678582] Initialise system trusted keyrings [ 0.678663] Key type blacklist registered [ 0.678983] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 0.684386] zbud: loaded [ 0.686079] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.688343] integrity: Platform Keyring initialized [ 0.730385] xor: measuring software checksum speed [ 0.735161] 8regs : 2100 MB/sec [ 0.739763] 32regs : 2169 MB/sec [ 0.744677] arm64_neon : 2037 MB/sec [ 0.744716] xor: using function: 32regs (2169 MB/sec) [ 0.744737] async_tx: api initialized (async) [ 0.744756] Key type asymmetric registered [ 0.744768] Asymmetric key parser 'x509' registered [ 1.172304] Freeing initrd memory: 9876K [ 1.194065] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.194207] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.194340] io scheduler mq-deadline registered [ 1.194355] io scheduler kyber registered [ 1.194551] io scheduler bfq registered [ 1.207014] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.209204] misc dump reg init [ 1.212184] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.215902] loop: module loaded [ 1.218734] usbcore: registered new interface driver usb-storage [ 1.219151] mousedev: PS/2 mouse device common for all mice [ 1.220190] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.220222] sun6i-rtc 7000000.rtc: setting system clock to 2023-12-31T08:07:09 UTC (1704010029) [ 1.220325] sun6i-rtc 7000000.rtc: RTC enabled [ 1.220534] i2c_dev: i2c /dev entries driver [ 1.220778] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 1.221277] axp20x-i2c 0-0036: AXP20x variant AXP313a found [ 1.221480] axp20x-regulator axp20x-regulator: DCDC frequency on AXP313a is fixed to 3 MHz. [ 1.221499] axp20x-regulator axp20x-regulator: Error setting dcdc frequency: -22 [ 1.231620] axp20x-i2c 0-0036: AXP20X driver loaded [ 1.232298] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.233618] sdhci: Secure Digital Host Controller Interface driver [ 1.233632] sdhci: Copyright(c) Pierre Ossman [ 1.233662] Synopsys Designware Multimedia Card Interface Driver [ 1.234300] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.234687] ledtrig-cpu: registered to indicate activity on CPUs [ 1.234963] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 1.235393] hid: raw HID events driver (C) Jiri Kosina [ 1.235477] usbcore: registered new interface driver usbhid [ 1.235490] usbhid: USB HID core driver [ 1.281752] NET: Registered PF_INET6 protocol family [ 1.302960] Segment Routing with IPv6 [ 1.303067] In-situ OAM (IOAM) with IPv6 [ 1.303174] NET: Registered PF_PACKET protocol family [ 1.303299] 8021q: 802.1Q VLAN Support v1.8 [ 1.303442] 9pnet: Installing 9P2000 support [ 1.303523] Key type dns_resolver registered [ 1.304063] registered taskstats version 1 [ 1.304097] Loading compiled-in X.509 certificates [ 1.307490] Loaded X.509 cert 'Build time autogenerated kernel key: 670a8c44863ab36e3a91b0b7e24e53744b2354d7' [ 1.309652] zswap: loaded using pool zstd/z3fold [ 1.309984] Key type .fscrypt registered [ 1.309998] Key type fscrypt-provisioning registered [ 1.310978] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.311207] Key type encrypted registered [ 1.311228] AppArmor: AppArmor sha1 policy hashing enabled [ 1.311259] ima: No TPM chip found, activating TPM-bypass! [ 1.311288] ima: Allocated hash algorithm: sha1 [ 1.311324] ima: No architecture policies found [ 1.311376] evm: Initialising EVM extended attributes: [ 1.311387] evm: security.selinux [ 1.311396] evm: security.SMACK64 [ 1.311405] evm: security.SMACK64EXEC [ 1.311415] evm: security.SMACK64TRANSMUTE [ 1.311424] evm: security.SMACK64MMAP [ 1.311433] evm: security.apparmor [ 1.311442] evm: security.ima [ 1.311451] evm: security.capability [ 1.311460] evm: HMAC attrs: 0x1 [ 1.334043] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.334623] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.334881] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 1.335352] printk: console [ttyS0] disabled [ 1.335434] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 285, base_baud = 1500000) is a 16550A [ 2.728428] printk: console [ttyS0] enabled [ 2.733424] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.741201] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.764852] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e85e48) [ 2.772596] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e8a620) [ 2.780700] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e82e20) [ 2.789125] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.797105] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.807153] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.815027] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e84f08) [ 2.822879] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.830688] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.837988] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator [ 2.847123] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.848240] spi-nor spi0.0: ZB25VQ128A (16384 Kbytes) [ 2.874344] sun50i-cpufreq-nvmem: will use speed0 CPU OPPs [ 2.884100] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1032000 KHz, changing to: 1200000 KHz [ 2.895059] OF: /thermal-zones/gpu-thermal/cooling-maps/map0: could not get #cooling-cells for /soc/gpu@1800000 [ 2.905164] thermal_sys: Add a cooling_device property with at least one device [ 2.912474] thermal thermal_zone0: binding zone gpu-thermal with cdev cpufreq-cpu0 failed:-2 [ 2.921277] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator [ 2.930671] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.931484] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.932782] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 2.932868] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 2.933695] ehci-platform 5200000.usb: EHCI Host Controller [ 2.933711] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1 [ 2.933782] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 2.934152] ehci-platform 5310000.usb: EHCI Host Controller [ 2.934163] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 2 [ 2.934199] ehci-platform 5311000.usb: EHCI Host Controller [ 2.934210] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3 [ 2.934235] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 2.934266] ehci-platform 5311000.usb: irq 294, io mem 0x05311000 [ 2.934640] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 2.934651] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 4 [ 2.934674] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 2.934685] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 5 [ 2.934701] ohci-platform 5200400.usb: irq 295, io mem 0x05200400 [ 2.934747] ohci-platform 5310400.usb: irq 296, io mem 0x05310400 [ 2.935051] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.935062] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.935111] ohci-platform 5311400.usb: irq 297, io mem 0x05311400 [ 2.940426] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.948578] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.964567] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 2.968403] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.969364] ALSA device list: [ 2.969367] #0: audiocodec [ 2.969371] #1: ahubdam [ 2.969374] #2: ahubhdmi [ 2.979075] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.981969] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.984561] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.987556] usb usb1: Product: EHCI Host Controller [ 3.035531] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.041771] usb usb1: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.043649] mmc1: new high speed SDHC card at address 0001 [ 3.049519] usb usb1: SerialNumber: 5200000.usb [ 3.050149] mmcblk1: mmc1:0001 SD16G 29.5 GiB [ 3.056039] hub 1-0:1.0: USB hub found [ 3.063409] mmcblk1: p1 [ 3.068363] hub 1-0:1.0: 1 port detected [ 3.177104] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.178247] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.196918] mmc0: new high speed SDIO card at address 8800 [ 3.201370] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.214080] usb usb3: Product: EHCI Host Controller [ 3.214085] usb usb3: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.214090] usb usb3: SerialNumber: 5311000.usb [ 3.229926] hub 3-0:1.0: USB hub found [ 3.233702] hub 3-0:1.0: 1 port detected [ 3.237943] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.246216] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.253444] usb usb5: Product: Generic Platform OHCI controller [ 3.259368] usb usb5: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.265552] usb usb5: SerialNumber: 5310400.usb [ 3.270315] hub 5-0:1.0: USB hub found [ 3.274098] hub 5-0:1.0: 1 port detected [ 3.278484] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.286771] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.294005] usb usb6: Product: Generic Platform OHCI controller [ 3.299933] usb usb6: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.306121] usb usb6: SerialNumber: 5311400.usb [ 3.311004] hub 6-0:1.0: USB hub found [ 3.314805] hub 6-0:1.0: 1 port detected [ 3.319336] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.327617] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.334852] usb usb4: Product: Generic Platform OHCI controller [ 3.340781] usb usb4: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.346972] usb usb4: SerialNumber: 5200400.usb [ 3.351850] hub 4-0:1.0: USB hub found [ 3.355727] hub 4-0:1.0: 1 port detected [ 3.359976] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.368253] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.375481] usb usb2: Product: EHCI Host Controller [ 3.380364] usb usb2: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.386546] usb usb2: SerialNumber: 5310000.usb [ 3.391330] hub 2-0:1.0: USB hub found [ 3.395110] hub 2-0:1.0: 1 port detected [ 3.400100] Freeing unused kernel memory: 2752K [ 3.416655] Run /init as init process [ 3.775564] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pi not found, using dummy regulator [ 3.784746] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.791163] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.797193] dwmac-sun8i 5020000.ethernet: No regulator found [ 3.802984] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.808834] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 3.818390] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.825706] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.832987] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.837997] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.844819] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.850523] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.971149] dwmac-sun8i 5020000.ethernet: EMAC reset timeout [ 3.976896] dwmac-sun8i 5020000.ethernet eth0: stmmac_dvr_remove: removing driver [ 4.001755] dwmac-sun8i: probe of 5020000.ethernet failed with error -110 [ 4.214512] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 5.130285] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.162994] systemd[1]: Detected architecture arm64. [ 5.178512] systemd[1]: Hostname set to . [ 5.839655] systemd[1]: Queued start job for default target graphical.target. [ 