# SSH config corrupted during upgrade to 159 **URL:** https://dietpi.com/forum/t/ssh-config-corrupted-during-upgrade-to-159/1734 **Category:** Troubleshooting **Created:** [15 December 2017 15:09 UTC](https://dietpi.com/forum/t/ssh-config-corrupted-during-upgrade-to-159/1734 "2017-12-15T15:09:47Z") **Posts on this page:** 1 **Showing post:** 3
### Author: ![NTwoO](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/n/b4bc9f/32.png) [@NTwoO](https://dietpi.com/forum/u/NTwoO) #### Post date: [26 December 2017 21:38 UTC](https://dietpi.com/forum/t/ssh-config-corrupted-during-upgrade-to-159/1734/3 "2017-12-26T21:38:39Z")
There has been little progress for me on this issue. [This thread](https://dietpi.com/forum/t/wrong-ssh-password-after-update-from-158-to-159/1774/1) provided no solution. My passwords still seem to be correct. Below is the output of an incorrect password and a correct password with ssh debug output: ssh dietpi@mypi -vvv OpenSSH\_7.5p1-hpn14v12lpk, OpenSSL 1.0.2n 7 Dec 2017 debug1: Reading configuration data /etc/ssh/ssh\_config debug2: resolving “mypi” port 22 debug2: ssh\_connect\_direct: needpriv 0 debug1: Connecting to mypi […] port 22. debug1: Connection established. debug1: identity file /home/bla/.ssh/id\_rsa type 1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_rsa-cert type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_dsa type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_dsa-cert type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_ecdsa type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_ecdsa-cert type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_ed25519 type -1 debug1: key\_load\_public: No such file or directory debug1: identity file /home/bla/.ssh/id\_ed25519-cert type -1 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH\_7.5p1-hpn14v12lpk debug1: Remote protocol version 2.0, remote software version dropbear\_2014.65 debug1: no match: dropbear\_2014.65 debug2: fd 3 setting O\_NONBLOCK debug1: Authenticating to mypi:22 as ‘dietpi’ debug3: hostkeys\_foreach: reading file “/home/bla/.ssh/known\_hosts” debug3: record\_hostkey: found key type RSA in file /home/bla/.ssh/known\_hosts:3 debug3: load\_hostkeys: loaded 1 keys from mypi debug3: order\_hostkeyalgs: prefer hostkeyalgs: [ssh-rsa-cert-v01@openssh.com](mailto:ssh-rsa-cert-v01@openssh.com),rsa-sha2-512,rsa-sha2-256,ssh-rsa debug3: send packet: type 20 debug1: SSH2\_MSG\_KEXINIT sent debug3: receive packet: type 20 debug1: SSH2\_MSG\_KEXINIT received debug1: AUTH STATE IS 0 debug2: local client KEXINIT proposal debug2: KEX algorithms: curve25519-sha256,[curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org),ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1,ext-info-c debug2: host key algorithms: [ssh-rsa-cert-v01@openssh.com](mailto:ssh-rsa-cert-v01@openssh.com),rsa-sha2-512,rsa-sha2-256,ssh-rsa,[ecdsa-sha2-nistp256-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp256-cert-v01@openssh.com),[ecdsa-sha2-nistp384-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp384-cert-v01@openssh.com),[ecdsa-sha2-nistp521-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp521-cert-v01@openssh.com),[ssh-ed25519-cert-v01@openssh.com](mailto:ssh-ed25519-cert-v01@openssh.com),ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519 debug2: ciphers ctos: [chacha20-poly1305@openssh.com](mailto:chacha20-poly1305@openssh.com),aes128-ctr,aes192-ctr,aes256-ctr,[aes128-gcm@openssh.com](mailto:aes128-gcm@openssh.com),[aes256-gcm@openssh.com](mailto:aes256-gcm@openssh.com),aes128-cbc,aes192-cbc,aes256-cbc debug2: ciphers stoc: [chacha20-poly1305@openssh.com](mailto:chacha20-poly1305@openssh.com),aes128-ctr,aes192-ctr,aes256-ctr,[aes128-gcm@openssh.com](mailto:aes128-gcm@openssh.com),[aes256-gcm@openssh.com](mailto:aes256-gcm@openssh.com),aes128-cbc,aes192-cbc,aes256-cbc