[ 0.000000] Booting Linux on physical CPU 0x100 [ 0.000000] Linux version 6.1.63-current-odroidxu4 (armbian@next) (arm-linux-gnueabihf-gcc (Ubuntu 11.4.0-1ubuntu1~22.04) 11.4.0, GNU ld (GNU Binutils for Ubuntu) 2.38) #1 SMP PREEMPT Tue Nov 7 20:10:43 UTC 2023 [ 0.000000] CPU: ARMv7 Processor [410fc073] revision 3 (ARMv7), cr=10c5387d [ 0.000000] CPU: div instructions available: patching division code [ 0.000000] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [ 0.000000] OF: fdt: Machine model: Hardkernel ODROID XU4 [ 0.000000] Memory policy: Data cache writealloc [ 0.000000] cma: Reserved 128 MiB at 0xb6800000 [ 0.000000] Samsung CPU ID: 0xe5422001 [ 0.000000] Zone ranges: [ 0.000000] Normal [mem 0x0000000040000000-0x000000006fffffff] [ 0.000000] HighMem [mem 0x0000000070000000-0x00000000be9fffff] [ 0.000000] Movable zone start for each node [ 0.000000] Early memory node ranges [ 0.000000] node 0: [mem 0x0000000040000000-0x00000000be9fffff] [ 0.000000] Initmem setup node 0 [mem 0x0000000040000000-0x00000000be9fffff] [ 0.000000] Running under secure firmware. [ 0.000000] percpu: Embedded 17 pages/cpu s39572 r8192 d21868 u69632 [ 0.000000] pcpu-alloc: s39572 r8192 d21868 u69632 alloc=17*4096 [ 0.000000] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0] 4 [0] 5 [0] 6 [0] 7 [ 0.000000] Built 1 zonelists, mobility grouping on. Total pages: 516928 [ 0.000000] Kernel command line: root=UUID=28df4aa5-7f57-4a7c-9883-f1aebb513bb4 rootfstype=ext4 rootwait ro console=ttySAC2,115200n8 console=tty1 consoleblank=0 net.ifnames=0 smsc95xx.macaddr=00:1e:06:61:7a:72 governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi [ 0.000000] hdmi: using HDMI mode [ 0.000000] Unknown kernel command line parameters "governor=performance hdmi_tx_amp_lvl=31 hdmi_tx_lvl_ch0=3 hdmi_tx_lvl_ch1=3 hdmi_tx_lvl_ch2=3 hdmi_tx_emp_lvl=6 hdmi_clk_amp_lvl=31 hdmi_tx_res=0 HPD=true vout=hdmi", will be passed to user space. [ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes, linear) [ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 0.000000] mem auto-init: stack:off, heap alloc:on, heap free:off [ 0.000000] Memory: 1895512K/2074624K available (12288K kernel code, 1358K rwdata, 3444K rodata, 1024K init, 359K bss, 48040K reserved, 131072K cma-reserved, 1157120K highmem) [ 0.000000] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1 [ 0.000000] trace event string verifier disabled [ 0.000000] rcu: Preemptible hierarchical RCU implementation. [ 0.000000] Trampoline variant of Tasks RCU enabled. [ 0.000000] Tracing variant of Tasks RCU enabled. [ 0.000000] rcu: RCU calculated value of scheduler-enlistment delay is 10 jiffies. [ 0.000000] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [ 0.000000] GIC: Using split EOI/Deactivate mode [ 0.000000] rcu: srcu_init: Setting srcu_struct sizes based on contention. [ 0.000000] Switching to timer-based delay loop, resolution 41ns [ 0.000000] clocksource: mct-frc: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 79635851949 ns [ 0.000002] sched_clock: 32 bits at 24MHz, resolution 41ns, wraps every 89478484971ns [ 0.000029] genirq: irq_chip COMBINER did not update eff. affinity mask of irq 57 [ 0.001504] arch_timer: cp15 timer(s) running at 24.00MHz (phys). [ 0.001526] clocksource: arch_sys_counter: mask: 0xffffffffffffff max_cycles: 0x588fe9dc0, max_idle_ns: 440795202592 ns [ 0.001547] sched_clock: 56 bits at 24MHz, resolution 41ns, wraps every 4398046511097ns [ 0.001563] Ignoring duplicate/late registration of read_current_timer delay [ 0.002351] Console: colour dummy device 80x30 [ 0.003145] printk: console [tty1] enabled [ 0.003208] Calibrating delay loop (skipped), value calculated using timer frequency.. 48.00 BogoMIPS (lpj=240000) [ 0.003256] CPU: Testing write buffer coherency: ok [ 0.003352] pid_max: default: 32768 minimum: 301 [ 0.003503] LSM: Security Framework initializing [ 0.003558] Yama: becoming mindful. [ 0.003797] AppArmor: AppArmor initialized [ 0.003981] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.004033] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes, linear) [ 0.006088] CPU0: thread -1, cpu 0, socket 1, mpidr 80000100 [ 0.007695] cblist_init_generic: Setting adjustable number of callback queues. [ 0.007742] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.007955] cblist_init_generic: Setting adjustable number of callback queues. [ 0.007990] cblist_init_generic: Setting shift to 3 and lim to 1. [ 0.008270] Setting up static identity map for 0x40100000 - 0x40100060 [ 0.008616] ARM CCI driver probed [ 0.009210] Exynos MCPM support installed [ 0.009656] rcu: Hierarchical SRCU implementation. [ 0.009682] rcu: Max phase no-delay instances is 1000. [ 0.011772] smp: Bringing up