5.919396] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.929152] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.939022] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 5.948308] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 5.959616] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.970676] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.983420] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 5.991252] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 6.000337] systemd[1]: Reached target paths.target - Path Units. [ 6.006579] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 6.013932] systemd[1]: Reached target slices.target - Slice Units. [ 6.020414] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 6.029327] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 6.038310] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 6.047857] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 6.056600] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 6.065921] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 6.074746] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 6.083276] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 6.125371] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 6.140224] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 6.153230] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 6.161986] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.185997] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 6.199635] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 6.213546] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 6.227176] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 6.240755] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 6.253675] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 6.266584] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 6.278299] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 6.286693] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 6.309123] systemd[1]: Starting systemd-journald.service - Journal Service... [ 6.334767] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.337304] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 6.347417] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.367818] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 6.377458] fuse: init (API version 7.37) [ 6.383803] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 6.398530] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 6.407014] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.415657] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.421646] EXT4-fs (mmcblk1p1): re-mounted. Quota mode: none. [ 6.432621] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 6.442556] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.452733] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.460845] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.470837] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 6.478698] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 6.488036] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.496061] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.505468] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.597354] Adding 1092604k swap on /var/swap. Priority:-2 extents:4 across:1133564k SSFS Debian GNU/Linux 12 DietPi ttyS0 DietPi login: r dietpi Password: Linux DietPi 6.1.31-sun50iw9 #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law.   ───────────────────────────────────────────────────── DietPi v8.25.1 : 08:07 - Sun 12/31/23 ───────────────────────────────────────────────────── - Device model : Orange Pi Zero 3 (aarch64) - CPU temp : 45 °C / 113 °F : Optimal temperature - LAN IP : 172.17.0.1 (docker0) curl: (6) Could not resolve host: dietpi.com ───────────────────────────────────────────────────── DietPi Team : https://github.com/MichaIng/DietPi#the-dietpi-project-team Patreon Legends : Chris Gelatt, ADSB.im Website : https://dietpi.com/ | https://twitter.com/DietPi_ Contribute : https://dietpi.com/contribute.html Web Hosting by : https://myvirtualserver.com dietpi-launcher : All the DietPi programs in one place dietpi-config : Feature rich configuration tool for your device dietpi-software : Select optimised software for installation htop : Resource monitor cpu : Shows CPU information and stats [?2004hdietpi@DietPi:~$ ip addr [?2004l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:7a:07:88:99 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever [?2004hdietpi@DietPi:~$ ls ip addr [?2004l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:7a:07:88:99 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever [?2004hdietpi@DietPi:~$ ip addr [?2004l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:7a:07:88:99 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever [?2004hdietpi@DietPi:~$ clear [?2004l [?2004hdietpi@DietPi:~$ cat /etc/network network/ networks dietpi@DietPi:~$ cat /etc/networks  .k network/ networks dietpi@DietPi:~$ cat /etc/network network/ networks dietpi@DietPi:~$ cat /etc/network/interfaces [?2004l # Location: /etc/network/interfaces # Please modify network settings via: dietpi-config # Or create your own drop-ins in: /etc/network/interfaces.d/ # Drop-in configs source interfaces.d/* # Ethernet allow-hotplug eth0 iface eth0 inet dhcp address 192.168.0.100 netmask 255.255.255.0 gateway 192.168.0.1 #dns-nameservers 9.9.9.9 149.112.112.112 # WiFi #allow-hotplug wlan0 iface wlan0 inet dhcp address 192.168.0.100 netmask 255.255.255.0 gateway 192.168.0.1 #dns-nameservers 9.9.9.9 149.112.112.112 wireless-power off wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf [?2004hdietpi@DietPi:~$ doassudo vim /etc/network/interfaces [?2004l [?25l"/etc/network/interfaces" 24L, 571B▽ Pzz\[0%m # Location: /etc/network/interfaces # Please modify network settings via: dietpi-config# Or create your own drop-ins in: /etc/network/interfaces.d/# Drop-in configs source interfaces.d/* # Ethernet allow-hotplug eth0 iface eth0 inet dhcp address 192.168.0.100 netmask 255.255.255.0 gateway 192.168.0.1 #dns-nameservers 9.9.9.9 149.112.112.112 # WiFi #allow-hotplug wlan0 iface wlan0 inet dhcp address 192.168.0.100 netmask 255.255.255.0 gateway 192.168.0.1 #dns-nameservers 9.9.9.9 149.112.112.112 wireless-power off1,1Top[?25h[?25l~@k 2[?25h[?25l~@k 3[?25h[?25l~@k 4,0-1[?25h[?25l~@k 5,1 [?25h[?25l~@k 6[?25h[?25l~@k 7,0-1[?25h[?25l~@k 8,1 [?25h[?25l~@k 9[?25h[?25l~@k 10,1[?25h[?25l~@k 1[?25h[?25ld[?25h[?25ld  wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf11,1All[?25h[?25ld[?25h[?25ld  ~11,1All[?25h[?25ld[?25h[?25ld  ~11,1All[?25h[?25l~@k 2,0-1[?25h[?25l~@k 3,1 [?25h[?25l~@k 4[?25h[?25l~@k 5[?25h[?25l~@k 6[?25h[?25l~@k 7[?25h[?25l~@k 6[?25h[?25ld[?25h[?25ld  ~16,1All[?25h[?25ld[?25h[?25ld  ~16,1All[?25h[?25ld[?25h[?25ld  ~16,1All[?25h[?25l~@k 7[?25h[?25l~@k 8[?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k 7[?25h[?25l~@k 6[?25h[?25l~@k 5[?25h[?25l~@k 4[?25h[?25l~@k 3[?25h[?25l~@k 2,0-1[?25h[?25l^[ ^[ [?25h[?25l::[?25hwq [?25l"/etc/network/interfaces" 18L, 443B written [?25h [?2004hdietpi@DietPi:~$ dsudo reboot [?2004l Failed to connect to bus: No such file or directory [ 214.505280] systemd-shutdown[1]: Failed to set timeout to 10min: Invalid argument [ 214.799924] reboot: Restarting system U-Boot SPL 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):84de50c7 NOTICE: BL31: Built : 11:01:01, Sep 25 2023 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082628, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: -65539 INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. U-Boot 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero3 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. starting USB... No working controllers found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3337 bytes read in 3 ms (1.1 MiB/s) ## Executing script at 4fc00000 305 bytes read in 3 ms (98.6 KiB/s) 9419107 bytes read in 785 ms (11.4 MiB/s) 10113397 bytes read in 842 ms (11.5 MiB/s) 39931 bytes read in 10 ms (3.8 MiB/s) Ethernet adapter: "" Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41800000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10113333 Bytes = 9.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4965a000, end 49fff135 ... OK Loading Device Tree to 000000004964d000, end 0000000049659bfa ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.31-sun50iw9 (root@liuyang-WUJIE-14) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 [ 0.000000] Machine model: OrangePi Zero3 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fdc4040-0x7fdc5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 19 pages/cpu s37992 r8192 d31640 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=c270c9eb-32ee-468a-8581-2fa6ec670353 rootfstype=ext4 rootwait console=ttyS0,115200 console=tty1 consoleblank=0 coherent_pool=2M usb-storage.quirks= net.ifnames=0 ethernet_phy= cgroup_enable=memory swapaccount=1 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. [ 0.000000] Unknown kernel command line parameters "ethernet_phy= cgroup_enable=memory", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 393216 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 128568(98%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 861728K/1048576K available (13888K kernel code, 1462K rwdata, 3760K rodata, 2752K init, 499K bss, 55776K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000540] Console: colour dummy device 80x25 [ 0.000927] printk: console [tty1] enabled [ 0.001016] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001039] pid_max: default: 32768 minimum: 301 [ 0.001119] LSM: Security Framework initializing [ 0.001157] Yama: becoming mindful. [ 0.001259] AppArmor: AppArmor initialized [ 0.001345] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001368] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002384] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002950] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002970] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003135] rcu: Hierarchical SRCU implementation. [ 0.003148] rcu: Max phase no-delay instances is 1000. [ 0.004286] smp: Bringing up secondary CPUs ... [ 0.004762] Detected VIPT I-cache on CPU1 [ 0.004836] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.004869] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005371] Detected VIPT I-cache on CPU2 [ 0.005423] cacheinfo: Unable to detect cache hierarchy for CPU 2 [ 0.005441] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005887] Detected VIPT I-cache on CPU3 [ 0.005942] cacheinfo: Unable to detect cache hierarchy for CPU 3 [ 0.005960] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006019] smp: Brought up 1 node, 4 CPUs [ 0.006090] SMP: Total of 4 processors activated. [ 0.006101] CPU features: detected: 32-bit EL0 Support [ 0.006112] CPU features: detected: CRC32 instructions [ 0.006181] CPU: All CPU(s) started at EL2 [ 0.006192] alternatives: applying system-wide alternatives [ 0.007867] devtmpfs: initialized [ 0.013854] Registered cp15_barrier emulation handler [ 0.013877] Registered setend emulation handler [ 0.014032] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014061] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.019025] pinctrl core: initialized pinctrl subsystem [ 