debug2: MACs ctos: [umac-64-etm@openssh.com](mailto:umac-64-etm@openssh.com),[umac-128-etm@openssh.com](mailto:umac-128-etm@openssh.com),[hmac-sha2-256-etm@openssh.com](mailto:hmac-sha2-256-etm@openssh.com),[hmac-sha2-512-etm@openssh.com](mailto:hmac-sha2-512-etm@openssh.com),[hmac-sha1-etm@openssh.com](mailto:hmac-sha1-etm@openssh.com),[umac-64@openssh.com](mailto:umac-64@openssh.com),[umac-128@openssh.com](mailto:umac-128@openssh.com),hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: [umac-64-etm@openssh.com](mailto:umac-64-etm@openssh.com),[umac-128-etm@openssh.com](mailto:umac-128-etm@openssh.com),[hmac-sha2-256-etm@openssh.com](mailto:hmac-sha2-256-etm@openssh.com),[hmac-sha2-512-etm@openssh.com](mailto:hmac-sha2-512-etm@openssh.com),[hmac-sha1-etm@openssh.com](mailto:hmac-sha1-etm@openssh.com),[umac-64@openssh.com](mailto:umac-64@openssh.com),[umac-128@openssh.com](mailto:umac-128@openssh.com),hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,[zlib@openssh.com](mailto:zlib@openssh.com),zlib debug2: compression stoc: none,[zlib@openssh.com](mailto:zlib@openssh.com),zlib debug2: languages ctos: debug2: languages stoc: debug2: first\_kex\_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: [curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org),ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,[kexguess2@matt.ucc.asn.au](mailto:kexguess2@matt.ucc.asn.au) debug2: host key algorithms: ssh-rsa,ssh-dss debug2: ciphers ctos: aes128-ctr,3des-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes256-cbc,twofish256-cbc,twofish-cbc,twofish128-cbc debug2: ciphers stoc: aes128-ctr,3des-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes256-cbc,twofish256-cbc,twofish-cbc,twofish128-cbc debug2: MACs ctos: hmac-sha1-96,hmac-sha1,hmac-md5 debug2: MACs stoc: hmac-sha1-96,hmac-sha1,hmac-md5 debug2: compression ctos: zlib,[zlib@openssh.com](mailto:zlib@openssh.com),none debug2: compression stoc: zlib,[zlib@openssh.com](mailto:zlib@openssh.com),none debug2: languages ctos: debug2: languages stoc: debug2: first\_kex\_follows 0 debug2: reserved 0 debug1: kex: algorithm: [curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org) debug1: kex: host key algorithm: ssh-rsa debug1: REQUESTED ENC.NAME is ‘aes128-ctr’ debug1: kex: server-\>client cipher: aes128-ctr MAC: hmac-sha1 compression: none debug1: REQUESTED ENC.NAME is ‘aes128-ctr’ debug1: kex: client-\>server cipher: aes128-ctr MAC: hmac-sha1 compression: none debug3: send packet: type 30 debug1: expecting SSH2\_MSG\_KEX\_ECDH\_REPLY debug3: receive packet: type 31 debug1: Server host key: ssh-rsa SHA256:EzF1P4esqyF1VY/EsHZSeeX//6G9KTdyVXpONOJkjfs debug3: hostkeys\_foreach: reading file “/home/bla/.ssh/known\_hosts” debug3: record\_hostkey: found key type RSA in file /home/bla/.ssh/known\_hosts:3 debug3: load\_hostkeys: loaded 1 keys from mypi debug3: hostkeys\_foreach: reading file “/home/bla/.ssh/known\_hosts” debug3: record\_hostkey: found key type RSA in file /home/bla/.ssh/known\_hosts:3 debug3: load\_hostkeys: loaded 1 keys from … debug1: Host ‘mypi’ is known and matches the RSA host key. debug1: Found key in /home/bla/.ssh/known\_hosts:3 debug3: send packet: type 21 debug2: set\_newkeys: mode 1 debug1: rekey after 4294967296 blocks debug1: SSH2\_MSG\_NEWKEYS sent debug1: expecting SSH2\_MSG\_NEWKEYS debug3: receive packet: type 21 debug1: SSH2\_MSG\_NEWKEYS received debug2: set\_newkeys: mode 0 debug1: rekey after 4294967296 blocks debug2: key: /home/bla/.ssh/id\_rsa (0x55eeb6feea50) debug2: key: /home/bla/.ssh/id\_dsa ((nil)) debug2: key: /home/bla/.ssh/id\_ecdsa ((nil)) debug2: key: /home/bla/.ssh/id\_ed25519 ((nil)) debug3: send packet: type 5 debug3: receive packet: type 6 debug2: service\_accept: ssh-userauth