# Radxa ZERO 3W. Bluetooth not working
**URL:** https://dietpi.com/forum/t/radxa-zero-3w-bluetooth-not-working/20555
**Category:** Troubleshooting
**Created:** [23 June 2024 18:14 UTC](https://dietpi.com/forum/t/radxa-zero-3w-bluetooth-not-working/20555 "2024-06-23T18:14:36Z")
**Posts on this page:** 1
**Showing post:** 8
### Author:  [@ctmorgen](https://dietpi.com/forum/u/ctmorgen)
#### Post date: [17 July 2024 08:07 UTC](https://dietpi.com/forum/t/radxa-zero-3w-bluetooth-not-working/20555/8 "2024-07-17T08:07:12Z")
```auto
11.937857] fiq_debugger fiq_debugger.0: IRQ fiq not found
[11.937919] fiq_debugger fiq_debugger.0: IRQ wakeup not found
[11.937955] fiq_debugger_probe: could not install nmi irq handler
[13.784334] mpp-iep2 fdef0000.iep: allocate roi buffer failed
[13.803695] arm-scmi firmware:scmi: Failed. SCMI protocol 22 not active.
[13.824564] dwhdmi-rockchip fe0a0000.hdmi: IRQ index 1 not found
[14.196576] no ATF memory for init
[14.220970] no ATF memory for init
[14.232413] rk_gmac-dwmac fe010000.ethernet: no regulator found
[15.087320] Error: Driver ‘Goodix-TS’ is already registered, aborting…
[15.375903] rk817-battery rk817-battery: Failed to find matching dt id
[15.391051] rk817-charger rk817-charger: Failed to find matching dt id
[15.466134] OF: graph: no port node found in /i2c@fe5c0000/fusb302@22
[15.639379] arm-scmi firmware:scmi: Failed. SCMI protocol 17 not active.
[15.813816] mmc1: tuning execution failed: -5
[16.067026] mpp_rkvenc fdf40000.rkvenc: Failed to get leakage
[16.084069] mpp_rkvenc fdf40000.rkvenc: failed to find power_model node
[16.088127] mpp_rkvenc fdf40000.rkvenc: failed to initialize power model
[16.092076] mpp_rkvenc fdf40000.rkvenc: failed to get dynamic-coefficient
[16.109008] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_a is not found!
[16.112418] rkvdec2_init:1022: No niu aclk reset resource define
[16.115807] mpp_rkvdec2 fdf80200.rkvdec: shared_niu_h is not found!
[16.119196] rkvdec2_init:1025: No niu hclk reset resource define
[16.142487] mpp_rkvdec2 fdf80200.rkvdec: failed to find power_model node
[16.145416] mpp_rkvdec2 fdf80200.rkvdec: failed to initialize power model
[16.148308] mpp_rkvdec2 fdf80200.rkvdec: failed to get dynamic-coefficient
[16.174766] mali fde60000.gpu: IRQ JOB not found
[16.177485] mali fde60000.gpu: IRQ MMU not found
[16.180197] mali fde60000.gpu: IRQ GPU not found
[16.185309] mali fde60000.gpu: Insufficient register space, will override to the required size
[16.190414] mali fde60000.gpu: Register window unavailable
[16.195462] mali fde60000.gpu: Failed to map registers
[16.200511] mali fde60000.gpu: Register map failed error = -5
[16.205578] mali fde60000.gpu: Device initialization failed
[16.239961] rockchip-dmc dmc: failed to get vop pn to msch rl
[16.245877] rockchip-dmc dmc: could not find power_model node
[22.501573] aicbsp: sdio_err:: bus down
[23.226322] ieee80211 phy0:
*******************************************************
** CAUTION: USING PERMISSIVE CUSTOM REGULA
```
---
_[View the full topic](https://dietpi.com/forum/t/radxa-zero-3w-bluetooth-not-working/20555)._