# Radxa O6/O6N with dietpi

**URL:** <https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023>\
**Category:** General Discussion\
**Created:** [6 March 2026 11:16 UTC](https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023 "2026-03-06T11:16:12Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![disablewong](https://dietpi.com/forum/user_avatar/dietpi.com/disablewong/32/4487_2.png) [@disablewong](https://dietpi.com/forum/u/disablewong)\
**Post date:** [6 March 2026 11:16 UTC](https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023/1 "2026-03-06T11:16:12Z")

</div>

I’m recently playing with my Radxa O6n and it got a good performance!

```auto
eneric Device (aarch64) | IP: 192.168.1.217                                    
┌──────────────────────────────┤ DietPi-Config ├───────────────────────────────┐
│ DietPi-Benchmark | https://dietpi.com/survey#benchmark : │
│ - CPU Performance : Duration = 0.93 seconds (lower is faster) │
│ - CPU Temp : Idle = 36'c | Full load = 49'c │
│ - RootFS : Write = 29 MB/s | Read = 776 MB/s │
│ - RAM : Write = 2358 MB/s | Read = 4115 MB/s │
│ │
│ Additional benchmarks: │
│ - Custom Filesystem : Write = Not tested MB/s | Read = Not tested MB/s │
│ - Network LAN : Transfer rate = Not tested MB/s │
│ │
│ ●─ DietPi-Benchmark ------------------------------------ │
│ DietPi-Benchmark : Starts CPU, RAM and IO benchmark suite. Scores can be │
│ ●─ Additional benchmarks ------------------------------- │
│ Custom Filesystem : Benchmark IO performance from a selection of mounted d │
│ Network LAN : Benchmark LAN performance using 2 DietPi systems. │
│ │
│ │
│ <Select> <Back> │
│ │
└──────────────────────────────────────────────────────────────────────────────┘
                                                                                
                                                                                 

```

however, thing get strange when I’m using putty for serial connection, it randomly freeze the terminal and crash into some kind of loop. keyboard input and display are fine before loading up the kernel and go into dietpi itself.

The problem doesn’t exist in official image and in network ssh session.  
Does the dietpi installation script touched on the serial-console?

---

<div class="post-metadata">

**Author:** ![system](https://dietpi.com/forum/uploads/default/original/1X/7e1021de2213860bce185915ce2c1786e56490ec.png) [@system](https://dietpi.com/forum/u/system)\
**Post date:** [2 September 2026 11:16 UTC](https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023/2 "2026-09-02T11:16:59Z")

</div>

This topic was automatically closed 180 days after the last reply. New replies are no longer allowed.

---

<div class="post-metadata">

**Author:** ![MichaIng](https://dietpi.com/forum/user_avatar/dietpi.com/michaing/32/7_2.png) [@MichaIng](https://dietpi.com/forum/u/MichaIng)\
**Post date:** [8 November 2026 14:28 UTC](https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023/3 "2026-11-08T14:28:16Z")

</div>

Our Orange Pi 6 image should support it, as they use the same SoC with ACPI boot: [Orange Pi 6/6 Plus | Add initial support by MichaIng · Pull Request #8472 · MichaIng/DietPi · GitHub](https://github.com/MichaIng/DietPi/pull/8472)

But whether all hardware features work/are detectes correctly depends on the BIOS firmware.

The test image can be found here: [Index of /downloads/images/testing](https://dietpi.com/downloads/images/testing/)

---

<div class="post-metadata">

**Author:** ![MichaIng](https://dietpi.com/forum/user_avatar/dietpi.com/michaing/32/7_2.png) [@MichaIng](https://dietpi.com/forum/u/MichaIng)\
**Post date:** [8 November 2026 14:28 UTC](https://dietpi.com/forum/t/radxa-o6-o6n-with-dietpi/25023/4 "2026-11-08T14:28:23Z")

</div>