debug1: SSH2\_MSG\_SERVICE\_ACCEPT received debug3: send packet: type 50 debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password debug3: start over, passed a different list publickey,password debug3: preferred publickey,keyboard-interactive,password debug3: authmethod\_lookup publickey debug3: remaining preferred: keyboard-interactive,password debug3: authmethod\_is\_enabled publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /home/bla/.ssh/id\_rsa debug3: send\_pubkey\_test debug3: send packet: type 50 debug2: we sent a publickey packet, wait for reply debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password debug1: Trying private key: /home/bla/.ssh/id\_dsa debug3: no such identity: /home/bla/.ssh/id\_dsa: No such file or directory debug1: Trying private key: /home/bla/.ssh/id\_ecdsa debug3: no such identity: /home/bla/.ssh/id\_ecdsa: No such file or directory debug1: Trying private key: /home/bla/.ssh/id\_ed25519 debug3: no such identity: /home/bla/.ssh/id\_ed25519: No such file or directory debug2: we did not send a packet, disable method debug3: authmethod\_lookup password debug3: remaining preferred: ,password debug3: authmethod\_is\_enabled password debug1: Next authentication method: password dietpi@mypi’s password: debug3: send packet: type 50 debug2: we sent a password packet, wait for reply debug3: receive packet: type 51 debug1: Authentications that can continue: publickey,password Permission denied, please try again. dietpi@mypi’s password: debug3: send packet: type 50 debug2: we sent a password packet, wait for reply debug3: receive packet: type 52 debug1: Single to Multithread CTR cipher swap - client request debug1: Authentication succeeded (password). Authenticated to mypi ([…]:22). debug1: Final hpn\_buffer\_size = 2097152 debug1: HPN Disabled: 0, HPN Buffer Size: 2097152 debug1: channel 0: new [client-session] debug1: Enabled Dynamic Window Scaling debug3: ssh\_session2\_open: channel\_new: 0 debug2: channel 0: send open debug3: ssh\_packet\_send2: rekex triggered debug1: enqueue packet: 90 debug3: send packet: type 20 debug1: SSH2\_MSG\_KEXINIT sent debug1: Entering interactive session. debug1: pledge: network debug1: rekeying in progress debug1: rekeying in progress debug3: receive packet: type 20 debug1: SSH2\_MSG\_KEXINIT received debug1: AUTH STATE IS 1 debug2: local client KEXINIT proposal debug2: KEX algorithms: curve25519-sha256,[curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org),ecdh-sha2-nistp256,ecdh-sha2-nistp384,ecdh-sha2-nistp521,diffie-hellman-group-exchange-sha256,diffie-hellman-group16-sha512,diffie-hellman-group18-sha512,diffie-hellman-group-exchange-sha1,diffie-hellman-group14-sha256,diffie-hellman-group14-sha1 debug2: host key algorithms: [ssh-rsa-cert-v01@openssh.com](mailto:ssh-rsa-cert-v01@openssh.com),rsa-sha2-512,rsa-sha2-256,ssh-rsa,[ecdsa-sha2-nistp256-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp256-cert-v01@openssh.com),[ecdsa-sha2-nistp384-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp384-cert-v01@openssh.com),[ecdsa-sha2-nistp521-cert-v01@openssh.com](mailto:ecdsa-sha2-nistp521-cert-v01@openssh.com),[ssh-ed25519-cert-v01@openssh.com](mailto:ssh-ed25519-cert-v01@openssh.com),ecdsa-sha2-nistp256,ecdsa-sha2-nistp384,ecdsa-sha2-nistp521,ssh-ed25519 debug2: ciphers ctos: [chacha20-poly1305@openssh.com](mailto:chacha20-poly1305@openssh.com),aes128-ctr,aes192-ctr,aes256-ctr,[aes128-gcm@openssh.com](mailto:aes128-gcm@openssh.com),[aes256-gcm@openssh.com](mailto:aes256-gcm@openssh.com),aes128-cbc,aes192-cbc,aes256-cbc debug2: ciphers stoc: [chacha20-poly1305@openssh.com](mailto:chacha20-poly1305@openssh.com),aes128-ctr,aes192-ctr,aes256-ctr,[aes128-gcm@openssh.com](mailto:aes128-gcm@openssh.com),[aes256-gcm@openssh.com](mailto:aes256-gcm@openssh.com),aes128-cbc,aes192-cbc,aes256-cbc