secondary CPUs ... [ 0.013155] CPU1: thread -1, cpu 1, socket 1, mpidr 80000101 [ 0.014649] CPU2: thread -1, cpu 2, socket 1, mpidr 80000102 [ 0.016025] CPU3: thread -1, cpu 3, socket 1, mpidr 80000103 [ 0.017504] CPU4: thread -1, cpu 0, socket 0, mpidr 80000000 [ 0.017521] CPU4: detected I-Cache line size mismatch, workaround enabled [ 0.017530] CPU4: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.017621] CPU4: Spectre BHB: enabling loop workaround for all CPUs [ 0.019104] CPU5: thread -1, cpu 1, socket 0, mpidr 80000001 [ 0.019118] CPU5: detected I-Cache line size mismatch, workaround enabled [ 0.019125] CPU5: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.020864] CPU6: thread -1, cpu 2, socket 0, mpidr 80000002 [ 0.020878] CPU6: detected I-Cache line size mismatch, workaround enabled [ 0.020886] CPU6: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.022374] CPU7: thread -1, cpu 3, socket 0, mpidr 80000003 [ 0.022388] CPU7: detected I-Cache line size mismatch, workaround enabled [ 0.022396] CPU7: Spectre v2: firmware did not set auxiliary control register IBE bit, system vulnerable [ 0.022644] smp: Brought up 1 node, 8 CPUs [ 0.022709] SMP: Total of 8 processors activated (384.00 BogoMIPS). [ 0.022738] CPU: All CPU(s) started in HYP mode. [ 0.022758] CPU: Virtualization extensions available. [ 0.024389] devtmpfs: initialized [ 0.046692] VFP support v0.3: implementor 41 architecture 4 part 30 variant f rev 0 [ 0.046968] clocksource: jiffies: mask: 0xffffffff max_cycles: 0xffffffff, max_idle_ns: 19112604462750000 ns [ 0.047048] futex hash table entries: 2048 (order: 5, 131072 bytes, linear) [ 0.049845] pinctrl core: initialized pinctrl subsystem [ 0.052784] NET: Registered PF_NETLINK/PF_ROUTE protocol family [ 0.060927] DMA: preallocated 2048 KiB pool for atomic coherent allocations [ 0.062614] audit: initializing netlink subsys (disabled) [ 0.062925] audit: type=2000 audit(0.060:1): state=initialized audit_enabled=0 res=1 [ 0.063527] thermal_sys: Registered thermal governor 'step_wise' [ 0.063821] cpuidle: using governor menu [ 0.064633] hw-breakpoint: found 5 (+1 reserved) breakpoint and 4 watchpoint registers. [ 0.064664] hw-breakpoint: maximum watchpoint size is 8 bytes. [ 0.179011] EXYNOS5420 PMU initialized [ 0.407637] kprobes: kprobe jump-optimization is enabled. All kprobes are optimized if possible. [ 0.409432] cryptd: max_cpu_qlen set to 1000 [ 0.579969] raid6: neonx8 gen() 1465 MB/s [ 0.749956] raid6: neonx4 gen() 2093 MB/s [ 0.919963] raid6: neonx2 gen() 1873 MB/s [ 1.089965] raid6: neonx1 gen() 1516 MB/s [ 1.260027] raid6: int32x8 gen() 446 MB/s [ 1.429978] raid6: int32x4 gen() 528 MB/s [ 1.599974] raid6: int32x2 gen() 461 MB/s [ 1.769968] raid6: int32x1 gen() 440 MB/s [ 1.769988] raid6: using algorithm neonx4 gen() 2093 MB/s [ 1.939966] raid6: .... xor() 1389 MB/s, rmw enabled [ 1.939988] raid6: using neon recovery algorithm [ 1.942070] iommu: Default domain type: Translated [ 1.942094] iommu: DMA domain TLB invalidation policy: strict mode [ 1.942519] usbcore: registered new interface driver usbfs [ 1.942595] usbcore: registered new interface driver hub [ 1.942664] usbcore: registered new device driver usb [ 1.943384] s3c-i2c 12c80000.i2c: slave address 0x00 [ 1.943415] s3c-i2c 12c80000.i2c: bus frequency set to 65 KHz [ 1.943757] s3c-i2c 12c80000.i2c: i2c-2: S3C I2C adapter [ 1.944243] mc: Linux media interface: v0.10 [ 1.944323] videodev: Linux video capture interface: v2.00 [ 1.944894] Advanced Linux Sound Architecture Driver Initialized. [ 1.945551] NetLabel: Initializing [ 1.945572] NetLabel: domain hash size = 128 [ 1.945591] NetLabel: protocols = UNLABELED CIPSOv4 CALIPSO [ 1.945692] NetLabel: unlabeled traffic allowed by default [ 1.946443] clocksource: Switched to clocksource mct-frc [ 2.013130] VFS: Disk quotas dquot_6.6.0 [ 2.013233] VFS: Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 2.014185] AppArmor: AppArmor Filesystem Enabled [ 2.029849] NET: Registered PF_INET protocol family [ 2.030129] IP idents hash table entries: 16384 (order: 5, 131072 bytes, linear) [ 2.032153] tcp_listen_portaddr_hash hash table entries: 512 (order: 0, 4096 bytes, linear) [ 2.032302] Table-perturb hash table entries: 65536 (order: 6, 262144 bytes, linear) [ 2.032430] TCP established hash table entries: 8192 (order: 3, 32768 bytes, linear) [ 2.032570] TCP bind hash table entries: 8192 (order: 5, 131072 bytes, linear) [ 2.032874] TCP: Hash tables configured (established 8192 bind 8192) [ 2.033019] UDP hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.033086] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes, linear) [ 2.033350] NET: Registered PF_UNIX/PF_LOCAL protocol family [ 2.033715] Trying to unpack