0.020363] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.021671] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.022157] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.022521] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.022586] audit: initializing netlink subsys (disabled) [ 0.022716] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.023065] thermal_sys: Registered thermal governor 'fair_share' [ 0.023072] thermal_sys: Registered thermal governor 'bang_bang' [ 0.023084] thermal_sys: Registered thermal governor 'step_wise' [ 0.023096] thermal_sys: Registered thermal governor 'user_space' [ 0.023150] cpuidle: using governor menu [ 0.023383] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.023471] ASID allocator initialised with 65536 entries [ 0.023630] Serial: AMBA PL011 UART driver [ 0.028524] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.032544] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.032994] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.033023] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.033718] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.034984] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector [ 0.036573] KASLR disabled due to lack of seed [ 0.042714] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.042730] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.042744] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.042756] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.042768] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.042780] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.042792] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042803] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.043500] cryptd: max_cpu_qlen set to 1000 [ 0.108196] raid6: neonx8 gen() 1852 MB/s [ 0.176256] raid6: neonx4 gen() 1894 MB/s [ 0.244319] raid6: neonx2 gen() 1791 MB/s [ 0.312376] raid6: neonx1 gen() 1558 MB/s [ 0.380450] raid6: int64x8 gen() 1282 MB/s [ 0.448511] raid6: int64x4 gen() 1426 MB/s [ 0.516562] raid6: int64x2 gen() 1219 MB/s [ 0.584640] raid6: int64x1 gen() 906 MB/s [ 0.584653] raid6: using algorithm neonx4 gen() 1894 MB/s [ 0.652684] raid6: .... xor() 1366 MB/s, rmw enabled [ 0.652696] raid6: using neon recovery algorithm [ 0.653961] iommu: Default domain type: Translated [ 0.653976] iommu: DMA domain TLB invalidation policy: strict mode [ 0.654228] SCSI subsystem initialized [ 0.654417] usbcore: registered new interface driver usbfs [ 0.654464] usbcore: registered new interface driver hub [ 0.654499] usbcore: registered new device driver usb [ 0.654787] pps_core: LinuxPPS API ver. 1 registered [ 0.654799] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.654824] PTP clock support registered [ 0.655108] ARM FF-A: FFA_VERSION returned not supported [ 0.655407] Advanced Linux Sound Architecture Driver Initialized. [ 0.656033] NetLabel: Initializing [ 0.656044] NetLabel: domain hash size = 128 [ 0.656054] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.656126] NetLabel: unlabeled traffic allowed by default [ 0.656138] mctp: management component transport protocol core [ 0.656150] NET: Registered PF_MCTP protocol family [ 0.656569] clocksource: Switched to clocksource arch_sys_counter [ 0.656780] VFS: Disk quotas dquot_6.6.0 [ 0.656829] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657332] AppArmor: AppArmor Filesystem Enabled [ 0.663631] NET: Registered PF_INET protocol family [ 0.663782] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.664903] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.664936] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.664960] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.665039] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.665345] TCP: Hash tables configured (established 8192 bind 8192) [ 0.665444] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665484] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665640] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.666138] Trying to unpack rootfs image as initramfs... [ 0.676905] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.679030] Initialise system trusted keyrings [ 0.679164] Key type blacklist registered [ 0.679531] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 0.684950] zbud: loaded [ 0.686513] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.688651] integrity: Platform Keyring initialized [ 0.730980] xor: measuring software checksum speed [ 0.735750] 8regs : 2100 MB/sec [ 0.740350] 32regs : 2169 MB/sec [ 0.745258] arm64_neon : 2037 MB/sec [ 0.745294] xor: using function: 32regs (2169 MB/sec) [ 0.745316] async_tx: api initialized (async) [ 0.745334] Key type asymmetric registered [ 0.745347] Asymmetric key parser 'x509' registered [ 1.170458] Freeing initrd memory: 9876K [ 1.192155] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.192292] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.192414] io scheduler mq-deadline registered [ 1.192428] io scheduler kyber registered [ 1.192659] io scheduler bfq registered [ 1.205148] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.207357] misc dump reg init [ 1.210363] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.214049] loop: module loaded [ 1.216862] usbcore: registered new interface driver usb-storage [ 1.217280] mousedev: PS/2 mouse device common for all mice [ 1.218317] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.218348] sun6i-rtc 7000000.rtc: setting system clock to 2023-12-31T08:10:24 UTC (1704010224) [ 1.218456] sun6i-rtc 7000000.rtc: RTC enabled [ 1.218666] i2c_dev: i2c /dev entries driver [ 1.218890] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 1.219377] axp20x-i2c 0-0036: AXP20x variant AXP313a found [ 1.219547] axp20x-regulator axp20x-regulator: DCDC frequency on AXP313a is fixed to 3 MHz. [ 1.219566] axp20x-regulator axp20x-regulator: Error setting dcdc frequency: -22 [ 1.229679] axp20x-i2c 0-0036: AXP20X driver loaded [ 1.230355] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.231665] sdhci: Secure Digital Host Controller Interface driver [ 1.231679] sdhci: Copyright(c) Pierre Ossman [ 1.231710] Synopsys Designware Multimedia Card Interface Driver [ 1.232343] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.232755] ledtrig-cpu: registered to indicate activity on CPUs [ 1.233030] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 1.233465] hid: raw HID events driver (C) Jiri Kosina [ 1.233550] usbcore: registered new interface driver usbhid [ 1.233564] usbhid: USB HID core driver [ 1.277731] NET: Registered PF_INET6 protocol family [ 1.298897] Segment Routing with IPv6 [ 1.299004] In-situ OAM (IOAM) with IPv6 [ 1.299113] NET: Registered PF_PACKET protocol family [ 1.299218] 8021q: 802.1Q VLAN Support v1.8 [ 1.299362] 9pnet: Installing 9P2000 support [ 1.299466] Key type dns_resolver registered [ 1.299984] registered taskstats version 1 [ 1.300016] Loading compiled-in X.509 certificates [ 1.303405] Loaded X.509 cert 'Build time autogenerated kernel key: 670a8c44863ab36e3a91b0b7e24e53744b2354d7' [ 1.305577] zswap: loaded using pool zstd/z3fold [ 1.305911] Key type .fscrypt registered [ 1.305924] Key type fscrypt-provisioning registered [ 1.306970] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.307205] Key type encrypted registered [ 1.307226] AppArmor: AppArmor sha1 policy hashing enabled [ 1.307274] ima: No TPM chip found, activating TPM-bypass! [ 1.307303] ima: Allocated hash algorithm: sha1 [ 1.307340] ima: No architecture policies found [ 1.307388] evm: Initialising EVM extended attributes: [ 1.307399] evm: security.selinux [ 1.307408] evm: security.SMACK64 [ 1.307417] evm: security.SMACK64EXEC [ 1.307427] evm: security.SMACK64TRANSMUTE [ 1.307436] evm: security.SMACK64MMAP [ 1.307445] evm: security.apparmor [ 1.307454] evm: security.ima [ 1.307463] evm: security.capability [ 1.307472] evm: HMAC attrs: 0x1 [ 1.330185] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.330801] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.331089] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 1.331563] printk: console [ttyS0] disabled [ 1.331645] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 285, base_baud = 1500000) is a 16550A [ 2.723886] printk: console [ttyS0] enabled [ 2.728875] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.736651] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.760300] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e85e48) [ 2.768055] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e8a620) [ 2.776149] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e82e20) [ 2.784576] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.792560] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.802645] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.810529] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e84f08) [ 2.818372] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.826183] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.833483] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator [ 2.842602] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.843728] spi-nor spi0.0: ZB25VQ128A (16384 Kbytes) [ 2.869869] sun50i-cpufreq-nvmem: will use speed0 CPU OPPs [ 2.879624] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1032000 KHz, changing to: 1200000 KHz [ 2.890581] OF: /thermal-zones/gpu-thermal/cooling-maps/map0: could not get #cooling-cells for /soc/gpu@1800000 [ 2.900689] thermal_sys: Add a cooling_device property with at least one device [ 2.908003] thermal thermal_zone0: binding zone gpu-thermal with cdev cpufreq-cpu0 failed:-2 [ 2.916808] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator [ 2.926204] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.927067] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.928407] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 2.928491] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 2.929198] ehci-platform 5200000.usb: EHCI Host Controller [ 2.929215] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1 [ 2.929283] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 2.929651] ehci-platform 5310000.usb: EHCI Host Controller [ 2.929662] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 2 [ 2.929707] ehci-platform 5311000.usb: EHCI Host Controller [ 2.929715] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 2.929717] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3 [ 2.929770] ehci-platform 5311000.usb: irq 294, io mem 0x05311000 [ 2.930122] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 2.930133] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 4 [ 2.930161] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 2.930175] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 5 [ 2.930185] ohci-platform 5200400.usb: irq 295, io mem 0x05200400 [ 2.930220] ohci-platform 5310400.usb: irq 296, io mem 0x05310400 [ 2.930495] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.930505] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.930567] ohci-platform 5311400.usb: irq 297, io mem 0x05311400 [ 2.935859] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.944577] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.960573] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 