debug2: MACs ctos: [umac-64-etm@openssh.com](mailto:umac-64-etm@openssh.com),[umac-128-etm@openssh.com](mailto:umac-128-etm@openssh.com),[hmac-sha2-256-etm@openssh.com](mailto:hmac-sha2-256-etm@openssh.com),[hmac-sha2-512-etm@openssh.com](mailto:hmac-sha2-512-etm@openssh.com),[hmac-sha1-etm@openssh.com](mailto:hmac-sha1-etm@openssh.com),[umac-64@openssh.com](mailto:umac-64@openssh.com),[umac-128@openssh.com](mailto:umac-128@openssh.com),hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: MACs stoc: [umac-64-etm@openssh.com](mailto:umac-64-etm@openssh.com),[umac-128-etm@openssh.com](mailto:umac-128-etm@openssh.com),[hmac-sha2-256-etm@openssh.com](mailto:hmac-sha2-256-etm@openssh.com),[hmac-sha2-512-etm@openssh.com](mailto:hmac-sha2-512-etm@openssh.com),[hmac-sha1-etm@openssh.com](mailto:hmac-sha1-etm@openssh.com),[umac-64@openssh.com](mailto:umac-64@openssh.com),[umac-128@openssh.com](mailto:umac-128@openssh.com),hmac-sha2-256,hmac-sha2-512,hmac-sha1 debug2: compression ctos: none,[zlib@openssh.com](mailto:zlib@openssh.com),zlib debug2: compression stoc: none,[zlib@openssh.com](mailto:zlib@openssh.com),zlib debug2: languages ctos: debug2: languages stoc: debug2: first\_kex\_follows 0 debug2: reserved 0 debug2: peer server KEXINIT proposal debug2: KEX algorithms: [curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org),ecdh-sha2-nistp521,ecdh-sha2-nistp384,ecdh-sha2-nistp256,diffie-hellman-group1-sha1,diffie-hellman-group14-sha1,[kexguess2@matt.ucc.asn.au](mailto:kexguess2@matt.ucc.asn.au) debug2: host key algorithms: ssh-rsa,ssh-dss debug2: ciphers ctos: aes128-ctr,3des-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes256-cbc,twofish256-cbc,twofish-cbc,twofish128-cbc debug2: ciphers stoc: aes128-ctr,3des-ctr,aes256-ctr,aes128-cbc,3des-cbc,aes256-cbc,twofish256-cbc,twofish-cbc,twofish128-cbc debug2: MACs ctos: hmac-sha1-96,hmac-sha1,hmac-md5 debug2: MACs stoc: hmac-sha1-96,hmac-sha1,hmac-md5 debug2: compression ctos: zlib,[zlib@openssh.com](mailto:zlib@openssh.com),none debug2: compression stoc: zlib,[zlib@openssh.com](mailto:zlib@openssh.com),none debug2: languages ctos: debug2: languages stoc: debug2: first\_kex\_follows 0 debug2: reserved 0 debug1: kex: algorithm: [curve25519-sha256@libssh.org](mailto:curve25519-sha256@libssh.org) debug1: kex: host key algorithm: ssh-rsa debug1: REQUESTED ENC.NAME is ‘aes128-ctr’ debug1: kex: server-\>client cipher: aes128-ctr MAC: hmac-sha1 compression: none debug1: REQUESTED ENC.NAME is ‘aes128-ctr’ debug1: kex: client-\>server cipher: aes128-ctr MAC: hmac-sha1 compression: none debug3: send packet: type 30 debug1: expecting SSH2\_MSG\_KEX\_ECDH\_REPLY debug1: rekeying in progress debug1: rekeying in progress debug3: receive packet: type 31 debug1: Server host key: ssh-rsa SHA256:EzF1P4esqyF1VY/EsHZSeeX//6G9KTdyVXpONOJkjfs debug2: verify\_host\_key: server host key RSA SHA256:EzF1P4esqyF1VY/EsHZSeeX//6G9KTdyVXpONOJkjfs matches cached key debug3: send packet: type 21 debug2: set\_newkeys: mode 1 debug1: ssh\_set\_newkeys: rekeying after 136 output blocks (3672 bytes total) debug1: spawned a thread debug1: spawned a thread debug1: rekey after 4294967296 blocks debug1: dequeue packet: 90 debug3: send packet: type 90 debug1: SSH2\_MSG\_NEWKEYS sent debug1: expecting SSH2\_MSG\_NEWKEYS debug3: receive packet: type 21 debug1: SSH2\_MSG\_NEWKEYS received debug2: set\_newkeys: mode 0 debug1: ssh\_set\_newkeys: rekeying after 87 input blocks (2592 bytes total) debug1: spawned a thread debug1: spawned a thread debug1: rekey after 4294967296 blocks debug3: receive packet: type 91 debug2: callback start debug2: fd 3 setting TCP\_NODELAY/SCTP\_NODELAY debug3: ssh\_packet\_set\_tos: set IPV6\_TCLASS 0x10 debug2: client\_session2\_setup: id 0 debug2: channel 0: