# Run Zigbee USB-Stick under x86 DietPi?

**URL:** https://dietpi.com/forum/t/run-zigbee-usb-stick-under-x86-dietpi/4132
**Category:** General Discussion
**Created:** [22 May 2020 10:42 UTC](https://dietpi.com/forum/t/run-zigbee-usb-stick-under-x86-dietpi/4132 "2020-05-22T10:42:04Z")
**Posts on this page:** 2
**Page:** 1

<div class="post-metadata">

### Author: ![TOMillr](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/t/e495f1/32.png) [@TOMillr](https://dietpi.com/forum/u/TOMillr)
#### Post date: [22 May 2020 10:42 UTC](https://dietpi.com/forum/t/run-zigbee-usb-stick-under-x86-dietpi/4132/1 "2020-05-22T10:42:04Z")

</div>

I’d like to get on of those [Conbee II USB-sticks](https://www.phoscon.de/en/conbee2) for home automation and turn my Intel NUC into a Zigbee hub.

Has anyone been able to get them to work on a x86-version of DietPi? The official site only [provides instruction](https://www.phoscon.de/en/conbee2/install) to install the required software on a desktop version of Ubuntu.

---

<div class="post-metadata">

### Author: ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)
#### Post date: [22 May 2020 11:19 UTC](https://dietpi.com/forum/t/run-zigbee-usb-stick-under-x86-dietpi/4132/2 "2020-05-22T11:19:25Z")

</div>

Hi,

many thanks for your question. Basically you could try following the instruction for

[https://www.phoscon.de/en/conbee2/install#raspbian](https://www.phoscon.de/en/conbee2/install#raspbian)

Basically you would need to create the source list entry and add the Phoscon public key. Than you are able to install the software via apt as all other Debian software packages.