# SATA HAT Top board installation on DietPi **URL:** \ **Category:** Troubleshooting\ **Created:** [3 February 2022 11:23 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268 "2022-02-03T11:23:17Z")\ **Posts on this page:** 5\ **Page:** 1
**Author:** ![420](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/4/7ab992/32.png) [@420](https://dietpi.com/forum/u/420)\ **Post date:** [3 February 2022 11:23 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268/1 "2022-02-03T11:23:17Z")
Hi I’m trying to install the SATA HAT Top board on DietPi. I’m using a Raspberry Pi 4 B. I’m following the instructions on the Radxa Wiki ( [https://wiki.radxa.com/Dual\_Quad\_SATA\_HAT](https://wiki.radxa.com/Dual_Quad_SATA_HAT) ) When executing the provided command ( curl -sL [https://rock.sh/get-rockpi-sata](https://rock.sh/get-rockpi-sata) | sudo -E bash - ), I get: \*\*\* The script is not available on your system \*\*\* Please visit [https://rock.sh/rockpi-sata](https://rock.sh/rockpi-sata) to download and install manually. So I manually downloaded the install.sh, ran ( sudo chmod +x install.sh ), then ( ./install.sh ). I get the same output as before. I tried installing python first, same result. Approximately a year ago, I successfully installed it on DietPi and under Respberry OS it also works. I really want to use DietPi since it outperformes all other OS’s. But I also want to use the top board. Otherwise it would be useless and I hate useless stuff. Please help me! ---
**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\ **Post date:** [3 February 2022 13:32 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268/2 "2022-02-03T13:32:39Z")
I had a look into the script and it is expecting a OS called raspbian. Could you share following ```nohighlight cat /etc/os-release | grep ^ID= | sed -e 's/ID\=//g' ``` I guess it will return debian 😉 Why? Because, since Bullseye our ARMv7 + ARMv8 images are based on Debian package repository. Pure Raspbian image would be the ARMv6 one [https://dietpi.com/#downloadinfo](https://dietpi.com/#downloadinfo) Anyway, the script is doing nothing else than downloading another script based on OS type. You could try it manually. ```nohighlight curl -sL https://s3.setq.io/rockpi/sh/quad-sata/raspbian.sh | sudo -E bash - ``` ---
**Author:** ![420](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/4/7ab992/32.png) [@420](https://dietpi.com/forum/u/420)\ **Post date:** [4 February 2022 14:22 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268/3 "2022-02-04T14:22:54Z")
Thank you!! ---
**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\ **Post date:** [4 February 2022 14:27 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268/4 "2022-02-04T14:27:12Z")
was this working? ---
**Author:** ![makmax](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/m/b5e925/32.png) [@makmax](https://dietpi.com/forum/u/makmax)\ **Post date:** [29 December 2022 09:26 UTC](https://dietpi.com/forum/t/sata-hat-top-board-installation-on-dietpi/6268/5 "2022-12-29T09:26:21Z")
I try this workaround that working for me: 1. install manually apt install python3-rpi.gpio python3-setuptools python3-pip python3-pil python3-spidev pigpio python3-pigpio 2. download script [https://s3.setq.io/rockpi/sh/quad-sata/raspbian.sh](https://s3.setq.io/rockpi/sh/quad-sata/raspbian.sh) to /root/tmp 3. make it executable (chmod +x /root/tmp/raspbian.sh) 4. launch it ./raspbian.sh SATA QUAD “Lords” could improve their scripts !!!