rootfs image as initramfs... [ 2.035730] hw perfevents: enabled with armv7_cortex_a7 PMU driver, 5 counters available [ 2.037038] hw perfevents: enabled with armv7_cortex_a15 PMU driver, 7 counters available [ 2.039202] Initialise system trusted keyrings [ 2.039295] Key type blacklist registered [ 2.039655] workingset: timestamp_bits=14 max_order=19 bucket_order=5 [ 2.049304] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 2.050551] fuse: init (API version 7.37) [ 2.052345] integrity: Platform Keyring initialized [ 2.138011] xor: measuring software checksum speed [ 2.143970] arm4regs : 1661 MB/sec [ 2.151443] 8regs : 1332 MB/sec [ 2.158887] 32regs : 1337 MB/sec [ 2.162872] neon : 2509 MB/sec [ 2.162890] xor: using function: neon (2509 MB/sec) [ 2.162925] Key type asymmetric registered [ 2.162945] Asymmetric key parser 'x509' registered [ 2.602535] Freeing initrd memory: 8964K [ 2.642555] alg: self-tests for CTR-KDF (hmac(sha256)) passed [ 2.642910] bounce: pool size: 64 pages [ 2.643083] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 248) [ 2.643377] io scheduler mq-deadline registered [ 2.643402] io scheduler kyber registered [ 2.643647] io scheduler bfq registered [ 2.645639] samsung-pinctrl 13400000.pinctrl: Failed to create device link (0x180) with soc [ 2.648015] samsung-usb2-phy 12130000.phy: supply vbus not found, using dummy regulator [ 2.649037] exynos5_usb3drd_phy 12100000.phy: supply vbus not found, using dummy regulator [ 2.649219] exynos5_usb3drd_phy 12100000.phy: supply vbus-boost not found, using dummy regulator [ 2.649639] exynos5_usb3drd_phy 12500000.phy: supply vbus not found, using dummy regulator [ 2.649824] exynos5_usb3drd_phy 12500000.phy: supply vbus-boost not found, using dummy regulator [ 2.660624] dma-pl330 3880000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.660661] dma-pl330 3880000.dma-controller: DBUFF-4x8bytes Num_Chans-6 Num_Peri-16 Num_Events-6 [ 2.663749] dma-pl330 121a0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.663782] dma-pl330 121a0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.666853] dma-pl330 121b0000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.666886] dma-pl330 121b0000.dma-controller: DBUFF-32x4bytes Num_Chans-8 Num_Peri-32 Num_Events-32 [ 2.668037] dma-pl330 10800000.dma-controller: Loaded driver for PL330 DMAC-241330 [ 2.668068] dma-pl330 10800000.dma-controller: DBUFF-64x8bytes Num_Chans-8 Num_Peri-1 Num_Events-32 [ 2.685757] dma-pl330 3880000.dma-controller: PM domain MAU will not be powered off [ 2.757482] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled [ 2.760036] 12c20000.serial: ttySAC2 at MMIO 0x12c20000 (irq = 123, base_baud = 0) is a S3C6400/10 [ 3.903652] printk: console [ttySAC2] enabled [ 3.910158] exynos-trng 10830600.rng: Exynos True Random Number Generator. [ 3.917265] exynos-mixer 14450000.mixer: Adding to iommu group 0 [ 3.944196] brd: module loaded [ 3.947340] usbcore: registered new interface driver r8152 [ 3.951403] usbcore: registered new interface driver cdc_ether [ 3.957239] usbcore: registered new interface driver cdc_subset [ 3.963114] usbcore: registered new interface driver r8153_ecm [ 3.971718] phy phy-12130000.phy.6: phy_power_on was called before phy_init [ 3.977249] exynos-ehci 12110000.usb: EHCI Host Controller [ 3.982688] exynos-ehci 12110000.usb: new USB bus registered, assigned bus number 1 [ 3.990830] exynos-ehci 12110000.usb: irq 124, io mem 0x12110000 [ 4.016499] exynos-ehci 12110000.usb: USB 2.0 started, EHCI 1.00 [ 4.021358] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 4.029324] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.036505] usb usb1: Product: EHCI Host Controller [ 4.041325] usb usb1: Manufacturer: Linux 6.1.63-current-odroidxu4 ehci_hcd [ 4.048290] usb usb1: SerialNumber: 12110000.usb [ 4.053594] hub 1-0:1.0: USB hub found [ 4.056655] hub 1-0:1.0: 3 ports detected [ 4.061890] phy phy-12130000.phy.6: phy_power_on was called before phy_init [ 4.067532] exynos-ohci 12120000.usb: USB Host Controller [ 4.072883] exynos-ohci 12120000.usb: new USB bus registered, assigned bus number 2 [ 4.080721] exynos-ohci 12120000.usb: irq 124, io mem 0x12120000 [ 4.160764] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001, bcdDevice= 6.01 [ 4.167609] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 4.174755] usb usb2: Product: USB Host Controller [ 4.179556] usb usb2: Manufacturer: Linux 6.1.63-current-odroidxu4 ohci_hcd [ 4.186484] usb usb2: SerialNumber: 12120000.usb [ 4.191718] hub 2-0:1.0: USB hub found [ 4.194812] hub 2-0:1.0: 3 ports detected [ 4.201265] mousedev: PS/2 mouse device common for all mice [ 4.207079] i2c_dev: i2c /dev entries driver [ 4.238921] vdd_ldo9: Bringing 3300000uV