# Sound on Roon with card "none" but no with squeezelite !?!
**URL:** https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071
**Category:** Troubleshooting
**Created:** [29 March 2019 14:46 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071 "2019-03-29T14:46:11Z")
**Posts on this page:** 6
**Page:** 1
### Author:  [@zaurux](https://dietpi.com/forum/u/zaurux)
#### Post date: [29 March 2019 14:46 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/1 "2019-03-29T14:46:11Z")
With my Allo USBridge and last version of Dietpi (6.22.3), i have sound on my dac (Audio-GD with amanero card) but with card “none” (previously USB-dac 1.1) ?! (“none” on Allo web interface and dietpi-config too)
I’m happy… i have sound with Roon but no output with squeezelite.
If i choose another sound driver (ex. usb-dac 1.1), squeezelite service crash.
With card “none”, i have sound, but i think squeezelite conf has not the good output.
USB PORT INFO
```nohighlight
/: Bus 04.Port 1: Dev 1, Class=root_hub, Driver=aotg_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/2p, 480M
|__ Port 1: Dev 4, If 0, Class=Vendor Specific Class, Driver=, 480M
|__ Port 1: Dev 4, If 1, Class=Audio, Driver=snd-usb-audio, 480M
|__ Port 1: Dev 4, If 2, Class=Audio, Driver=snd-usb-audio, 480M
/: Bus 03.Port 1: Dev 1, Class=root_hub, Driver=aotg_hcd/1p, 480M
|__ Port 1: Dev 2, If 0, Class=Hub, Driver=hub/4p, 480M
/: Bus 02.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 5000M
/: Bus 01.Port 1: Dev 1, Class=root_hub, Driver=xhci-hcd/1p, 480M
```
SOUND CARD INFO :
```nohighlight
Amanero Technologies Combo384 Amanero at usb-aotg_hcd.1-1.1, high speed : USB Audio
Playback:
Status: Running
Interface = 2
Altset = 1
Packet Size = 228
Momentary freq = 176394 Hz (0x16.0c98)
Feedback Format = 16.16
Interface 2
Altset 1
Format: S32_LE
Channels: 2
Endpoint: 5 OUT (ASYNC)
Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000
Data packet interval: 125 us
```
APLAY INFO
```nohighlight
****Liste des Périphériques Matériels PLAYBACK****
carte 0: atm7059link [atm7059_link], périphérique 0: ATC2603C PCM atc2603c-dai-0 []
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: atm7059link [atm7059_link], périphérique 1: HDMI PCM atm7059-hdmi-dai-1 []
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 0: atm7059link [atm7059_link], périphérique 2: SPDIF PCM atm7059-spdif-dai-2 []
Sous-périphériques: 1/1
Sous-périphérique #0: subdevice #0
carte 1: Amanero [Combo384 Amanero], périphérique 0: USB Audio [USB Audio]
Sous-périphériques: 0/1
Sous-périphérique #0: subdevice #0
```
squeezelite -l :
```nohighlight
Output devices:
null - Discard all samples (playback) or generate zero samples (capture)
equal
sysdefault:CARD=atm7059link - atm7059_link, - Default Audio Device
dmix:CARD=atm7059link,DEV=0 - atm7059_link, - Direct sample mixing device
dmix:CARD=atm7059link,DEV=1 - atm7059_link, - Direct sample mixing device
dmix:CARD=atm7059link,DEV=2 - atm7059_link, - Direct sample mixing device
dsnoop:CARD=atm7059link,DEV=0 - atm7059_link, - Direct sample snooping device
dsnoop:CARD=atm7059link,DEV=1 - atm7059_link, - Direct sample snooping device
dsnoop:CARD=atm7059link,DEV=2 - atm7059_link, - Direct sample snooping device
hw:CARD=atm7059link,DEV=0 - atm7059_link, - Direct hardware device without any conversions
hw:CARD=atm7059link,DEV=1 - atm7059_link, - Direct hardware device without any conversions
hw:CARD=atm7059link,DEV=2 - atm7059_link, - Direct hardware device without any conversions
plughw:CARD=atm7059link,DEV=0 - atm7059_link, - Hardware device with all software conversions
plughw:CARD=atm7059link,DEV=1 - atm7059_link, - Hardware device with all software conversions
plughw:CARD=atm7059link,DEV=2 - atm7059_link, - Hardware device with all software conversions
sysdefault:CARD=Amanero - Combo384 Amanero, USB Audio - Default Audio Device
front:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - Front speakers
surround21:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 2.1 Surround output to Front and Subwoofer speakers
surround40:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 4.0 Surround output to Front and Rear speakers
surround41:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 4.1 Surround output to Front, Rear and Subwoofer speakers
surround50:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 5.0 Surround output to Front, Center and Rear speakers
surround51:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 5.1 Surround output to Front, Center, Rear and Subwoofer speakers
surround71:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - 7.1 Surround output to Front, Center, Side, Rear and Woofer speakers
iec958:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - IEC958 (S/PDIF) Digital Audio Output
dmix:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - Direct sample mixing device
dsnoop:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - Direct sample snooping device
hw:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - Direct hardware device without any conversions
plughw:CARD=Amanero,DEV=0 - Combo384 Amanero, USB Audio - Hardware device with all software conversions
```
---
### Author:  [@zaurux](https://dietpi.com/forum/u/zaurux)
#### Post date: [29 March 2019 15:33 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/2 "2019-03-29T15:33:19Z")
It works if i stop Roon and in a terminal launch this command :
```nohighlight
root@DietPi:~# squeezelite -o hw:CARD=Amanero
```
But no possibility to make a good and stable configuration with dietpi-config.
