# RPi Zero W

**URL:** <https://dietpi.com/forum/t/rpi-zero-w/3142>\
**Category:** Troubleshooting\
**Created:** [29 April 2019 11:15 UTC](https://dietpi.com/forum/t/rpi-zero-w/3142 "2019-04-29T11:15:34Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![mia](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/m/da6949/32.png) [@mia](https://dietpi.com/forum/u/mia)\
**Post date:** [29 April 2019 11:15 UTC](https://dietpi.com/forum/t/rpi-zero-w/3142/1 "2019-04-29T11:15:34Z")

</div>

How should I enable the wifi as this device does not have an ethernet socket?  
I’m sure there is a way to set this up completely headless by modifying setup files but I was unable to do it with wpa\_supplicant so I wanted to ask anyway.

---

<div class="post-metadata">

**Author:** ![MichaIng](https://dietpi.com/forum/user_avatar/dietpi.com/michaing/32/7_2.png) [@MichaIng](https://dietpi.com/forum/u/MichaIng)\
**Post date:** [26 May 2019 18:15 UTC](https://dietpi.com/forum/t/rpi-zero-w/3142/2 "2019-05-26T18:15:08Z")

</div>

mia  
Sorry for the late reply.

Check out dietpi-wifi.txt from the FAT partition that should pop up on Windows after flashing the image. If you don’t use EAP, then then just fill the following two:  
aWIFI\_SSID[0]=‘your\_SSID’  
aWIFI\_KEY[0]=‘your\_WiFI\_password’