2.963957] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.974647] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.977491] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.977498] usb usb1: Product: EHCI Host Controller [ 2.977510] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 2.983080] usb usb1: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.036989] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.037298] usb usb1: SerialNumber: 5200000.usb [ 3.046904] mmc1: new high speed SDHC card at address 0001 [ 3.051570] hub 1-0:1.0: USB hub found [ 3.052415] ALSA device list: [ 3.052418] #0: audiocodec [ 3.052422] #1: ahubdam [ 3.052425] #2: ahubhdmi [ 3.057891] mmcblk1: mmc1:0001 SD16G 29.5 GiB [ 3.063874] hub 1-0:1.0: 1 port detected [ 3.073359] mmcblk1: p1 [ 3.078143] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.173126] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.173286] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.194054] mmc0: new high speed SDIO card at address 8800 [ 3.196954] usb usb2: Product: EHCI Host Controller [ 3.214537] usb usb2: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.214543] usb usb2: SerialNumber: 5310000.usb [ 3.225585] hub 2-0:1.0: USB hub found [ 3.229533] hub 2-0:1.0: 1 port detected [ 3.233793] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.242068] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.249304] usb usb6: Product: Generic Platform OHCI controller [ 3.255228] usb usb6: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.261414] usb usb6: SerialNumber: 5311400.usb [ 3.266190] hub 6-0:1.0: USB hub found [ 3.269968] hub 6-0:1.0: 1 port detected [ 3.274203] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.282487] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.289727] usb usb4: Product: Generic Platform OHCI controller [ 3.295659] usb usb4: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.301854] usb usb4: SerialNumber: 5200400.usb [ 3.306766] hub 4-0:1.0: USB hub found [ 3.310580] hub 4-0:1.0: 1 port detected [ 3.314987] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.323269] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.330499] usb usb5: Product: Generic Platform OHCI controller [ 3.336424] usb usb5: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.342607] usb usb5: SerialNumber: 5310400.usb [ 3.347399] hub 5-0:1.0: USB hub found [ 3.351192] hub 5-0:1.0: 1 port detected [ 3.355468] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.363743] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.370972] usb usb3: Product: EHCI Host Controller [ 3.375860] usb usb3: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.382046] usb usb3: SerialNumber: 5311000.usb [ 3.386830] hub 3-0:1.0: USB hub found [ 3.390609] hub 3-0:1.0: 1 port detected [ 3.395588] Freeing unused kernel memory: 2752K [ 3.408623] Run /init as init process [ 3.764143] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pi not found, using dummy regulator [ 3.773308] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.779727] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.785763] dwmac-sun8i 5020000.ethernet: No regulator found [ 3.791587] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.797403] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 3.807035] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.814340] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.821599] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.826614] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.833443] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.839142] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.961069] dwmac-sun8i 5020000.ethernet: EMAC reset timeout [ 3.966810] dwmac-sun8i 5020000.ethernet eth0: stmmac_dvr_remove: removing driver [ 3.989251] dwmac-sun8i: probe of 5020000.ethernet failed with error -110 [ 4.220631] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 5.133422] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.166130] systemd[1]: Detected architecture arm64. [ 5.181538] systemd[1]: Hostname set to . [ 5.854805] systemd[1]: Queued start job for default target graphical.target. [ 5.946977] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.956755] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.966643] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 5.975852] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 5.987166] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.998205] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 6.010966] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 6.018805] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 6.027884] systemd[1]: Reached target paths.target - Path Units. [ 6.034132] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 6.041484] systemd[1]: Reached target slices.target - Slice Units. [ 6.047977] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 6.056907] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 6.065881] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 6.075425] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 6.084147] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 6.093480] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 6.102284] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 6.110841] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 6.161135] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 6.173661] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 6.186544] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 6.195380] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.215222] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 6.228041] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 6.241796] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 6.254859] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 6.267388] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 6.279838] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 6.292395] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 6.304011] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 6.312266] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 6.334289] systemd[1]: Starting systemd-journald.service - Journal Service... [ 6.361737] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 6.370130] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.374200] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 6.382970] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.405004] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 6.419453] fuse: init (API version 7.37) [ 6.419804] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 6.431945] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.440999] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.445755] EXT4-fs (mmcblk1p1): re-mounted. Quota mode: none. [ 6.458174] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 6.467843] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.477945] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.485708] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.495338] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 6.503022] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 6.525742] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.533804] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.543807] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 6.551267] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 6.559586] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.666427] Adding 1092604k swap on /var/swap. Priority:-2 extents:4 across:1133564k SSFS Debian GNU/Linux 12 DietPi ttyS0 DietPi login: dietpi Password: Linux DietPi 6.1.31-sun50iw9 #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law.   ───────────────────────────────────────────────────── DietPi v8.25.1 : 08:11 - Sun 12/31/23 ───────────────────────────────────────────────────── - Device model : Orange Pi Zero 3 (aarch64) - CPU temp : 43 °C / 109 °F : Optimal temperature - LAN IP : 172.17.0.1 (docker0) curl: (6) Could not resolve host: dietpi.com ───────────────────────────────────────────────────── DietPi Team : https://github.com/MichaIng/DietPi#the-dietpi-project-team Patreon Legends : Chris Gelatt, ADSB.im Website : https://dietpi.com/ | https://twitter.com/DietPi_ Contribute : https://dietpi.com/contribute.html Web Hosting by : https://myvirtualserver.com dietpi-launcher : All the DietPi programs in one place dietpi-config : Feature rich configuration tool for your device dietpi-software : Select optimised software for installation htop : Resource monitor cpu : Shows CPU information and stats [?2004hdietpi@DietPi:~$ ip addr [?2004l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:d3:52:e9:e0 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever [?2004hdietpi@DietPi:~$ ip addrsudo rebootvim /etc/network/interfaces [?2004l [?25l"/etc/network/interfaces" 18L, 443B▽ Pzz\[0%m # Location: /etc/network/interfaces # Please modify network settings via: dietpi-config# Or create your own drop-ins in: /etc/network/interfaces.d/# Drop-in configs source interfaces.d/* # Ethernet allow-hotplug eth0 iface eth0 inet dhcp #dns-nameservers 9.9.9.9 149.112.112.112 # WiFi #allow-hotplug wlan0 iface wlan0 inet dhcp #dns-nameservers 9.9.9.9 149.112.112.112 wireless-power off wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf ~ ~ ~ ~ ~12,0-1All[?25h[?25l^[ [?25h[?25l~@k 1,1 [?25h[?25l~@k 0[?25h[?25l~@k 9,1 [?25h[?25l~@k 8[?25h[?25lo -- INSERT --9,3All#9,3All[?25h[?25l2[?25h[?25l1[?25h[?25l10,1[?25h[?25laallow-hotplug eth02[?25h[?25l3[?25h[?25l4[?25h[?25l5[?25h[?25l6[?25h[?25l7[?25h[?25l8[?25h[?25l9[?25h[?25l10[?25h[?25l1[?25h[?25l2[?25h[?25l3[?25h[?25l4[?25h[?25l5[?25h[?25l eth04[?25h[?25l eth03[?25h[?25l eth02[?25h[?25l eth01[?25h[?25l eth00[?25h[?25l eth09 [?25h[?25l eth08[?25h[?25l eth07[?25h[?25l eth06[?25h[?25l eth05[?25h[?25l eth04[?25h[?25l eth03[?25h[?25l eth02[?25h[?25l eth01[?25h[?25l ~9,1All[?25h[?25la eth02[?25h[?25lu eth03[?25h[?25lt eth04[?25h[?25lo eth05[?25h[?25l6[?25h[?25l10,6[?25h[?25l1[?25h[?25l2,1[?25h[?25l3,6[?25h[?25l4[?25h[?25l5[?25h[?25l4[?25h[?25l3[?25h[?25l2[?25h[?25l1[?25h[?25l2[?25h[?25lallow-hotplug wlan01[?25h[?25l2[?25h[?25l3[?25h[?25l4[?25h[?25l5[?25h[?25l6[?25h[?25l7[?25h[?25l8[?25h[?25l9[?25h[?25l10[?25h[?25l1[?25h[?25l2[?25h[?25l3[?25h[?25l4[?25h[?25l3[?25h[?25l4[?25h[?25l wlan03[?25h[?25l wlan02[?25h[?25l wlan01[?25h[?25l wlan00[?25h[?25l wlan09 [?25h[?25l wlan08[?25h[?25l wlan07[?25h[?25l wlan06[?25h[?25l wlan05[?25h[?25l wlan04[?25h[?25l wlan03[?25h[?25l wlan02[?25h[?25l wlan01[?25h[?25la wlan02[?25h[?25lu wlan03[?25h[?25lt wlan04[?25h[?25lo wlan05[?25h[?25l6[?25h[?25l5[?25h[?25l^[ 15,5All[?25h[?25l::[?25hwq [?25l"/etc/network/interfaces" 18L, 424B written [?25h [?2004hdietpi@DietPi:~$ sudo vim /etc/network/interfaces ip addrsudo reboot [?2004l Failed to connect to bus: No such file or directory [ 134.629346] systemd-shutdown[1]: Failed to set timeout to 10min: Invalid argument [ 134.940244] reboot: Restarting system U-Boot SPL 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) DRAM: 1024 MiB Trying to boot from MMC1 NOTICE: BL31: v2.9(debug):84de50c7 NOTICE: BL31: Built : 11:01:01, Sep 25 2023 NOTICE: BL31: Detected Allwinner H616 SoC (1823) NOTICE: BL31: Found U-Boot DTB at 0x4a082628, model: OrangePi Zero3 INFO: ARM GICv2 driver initialized INFO: Configuring SPC