# \[SOLVED\] Enable DietPI boot to Pimoroni HyperPixel display

**URL:** <https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496>\
**Category:** Troubleshooting\
**Created:** [9 April 2022 17:16 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496 "2022-04-09T17:16:32Z")\
**Posts on this page:** 1\
**Showing post:** 5

<div class="post-metadata">

**Author:** ![giuliomagnifico](https://dietpi.com/forum/user_avatar/dietpi.com/giuliomagnifico/32/1890_2.png) [@giuliomagnifico](https://dietpi.com/forum/u/giuliomagnifico)\
**Post date:** [9 April 2022 19:10 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/5 "2022-04-09T19:10:48Z")

</div>

Yes’ it’s enabled but the display simply does show nothing, blank.

I found this interesting thread here on the forum: [https://dietpi.com/forum/t/dietpi-rpi-4-hyperpixel-4/3936/1](https://dietpi.com/forum/t/dietpi-rpi-4-hyperpixel-4/3936/1) so I think the problem is the install script of the drivers that uses the /boot/config but dietpi uses /boot/dietpi/dietpi-config file. I tried to edit it but it’s weird, I should insert those lines to the boot (as my old raspbian installation)

```nohighlight
dtoverlay=vc4-fkms-v3d
max_framebuffers=2
dtoverlay=hyperpixel4,touchscreen-inverted-3,touchscreen-inverted-3
display_rotate=3
enable_dpi_lcd=1
dpi_group=2
dpi_mode=87
dpi_output_format=0x7f216
dpi_timings=480 0 10 16 59 800 0 15 113 15 0 0 0 60 0 32000000 6

```

How can I pass this to /boot/config?

Thanks

---

_[View the full topic](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496)._