into 3000000-3000000uV [ 4.258469] vddq_mmc2: Bringing 3300000uV into 2800000-2800000uV [ 4.282322] vdd_sd: Bringing 3300000uV into 2800000-2800000uV [ 4.378328] s5m-rtc s2mps14-rtc: registered as rtc0 [ 4.383589] s5m-rtc s2mps14-rtc: setting system clock to 2000-01-01T00:00:14 UTC (946684814) [ 4.390937] s2mps11-clk s2mps11-clk: DMA mask not set [ 4.404866] exynos-tmu 10060000.tmu: More trip points than supported by this TMU. [ 4.410933] exynos-tmu 10060000.tmu: 2 trip points should be configured in polling mode. [ 4.420785] exynos-tmu 10064000.tmu: More trip points than supported by this TMU. [ 4.426851] exynos-tmu 10064000.tmu: 2 trip points should be configured in polling mode. [ 4.436717] exynos-tmu 10068000.tmu: More trip points than supported by this TMU. [ 4.442734] exynos-tmu 10068000.tmu: 2 trip points should be configured in polling mode. [ 4.452679] exynos-tmu 1006c000.tmu: More trip points than supported by this TMU. [ 4.458811] exynos-tmu 1006c000.tmu: 2 trip points should be configured in polling mode. [ 4.468578] exynos-tmu 100a0000.tmu: More trip points than supported by this TMU. [ 4.474596] exynos-tmu 100a0000.tmu: 6 trip points should be configured in polling mode. [ 4.483922] s3c2410-wdt 101d0000.watchdog: watchdog inactive, reset disabled, irq disabled [ 4.491646] device-mapper: uevent: version 1.0.3 [ 4.495915] device-mapper: ioctl: 4.47.0-ioctl (2022-07-28) initialised: dm-devel@redhat.com [ 4.519577] sdhci: Secure Digital Host Controller Interface driver [ 4.524292] sdhci: Copyright(c) Pierre Ossman [ 4.529185] Synopsys Designware Multimedia Card Interface Driver [ 4.536390] dwmmc_exynos 12220000.mmc: IDMAC supports 32-bit address mode. [ 4.537662] dwmmc_exynos 12200000.mmc: IDMAC supports 32-bit address mode. [ 4.543452] s5p-secss 10830000.sss: s5p-sss driver registered [ 4.549614] dwmmc_exynos 12220000.mmc: Using internal DMA controller. [ 4.556347] hid: raw HID events driver (C) Jiri Kosina [ 4.560819] dwmmc_exynos 12220000.mmc: Version ID is 250a [ 4.561193] dwmmc_exynos 12200000.mmc: Using internal DMA controller. [ 4.561240] dwmmc_exynos 12200000.mmc: Version ID is 250a [ 4.561470] dwmmc_exynos 12200000.mmc: DW MMC controller at irq 135,64 bit host data width,64 deep fifo [ 4.563074] dwmmc_exynos 12200000.mmc: allocated mmc-pwrseq [ 4.586680] mmc_host mmc0: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 4.592504] dwmmc_exynos 12220000.mmc: DW MMC controller at irq 134,64 bit host data width,64 deep fifo [ 4.617315] exynos-nocp: new NoC Probe device registered: 10ca1000.nocp [ 4.623519] exynos-nocp: new NoC Probe device registered: 10ca1400.nocp [ 4.630089] exynos-nocp: new NoC Probe device registered: 10ca1800.nocp [ 4.636671] exynos-nocp: new NoC Probe device registered: 10ca1c00.nocp [ 4.637106] mmc_host mmc1: Bus speed (slot 0) = 50000000Hz (slot req 400000Hz, actual 396825HZ div = 63) [ 4.645299] exynos-ppmu: new PPMU device registered 10d00000.ppmu (ppmu-event3-dmc0-0) [ 4.660939] exynos-ppmu: new PPMU device registered 10d10000.ppmu (ppmu-event3-dmc0-1) [ 4.668516] exynos-ppmu: new PPMU device registered 10d60000.ppmu (ppmu-event3-dmc1-0) [ 4.676375] exynos-ppmu: new PPMU device registered 10d70000.ppmu (ppmu-event3-dmc1-1) [ 4.686532] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_0 not found [ 4.692972] exynos5-dmc 10c20000.memory-controller: error -ENXIO: IRQ drex_1 not found [ 4.701121] exynos5-dmc 10c20000.memory-controller: DMC initialized, in irq mode: 0 [ 4.713994] samsung-i2s 3830000.i2s-sec: DMA channels sourced from device 3830000.i2s [ 4.722158] NET: Registered PF_PACKET protocol family [ 4.725744] NET: Registered PF_KEY protocol family [ 4.728045] mmc_host mmc1: Bus speed (slot 0) = 200000000Hz (slot req 200000000Hz, actual 200000000HZ div = 0) [ 4.730587] Key type dns_resolver registered [ 4.736589] usb 2-1: new low-speed USB device number 2 using exynos-ohci [ 4.751956] Registering SWP/SWPB emulation handler [ 4.756752] registered taskstats version 1 [ 4.760242] Loading compiled-in X.509 certificates [ 4.765464] Key type .fscrypt registered [ 4.768950] Key type fscrypt-provisioning registered [ 4.777508] Btrfs loaded, crc32c=crc32c-generic, zoned=yes, fsverity=yes [ 4.850483] mmc1: new ultra high speed SDR104 SDXC card at address 0001 [ 4.850771] Key type encrypted registered [ 4.859961] AppArmor: AppArmor sha1 policy hashing enabled [ 4.861908] mmcblk1: mmc1:0001 SD256 118 GiB [ 4.883343] mmcblk1: p1 p2 [ 4.990695] exynos-chipid 10000000.chipid: cpu0 opp0, freq: 1500 missing [ 4.996180] exynos-chipid 10000000.chipid: cpu4 opp0, freq: 2100 missing [ 5.003197] exynos-chipid 10000000.chipid: Exynos: CPU[EXYNOS5800] PRO_ID[0xe5422000] REV[0x1] Detected [ 5.021087] OF: graph: no