Controller INFO: PMIC: Probing AXP305 on RSB ERROR: RSB: set run-time address: 0x10003 INFO: Could not init RSB: -65539 INFO: BL31: Platform setup done INFO: BL31: Initializing runtime services INFO: BL31: cortex_a53: CPU workaround for erratum 855873 was applied INFO: BL31: cortex_a53: CPU workaround for erratum 1530924 was applied INFO: PSCI: Suspend is unavailable INFO: BL31: Preparing for EL3 exit to normal world INFO: Entry point address = 0x4a000000 INFO: SPSR = 0x3c9 INFO: Changed devicetree. U-Boot 2021.07-orangepi (Sep 25 2023 - 13:53:58 +0800) Allwinner Technology CPU: Allwinner H616 (SUN50I) Model: OrangePi Zero3 I2C: ready DRAM: 1 GiB MMC: mmc@4020000: 0 Loading Environment from FAT... Unable to use mmc 0:1... In: serial@5000000 Out: serial@5000000 Err: serial@5000000 Net: No ethernet found. starting USB... No working controllers found Autoboot in 1 seconds, press to stop switch to partitions #0, OK mmc0 is current device Scanning mmc 0:1... Found U-Boot script /boot/boot.scr 3337 bytes read in 3 ms (1.1 MiB/s) ## Executing script at 4fc00000 305 bytes read in 3 ms (98.6 KiB/s) 9419107 bytes read in 784 ms (11.5 MiB/s) 10113397 bytes read in 842 ms (11.5 MiB/s) 39931 bytes read in 10 ms (3.8 MiB/s) Ethernet adapter: "" Uncompressing Kernel Image Moving Image from 0x40080000 to 0x40200000, end=41800000 ## Loading init Ramdisk from Legacy Image at 4ff00000 ... Image Name: uInitrd Image Type: AArch64 Linux RAMDisk Image (gzip compressed) Data Size: 10113333 Bytes = 9.6 MiB Load Address: 00000000 Entry Point: 00000000 Verifying Checksum ... OK ## Flattened Device Tree blob at 4fa00000 Booting using the fdt blob at 0x4fa00000 Loading Ramdisk to 4965a000, end 49fff135 ... OK Loading Device Tree to 000000004964d000, end 0000000049659bfa ... OK Starting kernel ... [ 0.000000] Booting Linux on physical CPU 0x0000000000 [0x410fd034] [ 0.000000] Linux version 6.1.31-sun50iw9 (root@liuyang-WUJIE-14) (aarch64-none-linux-gnu-gcc (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 9.2.1 20191025, GNU ld (GNU Toolchain for the A-profile Architecture 9.2-2019.12 (arm-9.10)) 2.33.1.20191209) #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 [ 0.000000] Machine model: OrangePi Zero3 [ 0.000000] NUMA: No NUMA configuration found [ 0.000000] NUMA: Faking a node at [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] NUMA: NODE_DATA [mem 0x7fdc4040-0x7fdc5fff] [ 0.000000] Zone ranges: [ 0.000000] DMA [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] DMA32 empty [ 0.000000] Normal empty [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x000000004007ffff] [ 0.000000] node 0: [mem 0x0000000040080000-0x000000007fffffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x000000007fffffff] [ 0.000000] cma: Reserved 128 MiB at 0x0000000076c00000 [ 0.000000] psci: probing for conduit method from DT. [ 0.000000] psci: PSCIv1.1 detected in firmware. [ 0.000000] psci: Using standard PSCI v0.2 function IDs [ 0.000000] psci: MIGRATE_INFO_TYPE not supported. [ 0.000000] psci: SMC Calling Convention v1.4 [ 0.000000] percpu: Embedded 19 pages/cpu s37992 r8192 d31640 u77824 [ 0.000000] Detected VIPT I-cache on CPU0 [ 0.000000] CPU features: detected: ARM erratum 845719 [ 0.000000] alternatives: applying boot alternatives [ 0.000000] Fallback order for Node 0: 0 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 258048 [ 0.000000] Policy zone: DMA [ 0.000000] Kernel command line: root=UUID=c270c9eb-32ee-468a-8581-2fa6ec670353 rootfstype=ext4 rootwait console=ttyS0,115200 console=tty1 consoleblank=0 coherent_pool=2M usb-storage.quirks= net.ifnames=0 ethernet_phy= cgroup_enable=memory swapaccount=1 [ 0.000000] The swapaccount= commandline option is deprecated. Please report your usecase to linux-mm@kvack.org if you depend on this functionality. [ 0.000000] Unknown kernel command line parameters "ethernet_phy= cgroup_enable=memory", will be passed to user space. [ 0.000000] printk: log_buf_len individual max cpu contribution: 131072 bytes [ 0.000000] printk: log_buf_len total cpu_extra contributions: 393216 bytes [ 0.000000] printk: log_buf_len min size: 131072 bytes [ 0.000000] printk: log_buf_len: 524288 bytes [ 0.000000] printk: early log buf free: 128568(98%) [ 0.000000] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 7, 524288 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:off, heap free:off [ 0.000000] Memory: 861728K/1048576K available (13888K kernel code, 1462K rwdata, 3760K rodata, 2752K init, 499K bss, 55776K reserved, 131072K cma-reserved) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.000000] rcu: Hierarchical RCU implementation. [ 0.000000] rcu: RCU restricting CPUs from NR_CPUS=8 to nr_cpu_ids=4. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 25 jiffies. [ 0.000000] rcu: Adjusting geometry for rcu_fanout_leaf=16, nr_cpu_ids=4 [ 0.000000] NR_IRQS: 64, nr_irqs: 64, preallocated irqs: 0 [ 0.000000] Root IRQ handler: gic_handle_irq [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.000000] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.000001] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.000539] Console: colour dummy device 80x25 [ 0.000924] printk: console [tty1] enabled [ 0.001011] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=96000) [ 0.001035] pid_max: default: 32768 minimum: 301 [ 0.001114] LSM: Security Framework initializing [ 0.001151] Yama: becoming mindful. [ 0.001252] AppArmor: AppArmor initialized [ 0.001339] Mount-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.001362] Mountpoint-cache hash table entries: 2048 (order: 2, 16384 bytes, linear) [ 0.002376] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 0.002938] cblist_init_generic: Setting adjustable number of callback queues. [ 0.002958] cblist_init_generic: Setting shift to 2 and lim to 1. [ 0.003122] rcu: Hierarchical SRCU implementation. [ 0.003135] rcu: Max phase no-delay instances is 1000. [ 0.004271] smp: Bringing up secondary CPUs ... [ 0.004748] Detected VIPT I-cache on CPU1 [ 0.004822] cacheinfo: Unable to detect cache hierarchy for CPU 1 [ 0.004855] CPU1: Booted secondary processor 0x0000000001 [0x410fd034] [ 0.005353] Detected VIPT I-cache on CPU2 [ 0.005406] cacheinfo: Unable to detect cache hierarchy for CPU 2 [ 0.005424] CPU2: Booted secondary processor 0x0000000002 [0x410fd034] [ 0.005869] Detected VIPT I-cache on CPU3 [ 0.005925] cacheinfo: Unable to detect cache hierarchy for CPU 3 [ 0.005943] CPU3: Booted secondary processor 0x0000000003 [0x410fd034] [ 0.006002] smp: Brought up 1 node, 4 CPUs [ 0.006073] SMP: Total of 4 processors activated. [ 0.006085] CPU features: detected: 32-bit EL0 Support [ 0.006095] CPU features: detected: CRC32 instructions [ 0.006164] CPU: All CPU(s) started at EL2 [ 0.006175] alternatives: applying system-wide alternatives [ 0.007878] devtmpfs: initialized [ 0.013858] Registered cp15_barrier emulation handler [ 0.013882] Registered setend emulation handler [ 0.014035] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 7645041785100000 ns [ 0.014064] futex hash table entries: 1024 (order: 4, 65536 bytes, linear) [ 0.018995] pinctrl core: initialized pinctrl subsystem [ 0.020353] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.021660] DMA: preallocated 2048 KiB GFP_KERNEL pool for atomic allocations [ 0.022147] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA pool for atomic allocations [ 0.022508] DMA: preallocated 2048 KiB GFP_KERNEL|GFP_DMA32 pool for atomic allocations [ 0.022554] audit: initializing netlink subsys (disabled) [ 0.022684] audit: type=2000 audit(0.020:1): state=initialized audit_enabled=0 res=1 [ 0.023073] thermal_sys: Registered thermal governor 'fair_share' [ 0.023079] thermal_sys: Registered thermal governor 'bang_bang' [ 0.023092] thermal_sys: Registered thermal governor 'step_wise' [ 0.023103] thermal_sys: Registered thermal governor 'user_space' [ 0.023146] cpuidle: using governor menu [ 0.023379] hw-breakpoint: found 6 breakpoint and 4 watchpoint registers. [ 0.023468] ASID allocator initialised with 65536 entries [ 0.023603] Serial: AMBA PL011 UART driver [ 0.028523] platform 3001000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.032562] platform 6000000.hdmi: Fixed dependency cycle(s) with /soc/tcon-top@6510000 [ 0.033033] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/lcd-controller@6515000 [ 0.033063] platform 6510000.tcon-top: Fixed dependency cycle(s) with /soc/bus@1000000/mixer@100000 [ 0.033723] platform 7010000.clock: Fixed dependency cycle(s) with /soc/rtc@7000000 [ 0.034994] platform 6000000.hdmi: Fixed dependency cycle(s) with /connector [ 0.036581] KASLR disabled due to lack of seed [ 0.042691] HugeTLB: registered 1.00 GiB page size, pre-allocated 0 pages [ 0.042707] HugeTLB: 0 KiB vmemmap can be freed for a 1.00 GiB page [ 0.042721] HugeTLB: registered 32.0 MiB page size, pre-allocated 0 pages [ 0.042733] HugeTLB: 0 KiB vmemmap can be freed for a 32.0 MiB page [ 0.042745] HugeTLB: registered 2.00 MiB page size, pre-allocated 0 pages [ 0.042757] HugeTLB: 0 KiB vmemmap can be freed for a 2.00 MiB page [ 0.042769] HugeTLB: registered 64.0 KiB page size, pre-allocated 0 pages [ 0.042780] HugeTLB: 0 KiB vmemmap can be freed for a 64.0 KiB page [ 0.043492] cryptd: max_cpu_qlen set to 1000 [ 0.108299] raid6: neonx8 gen() 1846 MB/s [ 0.176365] raid6: neonx4 gen() 1895 MB/s [ 0.244439] raid6: neonx2 gen() 1791 MB/s [ 0.312513] raid6: neonx1 gen() 1558 MB/s [ 0.380588] raid6: int64x8 gen() 1282 MB/s [ 0.448662] raid6: int64x4 gen() 1426 MB/s [ 0.516723] raid6: int64x2 gen() 1219 MB/s [ 0.584806] raid6: int64x1 gen() 905 MB/s [ 0.584818] raid6: using algorithm neonx4 gen() 1895 MB/s [ 0.652859] raid6: .... xor() 1364 MB/s, rmw enabled [ 0.652871] raid6: using neon recovery algorithm [ 0.654159] iommu: Default domain type: Translated [ 0.654173] iommu: DMA domain TLB invalidation policy: strict mode [ 0.654414] SCSI subsystem initialized [ 0.654589] usbcore: registered new interface driver usbfs [ 0.654632] usbcore: registered new interface driver hub [ 0.654666] usbcore: registered new device driver usb [ 0.654950] pps_core: LinuxPPS API ver. 1 registered [ 0.654962] pps_core: Software ver. 5.3.6 - Copyright 2005-2007 Rodolfo Giometti [ 0.654987] PTP clock support registered [ 0.655272] ARM FF-A: FFA_VERSION returned not supported [ 0.655585] Advanced Linux Sound Architecture Driver Initialized. [ 0.656197] NetLabel: Initializing [ 0.656209] NetLabel: domain hash size = 128 [ 0.656219] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 0.656285] NetLabel: unlabeled traffic allowed by default [ 0.656297] mctp: management component transport protocol core [ 0.656309] NET: Registered PF_MCTP protocol family [ 0.656719] clocksource: Switched to clocksource arch_sys_counter [ 0.656973] VFS: Disk quotas dquot_6.6.0 [ 0.657021] VFS: Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 0.657523] AppArmor: AppArmor Filesystem Enabled [ 0.663745] NET: Registered PF_INET protocol family [ 0.663892] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 0.665013] tcp_listen_portaddr_hash hash table entries: 512 (order: 1, 8192 bytes, linear) [ 0.665046] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.665074] TCP established hash table entries: 8192 (order: 4, 65536 bytes, linear) [ 0.665154] TCP bind hash table entries: 8192 (order: 6, 