request pty-req confirm 1 debug3: send packet: type 98 debug1: Sending environment. debug3: Ignored env MANPATH debug3: Ignored env SAL\_USE\_VCLPLUGIN debug3: Ignored env TERM debug3: Ignored env SHELL debug3: Ignored env XDG\_MENU\_PREFIX debug3: Ignored env XDG\_SESSION\_COOKIE debug3: Ignored env GNOME\_KEYRING\_CONTROL debug3: Ignored env USER debug3: Ignored env LS\_COLORS debug3: Ignored env PAGER debug3: Ignored env CONFIG\_PROTECT\_MASK debug3: Ignored env FLTK\_DOCDIR debug3: Ignored env XDG\_CONFIG\_DIRS debug3: Ignored env PATH debug3: Ignored env MAIL debug3: Ignored env DESKTOP\_SESSION debug3: Ignored env QT\_QPA\_PLATFORMTHEME debug3: Ignored env PWD debug3: Ignored env JAVA\_HOME debug3: Ignored env EDITOR debug3: Ignored env JAVAC debug1: Sending env LANG = en\_US.utf8 debug2: channel 0: request env confirm 0 debug3: send packet: type 98 debug3: Ignored env GSETTINGS\_BACKEND debug3: Ignored env QT\_GRAPHICSSYSTEM debug3: Ignored env \_LXSESSION\_PID debug3: Ignored env QT\_PLATFORM\_PLUGIN debug3: Ignored env PYTHONDOCS\_3\_4 debug3: Ignored env MANPAGER debug3: Ignored env HOME debug3: Ignored env JDK\_HOME debug3: Ignored env SHLVL debug3: Ignored env XDG\_CONFIG\_HOME debug3: Ignored env LESS debug3: Ignored env LOGNAME debug3: Ignored env GCC\_SPECS debug3: Ignored env XDG\_DATA\_DIRS debug3: Ignored env DBUS\_SESSION\_BUS\_ADDRESS debug3: Ignored env LESSOPEN debug3: Ignored env R\_HOME debug3: Ignored env INFOPATH debug3: Ignored env DISPLAY debug3: Ignored env OPENGL\_PROFILE debug3: Ignored env XDG\_CURRENT\_DESKTOP debug3: Ignored env CONFIG\_PROTECT debug3: Ignored env XAUTHORITY debug3: Ignored env \_ debug2: channel 0: request shell confirm 1 debug3: send packet: type 98 debug2: callback done debug2: channel 0: open confirm rwindow 65536 rmax 32759 debug2: tcpwinsz: 369280 for connection: 3 debug2: tcpwinsz: 369280 for connection: 3 debug3: receive packet: type 99 debug2: channel\_input\_status\_confirm: type 99 id 0 debug2: PTY allocation request accepted on channel 0 debug3: receive packet: type 99 debug2: channel\_input\_status\_confirm: type 99 id 0 debug2: shell request accepted on channel 0 debug2: tcpwinsz: 369280 for connection: 3 debug3: receive packet: type 96 debug2: channel 0: rcvd eof debug2: channel 0: output open → drain debug3: receive packet: type 98 debug1: client\_input\_channel\_req: channel 0 rtype exit-signal reply 0 debug3: receive packet: type 97 debug2: channel 0: rcvd close debug2: channel 0: close\_read debug2: channel 0: input open → closed debug3: channel 0: will not send data after close debug2: tcpwinsz: 369280 for connection: 3 The programs included with the Debian GNU/Linux system are free software; the exact distribution terms for each program are described in the individual files in /usr/share/doc/\*/copyright. Debian GNU/Linux comes with ABSOLUTELY NO WARRANTY, to the extent permitted by applicable law. debug3: channel 0: will not send data after close debug2: tcpwinsz: 369280 for connection: 3 debug2: channel 0: obuf empty debug2: channel 0: close\_write debug2: channel 0: output drain → closed debug2: channel 0: almost dead debug2: channel 0: gc: notify user debug2: channel 0: gc: user detached debug2: channel 0: send close debug3: send packet: type 97 debug2: channel 0: is dead debug2: channel 0: garbage collecting debug1: channel 0: free: client-session, nchannels 1 debug3: channel 0: status: The following connections are open: #0 client-session (t4 r0 i3/0 o3/0 fd -1/-1 cc -1) debug3: send packet: type 1 Connection to smoot closed. Transferred: sent 4184, received 3056 bytes, in 0.2 seconds Bytes per second: sent 22674.2, received 16561.3 debug1: Exit status -1 --- _[View the full topic](https://dietpi.com/forum/t/ssh-config-corrupted-during-upgrade-to-159/1734)._