# Rpi gpio node-red library not work on dietpi bookworm and trixie?

**URL:** https://dietpi.com/forum/t/rpi-gpio-node-red-library-not-work-on-dietpi-bookworm-and-trixie/25047
**Category:** General Discussion
**Created:** [18 March 2026 20:35 UTC](https://dietpi.com/forum/t/rpi-gpio-node-red-library-not-work-on-dietpi-bookworm-and-trixie/25047 "2026-03-18T20:35:22Z")
**Posts on this page:** 1
**Showing post:** 3

<div class="post-metadata">

### Author: ![devifast](https://dietpi.com/forum/user_avatar/dietpi.com/devifast/32/2254_2.png) [@devifast](https://dietpi.com/forum/u/devifast)
#### Post date: [19 March 2026 16:02 UTC](https://dietpi.com/forum/t/rpi-gpio-node-red-library-not-work-on-dietpi-bookworm-and-trixie/25047/3 "2026-03-19T16:02:40Z")

</div>

Since Dietpi Bulseye, when I install Node Red and the rpi-gpio library, the pins on my rpi zero2 are not configured. This is related to the library, I think it was lgpio, which is installed during the installation of Node Red. The old library that was installed with Bulseye was called rpi-gpio or something similar. I’m almost sure that the problem is from changing the libraries, I even commented on it with someone but I never got to the end. Now I have to solve this problem because I can’t run it on Bulseye forever.

[https://dietpi.com/forum/t/node-red-node-pi-gpio-library/24578](https://dietpi.com/forum/t/node-red-node-pi-gpio-library/24578)

---

_[View the full topic](https://dietpi.com/forum/t/rpi-gpio-node-red-library-not-work-on-dietpi-bookworm-and-trixie/25047)._