262144 bytes, linear) [ 0.665468] TCP: Hash tables configured (established 8192 bind 8192) [ 0.665569] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665608] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 0.665762] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 0.666252] Trying to unpack rootfs image as initramfs... [ 0.675462] hw perfevents: enabled with armv8_cortex_a53 PMU driver, 7 counters available [ 0.677600] Initialise system trusted keyrings [ 0.677765] Key type blacklist registered [ 0.678108] workingset: timestamp_bits=44 max_order=18 bucket_order=0 [ 0.683511] zbud: loaded [ 0.685205] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.687338] integrity: Platform Keyring initialized [ 0.729444] xor: measuring software checksum speed [ 0.734222] 8regs : 2100 MB/sec [ 0.738822] 32regs : 2169 MB/sec [ 0.743712] arm64_neon : 2037 MB/sec [ 0.743750] xor: using function: 32regs (2169 MB/sec) [ 0.743771] async_tx: api initialized (async) [ 0.743788] Key type asymmetric registered [ 0.743801] Asymmetric key parser 'x509' registered [ 1.170909] Freeing initrd memory: 9876K [ 1.192645] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 1.192801] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 247) [ 1.192922] io scheduler mq-deadline registered [ 1.192936] io scheduler kyber registered [ 1.193130] io scheduler bfq registered [ 1.205505] Serial: 8250/16550 driver, 6 ports, IRQ sharing disabled [ 1.207698] misc dump reg init [ 1.210701] cacheinfo: Unable to detect cache hierarchy for CPU 0 [ 1.214401] loop: module loaded [ 1.217241] usbcore: registered new interface driver usb-storage [ 1.217646] mousedev: PS/2 mouse device common for all mice [ 1.218664] sun6i-rtc 7000000.rtc: registered as rtc0 [ 1.218696] sun6i-rtc 7000000.rtc: setting system clock to 2023-12-31T08:12:28 UTC (1704010348) [ 1.218806] sun6i-rtc 7000000.rtc: RTC enabled [ 1.219013] i2c_dev: i2c /dev entries driver [ 1.219237] mv64xxx_i2c 7081400.i2c: can't get pinctrl, bus recovery not supported [ 1.219755] axp20x-i2c 0-0036: AXP20x variant AXP313a found [ 1.219927] axp20x-regulator axp20x-regulator: DCDC frequency on AXP313a is fixed to 3 MHz. [ 1.219946] axp20x-regulator axp20x-regulator: Error setting dcdc frequency: -22 [ 1.230042] axp20x-i2c 0-0036: AXP20X driver loaded [ 1.230719] sunxi-wdt 30090a0.watchdog: Watchdog enabled (timeout=16 sec, nowayout=0) [ 1.232023] sdhci: Secure Digital Host Controller Interface driver [ 1.232037] sdhci: Copyright(c) Pierre Ossman [ 1.232067] Synopsys Designware Multimedia Card Interface Driver [ 1.232720] sdhci-pltfm: SDHCI platform and OF driver helper [ 1.233109] ledtrig-cpu: registered to indicate activity on CPUs [ 1.233381] SMCCC: SOC_ID: ID = jep106:091e:1823 Revision = 0x00000002 [ 1.233814] hid: raw HID events driver (C) Jiri Kosina [ 1.233892] usbcore: registered new interface driver usbhid [ 1.233905] usbhid: USB HID core driver [ 1.277929] NET: Registered PF_INET6 protocol family [ 1.299129] Segment Routing with IPv6 [ 1.299239] In-situ OAM (IOAM) with IPv6 [ 1.299377] NET: Registered PF_PACKET protocol family [ 1.299480] 8021q: 802.1Q VLAN Support v1.8 [ 1.299629] 9pnet: Installing 9P2000 support [ 1.299714] Key type dns_resolver registered [ 1.300267] registered taskstats version 1 [ 1.300300] Loading compiled-in X.509 certificates [ 1.303703] Loaded X.509 cert 'Build time autogenerated kernel key: 670a8c44863ab36e3a91b0b7e24e53744b2354d7' [ 1.305858] zswap: loaded using pool zstd/z3fold [ 1.306218] Key type .fscrypt registered [ 1.306231] Key type fscrypt-provisioning registered [ 1.307202] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=no [ 1.307424] Key type encrypted registered [ 1.307446] AppArmor: AppArmor sha1 policy hashing enabled [ 1.307475] ima: No TPM chip found, activating TPM-bypass! [ 1.307504] ima: Allocated hash algorithm: sha1 [ 1.307540] ima: No architecture policies found [ 1.307588] evm: Initialising EVM extended attributes: [ 1.307599] evm: security.selinux [ 1.307608] evm: security.SMACK64 [ 1.307617] evm: security.SMACK64EXEC [ 1.307627] evm: security.SMACK64TRANSMUTE [ 1.307636] evm: security.SMACK64MMAP [ 1.307645] evm: security.apparmor [ 1.307654] evm: security.ima [ 1.307663] evm: security.capability [ 1.307672] evm: HMAC attrs: 0x1 [ 1.330275] sun50i-h616-pinctrl 300b000.pinctrl: initialized sunXi PIO driver [ 1.330839] sun50i-h616-r-pinctrl 7022000.pinctrl: initialized sunXi PIO driver [ 1.331105] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-ph not found, using dummy regulator [ 1.331591] printk: console [ttyS0] disabled [ 1.331674] 5000000.serial: ttyS0 at MMIO 0x5000000 (irq = 285, base_baud = 1500000) is a 16550A [ 2.724004] printk: console [ttyS0] enabled [ 2.728972] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.736753] debugfs: Directory '1100000.mixer' with parent 'regmap' already present! [ 2.760403] sun4i-drm display-engine: bound 1100000.mixer (ops 0xffff800008e85e48) [ 2.768164] sun4i-drm display-engine: bound 6510000.tcon-top (ops 0xffff800008e8a620) [ 2.776259] sun4i-drm display-engine: bound 6515000.lcd-controller (ops 0xffff800008e82e20) [ 2.784682] sun8i-dw-hdmi 6000000.hdmi: supply hvcc not found, using dummy regulator [ 2.792637] sun8i-dw-hdmi 6000000.hdmi: Detected HDMI TX controller v2.12a with HDCP (DWC HDMI 2.0 TX PHY) [ 2.802700] sun8i-dw-hdmi 6000000.hdmi: registered DesignWare HDMI I2C bus driver [ 2.810594] sun4i-drm display-engine: bound 6000000.hdmi (ops 0xffff800008e84f08) [ 2.818463] [drm] Initialized sun4i-drm 1.0.0 20150629 for display-engine on minor 0 [ 2.826274] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.833577] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pc not found, using dummy regulator [ 2.842688] sun4i-drm display-engine: [drm] Cannot find any crtc or sizes [ 2.843787] spi-nor spi0.0: ZB25VQ128A (16384 Kbytes) [ 2.870038] sun50i-cpufreq-nvmem: will use speed0 CPU OPPs [ 2.879786] cpufreq: cpufreq_online: CPU0: Running at unlisted initial frequency: 1032000 KHz, changing to: 1200000 KHz [ 2.890743] OF: /thermal-zones/gpu-thermal/cooling-maps/map0: could not get #cooling-cells for /soc/gpu@1800000 [ 2.900850] thermal_sys: Add a cooling_device property with at least one device [ 2.908160] thermal thermal_zone0: binding zone gpu-thermal with cdev cpufreq-cpu0 failed:-2 [ 2.916963] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pg not found, using dummy regulator [ 2.926357] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pf not found, using dummy regulator [ 2.927239] sunxi-mmc 4021000.mmc: allocated mmc-pwrseq [ 2.928463] usb_phy_generic usb_phy_generic.4.auto: supply vcc not found, using dummy regulator [ 2.928529] usb_phy_generic usb_phy_generic.4.auto: dummy supplies not allowed for exclusive requests [ 2.929415] ehci-platform 5200000.usb: EHCI Host Controller [ 2.929431] ehci-platform 5200000.usb: new USB bus registered, assigned bus number 1 [ 2.929497] ehci-platform 5200000.usb: irq 292, io mem 0x05200000 [ 2.929856] ehci-platform 5310000.usb: EHCI Host Controller [ 2.929866] ehci-platform 5310000.usb: new USB bus registered, assigned bus number 2 [ 2.929907] ehci-platform 5311000.usb: EHCI Host Controller [ 2.929917] ehci-platform 5311000.usb: new USB bus registered, assigned bus number 3 [ 2.929926] ehci-platform 5310000.usb: irq 293, io mem 0x05310000 [ 2.929974] ehci-platform 5311000.usb: irq 294, io mem 0x05311000 [ 2.930318] ohci-platform 5200400.usb: Generic Platform OHCI controller [ 2.930329] ohci-platform 5200400.usb: new USB bus registered, assigned bus number 4 [ 2.930351] ohci-platform 5310400.usb: Generic Platform OHCI controller [ 2.930362] ohci-platform 5310400.usb: new USB bus registered, assigned bus number 5 [ 2.930380] ohci-platform 5200400.usb: irq 295, io mem 0x05200400 [ 2.930410] ohci-platform 5310400.usb: irq 296, io mem 0x05310400 [ 2.930707] ohci-platform 5311400.usb: Generic Platform OHCI controller [ 2.930718] ohci-platform 5311400.usb: new USB bus registered, assigned bus number 6 [ 2.930766] ohci-platform 5311400.usb: irq 297, io mem 0x05311400 [ 2.936137] sunxi-mmc 4020000.mmc: Got CD GPIO [ 2.949028] ehci-platform 5200000.usb: USB 2.0 started, EHCI 1.00 [ 2.959254] ALSA device list: [ 2.963998] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 2.971547] #0: audiocodec [ 2.971552] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 2.971557] #1: ahubdam [ 2.971561] ehci-platform 5310000.usb: USB 2.0 started, EHCI 1.00 [ 2.971565] usb usb1: Product: EHCI Host Controller [ 2.971570] #2: ahubhdmi [ 2.971570] usb usb1: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 2.971574] usb usb1: SerialNumber: 5200000.usb [ 2.971908] hub 1-0:1.0: USB hub found [ 2.983956] sunxi-mmc 4020000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 2.991014] hub 1-0:1.0: 1 port detected [ 3.000711] ehci-platform 5311000.usb: USB 2.0 started, EHCI 1.00 [ 3.004669] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.034576] mmc1: host does not support reading read-only switch, assuming write-enable [ 3.037433] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.037438] usb usb2: Product: EHCI Host Controller [ 3.039301] mmc1: new high speed SDHC card at address 0001 [ 3.045180] usb usb2: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.045732] mmcblk1: mmc1:0001 SD16G 29.5 GiB [ 3.051281] usb usb2: SerialNumber: 5310000.usb [ 3.052846] mmcblk1: p1 [ 3.057649] hub 2-0:1.0: USB hub found [ 3.177263] sunxi-mmc 4021000.mmc: initialized, max. request size: 16384 KB, uses new timings mode [ 3.182884] hub 2-0:1.0: 1 port detected [ 3.227858] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.236129] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.243360] usb usb4: Product: Generic Platform OHCI controller [ 3.249273] usb usb4: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.255454] usb usb4: SerialNumber: 5200400.usb [ 3.260234] hub 4-0:1.0: USB hub found [ 3.264014] hub 4-0:1.0: 1 port detected [ 3.268269] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.276021] mmc0: new high speed SDIO card at address 8800 [ 3.276546] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.289262] usb usb5: Product: Generic Platform OHCI controller [ 3.295197] usb usb5: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.301391] usb usb5: SerialNumber: 5310400.usb [ 3.306366] hub 5-0:1.0: USB hub found [ 3.310196] hub 5-0:1.0: 1 port detected [ 3.314698] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 3.322996] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.330244] usb usb6: Product: Generic Platform OHCI controller [ 3.336186] usb usb6: Manufacturer: Linux 6.1.31-sun50iw9 ohci_hcd [ 3.342391] usb usb6: SerialNumber: 5311400.usb [ 3.347374] hub 6-0:1.0: USB hub found [ 3.351171] hub 6-0:1.0: 1 port detected [ 3.355396] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 3.363672] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.370898] usb usb3: Product: EHCI Host Controller [ 3.375780] usb usb3: Manufacturer: Linux 6.1.31-sun50iw9 ehci_hcd [ 3.381960] usb usb3: SerialNumber: 5311000.usb [ 3.386728] hub 3-0:1.0: USB hub found [ 3.390507] hub 3-0:1.0: 1 port detected [ 3.395480] Freeing unused kernel memory: 2752K [ 3.408797] Run /init as init process [ 3.761542] sun50i-h616-pinctrl 300b000.pinctrl: supply vcc-pi not found, using dummy regulator [ 