# \[SOLVED\] Enable DietPI boot to Pimoroni HyperPixel display **URL:** \ **Category:** Troubleshooting\ **Created:** [9 April 2022 17:16 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496 "2022-04-09T17:16:32Z")\ **Posts on this page:** 8\ **Page:** 2
**Author:** ![giuliomagnifico](https://dietpi.com/forum/user_avatar/dietpi.com/giuliomagnifico/32/1890_2.png) [@giuliomagnifico](https://dietpi.com/forum/u/giuliomagnifico)\ **Post date:** [10 January 2023 17:03 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/21 "2023-01-10T17:03:49Z")
But this is wrong, the image is pretty bad, you have to install the new driver/dtoverlay and then use the new config section. ---
**Author:** ![pdrift](https://dietpi.com/forum/user_avatar/dietpi.com/pdrift/32/3306_2.png) [@pdrift](https://dietpi.com/forum/u/pdrift)\ **Post date:** [10 January 2023 19:27 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/22 "2023-01-10T19:27:25Z")
I guess I’ll start over, i installed the legacy drivers. ---
**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\ **Post date:** [10 January 2023 19:43 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/23 "2023-01-10T19:43:09Z")
are you using 64bit? If yes, legacy driver was the incorrect one. On current version, drivers should be build-in. This is a note from their install instructions > Pi 3B and Pi 4 users running the latest and greatest Raspberry Pi OS should forego our installer and use the instructions below. And the info from thier web site > **Raspberry Pi OS Bullseye** includes major changes to how DPI display drivers work. If you’re using an image dated 04/04/2022 or later, it will come with Hyperpixel drivers baked in and you don’t need to run the installer. You can set up display and touch by adding a few lines to your `boot/config.txt`: > [PSA: HyperPixel 4 (Square & Rectangular) on Raspberry Pi OS 2022-04-04](https://github.com/pimoroni/hyperpixel4/issues/177) ---
**Author:** ![pdrift](https://dietpi.com/forum/user_avatar/dietpi.com/pdrift/32/3306_2.png) [@pdrift](https://dietpi.com/forum/u/pdrift)\ **Post date:** [10 January 2023 21:46 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/24 "2023-01-10T21:46:58Z")
Yeah i think it is the 64bit version. I might give 32 bit a shot as well. ---
**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\ **Post date:** [10 January 2023 22:03 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/25 "2023-01-10T22:03:42Z")
> [@pdrift](#): > > I might give 32 bit a shot as well. why would you do that? ---
**Author:** ![pdrift](https://dietpi.com/forum/user_avatar/dietpi.com/pdrift/32/3306_2.png) [@pdrift](https://dietpi.com/forum/u/pdrift)\ **Post date:** [11 January 2023 01:32 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/26 "2023-01-11T01:32:42Z")
Some apps that I want to use don’t work on 64bit arm. ---
**Author:** ![pdrift](https://dietpi.com/forum/user_avatar/dietpi.com/pdrift/32/3306_2.png) [@pdrift](https://dietpi.com/forum/u/pdrift)\ **Post date:** [11 January 2023 01:54 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/27 "2023-01-11T01:54:16Z")
The driver’s are built into the newest raspberry pi os. I have this screen working on that os by only editing the config txt. I don’t think the driver’s are built into dietpi. I tried doing the same on dietpi and it did not work. ---
**Author:** ![pdrift](https://dietpi.com/forum/user_avatar/dietpi.com/pdrift/32/3306_2.png) [@pdrift](https://dietpi.com/forum/u/pdrift)\ **Post date:** [11 January 2023 07:22 UTC](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496/28 "2023-01-11T07:22:10Z")
Well i managed to get it working. I manually copied the config.txt and the three hyperpixel overlays from my working raspbery pi os install over to my freshly baked dietpi install. [Previous page](https://dietpi.com/forum/t/solved-enable-dietpi-boot-to-pimoroni-hyperpixel-display/6496.md?page=1)