# Raspi 4 WiFi Connection

**URL:** <https://dietpi.com/forum/t/raspi-4-wifi-connection/3979>\
**Category:** Troubleshooting\
**Created:** [5 April 2020 11:47 UTC](https://dietpi.com/forum/t/raspi-4-wifi-connection/3979 "2020-04-05T11:47:57Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![wahono77](https://dietpi.com/forum/user_avatar/dietpi.com/wahono77/32/3034_2.png) [@wahono77](https://dietpi.com/forum/u/wahono77)\
**Post date:** [5 April 2020 11:47 UTC](https://dietpi.com/forum/t/raspi-4-wifi-connection/3979/1 "2020-04-05T11:47:57Z")

</div>

First step I install DietPi on RPI 4, I got prompt to connect WiFi, but when I set up from dietpi config, I got message :  
Unable to locate package crda  
Unable to locate package iw  
Unable to locate package wireless-tools,  
…

How to fix it?

thanks in advance

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [5 April 2020 12:04 UTC](https://dietpi.com/forum/t/raspi-4-wifi-connection/3979/2 "2020-04-05T12:04:05Z")

</div>

Hi,

short question. You downloaded a new image from [dietpi.com](http://dietpi.com) web site, flashed it. Than you do the first boot right? Are you connected to Ethernet at this moment? Do you like to use WiFi right from the beginning? If yes I would recommend to enable + pre-configure WiFi credentials etc via dietpi.txt + dietpi-wifi.txt before first boot, so the whole firstrun setup can be done as intended.

---

<div class="post-metadata">

**Author:** ![wahono77](https://dietpi.com/forum/user_avatar/dietpi.com/wahono77/32/3034_2.png) [@wahono77](https://dietpi.com/forum/u/wahono77)\
**Post date:** [5 April 2020 13:16 UTC](https://dietpi.com/forum/t/raspi-4-wifi-connection/3979/3 "2020-04-05T13:16:56Z")

</div>

Thanks Joulinar, it’s fixed now.  
😃

---

<div class="post-metadata">

**Author:** ![Joulinar](https://dietpi.com/forum/user_avatar/dietpi.com/joulinar/32/57_2.png) [@Joulinar](https://dietpi.com/forum/u/Joulinar)\
**Post date:** [5 April 2020 13:21 UTC](https://dietpi.com/forum/t/raspi-4-wifi-connection/3979/4 "2020-04-05T13:21:38Z")

</div>

so you used the files to pre-configure or how do you fixed it? It’s always good to know what was the fix as it might help other user as well 🙂