3.770680] dwmac-sun8i 5020000.ethernet: IRQ eth_wake_irq not found [ 3.777120] dwmac-sun8i 5020000.ethernet: IRQ eth_lpi not found [ 3.783161] dwmac-sun8i 5020000.ethernet: No regulator found [ 3.788933] dwmac-sun8i 5020000.ethernet: PTP uses main clock [ 3.794740] dwmac-sun8i 5020000.ethernet: Current syscon value is not the default 58000 (expect 0) [ 3.804217] dwmac-sun8i 5020000.ethernet: No HW DMA feature register supported [ 3.811575] dwmac-sun8i 5020000.ethernet: RX Checksum Offload Engine supported [ 3.818843] dwmac-sun8i 5020000.ethernet: COE Type 2 [ 3.823851] dwmac-sun8i 5020000.ethernet: TX Checksum insertion supported [ 3.830671] dwmac-sun8i 5020000.ethernet: Normal descriptors [ 3.836353] dwmac-sun8i 5020000.ethernet: Chain mode enabled [ 3.957766] dwmac-sun8i 5020000.ethernet: EMAC reset timeout [ 3.963496] dwmac-sun8i 5020000.ethernet eth0: stmmac_dvr_remove: removing driver [ 3.985756] dwmac-sun8i: probe of 5020000.ethernet failed with error -110 [ 4.209581] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 5.125573] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 5.158279] systemd[1]: Detected architecture arm64. [ 5.173816] systemd[1]: Hostname set to . [ 5.856064] systemd[1]: Queued start job for default target graphical.target. [ 5.935540] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 5.945261] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 5.955151] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 5.964429] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 5.975746] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 5.986837] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 5.999589] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 6.007422] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 6.016509] systemd[1]: Reached target paths.target - Path Units. [ 6.022758] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 6.030109] systemd[1]: Reached target slices.target - Slice Units. [ 6.036601] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 6.045517] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 6.054513] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 6.064083] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 6.072834] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 6.082164] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 6.090970] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 6.099498] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 6.141543] systemd[1]: Mounting dev-hugepages.mount - Huge Pages File System... [ 6.156601] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 6.169580] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 6.178394] systemd[1]: sys-kernel-tracing.mount - Kernel Trace File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/tracing). [ 6.201261] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 6.214264] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 6.228060] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 6.241577] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 6.254656] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 6.267017] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 6.279701] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 6.291695] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 6.299936] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 6.322574] systemd[1]: Starting systemd-journald.service - Journal Service... [ 6.330254] device-mapper: core: CONFIG_IMA_DISABLE_HTABLE is disabled. Duplicate IMA measurements will not be recorded in the IMA log. [ 6.342945] fuse: init (API version 7.37) [ 6.346969] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 6.348136] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 6.368184] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 6.382424] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 6.397558] systemd[1]: Mounted dev-hugepages.mount - Huge Pages File System. [ 6.406201] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 6.415064] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 6.424281] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 6.434189] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 6.442545] EXT4-fs (mmcblk1p1): re-mounted. Quota mode: none. [ 6.452378] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 6.481542] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 6.491395] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 6.499085] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 6.508422] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 6.516668] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 6.526500] systemd[1]: Started systemd-journald.service - Journal Service. [ 6.623480] Adding 1092604k swap on /var/swap. Priority:-2 extents:4 across:1133564k SSFS Debian GNU/Linux 12 DietPi ttyS0 DietPi login: dietpi Password: Linux DietPi 6.1.31-sun50iw9 #1.0.2 SMP Mon Sep 25 13:54:37 CST 2023 aarch64 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law.   ───────────────────────────────────────────────────── DietPi v8.25.1 : 08:13 - Sun 12/31/23 ───────────────────────────────────────────────────── - Device model : Orange Pi Zero 3 (aarch64) - CPU temp : 43 °C / 109 °F : Optimal temperature - LAN IP : 172.17.0.1 (docker0) curl: (6) Could not resolve host: dietpi.com ───────────────────────────────────────────────────── DietPi Team : https://github.com/MichaIng/DietPi#the-dietpi-project-team Patreon Legends : Chris Gelatt, ADSB.im Website : https://dietpi.com/ | https://twitter.com/DietPi_ Contribute : https://dietpi.com/contribute.html Web Hosting by : https://myvirtualserver.com dietpi-launcher : All the DietPi programs in one place dietpi-config : Feature rich configuration tool for your device dietpi-software : Select optimised software for installation htop : Resource monitor cpu : Shows CPU information and stats [?2004hdietpi@DietPi:~$ ip addr [?2004l 1: lo: mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host noprefixroute valid_lft forever preferred_lft forever 3: docker0: mtu 1500 qdisc noqueue state DOWN group default link/ether 02:42:8d:13:d7:19 brd ff:ff:ff:ff:ff:ff inet 172.17.0.1/16 brd 172.17.255.255 scope global docker0 valid_lft forever preferred_lft forever [?2004hdietpi@DietPi:~$ ip addrsudo rebootvim /etc/network/interfaces [?2004l [?25l"/etc/network/interfaces" 18L, 424B▽ Pzz\[0%m # Location: /etc/network/interfaces # Please modify network settings via: dietpi-config# Or create your own drop-ins in: /etc/network/interfaces.d/# Drop-in configs source interfaces.d/* # Ethernet auto eth0 iface eth0 inet dhcp #dns-nameservers 9.9.9.9 149.112.112.112 # WiFi auto wlan0 iface wlan0 inet dhcp #dns-nameservers 9.9.9.9 149.112.112.112 wireless-power off wpa-conf /etc/wpa_supplicant/wpa_supplicant.conf ~ ~ ~ ~ ~15,5All[?25h[?25l~@k 4[?25h[?25l~@k 3[?25h[?25l~@k 2,0-1[?25h[?25l~@k 1,5 [?25h[?25l~@k 0[?25h[?25l~@k 9,5 [?25h[?25l~@k 8[?25h[?25l~@k 7,0-1[?25h[?25l~@k 6,5 [?25h[?25l~@k 4[?25h[?25l~@k 3[?25h[?25l~@k 2[?25h[?25l~@k 1[?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k [?25h[?25l~@k [?25h[?25l::[?25hq [?25l[?25h[?2004hdietpi@DietPi:~$ sudo dietpi-config [?2004l )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Hardware : Orange Pi Zero 3 (aarch64)││││1 : Display Options (B││2 : Audio Options││3 : Performance Options││4 : Advanced Options││5 : Language/Regional Options││6 : Security Options││7 : Network Options: Adapters││8 : Network Options: Misc││9 : AutoStart Options││10 : Tools│││││││││└──────────────────────────────────────────────────────────────────────────────┘1 : Display Options 2 : Audio Options (B2 : Audio Options 3 : Performance Options (B3 : Performance Options 4 : Advanced Options (B4 : Advanced Options 5 : Language/Regional Options(B5 : Language/Regional Options6 : Security Options (B6 : Security Options 7 : Network Options: Adapters[?25h(B(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Please select an option to change:││││●─ Adapter Options ─────────────●││Ethernet : Not Found | [On] | Disconnected││WiFi: Not Found | [On] | Disconnected││ ●─ Additional Options ──────────●(B││IPv6: [On]││Proxy : [Off]││Test: Run internet connection test│││││││││└──────────────────────────────────────────────────────────────────────────────┘WiFi : Not Found | [On] | Disconnected(B ●─ Additional Options ──────────●Ethernet : Not Found | [On] | Disconnected(BWiFi : Not Found | [On] | DisconnectedEthernet : Not Found | [On] | DisconnectedWiFi : Not Found | [On] | Disconnected(BWiFi : Not Found | [On] | Disconnected ●─ Additional Options ──────────●(B ●─ Additional Options ──────────●IPv6 : [On] (BIPv6 : [On] Proxy : [Off] (BProxy : [Off] Test : Run internet connection test Proxy : [Off] (BTest : Run internet connection test IPv6 : [On] (BProxy : [Off]  ●─ Additional Options ──────────●(BIPv6 : [On] WiFi : Not Found | [On] | Disconnected(B ●─ Additional Options ──────────●Ethernet : Not Found | [On] | Disconnected(BWiFi : Not Found | [On] | Disconnected[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ No Ethernet adapter was detected on your device.││││(B│││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Please select an option to change:││││●─ Adapter Options ─────────────●││Ethernet : Not Found | [On] | Disconnected││WiFi: Not Found | [On] | Disconnected││ ●─ Additional Options ──────────●(B││IPv6: [On]││Proxy : [Off]││Test: Run internet connection test│││││││││└──────────────────────────────────────────────────────────────────────────────┘WiFi : Not Found | [On] | Disconnected(B ●─ Additional Options ──────────●Ethernet : Not Found | [On] | Disconnected(BWiFi : Not Found | [On] | DisconnectedEthernet : Not Found | [On] | DisconnectedWiFi : Not Found | [On] | Disconnected[?25h(B(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ No WiFi adapter was detected on your device.││││ Would you like to disable WiFi?││ - NB: Connections may drop!││││(B│││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Please select an option to change:││││●─ Adapter Options ─────────────●││Ethernet : Not Found | [On] | Disconnected││WiFi: Not Found | [On] | Disconnected││ ●─ Additional Options ──────────●(B││IPv6: [On]││Proxy : [Off]││Test: Run internet connection test│││││││││└──────────────────────────────────────────────────────────────────────────────┘WiFi : Not Found | [On] | Disconnected(B ●─ Additional Options ──────────●Ethernet : Not Found | [On] | Disconnected(BWiFi : Not Found | [On] | Disconnected[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ No Ethernet adapter was detected on your device.││││(B│││└──────────────────────────────────────────────────────────────────────────────┘[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Please select an option to change:││││●─ Adapter Options ─────────────●││Ethernet : Not Found | [On] | Disconnected││WiFi: Not Found | [On] | Disconnected││ ●─ Additional Options ──────────●(B││IPv6: [On]││Proxy : [Off]││Test: Run internet connection test│││││││││└──────────────────────────────────────────────────────────────────────────────┘WiFi : Not Found | [On] | Disconnected(B ●─ Additional Options ──────────●[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ No WiFi adapter was detected on your device.││││ Would you like to disable WiFi?││ - NB: Connections may drop!