port node found in /soc/hdmi@14530000 [ 5.025617] usb 2-1: New USB device found, idVendor=413c, idProduct=2113, bcdDevice= 1.08 [ 5.027902] [drm] Exynos DRM: using 14450000.mixer device for DMA mapping operations [ 5.033781] usb 2-1: New USB device strings: Mfr=0, Product=2, SerialNumber=0 [ 5.041559] exynos-drm exynos-drm: bound 14450000.mixer (ops 0xc0dc035c) [ 5.048591] usb 2-1: Product: Dell KB216 Wired Keyboard [ 5.048685] exynos-drm exynos-drm: bound 14530000.hdmi (ops 0xc0dc093c) [ 5.300875] Console: switching to colour frame buffer device 210x65 [ 5.328148] exynos-drm exynos-drm: [drm] fb0: exynosdrmfb frame buffer device [ 5.336390] [drm] Initialized exynos 1.1.0 20180330 for exynos-drm on minor 0 [ 5.417852] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 5.422093] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 3 [ 5.433075] xhci-hcd xhci-hcd.8.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 5.441688] xhci-hcd xhci-hcd.8.auto: irq 140, io mem 0x12000000 [ 5.447553] xhci-hcd xhci-hcd.8.auto: xHCI Host Controller [ 5.452714] xhci-hcd xhci-hcd.8.auto: new USB bus registered, assigned bus number 4 [ 5.460432] xhci-hcd xhci-hcd.8.auto: Host supports USB 3.0 SuperSpeed [ 5.467160] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.475094] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.482321] usb usb3: Product: xHCI Host Controller [ 5.487171] usb usb3: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd [ 5.494081] usb usb3: SerialNumber: xhci-hcd.8.auto [ 5.500138] hub 3-0:1.0: USB hub found [ 5.502687] hub 3-0:1.0: 1 port detected [ 5.507196] usb usb4: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.514782] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 5.522863] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.530078] usb usb4: Product: xHCI Host Controller [ 5.534885] usb usb4: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd [ 5.541992] usb usb4: SerialNumber: xhci-hcd.8.auto [ 5.547822] hub 4-0:1.0: USB hub found [ 5.550406] hub 4-0:1.0: 1 port detected [ 5.628729] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 5.633073] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 5 [ 5.643817] xhci-hcd xhci-hcd.9.auto: hcc params 0x0220f04c hci version 0x100 quirks 0x0000000002010010 [ 5.652533] xhci-hcd xhci-hcd.9.auto: irq 141, io mem 0x12400000 [ 5.659707] xhci-hcd xhci-hcd.9.auto: xHCI Host Controller [ 5.663978] xhci-hcd xhci-hcd.9.auto: new USB bus registered, assigned bus number 6 [ 5.671843] xhci-hcd xhci-hcd.9.auto: Host supports USB 3.0 SuperSpeed [ 5.678664] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002, bcdDevice= 6.01 [ 5.687128] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.694484] usb usb5: Product: xHCI Host Controller [ 5.699513] usb usb5: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd [ 5.706658] usb usb5: SerialNumber: xhci-hcd.9.auto [ 5.712605] hub 5-0:1.0: USB hub found [ 5.716559] hub 5-0:1.0: 1 port detected [ 5.720942] usb usb6: We don't know the algorithms for LPM for this host, disabling LPM. [ 5.729343] usb usb6: New USB device found, idVendor=1d6b, idProduct=0003, bcdDevice= 6.01 [ 5.737825] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 5.745194] usb usb6: Product: xHCI Host Controller [ 5.750287] usb usb6: Manufacturer: Linux 6.1.63-current-odroidxu4 xhci-hcd [ 5.757481] usb usb6: SerialNumber: xhci-hcd.9.auto [ 5.763356] hub 6-0:1.0: USB hub found [ 5.767384] hub 6-0:1.0: 1 port detected [ 5.772752] s3c-rtc 101e0000.rtc: rtc disabled, re-enabling [ 5.779225] s3c-rtc 101e0000.rtc: registered as rtc1 [ 5.788179] exynos-bus: new bus device registered: soc:bus-wcore ( 88700 KHz ~ 532000 KHz) [ 5.797355] exynos-bus: new bus device registered: soc:bus-noc ( 66600 KHz ~ 111000 KHz) [ 5.806068] exynos-bus: new bus device registered: soc:bus-fsys-apb (111000 KHz ~ 222000 KHz) [ 5.806478] usb 3-1: new high-speed USB device number 2 using xhci-hcd [ 5.808418] exynos-bus: new bus device registered: soc:bus-fsys2 ( 75000 KHz ~ 200000 KHz) [ 5.833890] exynos-bus: new bus device registered: soc:bus-mfc ( 83250 KHz ~ 333000 KHz) [ 5.842966] exynos-bus: new bus device registered: soc:bus-gen ( 88700 KHz ~ 266000 KHz) [ 5.851742] exynos-bus: new bus device registered: soc:bus-peri ( 66600 KHz ~ 66600 KHz) [ 5.861181] exynos-bus: new bus device registered: soc:bus-g2d ( 83250 KHz ~ 333000 KHz) [ 5.870154] exynos-bus: new bus device registered: soc:bus-g2d-acp ( 66500 KHz ~ 266000 KHz) [ 5.879514] exynos-bus: new bus device registered: soc:bus-jpeg ( 75000 KHz ~ 300000 KHz) [ 5.888561] exynos-bus: new bus device registered: soc:bus-jpeg-apb ( 83250 KHz ~ 166500 KHz) [ 5.897655] exynos-bus: new bus device registered: soc:bus-disp1-fimd (120000 