# router image for N-2

**URL:** <https://dietpi.com/forum/t/router-image-for-n-2/3252>\
**Category:** Requests\
**Created:** [6 June 2019 16:41 UTC](https://dietpi.com/forum/t/router-image-for-n-2/3252 "2019-06-06T16:41:37Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![phaseshifter](https://dietpi.com/forum/letter_avatar_proxy/v4/letter/p/f1d935/32.png) [@phaseshifter](https://dietpi.com/forum/u/phaseshifter)\
**Post date:** [6 June 2019 16:41 UTC](https://dietpi.com/forum/t/router-image-for-n-2/3252/1 "2019-06-06T16:41:37Z")

</div>

how about a router image for the N-2

turning it into a router using 4x usb to Ethernet adapter cables  
having the onboard Ethernet port as the wan input

something gui based if at all possible…

i have not checked but is there a diet-pi image for the N-2

---

<div class="post-metadata">

**Author:** ![MichaIng](https://dietpi.com/forum/user_avatar/dietpi.com/michaing/32/7_2.png) [@MichaIng](https://dietpi.com/forum/u/MichaIng)\
**Post date:** [9 June 2019 19:56 UTC](https://dietpi.com/forum/t/router-image-for-n-2/3252/2 "2019-06-09T19:56:51Z")

</div>

phaseshifter  
Odroid N2 beta image available: [https://dietpi.com/](https://dietpi.com/)

We will not create pre-installed router images but using e.g. the WiFi Hotspot install options makes the device NAT capable. To allow other peers connecting via multiple Ethernet ports, custom interface setup e.g. via /etc/network/interfaces.d/ drop-in configs is required. At least the required routing table which defines the onboard Ethernet device as default route, is added by WiFi Hotspot setup.

It is a long term task do make dietpi-config more flexible in setting up multiple network adapters, just to note. But might take a while until we find the time to implement this.