││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h(B  [ ] DietPi-Config | sed --follow-symlinks -i / iw dev .* set power_save /d /etc/network/interfaces.  [ OK ] DietPi-Config | sed --follow-symlinks -i / iw dev .* set power_save /d /etc/network/interfaces  [ SUB1 ] DietPi-Set_hardware > wifimodules (disable)  [ ] DietPi-Set_hardware | eval echo 'blacklist sprdwl_ng' >> /etc/modprobe.d/dietpi-disable_wifi.conf.  [ OK ] DietPi-Set_hardware | eval echo 'blacklist sprdwl_ng' >> /etc/modprobe.d/dietpi-disable_wifi.conf  [ ] DietPi-Set_hardware | modprobe -rf sprdwl_ng.  [ OK ] DietPi-Set_hardware | modprobe -rf sprdwl_ng  [ ] DietPi-Set_hardware | eval echo 'blacklist cfg80211' >> /etc/modprobe.d/dietpi-disable_wifi.conf.  [ OK ] DietPi-Set_hardware | eval echo 'blacklist cfg80211' >> /etc/modprobe.d/dietpi-disable_wifi.conf  [ ] DietPi-Set_hardware | modprobe -rf cfg80211.  [ OK ] DietPi-Set_hardware | modprobe -rf cfg80211  [ OK ] wifimodules disable | Completed )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ Would you like to purge all WiFi related APT packages?││││ This will free up space, but an internet-capable Ethernet connection is││ required to re-enable WiFi functionality.││││ Affected packages: iw wireless-tools wpasupplicant wireless-regdb crda││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h(B  [ INFO ] DietPi-Config | APT purge iw wireless-tools wpasupplicant wireless-regdb crda, please wait... Reading package lists... Building dependency tree... Reading state information... The following packages will be REMOVED: iw* libdbus-1-3* libiw30* libnl-route-3-200* libpcsclite1* wireless-regdb* wireless-tools* wpasupplicant* 0 upgraded, 0 newly installed, 8 to remove and 0 not upgraded. After this operation, 6250 kB disk space will be freed. (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19183 files and directories currently installed.) Removing iw (5.19-1) ... Removing wpasupplicant (2:2.10-12) ... Removing libdbus-1-3:arm64 (1.14.10-1~deb12u1) ... Removing wireless-tools (30~pre9-14) ... Removing libiw30:arm64 (30~pre9-14) ... Removing libnl-route-3-200:arm64 (3.7.0-0.2+b1) ... Removing libpcsclite1:arm64 (1.9.9-2) ... Removing wireless-regdb (2022.06.06-1) ... update-alternatives: removing manually selected alternative - switching regulatory.db to auto mode Processing triggers for libc-bin (2.36-9+deb12u3) ... (Reading database ... (Reading database ... 5% (Reading database ... 10% (Reading database ... 15% (Reading database ... 20% (Reading database ... 25% (Reading database ... 30% (Reading database ... 35% (Reading database ... 40% (Reading database ... 45% (Reading database ... 50% (Reading database ... 55% (Reading database ... 60% (Reading database ... 65% (Reading database ... 70% (Reading database ... 75% (Reading database ... 80% (Reading database ... 85% (Reading database ... 90% (Reading database ... 95% (Reading database ... 100% (Reading database ... 19044 files and directories currently installed.) Purging configuration files for wireless-tools (30~pre9-14) ... Purging configuration files for wpasupplicant (2:2.10-12) ... dpkg: warning: while removing wpasupplicant, directory '/etc/wpa_supplicant' not empty so not removed  [ OK ] DietPi-Config | APT purge iw wireless-tools wpasupplicant wireless-regdb crda  [ INFO ] DietPi-Config | Dropping network connections, please wait...  [ INFO ] DietPi-Config | Restarting network connections, please wait...  [ ] DietPi-Config | systemctl daemon-reload. ..  ..  ..  ..  .. . [ OK ] DietPi-Config | systemctl daemon-reload Internet Systems Consortium DHCP Client 4.4.3-P1 Copyright 2004-2022 Internet Systems Consortium. All rights reserved. For info, please visit https://www.isc.org/software/dhcp/ Cannot find device "eth0" Failed to get interface index: No such device If you think you have received this message due to a bug rather than a configuration issue please read the section on submitting bugs on either our web page at www.isc.org or in the README file before submitting a bug. These pages explain the proper process and the information we find helpful for debugging. exiting. ifup: failed to bring up eth0  [ INFO ] DietPi-Config | Reloading networking data, please wait...  [ OK ] DietPi-Config | Network restarted )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 ┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│ Please select an option to change:││││●─ Adapter Options ──────────────●││Ethernet : Not Found | [On] | Disconnected││WiFi: Not Found | [Off] | Disconnected││ ●─ Additional Options ───────────●(B││IPv6: [On]││Proxy : [Off]││Test: Run internet connection test│││││││││└──────────────────────────────────────────────────────────────────────────────┘WiFi : Not Found | [Off] | Disconnected(B ●─ Additional Options ───────────●WiFi : Not Found | [Off] | Disconnected ●─ Additional Options ───────────●WiFi : Not Found | [Off] | Disconnected(B ●─ Additional Options ───────────●[?25h(B )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐│││ WiFi must be enabled before settings can be changed.││││ Would you like to enable WiFi now?││ - NB: Connections may drop!││││(B│││└──────────────────────────────────────────────────────────────────────────────┘(B[?25h(B  [ ] DietPi-Config | sed --follow-symlinks -i / iw dev .* set power_save /d /etc/network/interfaces.  [ OK ] DietPi-Config | sed --follow-symlinks -i / iw dev .* set power_save /d /etc/network/interfaces  [ ] DietPi-WiFiDB | mv /boot/dietpi-wifi.txt /var/lib/dietpi/dietpi-wifi.db.  [ OK ] DietPi-WiFiDB | mv /boot/dietpi-wifi.txt /var/lib/dietpi/dietpi-wifi.db  [ ] DietPi-WiFiDB | mkdir -p /etc/wpa_supplicant.  [ OK ] DietPi-WiFiDB | mkdir -p /etc/wpa_supplicant  [ ] DietPi-WiFiDB | eval > /var/lib/dietpi/dietpi-wifi.db.  [ OK ] DietPi-WiFiDB | eval > /var/lib/dietpi/dietpi-wifi.db  [ INFO ] DietPi-WiFiDB | Applied WiFi DB slot 0 with SSID ""  [ INFO ] DietPi-WiFiDB | Applied WiFi DB slot 1 with SSID ""  [ INFO ] DietPi-WiFiDB | Applied WiFi DB slot 2 with SSID ""  [ INFO ] DietPi-WiFiDB | Applied WiFi DB slot 3 with SSID ""  [ INFO ] DietPi-WiFiDB | Applied WiFi DB slot 4 with SSID ""  [ ] DietPi-WiFiDB | chown root:root /var/lib/dietpi/dietpi-wifi.db /etc/wpa_supplicant/wpa_supplicant.conf.  [ OK ] DietPi-WiFiDB | chown root:root /var/lib/dietpi/dietpi-wifi.db /etc/wpa_supplicant/wpa_supplicant.conf  [ ] DietPi-WiFiDB | chmod 600 /var/lib/dietpi/dietpi-wifi.db /etc/wpa_supplicant/wpa_supplicant.conf.  [ OK ] DietPi-WiFiDB | chmod 600 /var/lib/dietpi/dietpi-wifi.db /etc/wpa_supplicant/wpa_supplicant.conf  [ SUB1 ] DietPi-Set_hardware > wifimodules (enable)  [ ] DietPi-Set_hardware | eval echo 'sprdwl_ng' > /etc/modules-load.d/dietpi-enable_wifi.conf.  [ OK ] DietPi-Set_hardware | eval echo 'sprdwl_ng' > /etc/modules-load.d/dietpi-enable_wifi.conf  [ ] DietPi-Set_hardware | rm /etc/modprobe.d/dietpi-disable_wifi.conf.  [ OK ] DietPi-Set_hardware | rm /etc/modprobe.d/dietpi-disable_wifi.conf  [ INFO ] DietPi-Set_hardware | Please wait, enabling WiFi modules...  [ ] DietPi-Set_hardware | modprobe cfg80211.  [ OK ] DietPi-Set_hardware | modprobe cfg80211  [ ] DietPi-Set_hardware | modprobe sprdwl_ng. [ 131.142840] WCN_ERR: dts node for bt_wake not found ..  ..  .. [ 131.674574] wifi ini path = /lib/firmware/wifi_2355b001_1ant.ini  .[ 131.705746] sprdwl:sprdwl_get_fw_info length mismatch: len_count=83, r_len=89 [1;33m. [ 131.713913] sprdwl:sprdwl_get_fw_info, drv_version=1, fw_version=2, compat_ver=0 [ 131.722593] sprdwl:chip_model:0x2355, chip_ver:0x0 [ 131.727392] sprdwl:fw_ver:0, fw_std:0x7f, fw_capa:0x120f7f [ 131.732885] sprdwl:mac_addr:e0:51:d8:67:1f:92 [ 131.737256] sprdwl:credit_capa:TX_WITH_CREDIT [ 131.741622] sprdwl:ott support:0  [ OK ] DietPi-Set_hardware | modprobe sprdwl_ng  [ INFO ] DietPi-Set_hardware | Checking for required APT packages: iw wireless-tools wpasupplicant wireless-regdb  [ INFO ] DietPi-Set_hardware | APT update, please wait... Ign:1 https://deb.debian.org/debian bookworm InRelease Ign:2 https://download.docker.com/linux/debian bookworm InRelease Ign:3 https://deb.debian.org/debian bookworm-updates InRelease Ign:4 https://deb.debian.org/debian-security bookworm-security InRelease Ign:5 https://deb.debian.org/debian bookworm-backports InRelease Ign:1 https://deb.debian.org/debian bookworm InRelease Ign:2 https://download.docker.com/linux/debian bookworm InRelease Ign:3 https://deb.debian.org/debian bookworm-updates InRelease Ign:4 https://deb.debian.org/debian-security bookworm-security InRelease Ign:5 https://deb.debian.org/debian bookworm-backports InRelease Ign:1 https://deb.debian.org/debian bookworm InRelease Ign:2 https://download.docker.com/linux/debian bookworm InRelease Ign:3 https://deb.debian.org/debian bookworm-updates InRelease Ign:4 https://deb.debian.org/debian-security bookworm-security InRelease Ign:5 https://deb.debian.org/debian bookworm-backports InRelease Err:1 https://deb.debian.org/debian bookworm InRelease Temporary failure resolving 'deb.debian.org' Err:2 https://download.docker.com/linux/debian bookworm InRelease Temporary failure resolving 'download.docker.com' Err:3 https://deb.debian.org/debian bookworm-updates InRelease Temporary failure resolving 'deb.debian.org' Err:4 https://deb.debian.org/debian-security bookworm-security InRelease Temporary failure resolving 'deb.debian.org' Err:5 https://deb.debian.org/debian bookworm-backports InRelease Temporary failure resolving 'deb.debian.org' Reading package lists... E: Failed to fetch https://deb.debian.org/debian/dists/bookworm/InRelease Temporary failure resolving 'deb.debian.org' E: Failed to fetch https://deb.debian.org/debian/dists/bookworm-updates/InRelease Temporary failure resolving 'deb.debian.org' E: Failed to fetch https://deb.debian.org/debian-security/dists/bookworm-security/InRelease Temporary failure resolving 'deb.debian.org' E: Failed to fetch https://deb.debian.org/debian/dists/bookworm-backports/InRelease Temporary failure resolving 'deb.debian.org' E: Failed to fetch https://download.docker.com/linux/debian/dists/bookworm/InRelease Temporary failure resolving 'download.docker.com' E: Some index files failed to download. They have been ignored, or old ones used instead.  [FAILED] DietPi-Set_hardware | APT update - Command: apt-get -y -eany update )0[?25l(BOrange Pi Zero 3 (aarch64) | IP: 172.17.0.1 | Use up/down buttons to scroll text│ APT update │ - Command: apt-get -y -eany update │ - Exit code: 100 │ - DietPi version: v8.25.1 (MichaIng/master) | HW_MODEL: 83 | HW_ARCH: 3 | │ DISTRO: 7 │ - Error log: │ Ign:1 https://deb.debian.org/debian bookworm InRelease │ Ign:2 https://download.docker.com/linux/debian bookworm InRelease │ Ign:3 https://deb.debian.org/debian bookworm-updates InRelease │ Ign:4 https://deb.debian.org/debian-security bookworm-security InRelease │ Ign:5 https://deb.debian.org/debian bookworm-backports InRelease │ Ign:1 https://deb.debian.org/debian bookworm InRelease │ Ign:2 https://download.docker.com/linux/debian bookworm InRelease │ Ign:3 https://deb.debian.org/debian bookworm-updates InRelease │ Ign:4 https://deb.debian.org/debian-security bookworm-security InRelease │ │ Retry : Re-run the last command that failed (B ↑ │ Open subshell : Open a subshell to investigate or solve the issue ▮ │ │ │ ││└──────────────────────────────────────────────────────────────────────────────┘┘─