KHz ~ 200000 KHz) [ 5.906932] exynos-bus: new bus device registered: soc:bus-disp1 (120000 KHz ~ 300000 KHz) [ 5.915740] exynos-bus: new bus device registered: soc:bus-gscl-scaler (150000 KHz ~ 300000 KHz) [ 5.925223] exynos-bus: new bus device registered: soc:bus-mscl ( 84000 KHz ~ 666000 KHz) [ 5.997951] ALSA device list: [ 6.002488] #0: ODROID-XU4 [ 6.011190] Freeing unused kernel image (initmem) memory: 1024K [ 6.027866] usb 3-1: New USB device found, idVendor=05e3, idProduct=0610, bcdDevice=22.23 [ 6.043664] usb 3-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.058291] usb 3-1: Product: USB2.0 Hub [ 6.062288] usb 3-1: Manufacturer: GenesysLogic [ 6.087559] Run /init as init process [ 6.102070] with arguments: [ 6.102098] /init [ 6.102119] with environment: [ 6.102137] HOME=/ [ 6.102155] TERM=linux [ 6.102172] governor=performance [ 6.102189] hdmi_tx_amp_lvl=31 [ 6.102206] hdmi_tx_lvl_ch0=3 [ 6.102278] hdmi_tx_lvl_ch1=3 [ 6.102297] hdmi_tx_lvl_ch2=3 [ 6.102314] hdmi_tx_emp_lvl=6 [ 6.102331] hdmi_clk_amp_lvl=31 [ 6.102347] hdmi_tx_res=0 [ 6.102363] HPD=true [ 6.102380] vout=hdmi [ 6.107934] hub 3-1:1.0: USB hub found [ 6.115358] hub 3-1:1.0: 2 ports detected [ 6.176667] usb 4-1: new SuperSpeed USB device number 2 using xhci-hcd [ 6.220761] usb 4-1: New USB device found, idVendor=05e3, idProduct=0616, bcdDevice=22.23 [ 6.233539] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 6.245939] usb 4-1: Product: USB3.0 Hub [ 6.245968] usb 4-1: Manufacturer: GenesysLogic [ 6.267538] hub 4-1:1.0: USB hub found [ 6.271781] hub 4-1:1.0: 2 ports detected [ 6.597351] usb 4-1.1: new SuperSpeed USB device number 3 using xhci-hcd [ 6.627934] usb 4-1.1: New USB device found, idVendor=1058, idProduct=25a3, bcdDevice=10.19 [ 6.636294] usb 4-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.643600] usb 4-1.1: Product: Elements 25A3 [ 6.648725] usb 4-1.1: Manufacturer: Western Digital [ 6.653764] usb 4-1.1: SerialNumber: 574343374B33535552374450 [ 6.701059] SCSI subsystem initialized [ 6.709373] usb-storage 4-1.1:1.0: USB Mass Storage device detected [ 6.718089] scsi host0: usb-storage 4-1.1:1.0 [ 6.724246] usbcore: registered new interface driver usb-storage [ 6.733734] usbcore: registered new interface driver uas [ 6.756596] usb 4-1.2: new SuperSpeed USB device number 4 using xhci-hcd [ 6.789111] usb 4-1.2: New USB device found, idVendor=0781, idProduct=5595, bcdDevice= 1.00 [ 6.797600] usb 4-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 6.804949] usb 4-1.2: Product: SanDisk 3.2Gen1 [ 6.809603] usb 4-1.2: Manufacturer: USB [ 6.813596] usb 4-1.2: SerialNumber: 0101afb8c732d4713dc835eee969d7b71da177ece8f9c7501222066ccee7953b2ee3000000000000000000002ff1d9e7ff1f2b00955581079428103a [ 6.829678] usb-storage 4-1.2:1.0: USB Mass Storage device detected [ 6.836680] usb 6-1: new SuperSpeed USB device number 2 using xhci-hcd [ 6.843788] scsi host1: usb-storage 4-1.2:1.0 [ 6.868000] usb 6-1: New USB device found, idVendor=0bda, idProduct=8153, bcdDevice=30.00 [ 6.876310] usb 6-1: New USB device strings: Mfr=1, Product=2, SerialNumber=6 [ 6.883553] usb 6-1: Product: USB 10/100/1000 LAN [ 6.888459] usb 6-1: Manufacturer: Realtek [ 6.892660] usb 6-1: SerialNumber: 000001000000 [ 7.081487] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 7.134936] usb 6-1: reset SuperSpeed USB device number 2 using xhci-hcd [ 7.215533] r8152 6-1:1.0: load rtl8153a-3 v2 02/07/20 successfully [ 7.296653] r8152 6-1:1.0 eth0: v1.12.13 [ 7.392294] input: Dell KB216 Wired Keyboard as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.0/0003:413C:2113.0001/input/input1 [ 7.477412] hid-generic 0003:413C:2113.0001: input,hidraw0: USB HID v1.11 Keyboard [Dell KB216 Wired Keyboard] on usb-12120000.usb-1/input0 [ 7.512691] input: Dell KB216 Wired Keyboard System Control as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.1/0003:413C:2113.0002/input/input2 [ 7.596574] input: Dell KB216 Wired Keyboard Consumer Control as /devices/platform/soc/12120000.usb/usb2/2-1/2-1:1.1/0003:413C:2113.0002/input/input3 [ 7.610406] hid-generic 0003:413C:2113.0002: input,hidraw1: USB HID v1.11 Device [Dell KB216 Wired Keyboard] on usb-12120000.usb-1/input1 [ 7.623263] usbcore: registered new interface driver usbhid [ 7.629191] usbhid: USB HID core driver [ 7.757692] scsi 0:0:0:0: Direct-Access WD Elements 25A3 1019 PQ: 0 ANSI: 6 [ 7.823462] I/O error, dev mmcblk1, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 7.827934] sd 0:0:0:0: [sda] Spinning up disk... [ 7.840965] I/O error, dev mmcblk1, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 7.872864] EXT4-fs (mmcblk1p1): mounted filesystem with ordered data mode. Quota mode: none. [ 7.930600] scsi 1:0:0:0: Direct-Access USB