---
### Author:  [@MichaIng](https://dietpi.com/forum/u/MichaIng)
#### Post date: [29 March 2019 22:34 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/3 "2019-03-29T22:34:35Z")
zaurux
Many thanks for your report.
Which device do you use? Ah if usb-dac-1.1 is available it must be Sparky SBC right?
And did it work before with an older DietPi version and when selecting “usb-dac 1.1”?
I wonder that “none” works for your since this should add hw:0,0 (card 0 device 0) to your asound.conf which is as of your output the analogue 3.5mm jack which should be disabled.
The USB DAC is hw:1,0 which should be auto detected when selecting usb-dac.
Now I wonder why you can actually choose “none” since this is only available on RPi 🤔.
Please verify which SBC you use and paste:
echo $G\_HW\_MODEL
cat /etc/asound.conf
- At best the above once when selecting “none” and once when selecting “usb-dac-1.1” (even that those two options should not be visible on the same device). And then if there is an output through the DAC.
---
### Author:  [@zaurux](https://dietpi.com/forum/u/zaurux)
#### Post date: [31 March 2019 17:31 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/4 "2019-03-31T17:31:29Z")
Thanks for reponse.
It’s an AlloUSBridge (Sparky) whith AUdio-GD DAC via Amanero USB port
```nohighlight
root@DietPi:~# echo $G_HW_MODEL
70
root@DietPi:~# cat /etc/asound.conf
pcm.!default {
type hw
card 0
device 0
}
ctl.!default {
type hw
card 0
}
root@DietPi:~#
```
---
### Author:  [@zaurux](https://dietpi.com/forum/u/zaurux)
#### Post date: [31 March 2019 17:44 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/5 "2019-03-31T17:44:27Z")
I am confused … I tested usb-dac, it works.
I had not tried because before I was on usb-dac 1.1.
And now it works also under squeezelite.
Squeezelite reads dsd files without any particular plugin.
But I do not know what are the options built into the squeezlite config and what is sent to the dac for DSD.
```nohighlight
root@DietPi:~# cat /etc/asound.conf
pcm.!default {
type hw
card 1
device 0
}
ctl.!default {
type hw
card 1
}
root@DietPi:~#
```
Dop with downsampling ?
```nohighlight
Amanero Technologies Combo384 Amanero at usb-aotg_hcd.1-1.1, high speed : USB Audio
Playback:
Status: Running
Interface = 2
Altset = 1
Packet Size = 228
Momentary freq = 176394 Hz (0x16.0c98)
Feedback Format = 16.16
Interface 2
Altset 1
Format: S32_LE
Channels: 2
Endpoint: 5 OUT (ASYNC)
Rates: 32000, 44100, 48000, 88200, 96000, 176400, 192000, 352800, 384000
Data packet interval: 125 us
```
---
### Author:  [@MichaIng](https://dietpi.com/forum/u/MichaIng)
#### Post date: [31 March 2019 18:04 UTC](https://dietpi.com/forum/t/sound-on-roon-with-card-none-but-no-with-squeezelite/3071/6 "2019-03-31T18:04:00Z")
Ah this makes sense. usb-dac-1.1 adds a kernel cmdline option to force the USB speed to 1.1. This is only required and should be only used if the USB-DAC is known to be incompatible with other USB speed modes.
About the DSD to be true this is out of my knowledge as well 😉.