SanDisk 3.2Gen1 1.00 PQ: 0 ANSI: 6 [ 7.941383] sd 1:0:0:0: [sdb] 240353280 512-byte logical blocks: (123 GB/115 GiB) [ 7.953437] sd 1:0:0:0: [sdb] Write Protect is off [ 7.963042] sd 1:0:0:0: [sdb] Mode Sense: 43 00 00 00 [ 7.963629] sd 1:0:0:0: [sdb] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA [ 7.984485] sdb: sdb1 [ 7.990291] sd 1:0:0:0: [sdb] Attached SCSI removable disk [ 8.289303] systemd[1]: System time before build time, advancing clock. [ 8.876664] ..........ready [ 18.263330] sd 0:0:0:0: [sda] Very big device. Trying to use READ CAPACITY(16). [ 18.273446] sd 0:0:0:0: [sda] 7813969920 512-byte logical blocks: (4.00 TB/3.64 TiB) [ 18.283578] sd 0:0:0:0: [sda] 4096-byte physical blocks [ 18.292063] sd 0:0:0:0: [sda] Write Protect is off [ 18.299332] sd 0:0:0:0: [sda] Mode Sense: 47 00 10 08 [ 18.300133] sd 0:0:0:0: [sda] No Caching mode page found [ 18.307917] sd 0:0:0:0: [sda] Assuming drive cache: write through [ 18.382574] sda: sda1 sda2 [ 18.393558] sd 0:0:0:0: [sda] Attached SCSI disk [ 18.405785] systemd[1]: Inserted module 'autofs4' [ 18.458075] NET: Registered PF_INET6 protocol family [ 18.468684] Segment Routing with IPv6 [ 18.475218] In-situ OAM (IOAM) with IPv6 [ 18.550736] systemd[1]: systemd 252.19-1~deb12u1 running in system mode (+PAM +AUDIT +SELINUX +APPARMOR +IMA +SMACK +SECCOMP +GCRYPT -GNUTLS +OPENSSL +ACL +BLKID +CURL +ELFUTILS +FIDO2 +IDN2 -IDN +IPTC +KMOD +LIBCRYPTSETUP +LIBFDISK +PCRE2 -PWQUALITY +P11KIT +QRENCODE +TPM2 +BZIP2 +LZ4 +XZ +ZLIB +ZSTD -BPF_FRAMEWORK -XKBCOMMON +UTMP +SYSVINIT default-hierarchy=unified) [ 18.592378] systemd[1]: Detected architecture arm. [ 18.630240] systemd[1]: Hostname set to . [ 18.835841] I/O error, dev mmcblk1, sector 0 op 0x1:(WRITE) flags 0x800 phys_seg 0 prio class 2 [ 19.247692] systemd[1]: Queued start job for default target graphical.target. [ 19.319814] systemd[1]: Created slice system-getty.slice - Slice /system/getty. [ 19.340701] systemd[1]: Created slice system-modprobe.slice - Slice /system/modprobe. [ 19.352739] systemd[1]: Created slice system-serial\x2dgetty.slice - Slice /system/serial-getty. [ 19.364956] systemd[1]: Started systemd-ask-password-console.path - Dispatch Password Requests to Console Directory Watch. [ 19.379468] systemd[1]: Started systemd-ask-password-wall.path - Forward Password Requests to Wall Directory Watch. [ 19.393618] systemd[1]: Set up automount proc-sys-fs-binfmt_misc.automount - Arbitrary Executable File Formats File System Automount Point. [ 19.409483] systemd[1]: Reached target cryptsetup.target - Local Encrypted Volumes. [ 19.420374] systemd[1]: Reached target integritysetup.target - Local Integrity Protected Volumes. [ 19.432619] systemd[1]: Reached target paths.target - Path Units. [ 19.442042] systemd[1]: Reached target remote-fs.target - Remote File Systems. [ 19.452544] systemd[1]: Reached target slices.target - Slice Units. [ 19.462065] systemd[1]: Reached target veritysetup.target - Local Verity Protected Volumes. [ 19.473991] systemd[1]: Listening on systemd-fsckd.socket - fsck to fsckd communication Socket. [ 19.486143] systemd[1]: Listening on systemd-initctl.socket - initctl Compatibility Named Pipe. [ 19.499424] systemd[1]: Listening on systemd-journald-audit.socket - Journal Audit Socket. [ 19.511533] systemd[1]: Listening on systemd-journald-dev-log.socket - Journal Socket (/dev/log). [ 19.524265] systemd[1]: Listening on systemd-journald.socket - Journal Socket. [ 19.536532] systemd[1]: Listening on systemd-udevd-control.socket - udev Control Socket. [ 19.549389] systemd[1]: Listening on systemd-udevd-kernel.socket - udev Kernel Socket. [ 19.561705] systemd[1]: Reached target sockets.target - Socket Units. [ 19.572723] systemd[1]: dev-hugepages.mount - Huge Pages File System was skipped because of an unmet condition check (ConditionPathExists=/sys/kernel/mm/hugepages). [ 19.648432] systemd[1]: Mounting dev-mqueue.mount - POSIX Message Queue File System... [ 19.678077] systemd[1]: Mounting sys-kernel-debug.mount - Kernel Debug File System... [ 19.693789] systemd[1]: Mounting sys-kernel-tracing.mount - Kernel Trace File System... [ 19.710600] systemd[1]: Starting fake-hwclock.service - Restore / save the current clock... [ 19.726750] systemd[1]: Starting keyboard-setup.service - Set the console keyboard layout... [ 19.743600] systemd[1]: Starting kmod-static-nodes.service - Create List of Static Device Nodes... [ 19.760973] systemd[1]: Starting modprobe@configfs.service - Load Kernel Module configfs... [ 19.777569] systemd[1]: Starting modprobe@dm_mod.service - Load Kernel Module dm_mod... [ 19.793369] systemd[1]: Starting modprobe@efi_pstore.service - Load Kernel Module efi_pstore... [ 19.810544] systemd[1]: Starting modprobe@fuse.service - Load Kernel Module fuse... [ 19.826075] systemd[1]: Starting modprobe@loop.service - Load Kernel Module loop... [ 19.838600] systemd[1]: systemd-fsck-root.service - File System Check on Root Device was skipped because of an unmet condition check (ConditionPathExists=!/run/initramfs/fsck-root). [ 19.862679] systemd[1]: Starting systemd-journald.service - Journal Service... [ 19.863419] loop: module loaded [ 19.885378] systemd[1]: Starting systemd-modules-load.service - Load Kernel Modules... [ 19.901381] systemd[1]: Starting systemd-remount-fs.service - Remount Root and Kernel File Systems... [ 19.918811] systemd[1]: Starting systemd-udev-trigger.service - Coldplug All udev Devices... [ 19.937823] systemd[1]: Mounted dev-mqueue.mount - POSIX Message Queue File System. [ 19.951163] systemd[1]: Mounted sys-kernel-debug.mount - Kernel Debug File System. [ 19.963491] systemd[1]: Mounted sys-kernel-tracing.mount - Kernel Trace File System. [ 19.969606] I/O error, dev mmcblk1, sector 8192 op 0x1:(WRITE) flags 0x800 phys_seg 1 prio class 2 [ 19.984511] Buffer I/O error on dev mmcblk1p1, logical block 0, lost sync page write [ 19.995941] EXT4-fs (mmcblk1p1): I/O error while writing superblock [ 20.015385] systemd[1]: Finished fake-hwclock.service - Restore / save the current clock. [ 20.031630] systemd[1]: Finished keyboard-setup.service - Set the console keyboard layout. [ 20.045258] systemd[1]: Finished kmod-static-nodes.service - Create List of Static Device Nodes. [ 20.059966] systemd[1]: modprobe@configfs.service: Deactivated successfully. [ 20.069112] systemd[1]: Finished modprobe@configfs.service - Load Kernel Module configfs. [ 20.082961] systemd[1]: modprobe@dm_mod.service: Deactivated successfully. [ 20.092244] systemd[1]: Finished modprobe@dm_mod.service - Load Kernel Module dm_mod. [ 20.105607] systemd[1]: modprobe@efi_pstore.service: Deactivated successfully. [ 20.114942] systemd[1]: Finished modprobe@efi_pstore.service - Load Kernel Module efi_pstore. [ 20.129070] systemd[1]: modprobe@fuse.service: Deactivated successfully. [ 20.138612] systemd[1]: Finished modprobe@fuse.service - Load Kernel Module fuse. [ 20.151676] systemd[1]: modprobe@loop.service: Deactivated successfully. [ 20.160399] systemd[1]: Finished modprobe@loop.service - Load Kernel Module loop. [ 20.173030] systemd[1]: Finished systemd-modules-load.service - Load Kernel Modules. [ 20.185803] systemd[1]: systemd-remount-fs.service: Main process exited, code=exited, status=1/FAILURE [ 20.197198] systemd[1]: systemd-remount-fs.service: Failed with result 'exit-code'. [ 20.206979] systemd[1]: Failed to start systemd-remount-fs.service - Remount Root and Kernel File Systems. [ 20.317225] systemd[1]: Mounting sys-fs-fuse-connections.mount - FUSE Control File System... [ 20.334046] systemd[1]: Mounting sys-kernel-config.mount - Kernel Configuration File System... [ 20.350463] systemd[1]: Starting dietpi-fs_partition_resize.service - DietPi-FS_partition_resize... [ 20.363913] systemd[1]: systemd-firstboot.service - First Boot Wizard was skipped because of an unmet condition check (ConditionFirstBoot=yes). [ 20.378449] systemd[1]: systemd-pstore.service - Platform Persistent Storage Archival was skipped because of an unmet condition check (ConditionDirectoryNotEmpty=/sys/fs/pstore). [ 20.400276] systemd[1]: Starting systemd-random-seed.service - Load/Save Random Seed... [ 20.412930] systemd[1]: systemd-repart.service - Repartition Root Disk was skipped because no trigger condition checks were met. [ 20.429803] systemd[1]: Starting systemd-sysctl.service - Apply Kernel Variables... [ 20.442509] systemd[1]: systemd-sysusers.service - Create System Users was skipped because no trigger condition checks were met. [ 20.459739] systemd[1]: Starting systemd-tmpfiles-setup-dev.service - Create Static Device Nodes in /dev... [ 20.481509] systemd[1]: Started systemd-journald.service - Journal Service. [ 20.886555] systemd-journald[327]: Received client request to flush runtime journal. [ 21.118716] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 21.135698] sd 1:0:0:0: Attached scsi generic sg1 type 0 [ 21.175569] random: crng init done [ 21.266579] gpiomem-exynos 13400000.gpiomem: Initialised: GPIO register area is 3 [ 21.267935] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x13400000 [ 21.267969] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x14010000 [ 21.267982] gpiomem-exynos 13400000.gpiomem: Initialised: Registers at 0x03860000 [ 21.364874] mali 11800000.gpu: GPU identified as 0x0620 r0p1 status 0 [ 21.364967] mali 11800000.gpu: Protected mode not available [ 21.365914] mali 11800000.gpu: Probed as mali0 [ 36.318269] vdd_ldo12: disabling